| Message ID | 1459510156-9147-1-git-send-email-gautam.vivek@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 01-04-16, 16:59, Vivek Gautam wrote: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > --- > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Hi, On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote: > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) That would be allwinner in this case, sunxi is the SoC family Allwinner produces. Maxime
Hi, On Fri, Apr 1, 2016 at 4:42 AM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > Hi, > > On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote: >> create mode 100644 drivers/phy/sunxi/Kconfig >> create mode 100644 drivers/phy/sunxi/Makefile >> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) >> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > > That would be allwinner in this case, sunxi is the SoC family > Allwinner produces. Sure, will change this. I will change rcar --> renesas too. That should make the directory names homogeneous (vendor-name). Thanks for reviewing. > > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com
On Fri, Apr 1, 2016 at 4:39 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote: > On 01-04-16, 16:59, Vivek Gautam wrote: >> Adding vendor specific directories in phy to group >> phy drivers under their respective vendor umbrella. >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >> --- >> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 >> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 >> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) >> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) >> > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Thanks Viresh. > > -- > viresh > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. > > drivers/phy/Kconfig | 386 +--------------------- > drivers/phy/Makefile | 57 +--- > drivers/phy/bcom/Kconfig | 27 ++ > drivers/phy/bcom/Makefile | 3 + > drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 > drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 > drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 > drivers/phy/hisi/Kconfig | 20 ++ > drivers/phy/hisi/Makefile | 2 + > drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 > drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 > drivers/phy/marvell/Kconfig | 50 +++ > drivers/phy/marvell/Makefile | 6 + > drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 > drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 > drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 > drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 > drivers/phy/qcom/Kconfig | 23 ++ > drivers/phy/qcom/Makefile | 5 + > drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 > drivers/phy/rcar/Kconfig | 16 + > drivers/phy/rcar/Makefile | 2 + > drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 > drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 > drivers/phy/rockchip/Kconfig | 23 ++ > drivers/phy/rockchip/Makefile | 3 + > drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 > drivers/phy/samsung/Kconfig | 87 +++++ > drivers/phy/samsung/Makefile | 10 + > drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 > drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 > drivers/phy/st/Kconfig | 51 +++ > drivers/phy/st/Makefile | 6 + > drivers/phy/{ => st}/phy-miphy28lp.c | 0 > drivers/phy/{ => st}/phy-miphy365x.c | 0 > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > drivers/phy/{ => st}/phy-stih407-usb.c | 0 > drivers/phy/{ => st}/phy-stih41x-usb.c | 0 > drivers/phy/sunxi/Kconfig | 28 ++ > drivers/phy/sunxi/Makefile | 2 + > drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 > drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 > drivers/phy/ti/Kconfig | 67 ++++ > drivers/phy/ti/Makefile | 6 + > drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 > drivers/phy/{ => ti}/phy-omap-control.c | 0 > drivers/phy/{ => ti}/phy-omap-usb2.c | 0 > drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 > drivers/phy/{ => ti}/phy-tusb1210.c | 0 > drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 > drivers/phy/{ => ti}/ulpi_phy.h | 0 ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI driver. > 71 files changed, 464 insertions(+), 416 deletions(-) > create mode 100644 drivers/phy/bcom/Kconfig > create mode 100644 drivers/phy/bcom/Makefile > rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) > rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) > rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) > create mode 100644 drivers/phy/hisi/Kconfig > create mode 100644 drivers/phy/hisi/Makefile > rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) > rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) > create mode 100644 drivers/phy/marvell/Kconfig > create mode 100644 drivers/phy/marvell/Makefile > rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) > rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) > create mode 100644 drivers/phy/qcom/Kconfig > create mode 100644 drivers/phy/qcom/Makefile > rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) > create mode 100644 drivers/phy/rcar/Kconfig > create mode 100644 drivers/phy/rcar/Makefile > rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) > rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) > create mode 100644 drivers/phy/samsung/Kconfig > create mode 100644 drivers/phy/samsung/Makefile > rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) > create mode 100644 drivers/phy/st/Kconfig > create mode 100644 drivers/phy/st/Makefile > rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) > rename drivers/phy/{ => st}/phy-miphy365x.c (100%) > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) > rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > create mode 100644 drivers/phy/ti/Kconfig > create mode 100644 drivers/phy/ti/Makefile > rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) > rename drivers/phy/{ => ti}/phy-omap-control.c (100%) > rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) > rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) > rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) > rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) > rename drivers/phy/{ => ti}/ulpi_phy.h (100%) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..80c8c68 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,45 +15,6 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > +menuconfig PHY_PLAT > + bool "Platform Phy drivers" Not really convinced about adding a new config here. This will create new dependencies and will also start breaking users of oldconfig. Also not all of them are platform drivers (e.g ULPI PHY drivers). Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote: > Hi, > > On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote: >> Adding vendor specific directories in phy to group >> phy drivers under their respective vendor umbrella. >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >> --- >> >> With growing number of phy drivers, it makes sense to >> group these drivers under their respective vendor/platform >> umbrella directory. >> >> Build-tested 'multi_v7_defconfig'. >> >> drivers/phy/Kconfig | 386 +--------------------- >> drivers/phy/Makefile | 57 +--- >> drivers/phy/bcom/Kconfig | 27 ++ >> drivers/phy/bcom/Makefile | 3 + >> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 >> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 >> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 >> drivers/phy/hisi/Kconfig | 20 ++ >> drivers/phy/hisi/Makefile | 2 + >> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 >> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 >> drivers/phy/marvell/Kconfig | 50 +++ >> drivers/phy/marvell/Makefile | 6 + >> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 >> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 >> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 >> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 >> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 >> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 >> drivers/phy/qcom/Kconfig | 23 ++ >> drivers/phy/qcom/Makefile | 5 + >> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 >> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 >> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 >> drivers/phy/rcar/Kconfig | 16 + >> drivers/phy/rcar/Makefile | 2 + >> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 >> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 >> drivers/phy/rockchip/Kconfig | 23 ++ >> drivers/phy/rockchip/Makefile | 3 + >> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 >> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 >> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 >> drivers/phy/samsung/Kconfig | 87 +++++ >> drivers/phy/samsung/Makefile | 10 + >> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 >> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 >> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 >> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 >> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 >> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 >> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 >> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 >> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 >> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 >> drivers/phy/st/Kconfig | 51 +++ >> drivers/phy/st/Makefile | 6 + >> drivers/phy/{ => st}/phy-miphy28lp.c | 0 >> drivers/phy/{ => st}/phy-miphy365x.c | 0 >> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 >> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 >> drivers/phy/{ => st}/phy-stih407-usb.c | 0 >> drivers/phy/{ => st}/phy-stih41x-usb.c | 0 >> drivers/phy/sunxi/Kconfig | 28 ++ >> drivers/phy/sunxi/Makefile | 2 + >> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 >> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 >> drivers/phy/ti/Kconfig | 67 ++++ >> drivers/phy/ti/Makefile | 6 + >> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 >> drivers/phy/{ => ti}/phy-omap-control.c | 0 >> drivers/phy/{ => ti}/phy-omap-usb2.c | 0 >> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 >> drivers/phy/{ => ti}/phy-tusb1210.c | 0 >> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 >> drivers/phy/{ => ti}/ulpi_phy.h | 0 > > ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI > driver. Yes, you are right. But i was hesitant to add a multi-level header file include in the phy driver which uses it. Does it makes sense to move this ulpi_phy.h to include/linux/phy ? >> 71 files changed, 464 insertions(+), 416 deletions(-) >> create mode 100644 drivers/phy/bcom/Kconfig >> create mode 100644 drivers/phy/bcom/Makefile >> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) >> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) >> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) >> create mode 100644 drivers/phy/hisi/Kconfig >> create mode 100644 drivers/phy/hisi/Makefile >> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) >> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) >> create mode 100644 drivers/phy/marvell/Kconfig >> create mode 100644 drivers/phy/marvell/Makefile >> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) >> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) >> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) >> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) >> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) >> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) >> create mode 100644 drivers/phy/qcom/Kconfig >> create mode 100644 drivers/phy/qcom/Makefile >> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) >> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) >> create mode 100644 drivers/phy/rcar/Kconfig >> create mode 100644 drivers/phy/rcar/Makefile >> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) >> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) >> create mode 100644 drivers/phy/rockchip/Kconfig >> create mode 100644 drivers/phy/rockchip/Makefile >> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) >> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) >> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) >> create mode 100644 drivers/phy/samsung/Kconfig >> create mode 100644 drivers/phy/samsung/Makefile >> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) >> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) >> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) >> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) >> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) >> create mode 100644 drivers/phy/st/Kconfig >> create mode 100644 drivers/phy/st/Makefile >> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) >> rename drivers/phy/{ => st}/phy-miphy365x.c (100%) >> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) >> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) >> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) >> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) >> create mode 100644 drivers/phy/sunxi/Kconfig >> create mode 100644 drivers/phy/sunxi/Makefile >> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) >> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) >> create mode 100644 drivers/phy/ti/Kconfig >> create mode 100644 drivers/phy/ti/Makefile >> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) >> rename drivers/phy/{ => ti}/phy-omap-control.c (100%) >> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) >> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) >> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) >> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) >> rename drivers/phy/{ => ti}/ulpi_phy.h (100%) >> >> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >> index 26566db..80c8c68 100644 >> --- a/drivers/phy/Kconfig >> +++ b/drivers/phy/Kconfig >> @@ -15,45 +15,6 @@ config GENERIC_PHY >> phy users can obtain reference to the PHY. All the users of this >> framework should select this config. >> > >> +menuconfig PHY_PLAT >> + bool "Platform Phy drivers" > > Not really convinced about adding a new config here. This will create new > dependencies and will also start breaking users of oldconfig. This serves including all the directory paths in the 'make' for driver/phy/Makefile. Otherwise each directory will have to be built as per particular platform And, not all drivers of a vendor are built for one-kind of platform, for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210 Similarly, Broadcom phy drivers are based on multiple platforms, and so does Marvell's. Please suggest a concise way to include the vendor directories in the build path in drivers/phy/Makefile. > > Also not all of them are platform drivers (e.g ULPI PHY drivers). I Think this applies to ulpi_phy only at this moment, which we can resolve by moving that to include/linux path. > > Thanks > Kishon > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> I don't have a preference about the phy-locations either way, so for Rockchip phys Acked-by: Heiko Stuebner <heiko@sntech.de> > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. > > drivers/phy/Kconfig | 386 > +--------------------- drivers/phy/Makefile > | 57 +--- > drivers/phy/bcom/Kconfig | 27 ++ > drivers/phy/bcom/Makefile | 3 + > drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 > drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 > drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 > drivers/phy/hisi/Kconfig | 20 ++ > drivers/phy/hisi/Makefile | 2 + > drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 > drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 > drivers/phy/marvell/Kconfig | 50 +++ > drivers/phy/marvell/Makefile | 6 + > drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 > drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 > drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 > drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 > drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 > drivers/phy/qcom/Kconfig | 23 ++ > drivers/phy/qcom/Makefile | 5 + > drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 > drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 > drivers/phy/rcar/Kconfig | 16 + > drivers/phy/rcar/Makefile | 2 + > drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 > drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 > drivers/phy/rockchip/Kconfig | 23 ++ > drivers/phy/rockchip/Makefile | 3 + > drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 > drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 > drivers/phy/samsung/Kconfig | 87 +++++ > drivers/phy/samsung/Makefile | 10 + > drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 > drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 > drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 > drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 > drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 > drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 > drivers/phy/st/Kconfig | 51 +++ > drivers/phy/st/Makefile | 6 + > drivers/phy/{ => st}/phy-miphy28lp.c | 0 > drivers/phy/{ => st}/phy-miphy365x.c | 0 > drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 > drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 > drivers/phy/{ => st}/phy-stih407-usb.c | 0 > drivers/phy/{ => st}/phy-stih41x-usb.c | 0 > drivers/phy/sunxi/Kconfig | 28 ++ > drivers/phy/sunxi/Makefile | 2 + > drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 > drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 > drivers/phy/ti/Kconfig | 67 ++++ > drivers/phy/ti/Makefile | 6 + > drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 > drivers/phy/{ => ti}/phy-omap-control.c | 0 > drivers/phy/{ => ti}/phy-omap-usb2.c | 0 > drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 > drivers/phy/{ => ti}/phy-tusb1210.c | 0 > drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 > drivers/phy/{ => ti}/ulpi_phy.h | 0 > 71 files changed, 464 insertions(+), 416 deletions(-) > create mode 100644 drivers/phy/bcom/Kconfig > create mode 100644 drivers/phy/bcom/Makefile > rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) > rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) > rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) > create mode 100644 drivers/phy/hisi/Kconfig > create mode 100644 drivers/phy/hisi/Makefile > rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) > rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) > create mode 100644 drivers/phy/marvell/Kconfig > create mode 100644 drivers/phy/marvell/Makefile > rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) > rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) > rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) > create mode 100644 drivers/phy/qcom/Kconfig > create mode 100644 drivers/phy/qcom/Makefile > rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) > rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) > create mode 100644 drivers/phy/rcar/Kconfig > create mode 100644 drivers/phy/rcar/Makefile > rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) > rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) > create mode 100644 drivers/phy/rockchip/Kconfig > create mode 100644 drivers/phy/rockchip/Makefile > rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) > rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) > create mode 100644 drivers/phy/samsung/Kconfig > create mode 100644 drivers/phy/samsung/Makefile > rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) > rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) > rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) > create mode 100644 drivers/phy/st/Kconfig > create mode 100644 drivers/phy/st/Makefile > rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) > rename drivers/phy/{ => st}/phy-miphy365x.c (100%) > rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) > rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) > rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) > rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) > create mode 100644 drivers/phy/sunxi/Kconfig > create mode 100644 drivers/phy/sunxi/Makefile > rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) > rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) > create mode 100644 drivers/phy/ti/Kconfig > create mode 100644 drivers/phy/ti/Makefile > rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) > rename drivers/phy/{ => ti}/phy-omap-control.c (100%) > rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) > rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) > rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) > rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) > rename drivers/phy/{ => ti}/ulpi_phy.h (100%) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 26566db..80c8c68 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -15,45 +15,6 @@ config GENERIC_PHY > phy users can obtain reference to the PHY. All the users of this > framework should select this config. > > -config PHY_BERLIN_USB > - tristate "Marvell Berlin USB PHY Driver" > - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the USB PHY on Marvell Berlin SoCs. > - > -config PHY_BERLIN_SATA > - tristate "Marvell Berlin SATA PHY driver" > - depends on ARCH_BERLIN && HAS_IOMEM && OF > - select GENERIC_PHY > - help > - Enable this to support the SATA PHY on Marvell Berlin SoCs. > - > -config ARMADA375_USBCLUSTER_PHY > - def_bool y > - depends on MACH_ARMADA_375 || COMPILE_TEST > - depends on OF && HAS_IOMEM > - select GENERIC_PHY > - > -config PHY_DM816X_USB > - tristate "TI dm816x USB PHY driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this for dm816x USB to work. > - > -config PHY_EXYNOS_MIPI_VIDEO > - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > - depends on HAS_IOMEM > - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > - select GENERIC_PHY > - default y if ARCH_S5PV210 || ARCH_EXYNOS > - help > - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > - and EXYNOS SoCs. > - > config PHY_LPC18XX_USB_OTG > tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" > depends on OF && (ARCH_LPC18XX || COMPILE_TEST) > @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG > This driver is need for USB0 support on LPC18xx/43xx and takes > care of enabling and clock setup. > > -config PHY_PXA_28NM_HSIC > - tristate "Marvell USB HSIC 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB HSIC PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell ehci driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_PXA_28NM_USB2 > - tristate "Marvell USB 2.0 28nm PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support Marvell USB 2.0 PHY driver for Marvell > - SoC. This driver will do the PHY initialization and shutdown. > - The PHY driver will be used by Marvell udc/ehci/otg driver. > - > - To compile this driver as a module, choose M here. > - > -config PHY_MVEBU_SATA > - def_bool y > - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > - depends on OF > - select GENERIC_PHY > - > -config PHY_MIPHY28LP > - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > - that is part of STMicroelectronics STiH407 SoC. > - > -config PHY_MIPHY365X > - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > - depends on ARCH_STI > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the miphy transceiver (for SATA/PCIE) > - that is part of STMicroelectronics STiH41x SoC series. > - > -config PHY_RCAR_GEN2 > - tristate "Renesas R-Car generation 2 USB PHY driver" > - depends on ARCH_SHMOBILE > - depends on GENERIC_PHY > - help > - Support for USB PHY found on Renesas R-Car generation 2 SoCs. > - > -config PHY_RCAR_GEN3_USB2 > - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > - depends on OF && ARCH_SHMOBILE > - select GENERIC_PHY > - help > - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > - > -config OMAP_CONTROL_PHY > - tristate "OMAP CONTROL PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - help > - Enable this to add support for the PHY part present in the control > - module. This driver has API to power on the USB2 PHY and to write to > - the mailbox. The mailbox is present only in omap4 and the register to > - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > - additional register to power on USB3 PHY/SATA PHY/PCIE PHY > - (PIPE3 PHY). > - > -config OMAP_USB2 > - tristate "OMAP USB2 PHY Driver" > - depends on ARCH_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the transceiver that is part of SOC. This > - driver takes care of all the PHY functionality apart from comparator. > - The USB OTG controller communicates with the comparator using this > - driver. > - > -config TI_PIPE3 > - tristate "TI PIPE3 PHY Driver" > - depends on ARCH_OMAP2PLUS || COMPILE_TEST > - select GENERIC_PHY > - select OMAP_CONTROL_PHY > - depends on OMAP_OCP2SCP > - help > - Enable this to support the PIPE3 PHY that is part of TI SOCs. This > - driver takes care of all the PHY functionality apart from comparator. > - This driver interacts with the "OMAP Control PHY Driver" to power > - on/off the PHY. > - > -config TWL4030_USB > - tristate "TWL4030 USB Transceiver Driver" > - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > - depends on USB_SUPPORT > - select GENERIC_PHY > - select USB_PHY > - help > - Enable this to support the USB OTG transceiver on TWL4030 > - family chips (including the TWL5030 and TPS659x0 devices). > - This transceiver supports high and full speed devices plus, > - in host mode, low speed. > - > -config PHY_EXYNOS_DP_VIDEO > - tristate "EXYNOS SoC series Display Port PHY driver" > - depends on OF > - depends on ARCH_EXYNOS || COMPILE_TEST > - default ARCH_EXYNOS > - select GENERIC_PHY > - help > - Support for Display Port PHY found on Samsung EXYNOS SoCs. > - > -config BCM_KONA_USB2_PHY > - tristate "Broadcom Kona USB2 PHY Driver" > - depends on HAS_IOMEM > - select GENERIC_PHY > - help > - Enable this to support the Broadcom Kona USB 2.0 PHY. > - > -config PHY_EXYNOS5250_SATA > - tristate "Exynos5250 Sata SerDes/PHY driver" > - depends on SOC_EXYNOS5250 > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - select I2C > - select I2C_S3C2410 > - select MFD_SYSCON > - help > - Enable this to support SATA SerDes/Phy found on Samsung's > - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > - port to accept one SATA device. > - > -config PHY_HIX5HD2_SATA > - tristate "HIX5HD2 SATA PHY Driver" > - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Support for SATA PHY on Hisilicon hix5hd2 Soc. > - > config PHY_MT65XX_USB3 > tristate "Mediatek USB3.0 PHY Driver" > depends on ARCH_MEDIATEK && OF > @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3 > for mt65xx SoCs. it supports two usb2.0 ports and > one usb3.0 port. > > -config PHY_HI6220_USB > - tristate "hi6220 USB PHY support" > - depends on (ARCH_HISI && ARM64) || COMPILE_TEST > - select GENERIC_PHY > - select MFD_SYSCON > - help > - Enable this to support the HISILICON HI6220 USB PHY. > - > - To compile this driver as a module, choose M here. > - > -config PHY_SUN4I_USB > - tristate "Allwinner sunxi SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on EXTCON > - depends on POWER_SUPPLY > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sunxi SoCs. > - > - This driver controls the entire USB PHY block, both the USB OTG > - parts, as well as the 2 regular USB 2 host PHYs. > - > -config PHY_SUN9I_USB > - tristate "Allwinner sun9i SoC USB PHY driver" > - depends on ARCH_SUNXI && HAS_IOMEM && OF > - depends on RESET_CONTROLLER > - depends on USB_COMMON > - select GENERIC_PHY > - help > - Enable this to support the transceiver that is part of Allwinner > - sun9i SoCs. > - > - This driver controls each individual USB 2 host PHY. > - > -config PHY_SAMSUNG_USB2 > - tristate "Samsung USB 2.0 PHY driver" > - depends on HAS_IOMEM > - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > - select GENERIC_PHY > - select MFD_SYSCON > - default ARCH_EXYNOS > - help > - Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > - for particular PHYs will be enabled based on the SoC type in addition > - to this driver. > - > -config PHY_S5PV210_USB2 > - bool "Support for S5PV210" > - depends on PHY_SAMSUNG_USB2 > - depends on ARCH_S5PV210 > - help > - Enable USB PHY support for S5PV210. This option requires that Samsung > - USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of S5PV210 two phys > - are available - device and host. > - > -config PHY_EXYNOS4210_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default CPU_EXYNOS4210 > - > -config PHY_EXYNOS4X12_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > - > -config PHY_EXYNOS5250_USB2 > - bool > - depends on PHY_SAMSUNG_USB2 > - default SOC_EXYNOS5250 || SOC_EXYNOS5420 > - > -config PHY_EXYNOS5_USBDRD > - tristate "Exynos5 SoC series USB DRD PHY driver" > - depends on ARCH_EXYNOS && OF > - depends on HAS_IOMEM > - depends on USB_DWC3_EXYNOS > - select GENERIC_PHY > - select MFD_SYSCON > - default y > - help > - Enable USB DRD PHY support for Exynos 5 SoC series. > - This driver provides PHY interface for USB 3.0 DRD controller > - present on Exynos5 SoC series. > - > config PHY_PISTACHIO_USB > tristate "IMG Pistachio USB2.0 PHY driver" > depends on MACH_PISTACHIO > @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB > help > Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. > > -config PHY_QCOM_APQ8064_SATA > - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_QCOM_IPQ806X_SATA > - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > - depends on ARCH_QCOM > - depends on HAS_IOMEM > - depends on OF > - select GENERIC_PHY > - > -config PHY_ROCKCHIP_USB > - tristate "Rockchip USB2 PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip USB 2.0 PHY. > - > -config PHY_ROCKCHIP_EMMC > - tristate "Rockchip EMMC PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip EMMC PHY. > - > -config PHY_ROCKCHIP_DP > - tristate "Rockchip Display Port PHY Driver" > - depends on ARCH_ROCKCHIP && OF > - select GENERIC_PHY > - help > - Enable this to support the Rockchip Display Port PHY. > - > -config PHY_ST_SPEAR1310_MIPHY > - tristate "ST SPEAR1310-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1310 || COMPILE_TEST > - help > - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > - > -config PHY_ST_SPEAR1340_MIPHY > - tristate "ST SPEAR1340-MIPHY driver" > - select GENERIC_PHY > - depends on MACH_SPEAR1340 || COMPILE_TEST > - help > - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > - > config PHY_XGENE > tristate "APM X-Gene 15Gbps PHY support" > depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) > @@ -372,53 +49,20 @@ config PHY_XGENE > help > This option enables support for APM X-Gene SoC multi-purpose PHY. > > -config PHY_STIH407_USB > - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > - depends on RESET_CONTROLLER > - depends on ARCH_STI || COMPILE_TEST > - select GENERIC_PHY > - help > - Enable this support to enable the picoPHY device used by USB2 > - and USB3 controllers on STMicroelectronics STiH407 SoC families. > - > -config PHY_STIH41X_USB > - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > - depends on ARCH_STI > - select GENERIC_PHY > - help > - Enable this to support the USB transceiver that is part of > - STMicroelectronics STiH41x SoC series. > - > -config PHY_QCOM_UFS > - tristate "Qualcomm UFS PHY driver" > - depends on OF && ARCH_QCOM > - select GENERIC_PHY > - help > - Support for UFS PHY on QCOM chipsets. > - > -config PHY_TUSB1210 > - tristate "TI TUSB1210 ULPI PHY module" > - depends on USB_ULPI_BUS > - select GENERIC_PHY > - help > - Support for TI TUSB1210 USB ULPI PHY. > - > -config PHY_BRCMSTB_SATA > - tristate "Broadcom STB SATA PHY driver" > - depends on ARCH_BRCMSTB || BMIPS_GENERIC > - depends on OF > - select GENERIC_PHY > - help > - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. > - > -config PHY_CYGNUS_PCIE > - tristate "Broadcom Cygnus PCIe PHY driver" > - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > - select GENERIC_PHY > - default ARCH_BCM_CYGNUS > - help > - Enable this to support the Broadcom Cygnus PCIe PHY. > - If unsure, say N. > +menuconfig PHY_PLAT > + bool "Platform Phy drivers" > + > +if PHY_PLAT > +source "drivers/phy/bcom/Kconfig" > +source "drivers/phy/hisi/Kconfig" > +source "drivers/phy/marvell/Kconfig" > +source "drivers/phy/qcom/Kconfig" > +source "drivers/phy/rcar/Kconfig" > +source "drivers/phy/rockchip/Kconfig" > +source "drivers/phy/samsung/Kconfig" > +source "drivers/phy/st/Kconfig" > +source "drivers/phy/sunxi/Kconfig" > +source "drivers/phy/ti/Kconfig" > +endif > > endmenu > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index 24596a9..73d563b 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -3,52 +3,19 @@ > # > > obj-$(CONFIG_GENERIC_PHY) += phy-core.o > -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o > -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o > -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > -phy-exynos-usb2-y += phy-samsung-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o > -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o > -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o > -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o > -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > + > +# Phy drivers for different platforms. > +obj-$(CONFIG_PHY_PLAT) += bcom/ \ > + hisi/ \ > + marvell/ \ > + qcom/ \ > + rcar/ \ > + rockchip/ \ > + samsung/ \ > + st/ \ > + sunxi/ \ > + ti/ > diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig > new file mode 100644 > index 0000000..8243372 > --- /dev/null > +++ b/drivers/phy/bcom/Kconfig > @@ -0,0 +1,27 @@ > +# > +# PHY drivers for Broadcom platforms > +# > +config PHY_CYGNUS_PCIE > + tristate "Broadcom Cygnus PCIe PHY driver" > + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) > + select GENERIC_PHY > + default ARCH_BCM_CYGNUS > + help > + Enable this to support the Broadcom Cygnus PCIe PHY. > + If unsure, say N. > + > +config BCM_KONA_USB2_PHY > + tristate "Broadcom Kona USB2 PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support the Broadcom Kona USB 2.0 PHY. > + > +config PHY_BRCMSTB_SATA > + tristate "Broadcom STB SATA PHY driver" > + depends on ARCH_BRCMSTB || BMIPS_GENERIC > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB > SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. > diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile > new file mode 100644 > index 0000000..f30fa76 > --- /dev/null > +++ b/drivers/phy/bcom/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o > +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o > diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c > b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100% > rename from drivers/phy/phy-bcm-cygnus-pcie.c > rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c > diff --git a/drivers/phy/phy-bcm-kona-usb2.c > b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100% > rename from drivers/phy/phy-bcm-kona-usb2.c > rename to drivers/phy/bcom/phy-bcm-kona-usb2.c > diff --git a/drivers/phy/phy-brcmstb-sata.c > b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100% > rename from drivers/phy/phy-brcmstb-sata.c > rename to drivers/phy/bcom/phy-brcmstb-sata.c > diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig > new file mode 100644 > index 0000000..affa9ed > --- /dev/null > +++ b/drivers/phy/hisi/Kconfig > @@ -0,0 +1,20 @@ > +# > +# PHY drivers for HiSilicon platforms > +# > +config PHY_HIX5HD2_SATA > + tristate "HIX5HD2 SATA PHY Driver" > + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Support for SATA PHY on Hisilicon hix5hd2 Soc. > + > +config PHY_HI6220_USB > + tristate "hi6220 USB PHY support" > + depends on (ARCH_HISI && ARM64) || COMPILE_TEST > + select GENERIC_PHY > + select MFD_SYSCON > + help > + Enable this to support the HISILICON HI6220 USB PHY. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile > new file mode 100644 > index 0000000..6059ed8 > --- /dev/null > +++ b/drivers/phy/hisi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o > +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o > diff --git a/drivers/phy/phy-hi6220-usb.c > b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100% > rename from drivers/phy/phy-hi6220-usb.c > rename to drivers/phy/hisi/phy-hi6220-usb.c > diff --git a/drivers/phy/phy-hix5hd2-sata.c > b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100% > rename from drivers/phy/phy-hix5hd2-sata.c > rename to drivers/phy/hisi/phy-hix5hd2-sata.c > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig > new file mode 100644 > index 0000000..6c1576c > --- /dev/null > +++ b/drivers/phy/marvell/Kconfig > @@ -0,0 +1,50 @@ > +# > +# PHY drivers for Marvell platforms > +# > +config ARMADA375_USBCLUSTER_PHY > + def_bool y > + depends on MACH_ARMADA_375 || COMPILE_TEST > + depends on OF && HAS_IOMEM > + select GENERIC_PHY > + > +config PHY_BERLIN_USB > + tristate "Marvell Berlin USB PHY Driver" > + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the USB PHY on Marvell Berlin SoCs. > + > +config PHY_BERLIN_SATA > + tristate "Marvell Berlin SATA PHY driver" > + depends on ARCH_BERLIN && HAS_IOMEM && OF > + select GENERIC_PHY > + help > + Enable this to support the SATA PHY on Marvell Berlin SoCs. > + > +config PHY_MVEBU_SATA > + def_bool y > + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD > + depends on OF > + select GENERIC_PHY > + > +config PHY_PXA_28NM_HSIC > + tristate "Marvell USB HSIC 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB HSIC PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell ehci driver. > + > + To compile this driver as a module, choose M here. > + > +config PHY_PXA_28NM_USB2 > + tristate "Marvell USB 2.0 28nm PHY Driver" > + depends on HAS_IOMEM > + select GENERIC_PHY > + help > + Enable this to support Marvell USB 2.0 PHY driver for Marvell > + SoC. This driver will do the PHY initialization and shutdown. > + The PHY driver will be used by Marvell udc/ehci/otg driver. > + > + To compile this driver as a module, choose M here. > diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile > new file mode 100644 > index 0000000..f4fa255 > --- /dev/null > +++ b/drivers/phy/marvell/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o > +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o > +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o > diff --git a/drivers/phy/phy-armada375-usb2.c > b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% > rename from drivers/phy/phy-armada375-usb2.c > rename to drivers/phy/marvell/phy-armada375-usb2.c > diff --git a/drivers/phy/phy-berlin-sata.c > b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% > rename from drivers/phy/phy-berlin-sata.c > rename to drivers/phy/marvell/phy-berlin-sata.c > diff --git a/drivers/phy/phy-berlin-usb.c > b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% > rename from drivers/phy/phy-berlin-usb.c > rename to drivers/phy/marvell/phy-berlin-usb.c > diff --git a/drivers/phy/phy-mvebu-sata.c > b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% > rename from drivers/phy/phy-mvebu-sata.c > rename to drivers/phy/marvell/phy-mvebu-sata.c > diff --git a/drivers/phy/phy-pxa-28nm-hsic.c > b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-hsic.c > rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c > diff --git a/drivers/phy/phy-pxa-28nm-usb2.c > b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% > rename from drivers/phy/phy-pxa-28nm-usb2.c > rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c > diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig > new file mode 100644 > index 0000000..9718d01 > --- /dev/null > +++ b/drivers/phy/qcom/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Qualcomm platforms > +# > +config PHY_QCOM_APQ8064_SATA > + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_IPQ806X_SATA > + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" > + depends on ARCH_QCOM > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + > +config PHY_QCOM_UFS > + tristate "Qualcomm UFS PHY driver" > + depends on OF && ARCH_QCOM > + select GENERIC_PHY > + help > + Support for UFS PHY on QCOM chipsets. > diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile > new file mode 100644 > index 0000000..2db3e77 > --- /dev/null > +++ b/drivers/phy/qcom/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o > +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \ > + += phy-qcom-ufs-qmp-20nm.o \ > + += phy-qcom-ufs-qmp-14nm.o > diff --git a/drivers/phy/phy-qcom-apq8064-sata.c > b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-apq8064-sata.c > rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c > diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c > b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100% > rename from drivers/phy/phy-qcom-ipq806x-sata.c > rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c > diff --git a/drivers/phy/phy-qcom-ufs-i.h > b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-i.h > rename to drivers/phy/qcom/phy-qcom-ufs-i.