@@ -14,6 +14,7 @@
#include <linux/component.h>
#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -35,11 +36,12 @@
#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
-/* dp grf register offset */
-#define GRF_SOC_CON6 0x025c
-#define GRF_EDP_LCD_SEL_MASK BIT(5)
-#define GRF_EDP_SEL_VOP_LIT BIT(5)
-#define GRF_EDP_SEL_VOP_BIG 0
+struct rockchip_dp_chip_data {
+ u32 lcdsel_grf_reg;
+ u32 lcdsel_big;
+ u32 lcdsel_lit;
+ u32 lcdsel_mask;
+};
struct rockchip_dp_device {
struct drm_device *drm_dev;
@@ -51,6 +53,8 @@ struct rockchip_dp_device {
struct regmap *grf;
struct reset_control *rst;
+ const struct rockchip_dp_chip_data *data;
+
struct analogix_dp_plat_data plat_data;
};
@@ -119,13 +123,13 @@ static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
return;
if (ret)
- val = GRF_EDP_SEL_VOP_LIT | (GRF_EDP_LCD_SEL_MASK << 16);
+ val = dp->data->lcdsel_lit | dp->data->lcdsel_mask;
else
- val = GRF_EDP_SEL_VOP_BIG | (GRF_EDP_LCD_SEL_MASK << 16);
+ val = dp->data->lcdsel_big | dp->data->lcdsel_mask;
dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
- ret = regmap_write(dp->grf, GRF_SOC_CON6, val);
+ ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
if (ret != 0) {
dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
return;
@@ -246,6 +250,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
void *data)
{
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+ const struct rockchip_dp_chip_data *dp_data;
struct drm_device *drm_dev = data;
int ret;
@@ -256,10 +261,15 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
*/
dev_set_drvdata(dev, NULL);
+ dp_data = of_device_get_match_data(dev);
+ if (!dp_data)
+ return -ENODEV;
+
ret = rockchip_dp_init(dp);
if (ret < 0)
return ret;
+ dp->data = dp_data;
dp->drm_dev = drm_dev;
ret = rockchip_dp_drm_create_encoder(dp);
@@ -365,8 +375,15 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
};
+static const struct rockchip_dp_chip_data rk3288_dp = {
+ .lcdsel_grf_reg = 0x025c,
+ .lcdsel_big = 0,
+ .lcdsel_lit = BIT(5),
+ .lcdsel_mask = BIT(21),
+};
+
static const struct of_device_id rockchip_dp_dt_ids[] = {
- {.compatible = "rockchip,rk3288-dp",},
+ {.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
eDP controller need to declare which vop provide the video source, and it's defined in GRF registers. But different chips have different GRF register address, so we need to create a device data to declare the GRF messages for each chips. Signed-off-by: Yakir Yang <ykk@rock-chips.com> --- Changes in v2: None drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 35 ++++++++++++++++++------- 1 file changed, 26 insertions(+), 9 deletions(-)