[v5] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board

Message ID	1460408496-21164-1-git-send-email-gary.bisson@boundarydevices.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Gary Bisson <gary.bisson@boundarydevices.com> To: devicetree@vger.kernel.org Subject: [PATCH v5] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board Date: Mon, 11 Apr 2016 23:01:36 +0200 Message-Id: <1460408496-21164-1-git-send-email-gary.bisson@boundarydevices.com> In-Reply-To: <1460037168-23292-1-git-send-email-gary.bisson@boundarydevices.com> References: <1460037168-23292-1-git-send-email-gary.bisson@boundarydevices.com> Precedence: list Cc: linux@arm.linux.org.uk, Gary Bisson <gary.bisson@boundarydevices.com>, robh+dt@kernel.org, kernel@pengutronix.de, shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 54306aa..9eab5f5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -371,6 +371,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts new file mode 100644 index 0000000..ba62348 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -0,0 +1,709 @@ +/* + * Copyright (C) 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx.dtsi" + +/ { + model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; + compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; + + aliases { + fb_lcd = &lcdif1; + t_lcd = &t_lcd; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&reg_3p3v>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can1_3v3: regulator-can1-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can1-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan: regulator-wlan { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wlan>; + compatible = "regulator-fixed"; + clocks = <&clks IMX6SX_CLK_CKO>; + clock-names = "slow"; + regulator-name = "wlan-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <70000>; + gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6sx-nitrogen6sx-sgtl5000"; + cpu-dai = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0xc0000>; + read-only; + }; + + partition@c0000 { + label = "env"; + reg = <0xc0000 0x2000>; + read-only; + }; + + partition@c2000 { + label = "Kernel"; + reg = <0xc2000 0x11e000>; + }; + + partition@1e0000 { + label = "M4"; + reg = <0x1e0000 0x20000>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii"; + phy-handle = <&ethphy1>; + phy-supply = <&reg_3p3v>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@4 { + reg = <4>; + }; + + ethphy2: ethernet-phy@5 { + reg = <5>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rgmii"; + phy-handle = <&ethphy2>; + phy-supply = <&reg_3p3v>; + fsl,magic-packet; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&reg_can1_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&reg_can2_3v3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks IMX6SX_CLK_CKO2>; + VDDA-supply = <&reg_1p8v>; + VDDIO-supply = <&reg_1p8v>; + VDDD-supply = <&reg_1p8v>; + assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>, + <&clks IMX6SX_CLK_CKO2>; + assigned-clock-parents = <&clks IMX6SX_CLK_OSC>; + assigned-clock-rates = <0>, <24000000>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif1>; + lcd-supply = <&reg_3p3v>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&t_lcd>; + t_lcd: t_lcd_default { + clock-frequency = <74160000>; + hactive = <1280>; + vactive = <720>; + hback-porch = <220>; + hfront-porch = <110>; + vback-porch = <20>; + vfront-porch = <5>; + hsync-len = <40>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <&reg_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + disable-over-current; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + vmmc-supply = <&reg_wlan>; + cap-power-off-card; + cap-sdio-irq; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + non-removable; + vmmc-supply = <&reg_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x1b0b0 + MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x1b0b0 + MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x1b0b0 + MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x0b0b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x1b0b0 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x1b0b0 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x30b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x30b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x30b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x30b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x30b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x30b1 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0xb0b0 + MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0xb0b0 + MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0xb0b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x30b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x30b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x30b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x30b1 + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x30b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x30b1 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0xb0b0 + MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0xb0b0 + MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0xb0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x0b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x1b0b0 + MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x1b0b0 + MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x1b0b0 + MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x1b0b0 + MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x1b0b0 + MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x1b0b0 + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x1b0b0 + MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x000b0 + MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x1b0b0 + /* Test points */ + MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x1b0b0 + MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1 + MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1 + MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcdif1: lcdif1grp { + fsl,pins = < + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 + MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0xb0b0 + MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0xb0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_reg_wlan: reg-wlangrp { + fsl,pins = < + MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x1b0b0 + MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x000b0 + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x1b0b0 + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x1b0b0 + MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0xb0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1 + MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1 + MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x1b0b0 + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x170b1 + >; + }; + + pinctrl_usbotg1_vbus: usbotg1-vbusgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x1b0b0 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0xb0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10071 + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17071 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17071 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17071 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17071 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17071 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10071 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17071 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17071 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17071 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17071 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17071 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17071 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17071 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17071 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17071 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17071 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +};

[v5] ARM: dts: imx: add Boundary Devices Nitrogen6_SoloX board

Commit Message

Comments

Patch