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h > b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100% > rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h > rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c > similarity index 100% > rename from drivers/phy/phy-qcom-ufs.c > rename to drivers/phy/qcom/phy-qcom-ufs.c > diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig > new file mode 100644 > index 0000000..169b5e2 > --- /dev/null > +++ b/drivers/phy/rcar/Kconfig > @@ -0,0 +1,16 @@ > +# > +# PHY drivers for Renesas's r-car platforms > +# > +config PHY_RCAR_GEN2 > + tristate "Renesas R-Car generation 2 USB PHY driver" > + depends on ARCH_SHMOBILE > + depends on GENERIC_PHY > + help > + Support for USB PHY found on Renesas R-Car generation 2 SoCs. > + > +config PHY_RCAR_GEN3_USB2 > + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" > + depends on OF && ARCH_SHMOBILE > + select GENERIC_PHY > + help > + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. > diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile > new file mode 100644 > index 0000000..695241a > --- /dev/null > +++ b/drivers/phy/rcar/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o > +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o > diff --git a/drivers/phy/phy-rcar-gen2.c > b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen2.c > rename to drivers/phy/rcar/phy-rcar-gen2.c > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c > b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100% > rename from drivers/phy/phy-rcar-gen3-usb2.c > rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > new file mode 100644 > index 0000000..c575d1e > --- /dev/null > +++ b/drivers/phy/rockchip/Kconfig > @@ -0,0 +1,23 @@ > +# > +# PHY drivers for Rockchip platforms > +# > +config PHY_ROCKCHIP_USB > + tristate "Rockchip USB2 PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip USB 2.0 PHY. > + > +config PHY_ROCKCHIP_EMMC > + tristate "Rockchip EMMC PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip EMMC PHY. > + > +config PHY_ROCKCHIP_DP > + tristate "Rockchip Display Port PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip Display Port PHY. > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > new file mode 100644 > index 0000000..c15acc1 > --- /dev/null > +++ b/drivers/phy/rockchip/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o > +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o > +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/phy-rockchip-dp.c > b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% > rename from drivers/phy/phy-rockchip-dp.c > rename to drivers/phy/rockchip/phy-rockchip-dp.c > diff --git a/drivers/phy/phy-rockchip-emmc.c > b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% > rename from drivers/phy/phy-rockchip-emmc.c > rename to drivers/phy/rockchip/phy-rockchip-emmc.c > diff --git a/drivers/phy/phy-rockchip-usb.c > b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% > rename from drivers/phy/phy-rockchip-usb.c > rename to drivers/phy/rockchip/phy-rockchip-usb.c > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig > new file mode 100644 > index 0000000..80bdea7 > --- /dev/null > +++ b/drivers/phy/samsung/Kconfig > @@ -0,0 +1,87 @@ > +# > +# PHY drivers for Samsung platforms > +# > +config PHY_SAMSUNG_USB2 > + tristate "Samsung USB 2.0 PHY driver" > + depends on HAS_IOMEM > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > + select GENERIC_PHY > + select MFD_SYSCON > + default ARCH_EXYNOS > + help > + Enable this to support the Samsung USB 2.0 PHY driver for Samsung > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in addition > + to this driver. > + > +config PHY_S5PV210_USB2 > + bool "Support for S5PV210" > + depends on PHY_SAMSUNG_USB2 > + depends on ARCH_S5PV210 > + help > + Enable USB PHY support for S5PV210. This option requires that Samsung > + USB 2.0 PHY driver is enabled and means that support for this > + particular SoC is compiled in the driver. In case of S5PV210 two phys > + are available - device and host. > + > +config PHY_EXYNOS4210_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default CPU_EXYNOS4210 > + > +config PHY_EXYNOS4X12_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 > + > +config PHY_EXYNOS5250_USB2 > + bool > + depends on PHY_SAMSUNG_USB2 > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > + > +config PHY_EXYNOS5_USBDRD > + tristate "Exynos5 SoC series USB DRD PHY driver" > + depends on ARCH_EXYNOS && OF > + depends on HAS_IOMEM > + depends on USB_DWC3_EXYNOS > + select GENERIC_PHY > + select MFD_SYSCON > + default y > + help > + Enable USB DRD PHY support for Exynos 5 SoC series. > + This driver provides PHY interface for USB 3.0 DRD controller > + present on Exynos5 SoC series. > + > +config PHY_EXYNOS_DP_VIDEO > + tristate "EXYNOS SoC series Display Port PHY driver" > + depends on OF > + depends on ARCH_EXYNOS || COMPILE_TEST > + default ARCH_EXYNOS > + select GENERIC_PHY > + help > + Support for Display Port PHY found on Samsung EXYNOS SoCs. > + > +config PHY_EXYNOS_MIPI_VIDEO > + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" > + depends on HAS_IOMEM > + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST > + select GENERIC_PHY > + default y if ARCH_S5PV210 || ARCH_EXYNOS > + help > + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P > + and EXYNOS SoCs. > + > +config PHY_EXYNOS5250_SATA > + tristate "Exynos5250 Sata SerDes/PHY driver" > + depends on SOC_EXYNOS5250 > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + select I2C > + select I2C_S3C2410 > + select MFD_SYSCON > + help > + Enable this to support SATA SerDes/Phy found on Samsung's > + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, > + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host > + port to accept one SATA device. > diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile > new file mode 100644 > index 0000000..585dbd7 > --- /dev/null > +++ b/drivers/phy/samsung/Makefile > @@ -0,0 +1,10 @@ > +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o > +phy-exynos-usb2-y += phy-samsung-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o > +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o > diff --git a/drivers/phy/phy-exynos-dp-video.c > b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% > rename from drivers/phy/phy-exynos-dp-video.c > rename to drivers/phy/samsung/phy-exynos-dp-video.c > diff --git a/drivers/phy/phy-exynos-mipi-video.c > b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% > rename from drivers/phy/phy-exynos-mipi-video.c > rename to drivers/phy/samsung/phy-exynos-mipi-video.c > diff --git a/drivers/phy/phy-exynos4210-usb2.c > b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4210-usb2.c > rename to drivers/phy/samsung/phy-exynos4210-usb2.c > diff --git a/drivers/phy/phy-exynos4x12-usb2.c > b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos4x12-usb2.c > rename to drivers/phy/samsung/phy-exynos4x12-usb2.c > diff --git a/drivers/phy/phy-exynos5-usbdrd.c > b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% > rename from drivers/phy/phy-exynos5-usbdrd.c > rename to drivers/phy/samsung/phy-exynos5-usbdrd.c > diff --git a/drivers/phy/phy-exynos5250-sata.c > b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% > rename from drivers/phy/phy-exynos5250-sata.c > rename to drivers/phy/samsung/phy-exynos5250-sata.c > diff --git a/drivers/phy/phy-exynos5250-usb2.c > b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% > rename from drivers/phy/phy-exynos5250-usb2.c > rename to drivers/phy/samsung/phy-exynos5250-usb2.c > diff --git a/drivers/phy/phy-s5pv210-usb2.c > b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% > rename from drivers/phy/phy-s5pv210-usb2.c > rename to drivers/phy/samsung/phy-s5pv210-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.c > b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% > rename from drivers/phy/phy-samsung-usb2.c > rename to drivers/phy/samsung/phy-samsung-usb2.c > diff --git a/drivers/phy/phy-samsung-usb2.h > b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% > rename from drivers/phy/phy-samsung-usb2.h > rename to drivers/phy/samsung/phy-samsung-usb2.h > diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig > new file mode 100644 > index 0000000..651b2bf > --- /dev/null > +++ b/drivers/phy/st/Kconfig > @@ -0,0 +1,51 @@ > +# > +# PHY drivers for ST Micro platforms > +# > +config PHY_MIPHY28LP > + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) > + that is part of STMicroelectronics STiH407 SoC. > + > +config PHY_MIPHY365X > + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" > + depends on ARCH_STI > + depends on HAS_IOMEM > + depends on OF > + select GENERIC_PHY > + help > + Enable this to support the miphy transceiver (for SATA/PCIE) > + that is part of STMicroelectronics STiH41x SoC series. > + > +config PHY_ST_SPEAR1310_MIPHY > + tristate "ST SPEAR1310-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1310 || COMPILE_TEST > + help > + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. > + > +config PHY_ST_SPEAR1340_MIPHY > + tristate "ST SPEAR1340-MIPHY driver" > + select GENERIC_PHY > + depends on MACH_SPEAR1340 || COMPILE_TEST > + help > + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. > + > +config PHY_STIH407_USB > + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" > + depends on RESET_CONTROLLER > + depends on ARCH_STI || COMPILE_TEST > + select GENERIC_PHY > + help > + Enable this support to enable the picoPHY device used by USB2 > + and USB3 controllers on STMicroelectronics STiH407 SoC families. > + > +config PHY_STIH41X_USB > + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" > + depends on ARCH_STI > + select GENERIC_PHY > + help > + Enable this to support the USB transceiver that is part of > + STMicroelectronics STiH41x SoC series. > diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile > new file mode 100644 > index 0000000..907561b > --- /dev/null > +++ b/drivers/phy/st/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o > +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o > +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o > +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o > +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o > +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o > diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c > similarity index 100% > rename from drivers/phy/phy-miphy28lp.c > rename to drivers/phy/st/phy-miphy28lp.c > diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c > similarity index 100% > rename from drivers/phy/phy-miphy365x.c > rename to drivers/phy/st/phy-miphy365x.c > diff --git a/drivers/phy/phy-spear1310-miphy.c > b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1310-miphy.c > rename to drivers/phy/st/phy-spear1310-miphy.c > diff --git a/drivers/phy/phy-spear1340-miphy.c > b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% > rename from drivers/phy/phy-spear1340-miphy.c > rename to drivers/phy/st/phy-spear1340-miphy.c > diff --git a/drivers/phy/phy-stih407-usb.c > b/drivers/phy/st/phy-stih407-usb.c similarity index 100% > rename from drivers/phy/phy-stih407-usb.c > rename to drivers/phy/st/phy-stih407-usb.c > diff --git a/drivers/phy/phy-stih41x-usb.c > b/drivers/phy/st/phy-stih41x-usb.c similarity index 100% > rename from drivers/phy/phy-stih41x-usb.c > rename to drivers/phy/st/phy-stih41x-usb.c > diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig > new file mode 100644 > index 0000000..eb06427 > --- /dev/null > +++ b/drivers/phy/sunxi/Kconfig > @@ -0,0 +1,28 @@ > +# > +# PHY drivers for Allwinner's sunxi platforms > +# > +config PHY_SUN4I_USB > + tristate "Allwinner sunxi SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on EXTCON > + depends on POWER_SUPPLY > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sunxi SoCs. > + > + This driver controls the entire USB PHY block, both the USB OTG > + parts, as well as the 2 regular USB 2 host PHYs. > + > +config PHY_SUN9I_USB > + tristate "Allwinner sun9i SoC USB PHY driver" > + depends on ARCH_SUNXI && HAS_IOMEM && OF > + depends on RESET_CONTROLLER > + depends on USB_COMMON > + select GENERIC_PHY > + help > + Enable this to support the transceiver that is part of Allwinner > + sun9i SoCs. > + > + This driver controls each individual USB 2 host PHY. > diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile > new file mode 100644 > index 0000000..8605529c > --- /dev/null > +++ b/drivers/phy/sunxi/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o > +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o > diff --git a/drivers/phy/phy-sun4i-usb.c > b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100% > rename from drivers/phy/phy-sun4i-usb.c > rename to drivers/phy/sunxi/phy-sun4i-usb.c > diff --git a/drivers/phy/phy-sun9i-usb.c > b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100% > rename from drivers/phy/phy-sun9i-usb.c > rename to drivers/phy/sunxi/phy-sun9i-usb.c > diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig > new file mode 100644 > index 0000000..1e3e307 > --- /dev/null > +++ b/drivers/phy/ti/Kconfig > @@ -0,0 +1,67 @@ > +# > +# PHY drivers for TI platforms > +# > +config PHY_DM816X_USB > + tristate "TI dm816x USB PHY driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this for dm816x USB to work. > + > +config OMAP_CONTROL_PHY > + tristate "OMAP CONTROL PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + help > + Enable this to add support for the PHY part present in the control > + module. This driver has API to power on the USB2 PHY and to write to > + the mailbox. The mailbox is present only in omap4 and the register to > + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an > + additional register to power on USB3 PHY/SATA PHY/PCIE PHY > + (PIPE3 PHY). > + > +config OMAP_USB2 > + tristate "OMAP USB2 PHY Driver" > + depends on ARCH_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the transceiver that is part of SOC. This > + driver takes care of all the PHY functionality apart from comparator. > + The USB OTG controller communicates with the comparator using this > + driver. > + > +config TI_PIPE3 > + tristate "TI PIPE3 PHY Driver" > + depends on ARCH_OMAP2PLUS || COMPILE_TEST > + select GENERIC_PHY > + select OMAP_CONTROL_PHY > + depends on OMAP_OCP2SCP > + help > + Enable this to support the PIPE3 PHY that is part of TI SOCs. This > + driver takes care of all the PHY functionality apart from comparator. > + This driver interacts with the "OMAP Control PHY Driver" to power > + on/off the PHY. > + > +config PHY_TUSB1210 > + tristate "TI TUSB1210 ULPI PHY module" > + depends on USB_ULPI_BUS > + select GENERIC_PHY > + help > + Support for TI TUSB1210 USB ULPI PHY. > + > +config TWL4030_USB > + tristate "TWL4030 USB Transceiver Driver" > + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this to support the USB OTG transceiver on TWL4030 > + family chips (including the TWL5030 and TPS659x0 devices). > + This transceiver supports high and full speed devices plus, > + in host mode, low speed. > diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile > new file mode 100644 > index 0000000..2d16f77 > --- /dev/null > +++ b/drivers/phy/ti/Makefile > @@ -0,0 +1,6 @@ > +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o > +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o > +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o > +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o > +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o > +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o > diff --git a/drivers/phy/phy-dm816x-usb.c > b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% > rename from drivers/phy/phy-dm816x-usb.c > rename to drivers/phy/ti/phy-dm816x-usb.c > diff --git a/drivers/phy/phy-omap-control.c > b/drivers/phy/ti/phy-omap-control.c similarity index 100% > rename from drivers/phy/phy-omap-control.c > rename to drivers/phy/ti/phy-omap-control.c > diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c > similarity index 100% > rename from drivers/phy/phy-omap-usb2.c > rename to drivers/phy/ti/phy-omap-usb2.c > diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c > similarity index 100% > rename from drivers/phy/phy-ti-pipe3.c > rename to drivers/phy/ti/phy-ti-pipe3.c > diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c > similarity index 100% > rename from drivers/phy/phy-tusb1210.c > rename to drivers/phy/ti/phy-tusb1210.c > diff --git a/drivers/phy/phy-twl4030-usb.c > b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% > rename from drivers/phy/phy-twl4030-usb.c > rename to drivers/phy/ti/phy-twl4030-usb.c > diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h > similarity index 100% > rename from drivers/phy/ulpi_phy.h > rename to drivers/phy/ti/ulpi_phy.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Vivek,
[auto build test ERROR on rockchip/for-next]
[also build test ERROR on v4.6-rc1 next-20160401]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
url: https://github.com/0day-ci/linux/commits/Vivek-Gautam/phy-Group-vendor-specific-phy-drivers/20160401-192920
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> make[4]: *** No rule to make target 'drivers/phy/qcom/+=', needed by 'drivers/phy/qcom/built-in.o'.
make[4]: Target '__build' not remade because of errors.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote: > Adding vendor specific directories in phy to group > phy drivers under their respective vendor umbrella. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > --- > > With growing number of phy drivers, it makes sense to > group these drivers under their respective vendor/platform > umbrella directory. > > Build-tested 'multi_v7_defconfig'. Please update also the MAINTAINERS file. For many entires the path won't match anymore. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Krzysztof, On Sat, Apr 2, 2016 at 11:05 PM, Krzysztof Kozlowski <k.kozlowski@samsung.com> wrote: > On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote: >> Adding vendor specific directories in phy to group >> phy drivers under their respective vendor umbrella. >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >> --- >> >> With growing number of phy drivers, it makes sense to >> group these drivers under their respective vendor/platform >> umbrella directory. >> >> Build-tested 'multi_v7_defconfig'. > > Please update also the MAINTAINERS file. For many entires the path won't > match anymore. Thanks for pointing out. I will update the MAINTAINERS file as well. > > Best regards, > Krzysztof > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Apr 1, 2016 at 8:31 AM, kbuild test robot <lkp@intel.com> wrote: > Hi Vivek, > > [auto build test ERROR on rockchip/for-next] > [also build test ERROR on v4.6-rc1 next-20160401] > [if your patch is applied to the wrong git tree, please drop us a note to help improving the system] > > url: https://github.com/0day-ci/linux/commits/Vivek-Gautam/phy-Group-vendor-specific-phy-drivers/20160401-192920 > base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next > config: arm-allyesconfig (attached as .config) > reproduce: > wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross > chmod +x ~/bin/make.cross > # save the attached .config to linux build tree > make.cross ARCH=arm > > All errors (new ones prefixed by >>): > >>> make[4]: *** No rule to make target 'drivers/phy/qcom/+=', needed by 'drivers/phy/qcom/built-in.o'. > make[4]: Target '__build' not remade because of errors. will fix this. > > --- > 0-DAY kernel test infrastructure Open Source Technology Center > https://lists.01.org/pipermail/kbuild-all Intel Corporation
Hi, On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote: > Hi, > > > On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote: >> Hi, >> >> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote: >>> Adding vendor specific directories in phy to group >>> phy drivers under their respective vendor umbrella. >>> >>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >>> --- >>> >>> With growing number of phy drivers, it makes sense to >>> group these drivers under their respective vendor/platform >>> umbrella directory. >>> >>> Build-tested 'multi_v7_defconfig'. >>> >>> drivers/phy/Kconfig | 386 +--------------------- >>> drivers/phy/Makefile | 57 +--- >>> drivers/phy/bcom/Kconfig | 27 ++ >>> drivers/phy/bcom/Makefile | 3 + >>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 >>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 >>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 >>> drivers/phy/hisi/Kconfig | 20 ++ >>> drivers/phy/hisi/Makefile | 2 + >>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 >>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 >>> drivers/phy/marvell/Kconfig | 50 +++ >>> drivers/phy/marvell/Makefile | 6 + >>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 >>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 >>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 >>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 >>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 >>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 >>> drivers/phy/qcom/Kconfig | 23 ++ >>> drivers/phy/qcom/Makefile | 5 + >>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 >>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 >>> drivers/phy/rcar/Kconfig | 16 + >>> drivers/phy/rcar/Makefile | 2 + >>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 >>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 >>> drivers/phy/rockchip/Kconfig | 23 ++ >>> drivers/phy/rockchip/Makefile | 3 + >>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 >>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 >>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 >>> drivers/phy/samsung/Kconfig | 87 +++++ >>> drivers/phy/samsung/Makefile | 10 + >>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 >>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 >>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 >>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 >>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 >>> drivers/phy/st/Kconfig | 51 +++ >>> drivers/phy/st/Makefile | 6 + >>> drivers/phy/{ => st}/phy-miphy28lp.c | 0 >>> drivers/phy/{ => st}/phy-miphy365x.c | 0 >>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 >>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 >>> drivers/phy/{ => st}/phy-stih407-usb.c | 0 >>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0 >>> drivers/phy/sunxi/Kconfig | 28 ++ >>> drivers/phy/sunxi/Makefile | 2 + >>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 >>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 >>> drivers/phy/ti/Kconfig | 67 ++++ >>> drivers/phy/ti/Makefile | 6 + >>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 >>> drivers/phy/{ => ti}/phy-omap-control.c | 0 >>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0 >>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 >>> drivers/phy/{ => ti}/phy-tusb1210.c | 0 >>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 >>> drivers/phy/{ => ti}/ulpi_phy.h | 0 >> >> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI >> driver. > > Yes, you are right. But i was hesitant to add a multi-level header > file include in the phy driver > which uses it. > > Does it makes sense to move this ulpi_phy.h to include/linux/phy ? yeah.. that should be okay. > >>> 71 files changed, 464 insertions(+), 416 deletions(-) >>> create mode 100644 drivers/phy/bcom/Kconfig >>> create mode 100644 drivers/phy/bcom/Makefile >>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) >>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) >>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) >>> create mode 100644 drivers/phy/hisi/Kconfig >>> create mode 100644 drivers/phy/hisi/Makefile >>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) >>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) >>> create mode 100644 drivers/phy/marvell/Kconfig >>> create mode 100644 drivers/phy/marvell/Makefile >>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) >>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) >>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) >>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) >>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) >>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) >>> create mode 100644 drivers/phy/qcom/Kconfig >>> create mode 100644 drivers/phy/qcom/Makefile >>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) >>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) >>> create mode 100644 drivers/phy/rcar/Kconfig >>> create mode 100644 drivers/phy/rcar/Makefile >>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) >>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) >>> create mode 100644 drivers/phy/rockchip/Kconfig >>> create mode 100644 drivers/phy/rockchip/Makefile >>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) >>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) >>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) >>> create mode 100644 drivers/phy/samsung/Kconfig >>> create mode 100644 drivers/phy/samsung/Makefile >>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) >>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) >>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) >>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) >>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) >>> create mode 100644 drivers/phy/st/Kconfig >>> create mode 100644 drivers/phy/st/Makefile >>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) >>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%) >>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) >>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) >>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) >>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) >>> create mode 100644 drivers/phy/sunxi/Kconfig >>> create mode 100644 drivers/phy/sunxi/Makefile >>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) >>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) >>> create mode 100644 drivers/phy/ti/Kconfig >>> create mode 100644 drivers/phy/ti/Makefile >>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) >>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%) >>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) >>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) >>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) >>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) >>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%) >>> >>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>> index 