| Message ID | 1460405422-8654-3-git-send-email-saeedm@mellanox.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On Mon, Apr 11, 2016 at 11:10 PM, Saeed Mahameed <saeedm@mellanox.com> wrote: > Adding the needed mlx5_ifc hardware bits and structs > for the following feature: feature --> features > * Add vport to steering commands for SRIOV ACL support > * Add mlcr, pcmr and mcia registers for dump module EEPROM > * Add support for FCS, baeacon led and disable_link bits to > hca caps > * Add CQE period mode bit in CQ context for CQE based CQ > moderation support > * Add umr SQ bit for fragmented memory registration > * Add needed bits and caps for Striding RQ support AFAIK, all the above are features will go through net-next, what made you anticipate conflicts with linux-rdma? -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 12:17 AM, Or Gerlitz <gerlitz.or@gmail.com> wrote: > > feature --> features Correct, will fix. > >> * Add vport to steering commands for SRIOV ACL support >> * Add mlcr, pcmr and mcia registers for dump module EEPROM >> * Add support for FCS, baeacon led and disable_link bits to >> hca caps >> * Add CQE period mode bit in CQ context for CQE based CQ >> moderation support >> * Add umr SQ bit for fragmented memory registration >> * Add needed bits and caps for Striding RQ support > > AFAIK, all the above are features will go through net-next, what made > you anticipate conflicts with linux-rdma? FCS bit is needed also for rdma, so we took the liberty of updating all the needed HW structs, bits, caps, etc .. at once for all mlx5 features planned for 4.7 regardless of rdma/net conflicts. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 12:24 AM, Saeed Mahameed <saeedm@dev.mellanox.co.il> wrote: > On Tue, Apr 12, 2016 at 12:17 AM, Or Gerlitz <gerlitz.or@gmail.com> wrote: >> feature --> features > Correct, will fix. >>> * Add vport to steering commands for SRIOV ACL support >>> * Add mlcr, pcmr and mcia registers for dump module EEPROM >>> * Add support for FCS, baeacon led and disable_link bits to hca caps >>> * Add CQE period mode bit in CQ context for CQE based CQ >>> moderation support >>> * Add umr SQ bit for fragmented memory registration >>> * Add needed bits and caps for Striding RQ support >> AFAIK, all the above are features will go through net-next, what made >> you anticipate conflicts with linux-rdma? > FCS bit is needed also for rdma, so we took the liberty of updating > all the needed HW structs, bits, caps, etc .. > at once for all mlx5 features planned for 4.7 regardless of rdma/net conflicts. The cover letter states that this series deals with shared code. I guess you might also could extend it a bit to deal also with code that you suspect could lead to conflicts, but I don't see why it evolved to that extent. Or. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 12:37:34AM +0300, Or Gerlitz wrote: > On Tue, Apr 12, 2016 at 12:24 AM, Saeed Mahameed > <saeedm@dev.mellanox.co.il> wrote: > > On Tue, Apr 12, 2016 at 12:17 AM, Or Gerlitz <gerlitz.or@gmail.com> wrote: > > >> feature --> features > > > Correct, will fix. > > >>> * Add vport to steering commands for SRIOV ACL support > >>> * Add mlcr, pcmr and mcia registers for dump module EEPROM > >>> * Add support for FCS, baeacon led and disable_link bits to hca caps > >>> * Add CQE period mode bit in CQ context for CQE based CQ > >>> moderation support > >>> * Add umr SQ bit for fragmented memory registration > >>> * Add needed bits and caps for Striding RQ support > > >> AFAIK, all the above are features will go through net-next, what made > >> you anticipate conflicts with linux-rdma? > > > FCS bit is needed also for rdma, so we took the liberty of updating > > all the needed HW structs, bits, caps, etc .. > > at once for all mlx5 features planned for 4.7 regardless of rdma/net conflicts. > > The cover letter states that this series deals with shared code. > > I guess you might also could extend it a bit to deal also with code > that you suspect could lead to conflicts, but I don't see why it > evolved to that extent. Or, All these micro-optimizations on this shared file can potentially lead to undesired merge conflicts. Subsystem maintainers and Linus don't need to deal with these conflicts at all. It won't help to anyone to split this commit to more than one patch.
