diff mbox

gpio-ep93xx: convert to platform_driver and use basic_mmio_gpio library

Message ID 201106081435.33578.hartleys@visionengravers.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hartley Sweeten June 8, 2011, 9:35 p.m. UTC
This converts the gpio-ep93xx driver into a platform_driver and uses
the basic_mmio_gpio library.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Grant Likely <grant.likely@secretlab.ca>

---

Comments

Grant Likely June 8, 2011, 10:07 p.m. UTC | #1
On Wed, Jun 08, 2011 at 02:35:33PM -0700, H Hartley Sweeten wrote:
> This converts the gpio-ep93xx driver into a platform_driver and uses
> the basic_mmio_gpio library.
> 
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <ryan@bluewatersys.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>

Merged, thanks.

g.

> 
> ---
> 
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index cc9f1d4..1280046 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = {
>  /*************************************************************************
>   * EP93xx IRQ handling
>   *************************************************************************/
> -extern void ep93xx_gpio_init_irq(void);
> -
>  void __init ep93xx_init_irq(void)
>  {
>  	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
>  	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
> -
> -	ep93xx_gpio_init_irq();
>  }
>  
>  
> @@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void)
>  }
>  
>  /*************************************************************************
> + * EP93xx GPIO
> + *************************************************************************/
> +static struct resource ep93xx_gpio_resource[] = {
> +	{
> +		.start		= EP93XX_GPIO_PHYS_BASE,
> +		.end		= EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
> +		.flags		= IORESOURCE_MEM,
> +	},
> +};
> +
> +static struct platform_device ep93xx_gpio_device = {
> +	.name		= "gpio-ep93xx",
> +	.id		= -1,
> +	.num_resources	= ARRAY_SIZE(ep93xx_gpio_resource),
> +	.resource	= ep93xx_gpio_resource,
> +};
> +
> +/*************************************************************************
>   * EP93xx peripheral handling
>   *************************************************************************/
>  #define EP93XX_UART_MCR_OFFSET		(0x0100)
> @@ -870,14 +884,13 @@ void __init ep93xx_register_ac97(void)
>  	platform_device_register(&ep93xx_pcm_device);
>  }
>  
> -extern void ep93xx_gpio_init(void);
> -
>  void __init ep93xx_init_devices(void)
>  {
>  	/* Disallow access to MaverickCrunch initially */
>  	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
>  
> -	ep93xx_gpio_init();
> +	/* Get the GPIO working early, other devices need it */
> +	platform_device_register(&ep93xx_gpio_device);
>  
>  	amba_device_register(&uart1_device, &iomem_resource);
>  	amba_device_register(&uart2_device, &iomem_resource);
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index b84666a..9f06e63 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -87,6 +87,7 @@ config GPIO_IT8761E
>  config GPIO_EP93XX
>  	def_bool y
>  	depends on ARCH_EP93XX
> +	select GPIO_GENERIC
>  
>  config GPIO_EXYNOS4
>  	def_bool y
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
> index 3d427b9..22ffa1d 100644
> --- a/drivers/gpio/gpio-ep93xx.c
> +++ b/drivers/gpio/gpio-ep93xx.c
> @@ -2,6 +2,7 @@
>   * Generic EP93xx GPIO handling
>   *
>   * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
> + * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
>   *
>   * Based on code originally from:
>   *  linux/arch/arm/mach-ep93xx/core.c
> @@ -14,14 +15,20 @@
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>  
>  #include <linux/init.h>
> -#include <linux/module.h>
> -#include <linux/seq_file.h>
> +#include <linux/platform_device.h>
>  #include <linux/io.h>
>  #include <linux/gpio.h>
>  #include <linux/irq.h>
> +#include <linux/slab.h>
> +#include <linux/basic_mmio_gpio.h>
>  
>  #include <mach/hardware.h>
>  
> +struct ep93xx_gpio {
> +	void __iomem		*mmio_base;
> +	struct bgpio_chip	bgc[8];
> +};
> +
>  /*************************************************************************
>   * Interrupt handling for EP93xx on-chip GPIOs
>   *************************************************************************/
> @@ -223,7 +230,7 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
>  	.irq_set_type	= ep93xx_gpio_irq_type,
>  };
>  
> -void __init ep93xx_gpio_init_irq(void)
> +static void ep93xx_gpio_init_irq(void)
>  {
>  	int gpio_irq;
>  
> @@ -258,151 +265,142 @@ void __init ep93xx_gpio_init_irq(void)
>  /*************************************************************************
>   * gpiolib interface for EP93xx on-chip GPIOs
>   *************************************************************************/
> -struct ep93xx_gpio_chip {
> -	struct gpio_chip	chip;
> -
> -	void __iomem		*data_reg;
> -	void __iomem		*data_dir_reg;
> +struct ep93xx_gpio_bank {
> +	const char	*label;
> +	int		data;
> +	int		dir;
> +	int		base;
> +	bool		has_debounce;
>  };
>  
> -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
> +#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce)	\
> +	{							\
> +		.label		= _label,			\
> +		.data		= _data,			\
> +		.dir		= _dir,				\
> +		.base		= _base,			\
> +		.has_debounce	= _debounce,			\
> +	}
>  
> -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
> +static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
> +	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true),
> +	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true),
> +	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false),
> +	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false),
> +	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false),
> +	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true),
> +	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false),
> +	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false),
> +};
> +
> +static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
> +				    unsigned offset, unsigned debounce)
>  {
> -	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
> -	unsigned long flags;
> -	u8 v;
> +	int gpio = chip->base + offset;
> +	int irq = gpio_to_irq(gpio);
>  
> -	local_irq_save(flags);
> -	v = __raw_readb(ep93xx_chip->data_dir_reg);
> -	v &= ~(1 << offset);
> -	__raw_writeb(v, ep93xx_chip->data_dir_reg);
> -	local_irq_restore(flags);
> +	if (irq < 0)
> +		return -EINVAL;
> +
> +	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
>  
>  	return 0;
>  }
>  
> -static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
> -					unsigned offset, int val)
> +static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
> +	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
>  {
> -	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
> -	unsigned long flags;
> -	int line;
> -	u8 v;
> -
> -	local_irq_save(flags);
> +	void __iomem *data = mmio_base + bank->data;
> +	void __iomem *dir =  mmio_base + bank->dir;
> +	int err;
>  
> -	/* Set the value */
> -	v = __raw_readb(ep93xx_chip->data_reg);
> -	if (val)
> -		v |= (1 << offset);
> -	else
> -		v &= ~(1 << offset);
> -	__raw_writeb(v, ep93xx_chip->data_reg);
> -
> -	/* Drive as an output */
> -	line = chip->base + offset;
> -	if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
> -		/* Ports A/B/F */
> -		ep93xx_gpio_int_mask(line);
> -		ep93xx_gpio_update_int_params(line >> 3);
> -	}
> +	err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
> +	if (err)
> +		return err;
>  
> -	v = __raw_readb(ep93xx_chip->data_dir_reg);
> -	v |= (1 << offset);
> -	__raw_writeb(v, ep93xx_chip->data_dir_reg);
> +	bgc->gc.label = bank->label;
> +	bgc->gc.base = bank->base;
>  
> -	local_irq_restore(flags);
> +	if (bank->has_debounce)
> +		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
>  
> -	return 0;
> +	return gpiochip_add(&bgc->gc);
>  }
>  
> -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
> +static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
>  {
> -	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
> +	struct ep93xx_gpio *ep93xx_gpio;
> +	struct resource *res;
> +	void __iomem *mmio;
> +	int i;
> +	int ret;
>  
> -	return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
> -}
> +	ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL);
> +	if (!ep93xx_gpio)
> +		return -ENOMEM;
>  
> -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
> -{
> -	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
> -	unsigned long flags;
> -	u8 v;
> -
> -	local_irq_save(flags);
> -	v = __raw_readb(ep93xx_chip->data_reg);
> -	if (val)
> -		v |= (1 << offset);
> -	else
> -		v &= ~(1 << offset);
> -	__raw_writeb(v, ep93xx_chip->data_reg);
> -	local_irq_restore(flags);
> -}
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		ret = -ENXIO;
> +		goto exit_free;
> +	}
>  
> -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
> -				    unsigned offset, unsigned debounce)
> -{
> -	int gpio = chip->base + offset;
> -	int irq = gpio_to_irq(gpio);
> +	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
> +		ret = -EBUSY;
> +		goto exit_free;
> +	}
>  
> -	if (irq < 0)
> -		return -EINVAL;
> +	mmio = ioremap(res->start, resource_size(res));
> +	if (!mmio) {
> +		ret = -ENXIO;
> +		goto exit_release;
> +	}
> +	ep93xx_gpio->mmio_base = mmio;
>  
> -	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
> +	/* Default all ports to GPIO */
> +	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
> +			       EP93XX_SYSCON_DEVCFG_GONK |
> +			       EP93XX_SYSCON_DEVCFG_EONIDE |
> +			       EP93XX_SYSCON_DEVCFG_GONIDE |
> +			       EP93XX_SYSCON_DEVCFG_HONIDE);
>  
> -	return 0;
> -}
> +	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
> +		struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
> +		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
>  
> -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
> -	{								\
> -		.chip = {						\
> -			.label		  = name,			\
> -			.direction_input  = ep93xx_gpio_direction_input, \
> -			.direction_output = ep93xx_gpio_direction_output, \
> -			.get		  = ep93xx_gpio_get,		\
> -			.set		  = ep93xx_gpio_set,		\
> -			.base		  = base_gpio,			\
> -			.ngpio		  = 8,				\
> -		},							\
> -		.data_reg	= EP93XX_GPIO_REG(dr),			\
> -		.data_dir_reg	= EP93XX_GPIO_REG(ddr),			\
> +		if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank))
> +			dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
> +				bank->label);
>  	}
>  
> -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
> -	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
> -	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
> -	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
> -	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
> -	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
> -	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
> -	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
> -	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
> -};
> +	ep93xx_gpio_init_irq();
>  
> -void __init ep93xx_gpio_init(void)
> -{
> -	int i;
> +	return 0;
>  
> -	/* Set Ports C, D, E, G, and H for GPIO use */
> -	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
> -				 EP93XX_SYSCON_DEVCFG_GONK |
> -				 EP93XX_SYSCON_DEVCFG_EONIDE |
> -				 EP93XX_SYSCON_DEVCFG_GONIDE |
> -				 EP93XX_SYSCON_DEVCFG_HONIDE);
> +exit_release:
> +	release_mem_region(res->start, resource_size(res));
> +exit_free:
> +	kfree(ep93xx_gpio);
> +	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret);
> +	return ret;
> +}
>  
> -	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
> -		struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
> -
> -		/*
> -		 * Ports A, B, and F support input debouncing when
> -		 * used as interrupts.
> -		 */
> -		if (!strcmp(chip->label, "A") ||
> -		    !strcmp(chip->label, "B") ||
> -		    !strcmp(chip->label, "F"))
> -			chip->set_debounce = ep93xx_gpio_set_debounce;
> -
> -		gpiochip_add(chip);
> -	}
> +static struct platform_driver ep93xx_gpio_driver = {
> +	.driver		= {
> +		.name	= "gpio-ep93xx",
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= ep93xx_gpio_probe,
> +};
> +
> +static int __init ep93xx_gpio_init(void)
> +{
> +	pr_info("%s\n", __func__);
> +        return platform_driver_register(&ep93xx_gpio_driver);
>  }
> +postcore_initcall(ep93xx_gpio_init);
> +
> +MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> "
> +		"H Hartley Sweeten <hsweeten@visionengravers.com>");
> +MODULE_DESCRIPTION("EP93XX GPIO driver");
> +MODULE_LICENSE("GPL");
Hartley Sweeten June 9, 2011, 4:43 p.m. UTC | #2
On Wednesday, June 08, 2011 3:08 PM, Grant Likely wrote:
>
> Merged, thanks.