26566db..80c8c68 100644 >>> --- a/drivers/phy/Kconfig >>> +++ b/drivers/phy/Kconfig >>> @@ -15,45 +15,6 @@ config GENERIC_PHY >>> phy users can obtain reference to the PHY. All the users of this >>> framework should select this config. >>> >> >>> +menuconfig PHY_PLAT >>> + bool "Platform Phy drivers" >> >> Not really convinced about adding a new config here. This will create new >> dependencies and will also start breaking users of oldconfig. > > This serves including all the directory paths in the 'make' for > driver/phy/Makefile. > > Otherwise each directory will have to be built as per particular platform > And, not all drivers of a vendor are built for one-kind of platform, > for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210 > Similarly, Broadcom phy drivers are based on multiple platforms, and so > does Marvell's. > > Please suggest a concise way to include the vendor directories in the build path > in drivers/phy/Makefile. obj-y += vendor/? -Kishon > >> >> Also not all of them are platform drivers (e.g ULPI PHY drivers). > I Think this applies to ulpi_phy only at this moment, which we can resolve > by moving that to include/linux path. > >> >> Thanks >> Kishon >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-usb" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kishon, On Wed, Apr 6, 2016 at 5:51 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote: > Hi, > > On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote: >> Hi, >> >> >> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <kishon@ti.com> wrote: >>> Hi, >>> >>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote: >>>> Adding vendor specific directories in phy to group >>>> phy drivers under their respective vendor umbrella. >>>> >>>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >>>> --- >>>> >>>> With growing number of phy drivers, it makes sense to >>>> group these drivers under their respective vendor/platform >>>> umbrella directory. >>>> >>>> Build-tested 'multi_v7_defconfig'. >>>> >>>> drivers/phy/Kconfig | 386 +--------------------- >>>> drivers/phy/Makefile | 57 +--- >>>> drivers/phy/bcom/Kconfig | 27 ++ >>>> drivers/phy/bcom/Makefile | 3 + >>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 >>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 >>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 >>>> drivers/phy/hisi/Kconfig | 20 ++ >>>> drivers/phy/hisi/Makefile | 2 + >>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 >>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 >>>> drivers/phy/marvell/Kconfig | 50 +++ >>>> drivers/phy/marvell/Makefile | 6 + >>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 >>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 >>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 >>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 >>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 >>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 >>>> drivers/phy/qcom/Kconfig | 23 ++ >>>> drivers/phy/qcom/Makefile | 5 + >>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 >>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 >>>> drivers/phy/rcar/Kconfig | 16 + >>>> drivers/phy/rcar/Makefile | 2 + >>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 >>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 >>>> drivers/phy/rockchip/Kconfig | 23 ++ >>>> drivers/phy/rockchip/Makefile | 3 + >>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 >>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 >>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 >>>> drivers/phy/samsung/Kconfig | 87 +++++ >>>> drivers/phy/samsung/Makefile | 10 + >>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 >>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 >>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 >>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 >>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 >>>> drivers/phy/st/Kconfig | 51 +++ >>>> drivers/phy/st/Makefile | 6 + >>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0 >>>> drivers/phy/{ => st}/phy-miphy365x.c | 0 >>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 >>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 >>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0 >>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0 >>>> drivers/phy/sunxi/Kconfig | 28 ++ >>>> drivers/phy/sunxi/Makefile | 2 + >>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 >>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 >>>> drivers/phy/ti/Kconfig | 67 ++++ >>>> drivers/phy/ti/Makefile | 6 + >>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 >>>> drivers/phy/{ => ti}/phy-omap-control.c | 0 >>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0 >>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 >>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0 >>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 >>>> drivers/phy/{ => ti}/ulpi_phy.h | 0 >>> >>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI >>> driver. >> >> Yes, you are right. But i was hesitant to add a multi-level header >> file include in the phy driver >> which uses it. >> >> Does it makes sense to move this ulpi_phy.h to include/linux/phy ? > > yeah.. that should be okay. Alright, i will move this file there then. >> >>>> 71 files changed, 464 insertions(+), 416 deletions(-) >>>> create mode 100644 drivers/phy/bcom/Kconfig >>>> create mode 100644 drivers/phy/bcom/Makefile >>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) >>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) >>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) >>>> create mode 100644 drivers/phy/hisi/Kconfig >>>> create mode 100644 drivers/phy/hisi/Makefile >>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) >>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) >>>> create mode 100644 drivers/phy/marvell/Kconfig >>>> create mode 100644 drivers/phy/marvell/Makefile >>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) >>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) >>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) >>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) >>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) >>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) >>>> create mode 100644 drivers/phy/qcom/Kconfig >>>> create mode 100644 drivers/phy/qcom/Makefile >>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) >>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) >>>> create mode 100644 drivers/phy/rcar/Kconfig >>>> create mode 100644 drivers/phy/rcar/Makefile >>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) >>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) >>>> create mode 100644 drivers/phy/rockchip/Kconfig >>>> create mode 100644 drivers/phy/rockchip/Makefile >>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) >>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) >>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) >>>> create mode 100644 drivers/phy/samsung/Kconfig >>>> create mode 100644 drivers/phy/samsung/Makefile >>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) >>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) >>>> create mode 100644 drivers/phy/st/Kconfig >>>> create mode 100644 drivers/phy/st/Makefile >>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) >>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%) >>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) >>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) >>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) >>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) >>>> create mode 100644 drivers/phy/sunxi/Kconfig >>>> create mode 100644 drivers/phy/sunxi/Makefile >>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) >>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) >>>> create mode 100644 drivers/phy/ti/Kconfig >>>> create mode 100644 drivers/phy/ti/Makefile >>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) >>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%) >>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) >>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) >>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) >>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) >>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%) >>>> >>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig >>>> index 26566db..80c8c68 100644 >>>> --- a/drivers/phy/Kconfig >>>> +++ b/drivers/phy/Kconfig >>>> @@ -15,45 +15,6 @@ config GENERIC_PHY >>>> phy users can obtain reference to the PHY. All the users of this >>>> framework should select this config. >>>> >>> >>>> +menuconfig PHY_PLAT >>>> + bool "Platform Phy drivers" >>> >>> Not really convinced about adding a new config here. This will create new >>> dependencies and will also start breaking users of oldconfig. >> >> This serves including all the directory paths in the 'make' for >> driver/phy/Makefile. >> >> Otherwise each directory will have to be built as per particular platform >> And, not all drivers of a vendor are built for one-kind of platform, >> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210 >> Similarly, Broadcom phy drivers are based on multiple platforms, and so >> does Marvell's. >> >> Please suggest a concise way to include the vendor directories in the build path >> in drivers/phy/Makefile. > > obj-y += vendor/? Yea, correct. Thanks Will respin the patch with all the comments. > > -Kishon > >> >>> >>> Also not all of them are platform drivers (e.g ULPI PHY drivers). >> I Think this applies to ulpi_phy only at this moment, which we can resolve >> by moving that to include/linux path. >> >>> >>> Thanks >>> Kishon >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 26566db..80c8c68 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,45 +15,6 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. -config PHY_BERLIN_USB - tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the USB PHY on Marvell Berlin SoCs. - -config PHY_BERLIN_SATA - tristate "Marvell Berlin SATA PHY driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the SATA PHY on Marvell Berlin SoCs. - -config ARMADA375_USBCLUSTER_PHY - def_bool y - depends on MACH_ARMADA_375 || COMPILE_TEST - depends on OF && HAS_IOMEM - select GENERIC_PHY - -config PHY_DM816X_USB - tristate "TI dm816x USB PHY driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - help - Enable this for dm816x USB to work. - -config PHY_EXYNOS_MIPI_VIDEO - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" - depends on HAS_IOMEM - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST - select GENERIC_PHY - default y if ARCH_S5PV210 || ARCH_EXYNOS - help - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P - and EXYNOS SoCs. - config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG This driver is need for USB0 support on LPC18xx/43xx and takes care of enabling and clock setup. -config PHY_PXA_28NM_HSIC - tristate "Marvell USB HSIC 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB HSIC PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell ehci driver. - - To compile this driver as a module, choose M here. - -config PHY_PXA_28NM_USB2 - tristate "Marvell USB 2.0 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB 2.0 PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell udc/ehci/otg driver. - - To compile this driver as a module, choose M here. - -config PHY_MVEBU_SATA - def_bool y - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD - depends on OF - select GENERIC_PHY - -config PHY_MIPHY28LP - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" - depends on ARCH_STI - select GENERIC_PHY - help - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) - that is part of STMicroelectronics STiH407 SoC. - -config PHY_MIPHY365X - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" - depends on ARCH_STI - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - help - Enable this to support the miphy transceiver (for SATA/PCIE) - that is part of STMicroelectronics STiH41x SoC series. - -config PHY_RCAR_GEN2 - tristate "Renesas R-Car generation 2 USB PHY driver" - depends on ARCH_SHMOBILE - depends on GENERIC_PHY - help - Support for USB PHY found on Renesas R-Car generation 2 SoCs. - -config PHY_RCAR_GEN3_USB2 - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" - depends on OF && ARCH_SHMOBILE - select GENERIC_PHY - help - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. - -config OMAP_CONTROL_PHY - tristate "OMAP CONTROL PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the PHY part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY/SATA PHY/PCIE PHY - (PIPE3 PHY). - -config OMAP_USB2 - tristate "OMAP USB2 PHY Driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the transceiver that is part of SOC. This - driver takes care of all the PHY functionality apart from comparator. - The USB OTG controller communicates with the comparator using this - driver. - -config TI_PIPE3 - tristate "TI PIPE3 PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - select GENERIC_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the PIPE3 PHY that is part of TI SOCs. This - driver takes care of all the PHY functionality apart from comparator. - This driver interacts with the "OMAP Control PHY Driver" to power - on/off the PHY. - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config PHY_EXYNOS_DP_VIDEO - tristate "EXYNOS SoC series Display Port PHY driver" - depends