@@ -195,6 +195,15 @@ config IMX_THERMAL
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
+config QORIQ_THERMAL
+ tristate "QorIQ Thermal Monitoring Unit"
+ depends on THERMAL_OF
+ help
+ Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
+ It supports one critical trip point and one passive trip point. The
+ cpufreq is used as the cooling device to throttle CPUs when the
+ passive trip is crossed.
+
config SPEAR_THERMAL
tristate "SPEAr thermal sensor driver"
depends on PLAT_SPEAR || COMPILE_TEST
@@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
+obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
new file mode 100644
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define SITES_MAX 16
+
+/*
+ * QorIQ TMU Registers
+ */
+struct qoriq_tmu_site_regs {
+ u32 tritsr; /* Immediate Temperature Site Register */
+ u32 tratsr; /* Average Temperature Site Register */
+ u8 res0[0x8];
+};
+
+struct qoriq_tmu_regs {
+ u32 tmr; /* Mode Register */
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+ u32 tsr; /* Status Register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+#define TMTMIR_DEFAULT 0x0000000f
+ u8 res0[0x14];
+ u32 tier; /* Interrupt Enable Register */
+#define TIER_DISABLE 0x0
+ u32 tidr; /* Interrupt Detect Register */
+ u32 tiscr; /* Interrupt Site Capture Register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u8 res1[0x10];
+ u32 tmhtcrh; /* High Temperature Capture Register */
+ u32 tmhtcrl; /* Low Temperature Capture Register */
+ u8 res2[0x8];
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u8 res3[0x24];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res4[0x78];
+ struct qoriq_tmu_site_regs site[SITES_MAX];
+ u8 res5[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res6[0x310];
+ u32 ttr0cr; /* Temperature Range 0 Control Register */
+ u32 ttr1cr; /* Temperature Range 1 Control Register */
+ u32 ttr2cr; /* Temperature Range 2 Control Register */
+ u32 ttr3cr; /* Temperature Range 3 Control Register */
+};
+
+/*
+ * Thermal zone data
+ */
+struct qoriq_tmu_data {
+ struct thermal_zone_device *tz;
+ struct qoriq_tmu_regs __iomem *regs;
+ int sensor_id;
+ bool little_endian;
+};
+
+static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
+{
+ if (p->little_endian)
+ iowrite32(val, addr);
+ else
+ iowrite32be(val, addr);
+}
+
+static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
+{
+ if (p->little_endian)
+ return ioread32(addr);
+ else
+ return ioread32be(addr);
+}
+
+static int tmu_get_temp(void *p, int *temp)
+{
+ u32 val;
+ struct qoriq_tmu_data *data = p;
+
+ val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
+ *temp = (val & 0xff) * 1000;
+
+ return 0;
+}
+
+static int qoriq_tmu_get_sensor_id(void)
+{
+ int ret, id;
+ struct of_phandle_args sensor_specs;
+ struct device_node *np, *sensor_np;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np)
+ return -ENODEV;
+
+ sensor_np = of_get_next_child(np, NULL);
+ ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, &sensor_specs);
+ if (ret) {
+ of_node_put(np);
+ of_node_put(sensor_np);
+ return ret;
+ }
+
+ if (sensor_specs.args_count >= 1) {
+ id = sensor_specs.args[0];
+ WARN(sensor_specs.args_count > 1,
+ "%s: too many cells in sensor specifier %d\n",
+ sensor_specs.np->name, sensor_specs.args_count);
+ } else {
+ id = 0;
+ }
+
+ of_node_put(np);
+ of_node_put(sensor_np);
+
+ return id;
+}
+
+static int qoriq_tmu_calibration(struct platform_device *pdev)
+{
+ int i, val, len;
+ u32 range[4];
+ const u32 *calibration;
+ struct device_node *np = pdev->dev.of_node;
+ struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+
+ if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
+ dev_err(&pdev->dev, "missing calibration range.\n");
+ return -ENODEV;
+ }
+
+ /* Init temperature range registers */
+ tmu_write(data, range[0], &data->regs->ttr0cr);
+ tmu_write(data, range[1], &data->regs->ttr1cr);
+ tmu_write(data, range[2], &data->regs->ttr2cr);
+ tmu_write(data, range[3], &data->regs->ttr3cr);
+
+ calibration = of_get_property(np, "fsl,tmu-calibration", &len);
+ if (calibration == NULL || len % 8) {