On Tue, Apr 12, 2016 at 8:15 AM, Leon Romanovsky <leon@leon.nu> wrote: > On Tue, Apr 12, 2016 at 12:37:34AM +0300, Or Gerlitz wrote: >> On Tue, Apr 12, 2016 at 12:24 AM, Saeed Mahameed >> <saeedm@dev.mellanox.co.il> wrote: >> > On Tue, Apr 12, 2016 at 12:17 AM, Or Gerlitz <gerlitz.or@gmail.com> wrote: >> >> >> feature --> features >> >> > Correct, will fix. >> >> >>> * Add vport to steering commands for SRIOV ACL support >> >>> * Add mlcr, pcmr and mcia registers for dump module EEPROM >> >>> * Add support for FCS, baeacon led and disable_link bits to hca caps >> >>> * Add CQE period mode bit in CQ context for CQE based CQ >> >>> moderation support >> >>> * Add umr SQ bit for fragmented memory registration >> >>> * Add needed bits and caps for Striding RQ support >> >> >> AFAIK, all the above are features will go through net-next, what made >> >> you anticipate conflicts with linux-rdma? >> >> > FCS bit is needed also for rdma, so we took the liberty of updating >> > all the needed HW structs, bits, caps, etc .. >> > at once for all mlx5 features planned for 4.7 regardless of rdma/net conflicts. >> >> The cover letter states that this series deals with shared code. >> >> I guess you might also could extend it a bit to deal also with code >> that you suspect could lead to conflicts, but I don't see why it >> evolved to that extent. > > Or, > All these micro-optimizations on this shared file can potentially lead > to undesired merge conflicts. Subsystem maintainers and Linus don't need to > deal with these conflicts at all. Leon, Conflicts happens @ all times, life. We (MLNX) didn't do a good job to minimize them as much as possible on the 4.5 cycle (understatement) and did vast improvement in the 4.6 cycle (one or two conflicts AFAIK and communicated to Linus). It's correct that Linus got really angry on these two conflicts but I have communicated to him the fact that we did that improvement and we're talking on two commits for a fairly large volume of patches, the response was, if you do things right, we will happily keep working with you, people, go look. I understand your desire to get it down to zero, but it's not gonna work, pick another target. For example, the networking community has a fairly large rc activity (I would say 10-20x vs rdma), so when Dave does his "merge-rebases" for net-next over net and linus tree (4-5 times in a release), he has to this way or another solve conflicts, yes! ditto for Linus during merge windows and to some extent in rc times too. > It won't help to anyone to split this commit to more than one patch. The commit change-log should make it clear what this is about, and it doesn't. If you believe in something, state that clear, be precise. As Saeed admitted the shared code in the commit spans maybe 2% of it. The 1st commit deals with a field which is not used in the driver, this is a cleanup that you can do in rc (net) patch (remove the field all together) and overall, w.o seeing the down-stream patches that depend on the newly introduced fields, how do you know there aren't such (unused) bits in the 2nd commit? Or. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 08:36:21AM +0300, Or Gerlitz wrote: > Conflicts happens @ all times, life. > ... > > I understand your desire to get it down to zero, but it's not gonna > work, pick another target. Maybe you are right and the time will show, but now we (Saeed, Matan and me) are trying hard to achieve this goal. > > For example, the networking community has a fairly large rc activity > (I would say 10-20x > vs rdma), so when Dave does his "merge-rebases" for net-next over net > and linus tree > (4-5 times in a release), he has to this way or another solve > conflicts, yes! ditto for > Linus during merge windows and to some extent in rc times too. I don't see any harm in our desire to decrease work overhead from these busy people. > > > It won't help to anyone to split this commit to more than one patch. > > The commit change-log should make it clear what this is about, and it doesn't. > If you believe in something, state that clear, be precise. I agree. > > As Saeed admitted the shared code in the commit spans maybe 2% of it. > > The 1st commit deals with a field which is not used in the driver, > this is a cleanup > that you can do in rc (net) patch (remove the field all together) and > overall, w.o seeing I don't agree with your point that cleanup should go to RC. > the down-stream patches that depend on the newly introduced fields, > how do you know there aren't such (unused) bits in the 2nd commit? No, I don't know in advance, but the truth is that it doesn't bother anyone, because we are exposing our internal HW to kernel clients and doing it with minimal impact on the maintainers.
