| Message ID | 1460788643-18590-1-git-send-email-ivo.g.dimitrov.75@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Ivo, On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: > Without that, regulators are left in the mode last set by the bootloader or > by the kernel the device was rebooted from. This leads to various problems > like non-working peripherals. > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> > --- > arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index b3c26a9..1bb36e2 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -329,6 +329,7 @@ > regulator-name = "V28"; > regulator-min-microvolt = <2800000>; > regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <0x0e>; > regulator-always-on; /* due to battery cover sensor */ > }; I think this should either get an additional comment like /* MODE_NORMAL */ or implemented using a define and a TWL4030_REGULATOR_MODE_NORMAL constant to keep the *.dts easily readable. -- Sebastian
On 17.04.2016 03:05, Sebastian Reichel wrote: > Hi Ivo, > > On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: >> Without that, regulators are left in the mode last set by the bootloader or >> by the kernel the device was rebooted from. This leads to various problems >> like non-working peripherals. >> >> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> >> --- >> arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts >> index b3c26a9..1bb36e2 100644 >> --- a/arch/arm/boot/dts/omap3-n900.dts >> +++ b/arch/arm/boot/dts/omap3-n900.dts >> @@ -329,6 +329,7 @@ >> regulator-name = "V28"; >> regulator-min-microvolt = <2800000>; >> regulator-max-microvolt = <2800000>; >> + regulator-initial-mode = <0x0e>; >> regulator-always-on; /* due to battery cover sensor */ >> }; > > I think this should either get an additional > comment like /* MODE_NORMAL */ or implemented According to the TRM, this is 'ACTIVE state', but that does not fit in the regulator framework terminology. > using a define and a TWL4030_REGULATOR_MODE_NORMAL > constant to keep the *.dts easily readable. We already have RES_STATE_ACTIVE defined in linux/i2c/twl.h, is there a way to include that in a dts? Ivo -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Sun, Apr 17, 2016 at 09:14:08AM +0300, Ivaylo Dimitrov wrote: > On 17.04.2016 03:05, Sebastian Reichel wrote: > >On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: > >>Without that, regulators are left in the mode last set by the bootloader or > >>by the kernel the device was rebooted from. This leads to various problems > >>like non-working peripherals. > >> > >>Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> > >>--- > >> arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > >> 1 file changed, 9 insertions(+) > >> > >>diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > >>index b3c26a9..1bb36e2 100644 > >>--- a/arch/arm/boot/dts/omap3-n900.dts > >>+++ b/arch/arm/boot/dts/omap3-n900.dts > >>@@ -329,6 +329,7 @@ > >> regulator-name = "V28"; > >> regulator-min-microvolt = <2800000>; > >> regulator-max-microvolt = <2800000>; > >>+ regulator-initial-mode = <0x0e>; > >> regulator-always-on; /* due to battery cover sensor */ > >> }; > > > >I think this should either get an additional > >comment like /* MODE_NORMAL */ or implemented > > According to the TRM, this is 'ACTIVE state', but that does not fit in the > regulator framework terminology. No problem with using STATE_ACTIVE or any other fitting description. IMHO that "active" is misleading for regulators without "always-on/boot-on" tag, but that was TI's decision. > >using a define and a TWL4030_REGULATOR_MODE_NORMAL > >constant to keep the *.dts easily readable. > > We already have RES_STATE_ACTIVE defined in linux/i2c/twl.h, is there a way > to include that in a dts? Not in its current state. During kernel build the C preprocessor is applied on the *.dts files. So the header may only contain preprocessor macros (e.g. #define). For that solution something like ~/src/linux/include/dt-bindings/regulator/maxim,max77802.h should be created for the twl regulator. -- Sebastian
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b3c26a9..1bb36e2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -329,6 +329,7 @@ regulator-name = "V28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; /* due to battery cover sensor */ }; @@ -336,30 +337,35 @@ regulator-name = "VCSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; }; &vaux3 { regulator-name = "VMMC2_30"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; }; &vaux4 { regulator-name = "VCAM_ANA_28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-initial-mode = <0x0e>; }; &vmmc1 { regulator-name = "VMMC1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; + regulator-initial-mode = <0x0e>; }; &vmmc2 { regulator-name = "V28_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3000000>; + regulator-initial-mode = <0x0e>; regulator-always-on; /* due VIO leak to AIC34 VDDs */ }; @@ -367,6 +373,7 @@ regulator-name = "VPLL"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; }; @@ -374,6 +381,7 @@ regulator-name = "VSDI_CSI"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; regulator-always-on; }; @@ -381,6 +389,7 @@ regulator-name = "VMMC2_IO_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-initial-mode = <0x0e>; }; &vio {
Without that, regulators are left in the mode last set by the bootloader or by the kernel the device was rebooted from. This leads to various problems like non-working peripherals. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> --- arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ 1 file changed, 9 insertions(+)