| Message ID | 1463145186-12906-2-git-send-email-kernel@martin.sperl.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, May 13, 2016 at 01:13:02PM +0000, kernel@martin.sperl.org wrote: > From: Martin Sperl <kernel@martin.sperl.org> > > Add documentation for bcm2835 SOC thermal sensor. > > Signed-off-by: Martin Sperl <kernel@martin.sperl.org> > Acked-by: Eric Anholt <eric@anholt.net> > > Changelog: > V1 -> V2: renamed file to follow naming conventions > --- > .../bindings/thermal/brcm,bcm2835-thermal.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt > new file mode 100644 > index 0000000..09de164 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt > @@ -0,0 +1,17 @@ > +Binding for Thermal Sensor driver for BCM2835 SoCs. > + > +Required parameters: > +------------------- > + > +compatible: should be one of: "brcm,bcm2835-thermal", > + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" > +reg: Address range of the thermal registers. > +clocks: Phandle of the clock used by the thermal sensor. > + > +Example: > + > +thermal: thermal@0x7e212000 { Drop the '0x'. Otherwise, Acked-by: Rob Herring <robh@kernel.org> > + compatible = "brcm,bcm2835-thermal"; > + reg = <0x7e212000 0x8>; > + clocks = <&clocks BCM2835_CLOCK_TSENS>; > +}; > -- > 2.1.4
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt new file mode 100644 index 0000000..09de164 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -0,0 +1,17 @@ +Binding for Thermal Sensor driver for BCM2835 SoCs. + +Required parameters: +------------------- + +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. + +Example: + +thermal: thermal@0x7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; +};