diff mbox

[v3,4/8] regulator: rk808: Migrate to regulator core's simplified DT parsing code

Message ID 1461590448-47685-5-git-send-email-w.egorov@phytec.de (mailing list archive)
State New, archived
Headers show

Commit Message

Wadim Egorov April 25, 2016, 1:20 p.m. UTC 
A common simplified DT parsing code for regulators was introduced in
commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
method")

While at it also added RK8XX_DESC and RK8XX_DESC_SWITCH macros for the
regulator_desc struct initialization. This just makes the driver more compact.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
 drivers/regulator/rk808-regulator.c | 252 ++++++++++++------------------------
 1 file changed, 80 insertions(+), 172 deletions(-)

Comments

Mark Brown April 25, 2016, 5:39 p.m. UTC | #1 
On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> A common simplified DT parsing code for regulators was introduced in
> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> method")

This doesn't apply against current code, please check and resend.
Wadim Egorov April 26, 2016, 7:45 a.m. UTC | #2 
On 25.04.2016 19:39, Mark Brown wrote:
> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>> A common simplified DT parsing code for regulators was introduced in
>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>> method")
> This doesn't apply against current code, please check and resend.

Hm, for me all patches apply to the current code.
This patch depends on the first rename patch. Maybe this is the problem?
Heiko Stuebner April 26, 2016, 8:17 a.m. UTC | #3 
Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
> On 25.04.2016 19:39, Mark Brown wrote:
> > On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
> >> A common simplified DT parsing code for regulators was introduced in
> >> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
> >> method")
> > 
> > This doesn't apply against current code, please check and resend.
> 
> Hm, for me all patches apply to the current code.
> This patch depends on the first rename patch. Maybe this is the problem?

which is the reason why renaming stuff makes everything just more complicated 
without providing additional value ;-) 

The first patch would go through the mfd-tree (if accepted by Lee and Acked by 
the other involved subsystem maintainers) which would then need a stable 
branch merged into the regulator tree - or after the first patch goes in you 
simply wait for a kernel release.

Normally I would expect the reasonable kernel developer to be able to simply 
read code, kconfig, docs stating the drivers being for rk808 and rk818 without 
getting "confused" by some structs mentioning the rk808.


Heiko
Wadim Egorov April 26, 2016, 8:46 a.m. UTC | #4 
On 26.04.2016 10:17, Heiko Stübner wrote:
> Am Dienstag, 26. April 2016, 09:45:56 schrieb Wadim Egorov:
>> On 25.04.2016 19:39, Mark Brown wrote:
>>> On Mon, Apr 25, 2016 at 03:20:44PM +0200, Wadim Egorov wrote:
>>>> A common simplified DT parsing code for regulators was introduced in
>>>> commit a0c7b164ad11 ("regulator: of: Provide simplified DT parsing
>>>> method")
>>> This doesn't apply against current code, please check and resend.
>> Hm, for me all patches apply to the current code.
>> This patch depends on the first rename patch. Maybe this is the problem?
> which is the reason why renaming stuff makes everything just more complicated 
> without providing additional value ;-) 
>
> The first patch would go through the mfd-tree (if accepted by Lee and Acked by 
> the other involved subsystem maintainers) which would then need a stable 
> branch merged into the regulator tree - or after the first patch goes in you 
> simply wait for a kernel release.
>
> Normally I would expect the reasonable kernel developer to be able to simply 
> read code, kconfig, docs stating the drivers being for rk808 and rk818 without 
> getting "confused" by some structs mentioning the rk808.
>
>
> Heiko
I will drop the first patch and send a v4 later
diff mbox

Patch

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 32cf1b5..b30c906 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -55,6 +55,42 @@ 
 /* max steps for increase voltage of Buck1/2, equal 100mv*/
 #define MAX_STEPS_ONE_TIME 8
 
+#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
+	_vmask, _ereg, _emask, _etime)					\
+	[_id] = {							\
+		.name		= (_match),				\
+		.supply_name	= (_supply),				\
+		.of_match	= of_match_ptr(_match),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type		= REGULATOR_VOLTAGE,			\
+		.id		= (_id),				\
+		.n_voltages	= (((_max) - (_min)) / (_step) + 1),	\
+		.owner		= THIS_MODULE,				\
+		.min_uV		= (_min) * 1000,			\
+		.uV_step	= (_step) * 1000,			\
+		.vsel_reg	= (_vreg),				\
+		.vsel_mask	= (_vmask),				\
+		.enable_reg	= (_ereg),				\
+		.enable_mask	= (_emask),				\
+		.enable_time	= (_etime),				\
+		.ops		= &rk808_reg_ops,			\
+	}
+
+#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask)		\
+	[_id] = {							\
+		.name		= (_match),				\
+		.supply_name	= (_supply),				\
+		.of_match	= of_match_ptr(_match),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.type		= REGULATOR_VOLTAGE,			\
+		.id		= (_id),				\
+		.enable_reg	= (_ereg),				\
+		.enable_mask	= (_emask),				\
+		.owner		= THIS_MODULE,				\
+		.ops		= &rk808_switch_ops			\
+	}
+
+
 struct rk808_regulator_data {
 	struct gpio_desc *dvs_gpio[2];
 };
@@ -328,6 +364,8 @@  static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
 		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC1,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
@@ -342,6 +380,8 @@  static const struct regulator_desc rk808_reg[] = {
 	}, {
 		.name = "DCDC_REG2",
 		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC2,
 		.ops = &rk808_buck1_2_ops,
 		.type = REGULATOR_VOLTAGE,
@@ -356,6 +396,8 @@  static const struct regulator_desc rk808_reg[] = {
 	}, {
 		.name = "DCDC_REG3",
 		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_DCDC3,
 		.ops = &rk808_switch_ops,
 		.type = REGULATOR_VOLTAGE,
@@ -363,55 +405,23 @@  static const struct regulator_desc rk808_reg[] = {
 		.enable_reg = RK808_DCDC_EN_REG,
 		.enable_mask = BIT(2),
 		.owner = THIS_MODULE,
-	}, {
-		.name = "DCDC_REG4",
-		.supply_name = "vcc4",
-		.id = RK808_ID_DCDC4,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 16,
-		.vsel_reg = RK808_BUCK4_ON_VSEL_REG,
-		.vsel_mask = RK808_BUCK4_VSEL_MASK,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(3),
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG1",
-		.supply_name = "vcc6",
-		.id = RK808_ID_LDO1,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 17,
-		.vsel_reg = RK808_LDO1_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(0),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG2",
-		.supply_name = "vcc6",
-		.id = RK808_ID_LDO2,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 17,
-		.vsel_reg = RK808_LDO2_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(1),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
+	},
+	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
+		RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
+		RK808_DCDC_EN_REG, BIT(3), 0),
+	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
+		RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(0), 400),
+	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
+		RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(1), 400),
+	{
 		.name = "LDO_REG3",
 		.supply_name = "vcc7",
+		.of_match = of_match_ptr("LDO_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
 		.id = RK808_ID_LDO3,
-		.ops = &rk808_reg_ops,
+		.ops = &rk808_reg_ops_ranges,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 16,
 		.linear_ranges = rk808_ldo3_voltage_ranges,
@@ -422,117 +432,26 @@  static const struct regulator_desc rk808_reg[] = {
 		.enable_mask = BIT(2),
 		.enable_time = 400,
 		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG4",
-		.supply_name = "vcc9",
-		.id = RK808_ID_LDO4,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 17,
-		.vsel_reg = RK808_LDO4_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(3),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG5",
-		.supply_name = "vcc9",
-		.id = RK808_ID_LDO5,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 17,
-		.vsel_reg = RK808_LDO5_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(4),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG6",
-		.supply_name = "vcc10",
-		.id = RK808_ID_LDO6,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 800000,
-		.uV_step = 100000,
-		.n_voltages = 18,
-		.vsel_reg = RK808_LDO6_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(5),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG7",
-		.supply_name = "vcc7",
-		.id = RK808_ID_LDO7,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 800000,
-		.uV_step = 100000,
-		.n_voltages = 18,
-		.vsel_reg = RK808_LDO7_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(6),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "LDO_REG8",
-		.supply_name = "vcc11",
-		.id = RK808_ID_LDO8,
-		.ops = &rk808_reg_ops,
-		.type = REGULATOR_VOLTAGE,
-		.min_uV = 1800000,
-		.uV_step = 100000,
-		.n_voltages = 17,
-		.vsel_reg = RK808_LDO8_ON_VSEL_REG,
-		.vsel_mask = RK808_LDO_VSEL_MASK,
-		.enable_reg = RK808_LDO_EN_REG,
-		.enable_mask = BIT(7),
-		.enable_time = 400,
-		.owner = THIS_MODULE,
-	}, {
-		.name = "SWITCH_REG1",
-		.supply_name = "vcc8",
-		.id = RK808_ID_SWITCH1,
-		.ops = &rk808_switch_ops,
-		.type = REGULATOR_VOLTAGE,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(5),
-		.owner = THIS_MODULE,
-	}, {
-		.name = "SWITCH_REG2",
-		.supply_name = "vcc12",
-		.id = RK808_ID_SWITCH2,
-		.ops = &rk808_switch_ops,
-		.type = REGULATOR_VOLTAGE,
-		.enable_reg = RK808_DCDC_EN_REG,
-		.enable_mask = BIT(6),
-		.owner = THIS_MODULE,
 	},
-};
-
-static struct of_regulator_match rk808_reg_matches[] = {
-	[RK808_ID_DCDC1]	= { .name = "DCDC_REG1" },
-	[RK808_ID_DCDC2]	= { .name = "DCDC_REG2" },
-	[RK808_ID_DCDC3]	= { .name = "DCDC_REG3" },
-	[RK808_ID_DCDC4]	= { .name = "DCDC_REG4" },
-	[RK808_ID_LDO1]		= { .name = "LDO_REG1" },
-	[RK808_ID_LDO2]		= { .name = "LDO_REG2" },
-	[RK808_ID_LDO3]		= { .name = "LDO_REG3" },
-	[RK808_ID_LDO4]		= { .name = "LDO_REG4" },
-	[RK808_ID_LDO5]		= { .name = "LDO_REG5" },
-	[RK808_ID_LDO6]		= { .name = "LDO_REG6" },
-	[RK808_ID_LDO7]		= { .name = "LDO_REG7" },
-	[RK808_ID_LDO8]		= { .name = "LDO_REG8" },
-	[RK808_ID_SWITCH1]	= { .name = "SWITCH_REG1" },
-	[RK808_ID_SWITCH2]	= { .name = "SWITCH_REG2" },
+	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
+		RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(3), 400),
+	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
+		RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(4), 400),
+	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
+		RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(5), 400),
+	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
+		RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(6), 400),
+	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
+		RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
+		BIT(7), 400),
+	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
+		RK808_DCDC_EN_REG, BIT(5)),
+	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
+		RK808_DCDC_EN_REG, BIT(6)),
 };
 
