| Message ID | 1464979306-2771-1-git-send-email-aduggan@synaptics.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi,
[auto build test ERROR on hid/for-next]
[also build test ERROR on v4.7-rc1 next-20160603]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Andrew-Duggan/HID-rmi-Make-hid-rmi-a-transport-driver-for-synaptics-rmi4/20160604-024428
base: https://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git for-next
config: x86_64-randconfig-s4-06040320 (attached as .config)
compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All errors (new ones prefixed by >>):
>> drivers/hid/hid-rmi.c:572:2: error: unknown field 'dribble' specified in initializer
.dribble = RMI_REG_STATE_OFF,
^
>> drivers/hid/hid-rmi.c:572:13: error: 'RMI_REG_STATE_OFF' undeclared here (not in a function)
.dribble = RMI_REG_STATE_OFF,
^~~~~~~~~~~~~~~~~
>> drivers/hid/hid-rmi.c:573:2: error: unknown field 'palm_detect' specified in initializer
.palm_detect = RMI_REG_STATE_OFF,
^
vim +/dribble +572 drivers/hid/hid-rmi.c
566 return 0;
567 }
568
569 static struct rmi_2d_sensor_platform_data rmi_hid_2d_sensor_data = {
570 .sensor_type = rmi_sensor_touchpad,
571 .axis_align.flip_y = true,
> 572 .dribble = RMI_REG_STATE_OFF,
> 573 .palm_detect = RMI_REG_STATE_OFF,
574 };
575
576 static struct rmi_f30_data rmi_hid_f30_data = {
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Sat, 4 Jun 2016, kbuild test robot wrote: > Hi, > > [auto build test ERROR on hid/for-next] > [also build test ERROR on v4.7-rc1 next-20160603] > [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] > > url: https://github.com/0day-ci/linux/commits/Andrew-Duggan/HID-rmi-Make-hid-rmi-a-transport-driver-for-synaptics-rmi4/20160604-024428 > base: https://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git for-next > config: x86_64-randconfig-s4-06040320 (attached as .config) > compiler: gcc-6 (Debian 6.1.1-1) 6.1.1 20160430 > reproduce: > # save the attached .config to linux build tree > make ARCH=x86_64 > > All errors (new ones prefixed by >>): > > >> drivers/hid/hid-rmi.c:572:2: error: unknown field 'dribble' specified in initializer > .dribble = RMI_REG_STATE_OFF, > ^ > >> drivers/hid/hid-rmi.c:572:13: error: 'RMI_REG_STATE_OFF' undeclared here (not in a function) > .dribble = RMI_REG_STATE_OFF, > ^~~~~~~~~~~~~~~~~ > >> drivers/hid/hid-rmi.c:573:2: error: unknown field 'palm_detect' specified in initializer > .palm_detect = RMI_REG_STATE_OFF, > ^ This patch depends on this series: http://lkml.kernel.org/r/1464979127-2327-1-git-send-email-aduggan@synaptics.com but there is unfortunately no way for your robot to recognize this dependency.
On Fri, 3 Jun 2016, Andrew Duggan wrote: > The Synaptics RMI4 driver provides support for RMI4 devices. Instead of > duplicating the RMI4 processing code, make hid-rmi a transport driver > and register it with the Synaptics RMI4 core. > > Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Is there any update on the Input series please? Thanks,
On Jun 15 2016 or thereabouts, Jiri Kosina wrote: > On Fri, 3 Jun 2016, Andrew Duggan wrote: > > > The Synaptics RMI4 driver provides support for RMI4 devices. Instead of > > duplicating the RMI4 processing code, make hid-rmi a transport driver > > and register it with the Synaptics RMI4 core. > > > > Signed-off-by: Andrew Duggan <aduggan@synaptics.com> > > Is there any update on the Input series please? FWIW, I just reviewed it. Now the ball is in Dmitry's hand (I don't think it needs a resubmission). Cheers, Benjamin > > Thanks, > > -- > Jiri Kosina > SUSE Labs > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Jun 03 2016 or thereabouts, Andrew Duggan wrote: > The Synaptics RMI4 driver provides support for RMI4 devices. Instead of > duplicating the RMI4 processing code, make hid-rmi a transport driver > and register it with the Synaptics RMI4 core. > > Signed-off-by: Andrew Duggan <aduggan@synaptics.com> > --- > Here is the updated version of the hid-rmi patch. This patch along with > the series I just posted for rmi_core, provides all of the functionality > currently present in hid-rmi. This patch does depend on the changes in > the rmi_core patch series to build since it is setting fields in > struct rmi_2d_sensor_platform_data which are added in that series. > I can separate setting those fields into a separate patch if that helps > with integrating between the input and HID trees. > > In addition to the core changes this version also adds a fifo so that > attention reports are stored when the attn worker is processing a report. > > I also changes the Kconfig options