Thanks.  I just noticed I left in a debug message I added when changing
this to a platform_driver.

>> +static int __init ep93xx_gpio_init(void)
>> +{
>> +	pr_info("%s\n", __func__);
>> +	return platform_driver_register(&ep93xx_gpio_driver);
>>  }

That pr_info shouldn't be there.  It just adds noise.

Would you prefer a full new patch or just an incremental patch to remove
this line?  The patch is already in next-20110609.

Thanks, sorry for the trouble.

Regards,
Hartley
Grant Likely June 9, 2011, 6:42 p.m. UTC | #3
On Thu, Jun 9, 2011 at 10:43 AM, H Hartley Sweeten
<hartleys@visionengravers.com> wrote:
> On Wednesday, June 08, 2011 3:08 PM, Grant Likely wrote:
>>
>> Merged, thanks.
>
> Thanks.  I just noticed I left in a debug message I added when changing
> this to a platform_driver.
>
>>> +static int __init ep93xx_gpio_init(void)
>>> +{
>>> +    pr_info("%s\n", __func__);
>>> +    return platform_driver_register(&ep93xx_gpio_driver);
>>>  }
>
> That pr_info shouldn't be there.  It just adds noise.
>
> Would you prefer a full new patch or just an incremental patch to remove
> this line?  The patch is already in next-20110609.
>
> Thanks, sorry for the trouble

Neither.  I just fixed it up and pushed out a commit.

g.
Hartley Sweeten June 9, 2011, 6:44 p.m. UTC | #4
On Thursday, June 09, 2011 11:42 AM, Grant Likely wrote:
> On Thu, Jun 9, 2011 at 10:43 AM, H Hartley Sweeten wrote:
>> On Wednesday, June 08, 2011 3:08 PM, Grant Likely wrote:
>>>
>>> Merged, thanks.
>>
>> Thanks.  I just noticed I left in a debug message I added when changing
>> this to a platform_driver.
>>
>>>> +static int __init ep93xx_gpio_init(void)
>>>> +{
>>>> +    pr_info("%s\n", __func__);
>>>> +    return platform_driver_register(&ep93xx_gpio_driver);
>>>>  }
>>
>> That pr_info shouldn't be there.  It just adds noise.
>>
>> Would you prefer a full new patch or just an incremental patch to remove
>> this line?  The patch is already in next-20110609.
>>
>> Thanks, sorry for the trouble
>
> Neither.  I just fixed it up and pushed out a commit.

Thanks!

Regards,
Hartley
diff mbox

Patch

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index cc9f1d4..1280046 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -174,14 +174,10 @@  struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-extern void ep93xx_gpio_init_irq(void);
-
 void __init ep93xx_init_irq(void)
 {
 	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
 	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-
-	ep93xx_gpio_init_irq();
 }
 
 
@@ -241,6 +237,24 @@  unsigned int ep93xx_chip_revision(void)
 }
 
 /*************************************************************************
+ * EP93xx GPIO
+ *************************************************************************/
+static struct resource ep93xx_gpio_resource[] = {
+	{
+		.start		= EP93XX_GPIO_PHYS_BASE,
+		.end		= EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_gpio_device = {
+	.name		= "gpio-ep93xx",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_gpio_resource),
+	.resource	= ep93xx_gpio_resource,
+};
+
+/*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
 #define EP93XX_UART_MCR_OFFSET		(0x0100)
@@ -870,14 +884,13 @@  void __init ep93xx_register_ac97(void)
 	platform_device_register(&ep93xx_pcm_device);
 }
 
