| Message ID | 1464179407-9004-1-git-send-email-tjakobi@math.uni-bielefeld.de (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Ping! - Tobias Tobias Jakobi wrote: > The current bitwise AND should result in the same assembler > but this is what the code is actually supposed to do. > > Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> > --- > drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c > index b3f3c2c..e4a1a63 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, > state->v_ratio == (1 << 15)) > height_ok = true; > > - if (width_ok & height_ok) > + if (width_ok && height_ok) > return 0; > > DRM_DEBUG_KMS("scaling mode is not supported"); > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, May 25, 2016 at 02:30:07PM +0200, Tobias Jakobi wrote: > The current bitwise AND should result in the same assembler > but this is what the code is actually supposed to do. > > Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> > --- > drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c > index b3f3c2c..e4a1a63 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, > state->v_ratio == (1 << 15)) > height_ok = true; > > - if (width_ok & height_ok) > + if (width_ok && height_ok) > return 0; > > DRM_DEBUG_KMS("scaling mode is not supported"); > -- > 2.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 10, 2016 at 11:54:50AM +0100, Eric Engestrom wrote: > On Wed, May 25, 2016 at 02:30:07PM +0200, Tobias Jakobi wrote: > > The current bitwise AND should result in the same assembler > > but this is what the code is actually supposed to do. > > > > Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> > > Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Applied to drm-misc, thanks. -Daniel > > > --- > > drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c > > index b3f3c2c..e4a1a63 100644 > > --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c > > +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c > > @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, > > state->v_ratio == (1 << 15)) > > height_ok = true; > > > > - if (width_ok & height_ok) > > + if (width_ok && height_ok) > > return 0; > > > > DRM_DEBUG_KMS("scaling mode is not supported"); > > -- > > 2.7.3 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Picked it up. Thanks, Inki Dae 2016년 06월 10일 19:12에 Tobias Jakobi 이(가) 쓴 글: > Ping! > > - Tobias > > Tobias Jakobi wrote: >> The current bitwise AND should result in the same assembler >> but this is what the code is actually supposed to do. >> >> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> >> --- >> drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c >> index b3f3c2c..e4a1a63 100644 >> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c >> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c >> @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, >> state->v_ratio == (1 << 15)) >> height_ok = true; >> >> - if (width_ok & height_ok) >> + if (width_ok && height_ok) >> return 0; >> >> DRM_DEBUG_KMS("scaling mode is not supported"); >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 13, 2016 at 3:34 AM, Inki Dae <inki.dae@samsung.com> wrote: > Picked it up. Fyi it's already in drm-misc too. -Daniel > > Thanks, > Inki Dae > > 2016년 06월 10일 19:12에 Tobias Jakobi 이(가) 쓴 글: >> Ping! >> >> - Tobias >> >> Tobias Jakobi wrote: >>> The current bitwise AND should result in the same assembler >>> but this is what the code is actually supposed to do. >>> >>> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> >>> --- >>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> index b3f3c2c..e4a1a63 100644 >>> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c >>> @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, >>> state->v_ratio == (1 << 15)) >>> height_ok = true; >>> >>> - if (width_ok & height_ok) >>> + if (width_ok && height_ok) >>> return 0; >>> >>> DRM_DEBUG_KMS("scaling mode is not supported"); >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index b3f3c2c..e4a1a63 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -226,7 +226,7 @@ exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, state->v_ratio == (1 << 15)) height_ok = true; - if (width_ok & height_ok) + if (width_ok && height_ok) return 0; DRM_DEBUG_KMS("scaling mode is not supported");
The current bitwise AND should result in the same assembler but this is what the code is actually supposed to do. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)