| Message ID | 1462000432-18452-1-git-send-email-lkundrak@v3.sk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/30/2016 01:13 AM, Lubomir Rintel wrote: > The hub and the ethernet in its port 1 are hardwired on the board. > > Compared to the adapters that can be plugged into the USB ports, this > one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi > has the MAC address for this adapter in its ROM, accessible from its > firmware. > > U-Boot can read out the address and set the local-mac-address property of the > node with "ethernet" alias. Let's add the node so that U-Boot can do its > business. > > Model B rev2 and Model B+ entries were verified by me, the hierarchy and > pid/vid pair for the Version 2 was provided by Peter Chen. Original > Model B is a blind short, though very likely correct. Acked-by: Stephen Warren <swarren@wwwdotorg.org> One nit: > diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi > new file mode 100644 > index 0000000..7200238 > --- /dev/null > +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi > @@ -0,0 +1,20 @@ > + > +/ { There's an extra blank line at the top of the file.
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index ef54050..c3e01ce 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 86f1f2f..364086a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 4859e9d..4420b09 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index ff94666..b975f29 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2836.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi new file mode 100644 index 0000000..7200238 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -0,0 +1,20 @@ + +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9512"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi new file mode 100644 index 0000000..3f0a56e --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 8aaf193..04504b7 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -230,6 +230,8 @@ compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; + #address-cells = <1>; + #size-cells = <0>; }; };
The hub and the ethernet in its port 1 are hardwired on the board. Compared to the adapters that can be plugged into the USB ports, this one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi has the MAC address for this adapter in its ROM, accessible from its firmware. U-Boot can read out the address and set the local-mac-address property of the node with "ethernet" alias. Let's add the node so that U-Boot can do its business. Model B rev2 and Model B+ entries were verified by me, the hierarchy and pid/vid pair for the Version 2 was provided by Peter Chen. Original Model B is a blind short, though very likely correct. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v3: - Include the ethernet alias in 9514 dtsi too Changes since v2: - Removed leading zeroes in vendor name and reg - Split the common files in separate includes per model Changes since v1: - s/@01/@1/ for ethernet and the hub - Corrected the vid/pid pairs for hub and ethernet - Added Model B rev2 and version 2 board changes - Fixed a missing semicolon typo arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 1 + arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 + arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 1 + arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/bcm283x.dtsi | 2 ++ 7 files changed, 45 insertions(+) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi create mode 100644 arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi