| Message ID | 1462451666-17945-12-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hello Krzysztof, On 05/05/2016 08:34 AM, Krzysztof Kozlowski wrote: > Parse usb-pwrseq property from Device Tree to get the phandle to pwrseq > device. The pwrseq device will be used by USB hub to cycle the power > before activating ports. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- [snip] > > @@ -532,6 +534,14 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) > return retval; > } > > + port_dev->dev.of_node = usb_of_get_child_node(hub->hdev->dev.of_node, port1); > + port_dev->pwrseq = pwrseq_alloc(&port_dev->dev); > + if (IS_ERR(port_dev->pwrseq)) { > + device_unregister(&port_dev->dev); > + /* TODO: what about EPROBE_DEFER? */ I think it's OK since the call chain is: hub_probe() hub_configure() usb_hub_create_port_device() so the hub_probe() will be deferred if the usb-pwrseq was not registered yet. Unless I misunderstood your question :) Anyway, patch looks good to me: Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Best regards,
On 05/05/2016 10:10 PM, Javier Martinez Canillas wrote: > Hello Krzysztof, > > On 05/05/2016 08:34 AM, Krzysztof Kozlowski wrote: >> Parse usb-pwrseq property from Device Tree to get the phandle to pwrseq >> device. The pwrseq device will be used by USB hub to cycle the power >> before activating ports. >> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> --- > > [snip] > >> >> @@ -532,6 +534,14 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) >> return retval; >> } >> >> + port_dev->dev.of_node = usb_of_get_child_node(hub->hdev->dev.of_node, port1); >> + port_dev->pwrseq = pwrseq_alloc(&port_dev->dev); >> + if (IS_ERR(port_dev->pwrseq)) { >> + device_unregister(&port_dev->dev); >> + /* TODO: what about EPROBE_DEFER? */ > > I think it's OK since the call chain is: > > hub_probe() > hub_configure() > usb_hub_create_port_device() > > so the hub_probe() will be deferred if the usb-pwrseq was not registered yet. > Unless I misunderstood your question :) > > Anyway, patch looks good to me: > > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Yes and deferred probing works in my case. That is an older comment actually. Thanks for review, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 34c1a7e22aae..68ca89780d26 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -24,6 +24,8 @@ #include <linux/usb/hcd.h> #include "usb.h" +struct pwrseq; + struct usb_hub { struct device *intfdev; /* the "interface" device */ struct usb_device *hdev; @@ -101,6 +103,7 @@ struct usb_port { struct usb_dev_state *port_owner; struct usb_port *peer; struct dev_pm_qos_request *req; + struct pwrseq *pwrseq; enum usb_port_connect_type connect_type; usb_port_location_t location; struct mutex status_lock; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 14718a9ffcfb..a875bd342452 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -18,6 +18,8 @@ #include <linux/slab.h> #include <linux/pm_qos.h> +#include <linux/pwrseq.h> +#include <linux/usb/of.h> #include "hub.h" @@ -532,6 +534,14 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) return retval; } + port_dev->dev.of_node = usb_of_get_child_node(hub->hdev->dev.of_node, port1); + port_dev->pwrseq = pwrseq_alloc(&port_dev->dev); + if (IS_ERR(port_dev->pwrseq)) { + device_unregister(&port_dev->dev); + /* TODO: what about EPROBE_DEFER? */ + return PTR_ERR(port_dev->pwrseq); + } + find_and_link_peer(hub, port1); /* @@ -573,8 +583,13 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1) struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_port *peer; + pwrseq_power_off(port_dev->pwrseq); + peer = port_dev->peer; if (peer) unlink_peers(port_dev, peer); + + pwrseq_free(port_dev->pwrseq); + port_dev->pwrseq = NULL; device_unregister(&port_dev->dev); }
Parse usb-pwrseq property from Device Tree to get the phandle to pwrseq device. The pwrseq device will be used by USB hub to cycle the power before activating ports. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- drivers/usb/core/hub.h | 3 +++ drivers/usb/core/port.c | 15 +++++++++++++++ 2 files changed, 18 insertions(+)