on OF - depends on ARCH_EXYNOS || COMPILE_TEST - default ARCH_EXYNOS - select GENERIC_PHY - help - Support for Display Port PHY found on Samsung EXYNOS SoCs. - -config BCM_KONA_USB2_PHY - tristate "Broadcom Kona USB2 PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support the Broadcom Kona USB 2.0 PHY. - -config PHY_EXYNOS5250_SATA - tristate "Exynos5250 Sata SerDes/PHY driver" - depends on SOC_EXYNOS5250 - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - select I2C - select I2C_S3C2410 - select MFD_SYSCON - help - Enable this to support SATA SerDes/Phy found on Samsung's - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host - port to accept one SATA device. - -config PHY_HIX5HD2_SATA - tristate "HIX5HD2 SATA PHY Driver" - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM - select GENERIC_PHY - select MFD_SYSCON - help - Support for SATA PHY on Hisilicon hix5hd2 Soc. - config PHY_MT65XX_USB3 tristate "Mediatek USB3.0 PHY Driver" depends on ARCH_MEDIATEK && OF @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3 for mt65xx SoCs. it supports two usb2.0 ports and one usb3.0 port. -config PHY_HI6220_USB - tristate "hi6220 USB PHY support" - depends on (ARCH_HISI && ARM64) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the HISILICON HI6220 USB PHY. - - To compile this driver as a module, choose M here. - -config PHY_SUN4I_USB - tristate "Allwinner sunxi SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on EXTCON - depends on POWER_SUPPLY - select GENERIC_PHY - help - Enable this to support the transceiver that is part of Allwinner - sunxi SoCs. - - This driver controls the entire USB PHY block, both the USB OTG - parts, as well as the 2 regular USB 2 host PHYs. - -config PHY_SUN9I_USB - tristate "Allwinner sun9i SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on USB_COMMON - select GENERIC_PHY - help - Enable this to support the transceiver that is part of Allwinner - sun9i SoCs. - - This driver controls each individual USB 2 host PHY. - -config PHY_SAMSUNG_USB2 - tristate "Samsung USB 2.0 PHY driver" - depends on HAS_IOMEM - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 - select GENERIC_PHY - select MFD_SYSCON - default ARCH_EXYNOS - help - Enable this to support the Samsung USB 2.0 PHY driver for Samsung - SoCs. This driver provides the interface for USB 2.0 PHY. Support - for particular PHYs will be enabled based on the SoC type in addition - to this driver. - -config PHY_S5PV210_USB2 - bool "Support for S5PV210" - depends on PHY_SAMSUNG_USB2 - depends on ARCH_S5PV210 - help - Enable USB PHY support for S5PV210. This option requires that Samsung - USB 2.0 PHY driver is enabled and means that support for this - particular SoC is compiled in the driver. In case of S5PV210 two phys - are available - device and host. - -config PHY_EXYNOS4210_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default CPU_EXYNOS4210 - -config PHY_EXYNOS4X12_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 - -config PHY_EXYNOS5250_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS5250 || SOC_EXYNOS5420 - -config PHY_EXYNOS5_USBDRD - tristate "Exynos5 SoC series USB DRD PHY driver" - depends on ARCH_EXYNOS && OF - depends on HAS_IOMEM - depends on USB_DWC3_EXYNOS - select GENERIC_PHY - select MFD_SYSCON - default y - help - Enable USB DRD PHY support for Exynos 5 SoC series. - This driver provides PHY interface for USB 3.0 DRD controller - present on Exynos5 SoC series. - config PHY_PISTACHIO_USB tristate "IMG Pistachio USB2.0 PHY driver" depends on MACH_PISTACHIO @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB help Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. -config PHY_QCOM_APQ8064_SATA - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_ROCKCHIP_USB - tristate "Rockchip USB2 PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip USB 2.0 PHY. - -config PHY_ROCKCHIP_EMMC - tristate "Rockchip EMMC PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip EMMC PHY. - -config PHY_ROCKCHIP_DP - tristate "Rockchip Display Port PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip Display Port PHY. - -config PHY_ST_SPEAR1310_MIPHY - tristate "ST SPEAR1310-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1310 || COMPILE_TEST - help - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. - -config PHY_ST_SPEAR1340_MIPHY - tristate "ST SPEAR1340-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1340 || COMPILE_TEST - help - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. - config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) @@ -372,53 +49,20 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. -config PHY_STIH407_USB - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" - depends on RESET_CONTROLLER - depends on ARCH_STI || COMPILE_TEST - select GENERIC_PHY - help - Enable this support to enable the picoPHY device used by USB2 - and USB3 controllers on STMicroelectronics STiH407 SoC families. - -config PHY_STIH41X_USB - tristate "STMicroelectronics USB2 PHY driver for STiH41x series" - depends on ARCH_STI - select GENERIC_PHY - help - Enable this to support the USB transceiver that is part of - STMicroelectronics STiH41x SoC series. - -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM - select GENERIC_PHY - help - Support for UFS PHY on QCOM chipsets. - -config PHY_TUSB1210 - tristate "TI TUSB1210 ULPI PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for TI TUSB1210 USB ULPI PHY. - -config PHY_BRCMSTB_SATA - tristate "Broadcom STB SATA PHY driver" - depends on ARCH_BRCMSTB || BMIPS_GENERIC - depends on OF - select GENERIC_PHY - help - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled. - -config PHY_CYGNUS_PCIE - tristate "Broadcom Cygnus PCIe PHY driver" - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) - select GENERIC_PHY - default ARCH_BCM_CYGNUS - help - Enable this to support the Broadcom Cygnus PCIe PHY. - If unsure, say N. +menuconfig PHY_PLAT + bool "Platform Phy drivers" + +if PHY_PLAT +source "drivers/phy/bcom/Kconfig" +source "drivers/phy/hisi/Kconfig" +source "drivers/phy/marvell/Kconfig" +source "drivers/phy/qcom/Kconfig" +source "drivers/phy/rcar/Kconfig" +source "drivers/phy/rockchip/Kconfig" +source "drivers/phy/samsung/Kconfig" +source "drivers/phy/st/Kconfig" +source "drivers/phy/sunxi/Kconfig" +source "drivers/phy/ti/Kconfig" +endif endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 24596a9..73d563b 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,52 +3,19 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o -phy-exynos-usb2-y += phy-samsung-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o + +# Phy drivers for different platforms. +obj-$(CONFIG_PHY_PLAT) += bcom/ \ + hisi/ \ + marvell/ \ + qcom/ \ + rcar/ \ + rockchip/ \ + samsung/ \ + st/ \ + sunxi/ \ + ti/ diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig new file mode 100644 index 0000000..8243372 --- /dev/null +++ b/drivers/phy/bcom/Kconfig @@ -0,0 +1,27 @@ +# +# PHY drivers for Broadcom platforms +# +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + +config BCM_KONA_USB2_PHY + tristate "Broadcom Kona USB2 PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + +config PHY_BRCMSTB_SATA + tristate "Broadcom STB SATA PHY driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + depends on OF + select GENERIC_PHY + help + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled. diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile new file mode 100644 index 0000000..f30fa76 --- /dev/null +++ b/drivers/phy/bcom/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100% rename from drivers/phy/phy-bcm-cygnus-pcie.c rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100% rename from drivers/phy/phy-bcm-kona-usb2.c rename to drivers/phy/bcom/phy-bcm-kona-usb2.c diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100% rename from drivers/phy/phy-brcmstb-sata.c rename to drivers/phy/bcom/phy-brcmstb-sata.c diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig new file mode 100644 index 0000000..affa9ed --- /dev/null +++ b/drivers/phy/hisi/Kconfig @@ -0,0 +1,20 @@ +# +# PHY drivers for HiSilicon platforms +# +config PHY_HIX5HD2_SATA + tristate "HIX5HD2 SATA PHY Driver" + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM + select GENERIC_PHY + select MFD_SYSCON + help + Support for SATA PHY on Hisilicon hix5hd2 Soc. + +config PHY_HI6220_USB + tristate "hi6220 USB PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI6220 USB PHY. + + To compile this driver as a module, choose M here. diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile new file mode 100644 index 0000000..6059ed8 --- /dev/null +++ b/drivers/phy/hisi/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100% rename from drivers/phy/phy-hi6220-usb.c rename to drivers/phy/hisi/phy-hi6220-usb.c diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100% rename from drivers/phy/phy-hix5hd2-sata.c rename to drivers/phy/hisi/phy-hix5hd2-sata.c diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig new file mode 100644 index 0000000..6c1576c --- /dev/null +++ b/drivers/phy/marvell/Kconfig @@ -0,0 +1,50 @@ +# +# PHY drivers for Marvell platforms +# +config ARMADA375_USBCLUSTER_PHY + def_bool y + depends on MACH_ARMADA_375 || COMPILE_TEST + depends on OF && HAS_IOMEM + select GENERIC_PHY + +config PHY_BERLIN_USB + tristate "Marvell Berlin USB PHY Driver" + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the USB PHY on Marvell Berlin SoCs. + +config PHY_BERLIN_SATA + tristate "Marvell Berlin SATA PHY driver" + depends on ARCH_BERLIN && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the SATA PHY on Marvell Berlin SoCs. + +config PHY_MVEBU_SATA + def_bool y + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD + depends on OF + select GENERIC_PHY + +config PHY_PXA_28NM_HSIC + tristate "Marvell USB HSIC 28nm PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support Marvell USB HSIC PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell ehci driver. + + To compile this driver as a module, choose M here. + +config PHY_PXA_28NM_USB2 + tristate "Marvell USB 2.0 28nm PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support Marvell USB 2.0 PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell udc/ehci/otg driver. + + To compile this driver as a module, choose M here. diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile new file mode 100644 index 0000000..f4fa255 --- /dev/null +++ b/drivers/phy/marvell/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% rename from drivers/phy/phy-armada375-usb2.c rename to drivers/phy/marvell/phy-armada375-usb2.c diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% rename from drivers/phy/phy-berlin-sata.c rename to drivers/phy/marvell/phy-berlin-sata.c diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% rename from drivers/phy/phy-berlin-usb.c rename to drivers/phy/marvell/phy-berlin-usb.c diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% rename from drivers/phy/phy-mvebu-sata.c rename to drivers/phy/marvell/phy-mvebu-sata.c diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% rename from drivers/phy/phy-pxa-28nm-hsic.c rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% rename from drivers/phy/phy-pxa-28nm-usb2.c rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig new file mode 100644 index 0000000..9718d01 --- /dev/null +++ b/drivers/phy/qcom/Kconfig @@ -0,0 +1,23 @@ +# +# PHY drivers for Qualcomm platforms +# +config PHY_QCOM_APQ8064_SATA + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_UFS + tristate "Qualcomm UFS PHY driver" + depends on OF && ARCH_QCOM + select GENERIC_PHY + help + Support for UFS PHY on QCOM chipsets. diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile new file mode 100644 index 0000000..2db3e77 --- /dev/null +++ b/drivers/phy/qcom/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \ + += phy-qcom-ufs-qmp-20nm.o \ + += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100% rename from drivers/phy/phy-qcom-apq8064-sata.c rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100% rename from drivers/phy/phy-qcom-ipq806x-sata.c rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-i.h rename to drivers/phy/qcom/phy-qcom-ufs-i.h diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c similarity index 100% rename from drivers/phy/phy-qcom-ufs.c rename to drivers/phy/qcom/phy-qcom-ufs.c diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig new file mode 100644 index 0000000..169b5e2 --- /dev/null +++ b/drivers/phy/rcar/Kconfig @@ -0,0 +1,16 @@ +# +# PHY drivers for Renesas's r-car platforms +# +config PHY_RCAR_GEN2 + tristate "Renesas R-Car generation 2 USB PHY driver" + depends on ARCH_SHMOBILE + depends on GENERIC_PHY + help + Support for USB PHY found on Renesas R-Car generation 2 SoCs. + +config PHY_RCAR_GEN3_USB2 + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" + depends on OF && ARCH_SHMOBILE + select GENERIC_PHY + help + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile new file mode 100644 index 0000000..695241a --- /dev/null +++ b/drivers/phy/rcar/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100% rename from drivers/phy/phy-rcar-gen2.c rename to drivers/phy/rcar/phy-rcar-gen2.c diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100% rename from drivers/phy/phy-rcar-gen3-usb2.c rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig new file mode 100644 index 0000000..c575d1e --- /dev/null +++ b/drivers/phy/rockchip/Kconfig @@ -0,0 +1,23 @@ +# +# PHY drivers for Rockchip platforms +# +config PHY_ROCKCHIP_USB + tristate "Rockchip USB2 PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB 2.0 PHY. + +config PHY_ROCKCHIP_EMMC + tristate "Rockchip EMMC PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip EMMC PHY. + +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile new file mode 100644 index 0000000..c15acc1 --- /dev/null +++ b/drivers/phy/rockchip/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% rename from drivers/phy/phy-rockchip-dp.c rename to drivers/phy/rockchip/phy-rockchip-dp.c diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% rename from drivers/phy/phy-rockchip-emmc.c rename to drivers/phy/rockchip/phy-rockchip-emmc.c diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% rename from drivers/phy/phy-rockchip-usb.c rename to drivers/phy/rockchip/phy-rockchip-usb.c diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig new file mode 100644 index 0000000..80bdea7 --- /dev/null +++ b/drivers/phy/samsung/Kconfig @@ -0,0 +1,87 @@ +# +# PHY drivers for Samsung platforms +# +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + depends on HAS_IOMEM + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support + for particular PHYs will be enabled based on the SoC type in addition + to this driver. + +config PHY_S5PV210_USB2 + bool "Support for S5PV210" + depends on PHY_SAMSUNG_USB2 + depends on ARCH_S5PV210 + help + Enable USB PHY support for S5PV210. This option requires that Samsung + USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of S5PV210 two phys + are available - device and host. + +config PHY_EXYNOS4210_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default CPU_EXYNOS4210 + +config PHY_EXYNOS4X12_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + +config PHY_EXYNOS5250_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5250 || SOC_EXYNOS5420 + +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on ARCH_EXYNOS && OF + depends on HAS_IOMEM + depends on USB_DWC3_EXYNOS + select GENERIC_PHY + select MFD_SYSCON + default y + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. + +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series Display Port PHY driver" + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung EXYNOS SoCs. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and EXYNOS SoCs. + +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile new file mode 100644 index 0000000..585dbd7 --- /dev/null +++ b/drivers/phy/samsung/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% rename from drivers/phy/phy-exynos-dp-video.c rename to drivers/phy/samsung/phy-exynos-dp-video.c diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% rename from drivers/phy/phy-exynos-mipi-video.c rename to drivers/phy/samsung/phy-exynos-mipi-video.c diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% rename from drivers/phy/phy-exynos4210-usb2.c rename to drivers/phy/samsung/phy-exynos4210-usb2.c diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% rename from drivers/phy/phy-exynos4x12-usb2.c rename to drivers/phy/samsung/phy-exynos4x12-usb2.c diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% rename from drivers/phy/phy-exynos5-usbdrd.c rename to drivers/phy/samsung/phy-exynos5-usbdrd.c diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% rename from drivers/phy/phy-exynos5250-sata.c rename to drivers/phy/samsung/phy-exynos5250-sata.c diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% rename from drivers/phy/phy-exynos5250-usb2.c rename to drivers/phy/samsung/phy-exynos5250-usb2.c diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% rename from drivers/phy/phy-s5pv210-usb2.c rename to drivers/phy/samsung/phy-s5pv210-usb2.c diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% rename from drivers/phy/phy-samsung-usb2.c rename to drivers/phy/samsung/phy-samsung-usb2.c diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% rename from drivers/phy/phy-samsung-usb2.h rename to drivers/phy/samsung/phy-samsung-usb2.h diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig new file mode 100644 index 0000000..651b2bf --- /dev/null +++ b/drivers/phy/st/Kconfig @@ -0,0 +1,51 @@ +# +# PHY drivers for ST Micro platforms +# +config PHY_MIPHY28LP + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) + that is part of STMicroelectronics STiH407 SoC. + +config PHY_MIPHY365X + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" + depends on ARCH_STI + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE) + that is part of STMicroelectronics STiH41x SoC series. + +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STIH41X_USB + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the USB transceiver that is part of + STMicroelectronics STiH41x SoC series. diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile new file mode 100644 index 0000000..907561b --- /dev/null +++ b/drivers/phy/st/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c similarity index 100% rename from drivers/phy/phy-miphy28lp.c rename to drivers/phy/st/phy-miphy28lp.c diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c similarity index 100% rename from drivers/phy/phy-miphy365x.c rename to drivers/phy/st/phy-miphy365x.c diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% rename from drivers/phy/phy-spear1310-miphy.c rename to drivers/phy/st/phy-spear1310-miphy.c diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% rename from drivers/phy/phy-spear1340-miphy.c rename to drivers/phy/st/phy-spear1340-miphy.c diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c similarity index 100% rename from drivers/phy/phy-stih407-usb.c rename to drivers/phy/st/phy-stih407-usb.c diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/st/phy-stih41x-usb.c similarity index 100% rename from drivers/phy/phy-stih41x-usb.c rename to drivers/phy/st/phy-stih41x-usb.c diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig new file mode 100644 index 0000000..eb06427 --- /dev/null +++ b/drivers/phy/sunxi/Kconfig @@ -0,0 +1,28 @@ +# +# PHY drivers for Allwinner's sunxi platforms +# +config PHY_SUN4I_USB + tristate "Allwinner sunxi SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + depends on EXTCON + depends on POWER_SUPPLY + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sunxi SoCs. + + This driver controls the entire USB PHY block, both the USB OTG + parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SUN9I_USB + tristate "Allwinner sun9i SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + depends on USB_COMMON + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sun9i SoCs. + + This driver controls each individual USB 2 host PHY. diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile new file mode 100644 index 0000000..8605529c --- /dev/null +++ b/drivers/phy/sunxi/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100% rename from drivers/phy/phy-sun4i-usb.c rename to drivers/phy/sunxi/phy-sun4i-usb.c diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100% rename from drivers/phy/phy-sun9i-usb.c rename to drivers/phy/sunxi/phy-sun9i-usb.c diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig new file mode 100644 index 0000000..1e3e307 --- /dev/null +++ b/drivers/phy/ti/Kconfig @@ -0,0 +1,67 @@ +# +# PHY drivers for TI platforms +# +config PHY_DM816X_USB + tristate "TI dm816x USB PHY driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this for dm816x USB to work. + +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + +config PHY_TUSB1210 + tristate "TI TUSB1210 ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for TI TUSB1210 USB ULPI PHY. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile new file mode 100644 index 0000000..2d16f77 --- /dev/null +++ b/drivers/phy/ti/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> --- With growing number of phy drivers, it makes sense to group these drivers under their respective vendor/platform umbrella directory. Build-tested 'multi_v7_defconfig'. drivers/phy/Kconfig | 386 +--------------------- drivers/phy/Makefile | 57 +--- drivers/phy/bcom/Kconfig | 27 ++ drivers/phy/bcom/Makefile | 3 + drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0 drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0 drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0 drivers/phy/hisi/Kconfig | 20 ++ drivers/phy/hisi/Makefile | 2 + drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0 drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0 drivers/phy/marvell/Kconfig | 50 +++ drivers/phy/marvell/Makefile | 6 + drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 drivers/phy/qcom/Kconfig | 23 ++ drivers/phy/qcom/Makefile | 5 + drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0 drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0 drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0 drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0 drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0 drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0 drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0 drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0 drivers/phy/rcar/Kconfig | 16 + drivers/phy/rcar/Makefile | 2 + drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0 drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0 drivers/phy/rockchip/Kconfig | 23 ++ drivers/phy/rockchip/Makefile | 3 + drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 drivers/phy/samsung/Kconfig | 87 +++++ drivers/phy/samsung/Makefile | 10 + drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 drivers/phy/st/Kconfig | 51 +++ drivers/phy/st/Makefile | 6 + drivers/phy/{ => st}/phy-miphy28lp.c | 0 drivers/phy/{ => st}/phy-miphy365x.c | 0 drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 drivers/phy/{ => st}/phy-stih407-usb.c | 0 drivers/phy/{ => st}/phy-stih41x-usb.c | 0 drivers/phy/sunxi/Kconfig | 28 ++ drivers/phy/sunxi/Makefile | 2 + drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0 drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0 drivers/phy/ti/Kconfig | 67 ++++ drivers/phy/ti/Makefile | 6 + drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 drivers/phy/{ => ti}/phy-omap-control.c | 0 drivers/phy/{ => ti}/phy-omap-usb2.c | 0 drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 drivers/phy/{ => ti}/phy-tusb1210.c | 0 drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 drivers/phy/{ => ti}/ulpi_phy.h | 0 71 files changed, 464 insertions(+), 416 deletions(-) create mode 100644 drivers/phy/bcom/Kconfig create mode 100644 drivers/phy/bcom/Makefile rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%) rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%) rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%) create mode 100644 drivers/phy/hisi/Kconfig create mode 100644 drivers/phy/hisi/Makefile rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%) rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%) create mode 100644 drivers/phy/marvell/Kconfig create mode 100644 drivers/phy/marvell/Makefile rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) create mode 100644 drivers/phy/qcom/Kconfig create mode 100644 drivers/phy/qcom/Makefile rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%) rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%) rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%) create mode 100644 drivers/phy/rcar/Kconfig create mode 100644 drivers/phy/rcar/Makefile rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%) rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%) create mode 100644 drivers/phy/rockchip/Kconfig create mode 100644 drivers/phy/rockchip/Makefile rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) create mode 100644 drivers/phy/samsung/Kconfig create mode 100644 drivers/phy/samsung/Makefile rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) create mode 100644 drivers/phy/st/Kconfig create mode 100644 drivers/phy/st/Makefile rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) rename drivers/phy/{ => st}/phy-miphy365x.c (100%) rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%) create mode 100644 drivers/phy/sunxi/Kconfig create mode 100644 drivers/phy/sunxi/Makefile rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%) rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%) create mode 100644 drivers/phy/ti/Kconfig create mode 100644 drivers/phy/ti/Makefile rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) rename drivers/phy/{ => ti}/phy-omap-control.c (100%) rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) rename drivers/phy/{ => ti}/ulpi_phy.h (100%) diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% rename from drivers/phy/phy-dm816x-usb.c rename to drivers/phy/ti/phy-dm816x-usb.c diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c similarity index 100% rename from drivers/phy/phy-omap-control.c rename to drivers/phy/ti/phy-omap-control.c diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c similarity index 100% rename from drivers/phy/phy-omap-usb2.c rename to drivers/phy/ti/phy-omap-usb2.c diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c similarity index 100% rename from drivers/phy/phy-ti-pipe3.c rename to drivers/phy/ti/phy-ti-pipe3.c diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c similarity index 100% rename from drivers/phy/phy-tusb1210.c rename to drivers/phy/ti/phy-tusb1210.c diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% rename from drivers/phy/phy-twl4030-usb.c rename to drivers/phy/ti/phy-twl4030-usb.c diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h similarity index 100% rename from drivers/phy/ulpi_phy.h rename to drivers/phy/ti/ulpi_phy.h