-extern void ep93xx_gpio_init(void);
-
 void __init ep93xx_init_devices(void)
 {
 	/* Disallow access to MaverickCrunch initially */
 	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
-	ep93xx_gpio_init();
+	/* Get the GPIO working early, other devices need it */
+	platform_device_register(&ep93xx_gpio_device);
 
 	amba_device_register(&uart1_device, &iomem_resource);
 	amba_device_register(&uart2_device, &iomem_resource);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b84666a..9f06e63 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -87,6 +87,7 @@  config GPIO_IT8761E
 config GPIO_EP93XX
 	def_bool y
 	depends on ARCH_EP93XX
+	select GPIO_GENERIC
 
 config GPIO_EXYNOS4
 	def_bool y
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 3d427b9..22ffa1d 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -2,6 +2,7 @@ 
  * Generic EP93xx GPIO handling
  *
  * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
+ * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
  *
  * Based on code originally from:
  *  linux/arch/arm/mach-ep93xx/core.c
@@ -14,14 +15,20 @@ 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/seq_file.h>
+#include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/basic_mmio_gpio.h>
 
 #include <mach/hardware.h>
 
+struct ep93xx_gpio {
+	void __iomem		*mmio_base;
+	struct bgpio_chip	bgc[8];
+};
+
 /*************************************************************************
  * Interrupt handling for EP93xx on-chip GPIOs
  *************************************************************************/
@@ -223,7 +230,7 @@  static struct irq_chip ep93xx_gpio_irq_chip = {
 	.irq_set_type	= ep93xx_gpio_irq_type,
 };
 
-void __init ep93xx_gpio_init_irq(void)
+static void ep93xx_gpio_init_irq(void)
 {
 	int gpio_irq;
 
@@ -258,151 +265,142 @@  void __init ep93xx_gpio_init_irq(void)
 /*************************************************************************
  * gpiolib interface for EP93xx on-chip GPIOs
  *************************************************************************/
-struct ep93xx_gpio_chip {
-	struct gpio_chip	chip;
-
-	void __iomem		*data_reg;
-	void __iomem		*data_dir_reg;
+struct ep93xx_gpio_bank {
+	const char	*label;
+	int		data;
+	int		dir;
+	int		base;
+	bool		has_debounce;
 };
 
-#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
+#define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce)	\
+	{							\
+		.label		= _label,			\
+		.data		= _data,			\
+		.dir		= _dir,				\
+		.base		= _base,			\
+		.has_debounce	= _debounce,			\
+	}
 
-static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
+	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true),
+	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true),
+	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false),
+	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false),
+	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false),
+	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true),
+	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false),
+	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false),
+};
+
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+				    unsigned offset, unsigned debounce)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	u8 v;
+	int gpio = chip->base + offset;
+	int irq = gpio_to_irq(gpio);
 
-	local_irq_save(flags);
-	v = __raw_readb(ep93xx_chip->data_dir_reg);
-	v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_dir_reg);
-	local_irq_restore(flags);
+	if (irq < 0)
+		return -EINVAL;
+
+	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
 
 	return 0;
 }
 
-static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int val)
+static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
+	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	int line;
-	u8 v;
-
-	local_irq_save(flags);
+	void __iomem *data = mmio_base + bank->data;
+	void __iomem *dir =  mmio_base + bank->dir;
+	int err;
 
-	/* Set the value */
-	v = __raw_readb(ep93xx_chip->data_reg);
-	if (val)
-		v |= (1 << offset);
-	else
-		v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_reg);
-
-	/* Drive as an output */
-	line = chip->base + offset;
-	if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
-		/* Ports A/B/F */
-		ep93xx_gpio_int_mask(line);
-		ep93xx_gpio_update_int_params(line >> 3);
-	}
+	err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
+	if (err)
+		return err;
 
-	v = __raw_readb(ep93xx_chip->data_dir_reg);
-	v |= (1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_dir_reg);
+	bgc->gc.label = bank->label;
+	bgc->gc.base = bank->base;
 
