| Message ID | 1459580269-64531-1-git-send-email-yingjoe.chen@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Apr 2, 2016 at 2:57 PM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote: > The debounce time unit for gpio_chip.set_debounce is us but > mtk_gpio_set_debounce regard it as ms. > Fix this by correct debounce time array dbnc_arr so it can find correct > debounce setting. Debounce time for first debounce setting is 500us, > correct this as well. > > While I'm at it, also change the debounce time array name to > "debounce_time" for readability. > > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> > --- > This was based on v4.6-rc1 > Change since v1: > - Improve commit message. > - Change dbnc_arr name to debounce_time > --- > drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > index 2bbe6f7..6ab8c3c 100644 > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > @@ -1004,7 +1004,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, > struct mtk_pinctrl *pctl = dev_get_drvdata(chip->parent); > int eint_num, virq, eint_offset; > unsigned int set_offset, bit, clr_bit, clr_offset, rst, i, unmask, dbnc; > - static const unsigned int dbnc_arr[] = {0 , 1, 16, 32, 64, 128, 256}; > + static const unsigned int debounce_time[] = {500, 1000, 16000, 32000, 64000, > + 128000, 256000}; > const struct mtk_desc_pin *pin; > struct irq_data *d; > > @@ -1022,9 +1023,9 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, > if (!mtk_eint_can_en_debounce(pctl, eint_num)) > return -ENOSYS; > > - dbnc = ARRAY_SIZE(dbnc_arr); > - for (i = 0; i < ARRAY_SIZE(dbnc_arr); i++) { > - if (debounce <= dbnc_arr[i]) { > + dbnc = ARRAY_SIZE(debounce_time); > + for (i = 0; i < ARRAY_SIZE(debounce_time); i++) { > + if (debounce <= debounce_time[i]) { > dbnc = i; > break; > } > -- > 1.9.1 >
On Sat, 2016-04-02 at 14:57 +0800, Yingjoe Chen wrote: > The debounce time unit for gpio_chip.set_debounce is us but > mtk_gpio_set_debounce regard it as ms. > Fix this by correct debounce time array dbnc_arr so it can find correct > debounce setting. Debounce time for first debounce setting is 500us, > correct this as well. > > While I'm at it, also change the debounce time array name to > "debounce_time" for readability. > > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> > --- > This was based on v4.6-rc1 > Change since v1: > - Improve commit message. > - Change dbnc_arr name to debounce_time > --- > drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > index 2bbe6f7..6ab8c3c 100644 > --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c > @@ -1004,7 +1004,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, > struct mtk_pinctrl *pctl = dev_get_drvdata(chip->parent); > int eint_num, virq, eint_offset; > unsigned int set_offset, bit, clr_bit, clr_offset, rst, i, unmask, dbnc; > - static const unsigned int dbnc_arr[] = {0 , 1, 16, 32, 64, 128, 256}; > + static const unsigned int debounce_time[] = {500, 1000, 16000, 32000, 64000, > + 128000, 256000}; > const struct mtk_desc_pin *pin; > struct irq_data *d; > > @@ -1022,9 +1023,9 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, > if (!mtk_eint_can_en_debounce(pctl, eint_num)) > return -ENOSYS; > > - dbnc = ARRAY_SIZE(dbnc_arr); > - for (i = 0; i < ARRAY_SIZE(dbnc_arr); i++) { > - if (debounce <= dbnc_arr[i]) { > + dbnc = ARRAY_SIZE(debounce_time); > + for (i = 0; i < ARRAY_SIZE(debounce_time); i++) { > + if (debounce <= debounce_time[i]) { > dbnc = i; > break; > }
On Sat, Apr 2, 2016 at 8:57 AM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote: > The debounce time unit for gpio_chip.set_debounce is us but > mtk_gpio_set_debounce regard it as ms. > Fix this by correct debounce time array dbnc_arr so it can find correct > debounce setting. Debounce time for first debounce setting is 500us, > correct this as well. > > While I'm at it, also change the debounce time array name to > "debounce_time" for readability. > > Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> > --- > This was based on v4.6-rc1 > Change since v1: > - Improve commit message. > - Change dbnc_arr name to debounce_time Patch applied to fixes and tagged for stable. Yours, Linus Walleij
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index 2bbe6f7..6ab8c3c 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -1004,7 +1004,8 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, struct mtk_pinctrl *pctl = dev_get_drvdata(chip->parent); int eint_num, virq, eint_offset; unsigned int set_offset, bit, clr_bit, clr_offset, rst, i, unmask, dbnc; - static const unsigned int dbnc_arr[] = {0 , 1, 16, 32, 64, 128, 256}; + static const unsigned int debounce_time[] = {500, 1000, 16000, 32000, 64000, + 128000, 256000}; const struct mtk_desc_pin *pin; struct irq_data *d; @@ -1022,9 +1023,9 @@ static int mtk_gpio_set_debounce(struct gpio_chip *chip, unsigned offset, if (!mtk_eint_can_en_debounce(pctl, eint_num)) return -ENOSYS; - dbnc = ARRAY_SIZE(dbnc_arr); - for (i = 0; i < ARRAY_SIZE(dbnc_arr); i++) { - if (debounce <= dbnc_arr[i]) { + dbnc = ARRAY_SIZE(debounce_time); + for (i = 0; i < ARRAY_SIZE(debounce_time); i++) { + if (debounce <= debounce_time[i]) { dbnc = i; break; }
The debounce time unit for gpio_chip.set_debounce is us but mtk_gpio_set_debounce regard it as ms. Fix this by correct debounce time array dbnc_arr so it can find correct debounce setting. Debounce time for first debounce setting is 500us, correct this as well. While I'm at it, also change the debounce time array name to "debounce_time" for readability. Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> --- This was based on v4.6-rc1 Change since v1: - Improve commit message. - Change dbnc_arr name to debounce_time --- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)