| Message ID | 1459497178-31090-3-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Apr 01, 2016 at 08:52:57AM +0100, Srinivas Kandagatla wrote: > On some SOCs PORTS_IMPL register value is never programmed by the > firmware and left at zero value. Which means that no sata ports are > available for software. AHCI driver used to cope up with this by > fabricating the port_map if the PORTS_IMPL register is read zero, > but recent patch broke this workaround as zero value was valid for > NVMe disks. > > This patch adds ports-implemented DT bindings as workaround for this issue > in a way that DT can can override the PORTS_IMPL register in cases where > the firmware did not program it already. > > Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3) > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Acked-by: Tejun Heo <tj@kernel.org> > Reviewed-by: Andy Gross <andy.gross@linaro.org> > --- > Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 ++++ > drivers/ata/ahci_platform.c | 3 +++ > 2 files changed, 7 insertions(+) Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 30df832..87adfb2 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -32,6 +32,10 @@ Optional properties: - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" +- ports-implemented : Mask that indicates which ports that the HBA supports + are available for software to use. Useful if PORTS_IMPL + is not programmed by the BIOS, which is true with + some embedded SOC's. Required properties when using sub-nodes: - #address-cells : number of cells to encode an address diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 4044233..62a04c8 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -51,6 +51,9 @@ static int ahci_probe(struct platform_device *pdev) if (rc) return rc; + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->force_port_map); + if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci")) hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
On some SOCs PORTS_IMPL register value is never programmed by the firmware and left at zero value. Which means that no sata ports are available for software. AHCI driver used to cope up with this by fabricating the port_map if the PORTS_IMPL register is read zero, but recent patch broke this workaround as zero value was valid for NVMe disks. This patch adds ports-implemented DT bindings as workaround for this issue in a way that DT can can override the PORTS_IMPL register in cases where the firmware did not program it already. Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3) Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> --- Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 ++++ drivers/ata/ahci_platform.c | 3 +++ 2 files changed, 7 insertions(+)