| Message ID | 1460626319-14516-12-git-send-email-rnayak@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Apr 14, 2016 at 03:01:59PM +0530, Rajendra Nayak wrote: > Add thermal zones, tsens and qfprom nodes > > Cc: Andy Gross <agross@codeaurora.org> > Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++++++++++++++++++++++++++++++ > 1 file changed, 92 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index 0506fb8..4b36929 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -97,6 +97,92 @@ > }; > }; > > + thermal-zones { > + cpu-thermal0 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 3>; > + > + trips { > + cpu_alert0: trip@0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_crit0: trip@1 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; cooling devices?
On 04/28/2016 05:33 AM, Eduardo Valentin wrote: > On Thu, Apr 14, 2016 at 03:01:59PM +0530, Rajendra Nayak wrote: >> Add thermal zones, tsens and qfprom nodes >> >> Cc: Andy Gross <agross@codeaurora.org> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++++++++++++++++++++++++++++++ >> 1 file changed, 92 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi >> index 0506fb8..4b36929 100644 >> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi >> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi >> @@ -97,6 +97,92 @@ >> }; >> }; >> >> + thermal-zones { >> + cpu-thermal0 { >> + polling-delay-passive = <250>; >> + polling-delay = <1000>; >> + >> + thermal-sensors = <&tsens0 3>; >> + >> + trips { >> + cpu_alert0: trip@0 { >> + temperature = <75000>; >> + hysteresis = <2000>; >> + type = "passive"; >> + }; >> + >> + cpu_crit0: trip@1 { >> + temperature = <110000>; >> + hysteresis = <2000>; >> + type = "critical"; >> + }; > > > cooling devices? We are still missing cpufreq support for these devices upstream >
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 0506fb8..4b36929 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -97,6 +97,92 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu_alert0: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip@1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu_alert1: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip@1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert2: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip@1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert3: trip@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip@1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -151,6 +237,12 @@ reg = <0x300000 0x90000>; }; + tsens0: thermal-sensor@4a8000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4a8000 0x2000>; + #thermal-sensor-cells = <1>; + }; + blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x75b0000 0x1000>;
Add thermal zones, tsens and qfprom nodes Cc: Andy Gross <agross@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+)