| Message ID | 1458762450-9538-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote: > This patch adds pmic regulator supplies connected on the board. > Rest of the invidual regulators would be added as and when required by > the devices. > I do think we should try to fill them all out, before they are needed. Especially so that people don't take the easy path of just copying pieces from some other 8064 dts to get going... But we can do that in a follow up if you prefer. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 55 ++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > index e96aab6..0a0bcfe 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > @@ -9,7 +9,62 @@ > serial1 = &gsbi1_serial; > }; > > + regulators { > + compatible = "simple-bus"; > + vph: regulator-fixed@1 { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <4500000>; > + regulator-max-microvolt = <4500000>; > + regulator-name = "VPH"; > + regulator-type = "voltage"; > + regulator-boot-on; > + }; > + }; > + > soc { > + rpm@108000 { > + regulators { > + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; > + vdd_l3_15_17-supply = <&vph>; > + vdd_l4_14-supply = <&vph>; > + vdd_l5_8_16-supply = <&vph>; > + vdd_l6_7-supply = <&vph>; > + vdd_l9_11-supply = <&vph>; > + vdd_l10_22-supply = <&vph>; > + vdd_l21_23_29-supply = <&vph>; > + vdd_l24-supply = <&pm8921_s1>; > + vdd_l25-supply = <&pm8921_s1>; > + vdd_l26-supply = <&pm8921_s7>; > + vdd_l27-supply = <&pm8921_s7>; > + vdd_l28-supply = <&pm8921_s7>; > + vin_lvs1_3_6-supply = <&pm8921_s4>; > + vin_lvs2-supply = <&pm8921_s1>; > + vin_lvs4_5_7-supply = <&pm8921_s4>; > + > + s1 { > + regulator-always-on; > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + qcom,switch-mode-frequency = <3200000>; > + bias-pull-down; > + }; > + > + s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,switch-mode-frequency = <3200000>; > + bias-pull-down; > + regulator-always-on; > + }; > + > + s7 { > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + qcom,switch-mode-frequency = <3200000>; > + }; > + }; > + }; > + > gsbi@12440000 { > status = "okay"; > qcom,mode = <GSBI_PROT_UART_W_FC>; > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On 29/03/16 15:37, Bjorn Andersson wrote: > On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote: > >> This patch adds pmic regulator supplies connected on the board. >> Rest of the invidual regulators would be added as and when required by >> the devices. >> > > I do think we should try to fill them all out, before they are needed. > Especially so that people don't take the easy path of just copying > pieces from some other 8064 dts to get going... I agree, But I want to make sure that all the regulators entires are tested before we actually see them in mainline. This would also deter someone adding nodes without any regulator dependencies. > > But we can do that in a follow up if you prefer. > > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> thanks for the Ack. --srini > > Regards, > Bjorn > >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 55 ++++++++++++++++++++++ >> 1 file changed, 55 insertions(+) >> >> diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts >> index e96aab6..0a0bcfe 100644 >> --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts >> +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts >> @@ -9,7 +9,62 @@ >> serial1 = &gsbi1_serial; >> }; >> >> + regulators { >> + compatible = "simple-bus"; >> + vph: regulator-fixed@1 { >> + compatible = "regulator-fixed"; >> + regulator-min-microvolt = <4500000>; >> + regulator-max-microvolt = <4500000>; >> + regulator-name = "VPH"; >> + regulator-type = "voltage"; >> + regulator-boot-on; >> + }; >> + }; >> + >> soc { >> + rpm@108000 { >> + regulators { >> + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; >> + vdd_l3_15_17-supply = <&vph>; >> + vdd_l4_14-supply = <&vph>; >> + vdd_l5_8_16-supply = <&vph>; >> + vdd_l6_7-supply = <&vph>; >> + vdd_l9_11-supply = <&vph>; >> + vdd_l10_22-supply = <&vph>; >> + vdd_l21_23_29-supply = <&vph>; >> + vdd_l24-supply = <&pm8921_s1>; >> + vdd_l25-supply = <&pm8921_s1>; >> + vdd_l26-supply = <&pm8921_s7>; >> + vdd_l27-supply = <&pm8921_s7>; >> + vdd_l28-supply = <&pm8921_s7>; >> + vin_lvs1_3_6-supply = <&pm8921_s4>; >> + vin_lvs2-supply = <&pm8921_s1>; >> + vin_lvs4_5_7-supply = <&pm8921_s4>; >> + >> + s1 { >> + regulator-always-on; >> + regulator-min-microvolt = <1225000>; >> + regulator-max-microvolt = <1225000>; >> + qcom,switch-mode-frequency = <3200000>; >> + bias-pull-down; >> + }; >> + >> + s4 { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + qcom,switch-mode-frequency = <3200000>; >> + bias-pull-down; >> + regulator-always-on; >> + }; >> + >> + s7 { >> + regulator-min-microvolt = <1300000>; >> + regulator-max-microvolt = <1300000>; >> + qcom,switch-mode-frequency = <3200000>; >> + }; >> + }; >> + }; >> + >> gsbi@12440000 { >> status = "okay"; >> qcom,mode = <GSBI_PROT_UART_W_FC>; >> -- >> 2.5.0 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts index e96aab6..0a0bcfe 100644 --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts @@ -9,7 +9,62 @@ serial1 = &gsbi1_serial; }; + regulators { + compatible = "simple-bus"; + vph: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-boot-on; + }; + }; + soc { + rpm@108000 { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l3_15_17-supply = <&vph>; + vdd_l4_14-supply = <&vph>; + vdd_l5_8_16-supply = <&vph>; + vdd_l6_7-supply = <&vph>; + vdd_l9_11-supply = <&vph>; + vdd_l10_22-supply = <&vph>; + vdd_l21_23_29-supply = <&vph>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_UART_W_FC>;
This patch adds pmic regulator supplies connected on the board. Rest of the invidual regulators would be added as and when required by the devices. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 55 ++++++++++++++++++++++ 1 file changed, 55 insertions(+)