-	local_irq_restore(flags);
+	if (bank->has_debounce)
+		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
 
-	return 0;
+	return gpiochip_add(&bgc->gc);
 }
 
-static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
 {
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	struct ep93xx_gpio *ep93xx_gpio;
+	struct resource *res;
+	void __iomem *mmio;
+	int i;
+	int ret;
 
-	return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
-}
+	ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL);
+	if (!ep93xx_gpio)
+		return -ENOMEM;
 
-static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	unsigned long flags;
-	u8 v;
-
-	local_irq_save(flags);
-	v = __raw_readb(ep93xx_chip->data_reg);
-	if (val)
-		v |= (1 << offset);
-	else
-		v &= ~(1 << offset);
-	__raw_writeb(v, ep93xx_chip->data_reg);
-	local_irq_restore(flags);
-}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENXIO;
+		goto exit_free;
+	}
 
-static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
-				    unsigned offset, unsigned debounce)
-{
-	int gpio = chip->base + offset;
-	int irq = gpio_to_irq(gpio);
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		ret = -EBUSY;
+		goto exit_free;
+	}
 
-	if (irq < 0)
-		return -EINVAL;
+	mmio = ioremap(res->start, resource_size(res));
+	if (!mmio) {
+		ret = -ENXIO;
+		goto exit_release;
+	}
+	ep93xx_gpio->mmio_base = mmio;
 
-	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+	/* Default all ports to GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK |
+			       EP93XX_SYSCON_DEVCFG_EONIDE |
+			       EP93XX_SYSCON_DEVCFG_GONIDE |
+			       EP93XX_SYSCON_DEVCFG_HONIDE);
 
-	return 0;
-}
+	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+		struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
+		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
 
-#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = ep93xx_gpio_direction_input, \
-			.direction_output = ep93xx_gpio_direction_output, \
-			.get		  = ep93xx_gpio_get,		\
-			.set		  = ep93xx_gpio_set,		\
-			.base		  = base_gpio,			\
-			.ngpio		  = 8,				\
-		},							\
-		.data_reg	= EP93XX_GPIO_REG(dr),			\
-		.data_dir_reg	= EP93XX_GPIO_REG(ddr),			\
+		if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank))
+			dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
+				bank->label);
 	}
 
-static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
-	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
-	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
-	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
-	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
-	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
-	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
-	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
-	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
-};
+	ep93xx_gpio_init_irq();
 
-void __init ep93xx_gpio_init(void)
-{
-	int i;
+	return 0;
 
-	/* Set Ports C, D, E, G, and H for GPIO use */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK |
-				 EP93XX_SYSCON_DEVCFG_EONIDE |
-				 EP93XX_SYSCON_DEVCFG_GONIDE |
-				 EP93XX_SYSCON_DEVCFG_HONIDE);
+exit_release:
+	release_mem_region(res->start, resource_size(res));
+exit_free:
+	kfree(ep93xx_gpio);
+	dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret);
+	return ret;
+}
 
-	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
-		struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
-
-		/*
-		 * Ports A, B, and F support input debouncing when
-		 * used as interrupts.
-		 */
-		if (!strcmp(chip->label, "A") ||
-		    !strcmp(chip->label, "B") ||
-		    !strcmp(chip->label, "F"))
-			chip->set_debounce = ep93xx_gpio_set_debounce;
-
-		gpiochip_add(chip);
-	}
+static struct platform_driver ep93xx_gpio_driver = {
+	.driver		= {
+		.name	= "gpio-ep93xx",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ep93xx_gpio_probe,
+};
+
+static int __init ep93xx_gpio_init(void)
+{
+	pr_info("%s\n", __func__);
+        return platform_driver_register(&ep93xx_gpio_driver);
 }
+postcore_initcall(ep93xx_gpio_init);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> "
+		"H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93XX GPIO driver");
+MODULE_LICENSE("GPL");