On Tue, Apr 12, 2016 at 9:01 AM, Leon Romanovsky <leon@leon.nu> wrote: > On Tue, Apr 12, 2016 at 08:36:21AM +0300, Or Gerlitz wrote: >> >> I understand your desire to get it down to zero, but it's not gonna >> work, pick another target. > > Maybe you are right and the time will show, but now we (Saeed, Matan and me) > are trying hard to achieve this goal. > >> >> For example, the networking community has a fairly large rc activity >> (I would say 10-20x >> vs rdma), so when Dave does his "merge-rebases" for net-next over net >> and linus tree >> (4-5 times in a release), he has to this way or another solve >> conflicts, yes! ditto for >> Linus during merge windows and to some extent in rc times too. > > I don't see any harm in our desire to decrease work overhead from these > busy people. > >> >> > It won't help to anyone to split this commit to more than one patch. >> >> The commit change-log should make it clear what this is about, and it doesn't. >> If you believe in something, state that clear, be precise. > > I agree. > >> >> As Saeed admitted the shared code in the commit spans maybe 2% of it. >> >> The 1st commit deals with a field which is not used in the driver, >> this is a cleanup >> that you can do in rc (net) patch (remove the field all together) and >> overall, w.o seeing Or, I guess everybody here agrees that mlx5_ifc is our Connectx-4 pure HW spec, written in C, isn't that cool ? I see no harm updating our HW spec once in a kernel cycle revealing new cool HW bits and interfaces for anyone to use mlx5e/mlx5_core/mlx5_ib .. you name it. Why would you break down this patch to many when no matter what you do, at the end it would look the same ? As Leon mentioned we MLNX maintainers prefer to update this file at once when possible. > > I don't agree with your point that cleanup should go to RC. I am with Leon on this one, the cleanup code is just cleanup for new features to come, it has nothing to do with RC (net). > >> the down-stream patches that depend on the newly introduced fields, >> how do you know there aren't such (unused) bits in the 2nd commit? > > No, I don't know in advance, but the truth is that it doesn't bother > anyone, because we are exposing our internal HW to kernel clients and > doing it with minimal impact on the maintainers. Yep, this is exactly what i am trying to say, there are no two ways to describe/write (mlx5_ifc) code, if it is a HW spec, why shouldn't it appear from day one ? -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 9:01 AM, Leon Romanovsky <leon@leon.nu> wrote: > On Tue, Apr 12, 2016 at 08:36:21AM +0300, Or Gerlitz wrote: >> Conflicts happens @ all times, life. >> I understand your desire to get it down to zero, but it's not gonna >> work, pick another target. > Maybe you are right and the time will show, but now we (Saeed, Matan and me) > are trying hard to achieve this goal. going with your approach, next you are going to define a goal of no RC time conflicts between rdma and net, and this will slow down the already terribly slow (no 4.6 net mlx5 rc patches so far) process even further. >> For example, the networking community has a fairly large rc activity >> (I would say 10-20x >> vs rdma), so when Dave does his "merge-rebases" for net-next over net >> and linus tree >> (4-5 times in a release), he has to this way or another solve >> conflicts, yes! ditto for >> Linus during merge windows and to some extent in rc times too. > I don't see any harm in our desire to decrease work overhead from these > busy people. Desire is one thing, you took it too further to my taste. >> > It won't help to anyone to split this commit to more than one patch. >> The commit change-log should make it clear what this is about, and it doesn't. >> If you believe in something, state