diff mbox

[v2,2/2] i2c: s3c2410: Check clk_prepare_enable() return value

Message ID 1461163076-5959-2-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas April 20, 2016, 2:37 p.m. UTC
The clk_prepare_enable() function can fail so check the return
value and propagate the error in case of a failure.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes in v2:
- Don't print the errno code since that's already printed by the
  core when probe fails. Suggested by Krzysztof Kozlowski.

 drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski April 21, 2016, 7:19 a.m. UTC | #1
On 04/20/2016 04:37 PM, Javier Martinez Canillas wrote:
> The clk_prepare_enable() function can fail so check the return
> value and propagate the error in case of a failure.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> ---
> 
> Changes in v2:
> - Don't print the errno code since that's already printed by the
>   core when probe fails. Suggested by Krzysztof Kozlowski.
> 
>  drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Tested on Trats2 (Exynos4412, samsung,s3c2440-i2c)
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof
Wolfram Sang April 25, 2016, 10:20 p.m. UTC | #2
On Wed, Apr 20, 2016 at 10:37:56AM -0400, Javier Martinez Canillas wrote:
> The clk_prepare_enable() function can fail so check the return
> value and propagate the error in case of a failure.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 

Applied to for-next, thanks!
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 13f67df65c45..8a9ea0c1e41d 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1196,7 +1196,12 @@  static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	/* initialise the i2c controller */
 
-	clk_prepare_enable(i2c->clk);
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "I2C clock enable failed\n");
+		return ret;
+	}
+
 	ret = s3c24xx_i2c_init(i2c);
 	clk_disable(i2c->clk);
 	if (ret != 0) {