+ dev_err(&pdev->dev, "invalid calibration data.\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < len; i += 8, calibration += 2) {
+ val = of_read_number(calibration, 1);
+ tmu_write(data, val, &data->regs->ttcfgr);
+ val = of_read_number(calibration + 1, 1);
+ tmu_write(data, val, &data->regs->tscfgr);
+ }
+
+ return 0;
+}
+
+static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
+{
+ /* Disable interrupt, using polling instead */
+ tmu_write(data, TIER_DISABLE, &data->regs->tier);
+
+ /* Set update_interval */
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+
+ /* Disable monitoring */
+ tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+}
+
+static struct thermal_zone_of_device_ops tmu_tz_ops = {
+ .get_temp = tmu_get_temp,
+};
+
+static int qoriq_tmu_probe(struct platform_device *pdev)
+{
+ int ret;
+ const struct thermal_trip *trip;
+ struct qoriq_tmu_data *data;
+ struct device_node *np = pdev->dev.of_node;
+ u32 site = 0;
+
+ if (!np) {
+ dev_err(&pdev->dev, "Device OF-Node is NULL");
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+
+ data->little_endian = of_property_read_bool(np, "little-endian");
+
+ data->sensor_id = qoriq_tmu_get_sensor_id();
+ if (data->sensor_id < 0) {
+ dev_err(&pdev->dev, "Failed to get sensor id\n");
+ ret = -ENODEV;
+ goto err_iomap;
+ }
+
+ data->regs = of_iomap(np, 0);
+ if (!data->regs) {
+ dev_err(&pdev->dev, "Failed to get memory region\n");
+ ret = -ENODEV;
+ goto err_iomap;
+ }
+
+ qoriq_tmu_init_device(data); /* TMU initialization */
+
+ ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
+ if (ret < 0)
+ goto err_tmu;
+
+ data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id,
+ data, &tmu_tz_ops);
+ if (IS_ERR(data->tz)) {
+ ret = PTR_ERR(data->tz);
+ dev_err(&pdev->dev,
+ "Failed to register thermal zone device %d\n", ret);
+ goto err_tmu;
+ }
+
+ trip = of_thermal_get_trip_points(data->tz);
+
+ /* Enable monitoring */
+ site |= 0x1 << (15 - data->sensor_id);
+ tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
+
+ return 0;
+
+err_tmu:
+ iounmap(data->regs);
+
+err_iomap:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int qoriq_tmu_remove(struct platform_device *pdev)
+{
+ struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+
+ thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
+
+ /* Disable monitoring */
+ tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+
+ iounmap(data->regs);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qoriq_tmu_suspend(struct device *dev)
+{
+ u32 tmr;
+ struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+ /* Disable monitoring */
+ tmr = tmu_read(data, &data->regs->tmr);
+ tmr &= ~TMR_ME;
+ tmu_write(data, tmr, &data->regs->tmr);
+
+ return 0;
+}
+
+static int qoriq_tmu_resume(struct device *dev)
+{
+ u32 tmr;
+ struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+ /* Enable monitoring */
+ tmr = tmu_read(data, &data->regs->tmr);
+ tmr |= TMR_ME;
+ tmu_write(data, tmr, &data->regs->tmr);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
+ qoriq_tmu_suspend, qoriq_tmu_resume);
+
+static const struct of_device_id qoriq_tmu_match[] = {
+ { .compatible = "fsl,qoriq-tmu", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
+
+static struct platform_driver qoriq_tmu = {
+ .driver = {
+ .name = "qoriq_thermal",
+ .pm = &qoriq_tmu_pm_ops,
+ .of_match_table = qoriq_tmu_match,
+ },
+ .probe = qoriq_tmu_probe,
+ .remove = qoriq_tmu_remove,
+};
+module_platform_driver(qoriq_tmu);
+
+MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>");
+MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver");
+MODULE_LICENSE("GPL v2");
This driver add thermal management support by enabling TMU (Thermal Monitoring Unit) on QorIQ platform. It's based on thermal of framework: - Trip points defined in device tree. - Cpufreq as cooling device registered in qoriq cpufreq driver. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> --- drivers/thermal/Kconfig | 9 ++ drivers/thermal/Makefile | 1 + drivers/thermal/qoriq_thermal.c | 328 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 338 insertions(+) create mode 100644 drivers/thermal/qoriq_thermal.c