 static int rk808_regulator_dt_parse_pdata(struct device *dev,
@@ -541,17 +460,12 @@  static int rk808_regulator_dt_parse_pdata(struct device *dev,
 				   struct rk808_regulator_data *pdata)
 {
 	struct device_node *np;
-	int tmp, ret, i;
+	int tmp, ret = 0, i;
 
 	np = of_get_child_by_name(client_dev->of_node, "regulators");
 	if (!np)
 		return -ENXIO;
 
-	ret = of_regulator_match(dev, np, rk808_reg_matches,
-				 RK808_NUM_REGULATORS);
-	if (ret < 0)
-		goto dt_parse_end;
-
 	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
 		pdata->dvs_gpio[i] =
 			devm_gpiod_get_index_optional(client_dev, "dvs", i,
@@ -598,18 +512,12 @@  static int rk808_regulator_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pdata);
 
+	config.dev = &client->dev;
+	config.driver_data = pdata;
+	config.regmap = rk8xx->regmap;
+
 	/* Instantiate the regulators */
 	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
-		if (!rk808_reg_matches[i].init_data ||
-		    !rk808_reg_matches[i].of_node)
-			continue;
-
-		config.dev = &client->dev;
-		config.driver_data = pdata;
-		config.regmap = rk8xx->regmap;
-		config.of_node = rk808_reg_matches[i].of_node;
-		config.init_data = rk808_reg_matches[i].init_data;
-
 		rk808_rdev = devm_regulator_register(&pdev->dev,
 						     &rk808_reg[i], &config);
 		if (IS_ERR(rk808_rdev)) {