that clear, be precise. > I agree. good, so please do that in the respin >> As Saeed admitted the shared code in the commit spans maybe 2% of it. >> The 1st commit deals with a field which is not used in the driver, >> this is a cleanup >> that you can do in rc (net) patch (remove the field all together) and >> overall, w.o seeing > I don't agree with your point that cleanup should go to RC. >> the down-stream patches that depend on the newly introduced fields, >> how do you know there aren't such (unused) bits in the 2nd commit? > No, I don't know in advance, but the truth is that it doesn't bother > anyone, because we are exposing our internal HW to kernel clients and > doing it with minimal impact on the maintainers. this is not the internal HW, it's the FW API and the FW API is stabilized together with implementing the feature in the driver. We must not expose unused fields since they might change/move or be eliminated as part of the driver implementation and this creates extra noise and burden for other developers and maintainers. The 1st patch should change to be elimination of these two fields (cqe_zip_xxx and early VF enable) b/c they are not used in the code. Or. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Apr 12, 2016 at 10:40 AM, Saeed Mahameed <saeedm@dev.mellanox.co.il> wrote: > Why would you break down this patch to many when no matter what you > do, at the end it would look the same ? > As Leon mentioned we MLNX maintainers prefer to update this file at > once when possible. See my response to Leon. It happened to me many times in code review that people gave me patches that open X fields in the IFC file and their code used Y << X fields. I don't want the IFC file to have even one unused field, and I think the correct way to do that is have both the IFC file and the driver changes in the same series. I understand the trend to have zero-conflicts, lets try that. Did you make sure all exposed IFC fields are used? Or. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
We talked here, and the three MLNX mlx5 maintainers prefer things to be such they submit a patch to both trees (rdma and net-next) that contains the changes they plan to the FW IFC file for that -next release. They agreed that only fields that will be actually in use by the driver will be exposed in the IFC. So... let it be and good luck to us, maybe with even zero -next conflicts on mlx5 between to two subsystems, happy upstreaming. Or. -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index c300e74..4ce4ea4 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -513,7 +513,9 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits { u8 max_lso_cap[0x5]; u8 reserved_at_10[0x4]; u8 rss_ind_tbl_cap[0x4]; - u8 reserved_at_18[0x3]; + u8 reg_umr_sq[0x1]; + u8 scatter_fcs[0x1]; + u8 reserved_at_1a[0x1]; u8 tunnel_lso_const_out_ip_id[0x1]; u8 reserved_at_1c[0x2]; u8 tunnel_statless_gre[0x1]; @@ -648,7 +650,7 @@ struct mlx5_ifc_vector_calc_cap_bits { enum { MLX5_WQ_TYPE_LINKED_LIST = 0x0, MLX5_WQ_TYPE_CYCLIC = 0x1, - MLX5_WQ_TYPE_STRQ = 0x2, + MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ = 0x2, }; enum { @@ -753,7 +755,11 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 early_vf_enable[0x1]; u8 reserved_at_1a9[0x2]; u8 local_ca_ack_delay[0x5]; - u8 reserved_at_1af[0x6]; + u8 reserved_at_1af[0x2]; + u8 ports_check[0x1]; + u8 reserved_at_1b2[0x1]; + u8 disable_link_up[0x1]; + u8 beacon_led[0x1]; u8 port_type[0x2]; u8 num_ports[0x8]; @@ -778,7 +784,8 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 cqe_version[0x4]; u8 compact_address_vector[0x1]; - u8 reserved_at_200[0x3]; + u8 striding_rq[0x1]; + u8 reserved_at_201[0x2]; u8 ipoib_basic_offloads[0x1]; u8 reserved_at_205[0xa]; u8 drain_sigerr[0x1]; @@ -807,12 +814,12 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 block_lb_mc[0x1]; u8 reserved_at_229[0x1]; u8 scqe_break_moderation[0x1]; - u8 reserved_at_22a[0x1]; + u8 cq_period_start_from_cqe[0x1]; u8 cd[0x1]; u8 reserved_at_22d[0x1]; u8 apm[0x1]; u8 vector_calc[0x1]; - u8 reserved_at_22f[0x1]; + u8 umr_ptr_rlky[0x1]; u8 imaicl[0x1]; u8 reserved_at_232[0x4]; u8 qkv[0x1]; @@ -913,10 +920,10 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 reserved_at_500[0x80]; u8 reserved_at_580[0x3f]; - u8 cqe_zip[0x1]; + u8 