@@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
{
struct sun4i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div, timeout;
+ unsigned int start, end, tx_time;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
@@ -279,9 +280,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
+ tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+ start = jiffies;
timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(tx_time));
+ end = jiffies;
if (!timeout) {
+ dev_warn(&master->dev,
+ "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+ dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+ jiffies_to_msecs(end - start), tx_time);
ret = -ETIMEDOUT;
goto out;
}
@@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
{
struct sun6i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div, timeout;
+ unsigned int start, end, tx_time;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
@@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
+ tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+ start = jiffies;
timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(tx_time));
+ end = jiffies;
if (!timeout) {
+ dev_warn(&master->dev,
+ "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+ dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+ jiffies_to_msecs(end - start), tx_time);
ret = -ETIMEDOUT;
goto out;
}
The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek <hramrach@gmail.com> --- v2: - fix build error - use unsigned instead of int in max_t - use tfr->speed_hz instead of sspi->max_speed_hz - commit 47284e3e0f3c427c93f8583549b6c938e8a18015 changes the driver to use tfr->speed_hz v3: - avoid max_t by using unsigned constant --- drivers/spi/spi-sun4i.c | 10 +++++++++- drivers/spi/spi-sun6i.c | 10 +++++++++- 2 files changed, 18 insertions(+), 2 deletions(-)