cqe_compression[0x1]; - u8 cqe_zip_timeout[0x10]; - u8 cqe_zip_max_num[0x10]; + u8 cqe_compression_timeout[0x10]; + u8 cqe_compression_max_num[0x10]; u8 reserved_at_5e0[0x220]; }; @@ -1000,7 +1007,13 @@ struct mlx5_ifc_wq_bits { u8 reserved_at_118[0x3]; u8 log_wq_sz[0x5]; - u8 reserved_at_120[0x4e0]; + u8 reserved_at_120[0x15]; + u8 log_wqe_num_of_strides[0x3]; + u8 two_byte_shift_en[0x1]; + u8 reserved_at_139[0x4]; + u8 log_wqe_stride_size[0x3]; + + u8 reserved_at_140[0x4c0]; struct mlx5_ifc_cmd_pas_bits pas[0]; }; @@ -2199,7 +2212,8 @@ struct mlx5_ifc_sqc_bits { u8 flush_in_error_en[0x1]; u8 reserved_at_4[0x4]; u8 state[0x4]; - u8 reserved_at_c[0x14]; + u8 reg_umr[0x1]; + u8 reserved_at_d[0x13]; u8 reserved_at_20[0x8]; u8 user_index[0x18]; @@ -2247,7 +2261,8 @@ enum { struct mlx5_ifc_rqc_bits { u8 rlky[0x1]; - u8 reserved_at_1[0x2]; + u8 reserved_at_1[0x1]; + u8 scatter_fcs[0x1]; u8 vsd[0x1]; u8 mem_rq_type[0x4]; u8 state[0x4]; @@ -2604,6 +2619,11 @@ enum { MLX5_CQC_ST_FIRED = 0xa, }; +enum { + MLX5_CQ_PERIOD_MODE_START_FROM_EQE = 0x0, + MLX5_CQ_PERIOD_MODE_START_FROM_CQE = 0x1, +}; + struct mlx5_ifc_cqc_bits { u8 status[0x4]; u8 reserved_at_4[0x4]; @@ -2612,8 +2632,8 @@ struct mlx5_ifc_cqc_bits { u8 reserved_at_c[0x1]; u8 scqe_break_moderation_en[0x1]; u8 oi[0x1]; - u8 reserved_at_f[0x2]; - u8 cqe_zip_en[0x1]; + u8 cq_period_mode[0x2]; + u8 cqe_comp_en[0x1]; u8 mini_cqe_res_format[0x2]; u8 st[0x4]; u8 reserved_at_18[0x8]; @@ -2987,7 +3007,11 @@ struct mlx5_ifc_set_fte_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -5181,7 +5205,11 @@ struct mlx5_ifc_destroy_flow_table_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -5208,7 +5236,11 @@ struct mlx5_ifc_destroy_flow_group_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -5349,7 +5381,11 @@ struct mlx5_ifc_delete_fte_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -5795,7 +5831,11 @@ struct mlx5_ifc_create_flow_table_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -5839,7 +5879,11 @@ struct mlx5_ifc_create_flow_group_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -6372,6 +6416,17 @@ struct mlx5_ifc_ptys_reg_bits { u8 reserved_at_1a0[0x60]; }; +struct mlx5_ifc_mlcr_reg_bits { + u8 reserved_at_0[0x8]; + u8 local_port[0x8]; + u8 reserved_at_10[0x20]; + + u8 beacon_duration[0x10]; + u8 reserved_at_40[0x10]; + + u8 beacon_remain[0x10]; +}; + struct mlx5_ifc_ptas_reg_bits { u8 reserved_at_0[0x20]; @@ -6781,6 +6836,16 @@ struct mlx5_ifc_pamp_reg_bits { u8 index_data[18][0x10]; }; +struct mlx5_ifc_pcmr_reg_bits { + u8 reserved_at_0[0x8]; + u8 local_port[0x8]; + u8 reserved_at_10[0x2e]; + u8 fcs_cap[0x1]; + u8 reserved_at_3f[0x1f]; + u8 fcs_chk[0x1]; + u8 reserved_at_5f[0x1]; +}; + struct mlx5_ifc_lane_2_module_mapping_bits { u8 reserved_at_0[0x6]; u8 rx_lane[0x2]; @@ -7117,6 +7182,7 @@ union mlx5_ifc_ports_control_registers_document_bits { struct mlx5_ifc_pspa_reg_bits pspa_reg; struct mlx5_ifc_ptas_reg_bits ptas_reg; struct mlx5_ifc_ptys_reg_bits ptys_reg; + struct mlx5_ifc_mlcr_reg_bits mlcr_reg; struct mlx5_ifc_pude_reg_bits pude_reg; struct mlx5_ifc_pvlc_reg_bits pvlc_reg; struct mlx5_ifc_slrg_reg_bits slrg_reg; @@ -7150,7 +7216,11 @@ struct mlx5_ifc_set_flow_table_root_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x40]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; + + u8 reserved_at_60[0x20]; u8 table_type[0x8]; u8 reserved_at_88[0x18]; @@ -7181,7 +7251,9 @@ struct mlx5_ifc_modify_flow_table_in_bits { u8 reserved_at_20[0x10]; u8 op_mod[0x10]; - u8 reserved_at_40[0x20]; + u8 other_vport[0x1]; + u8 reserved_at_41[0xf]; + u8 vport_number[0x10]; u8 reserved_at_60[0x10]; u8 modify_field_select[0x10]; @@ -7247,4 +7319,34 @@ struct mlx5_ifc_qtct_reg_bits { u8 tclass[0x3]; }; +struct mlx5_ifc_mcia_reg_bits { + u8 l[0x1]; + u8 reserved_at_1[0x7]; + u8 module[0x8]; + u8 reserved_at_10[0x8]; + u8 status[0x8]; + + u8 i2c_device_address[0x8]; + u8 page_number[0x8]; + u8 device_address[0x10]; + + u8 reserved_at_40[0x10]; + u8 size[0x10]; + + u8 reserved_at_60[0x20]; + + u8 dword_0[0x20]; + u8 dword_1[0x20]; + u8 dword_2[0x20]; + u8 dword_3[0x20]; + u8 dword_4[0x20]; + u8 dword_5[0x20]; + u8 dword_6[0x20]; + u8 dword_7[0x20]; + u8 dword_8[0x20]; + u8 dword_9[0x20]; + u8 dword_10[0x20]; + u8 dword_11[0x20]; +}; + #endif /* MLX5_IFC_H */