since the previous patch. The previous > version just added a dependency on RMI4_CORE. But, if you take a previous > config with HID_RMI set and don't know to set RMI4_CORE, F11, and F30 > users will end up with a touchpad which doesn't work. Don't you need F12 too (for precision touchpads IIRC?). > > Thanks, > Andrew > > drivers/hid/Kconfig | 3 + > drivers/hid/hid-rmi.c | 962 +++++++------------------------------------------- > 2 files changed, 140 insertions(+), 825 deletions(-) > > diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig > index 4117225..0520626 100644 > --- a/drivers/hid/Kconfig > +++ b/drivers/hid/Kconfig > @@ -747,6 +747,9 @@ config HID_SUNPLUS > config HID_RMI > tristate "Synaptics RMI4 device support" > depends on HID > + select RMI4_CORE > + select RMI4_F11 > + select RMI4_F30 > ---help--- > Support for Synaptics RMI4 touchpads. > Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid > diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c > index 9cd2ca3..34ff9a2 100644 > --- a/drivers/hid/hid-rmi.c > +++ b/drivers/hid/hid-rmi.c > @@ -19,6 +19,8 @@ > #include <linux/slab.h> > #include <linux/wait.h> > #include <linux/sched.h> > +#include <linux/kfifo.h> > +#include <linux/rmi.h> > #include "hid-ids.h" > > #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ > @@ -33,9 +35,6 @@ > #define RMI_READ_DATA_PENDING 1 > #define RMI_STARTED 2 > > -#define RMI_SLEEP_NORMAL 0x0 > -#define RMI_SLEEP_DEEP_SLEEP 0x1 > - > /* device flags */ > #define RMI_DEVICE BIT(0) > #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) > @@ -54,18 +53,10 @@ enum rmi_mode_type { > RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, > }; > > -struct rmi_function { > - unsigned page; /* page of the function */ > - u16 query_base_addr; /* base address for queries */ > - u16 command_base_addr; /* base address for commands */ > - u16 control_base_addr; /* base address for controls */ > - u16 data_base_addr; /* base address for datas */ > - unsigned int interrupt_base; /* cross-function interrupt number > - * (uniq in the device)*/ > - unsigned int interrupt_count; /* number of interrupts */ > - unsigned int report_size; /* size of a report */ > - unsigned long irq_mask; /* mask of the interrupts > - * (to be applied against ATTN IRQ) */ > +/* Structure for storing attn report plus size of valid data in the kfifo */ > +struct rmi_attn_report { > + int size; > + u8 data[]; > }; > > /** > @@ -84,26 +75,22 @@ struct rmi_function { > * > * @flags: flags for the current device (started, reading, etc...) > * > - * @f11: placeholder of internal RMI function F11 description > - * @f30: placeholder of internal RMI function F30 description > - * > - * @max_fingers: maximum finger count reported by the device > - * @max_x: maximum x value reported by the device > - * @max_y: maximum y value reported by the device > - * > - * @gpio_led_count: count of GPIOs + LEDs reported by F30 > - * @button_count: actual physical buttons count > - * @button_mask: button mask used to decode GPIO ATTN reports > - * @button_state_mask: pull state of the buttons > - * > - * @input: pointer to the kernel input device > - * > * @reset_work: worker which will be called in case of a mouse report > + * @attn_work: worker used for processing attention reports > * @hdev: pointer to the struct hid_device > + * > + * @device_flags: flags which describe the device > + * > + * @attn_report_fifo: Store attn reports for deferred processing by worker > + * @attn_report_size: size of an input report plus the size int > + * @attn_report: buffer for storing the attn report while it is being processes > + * @in_attn_report: buffer for storing input report plus size before adding it > + * to the fifo. > */ > struct rmi_data { > struct mutex page_mutex; > int page; > + struct rmi_transport_dev xport; Nitpick: this is not documented above :) > > wait_queue_head_t wait; > > @@ -115,34 +102,16 @@ struct rmi_data { > > unsigned long flags; > > - struct rmi_function f01; > - struct rmi_function f11; > - struct rmi_function f30; > - > - unsigned int max_fingers; > - unsigned int max_x; > - unsigned int max_y; > - unsigned int x_size_mm; > - unsigned int y_size_mm; > - bool read_f11_ctrl_regs; > - u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT]; > - > - unsigned int gpio_led_count; > - unsigned int button_count; > - unsigned long button_mask; > - unsigned long button_state_mask; > - > - struct input_dev *input; > - > struct work_struct reset_work; > + struct work_struct attn_work; > struct hid_device *hdev; > > unsigned long device_flags; > - unsigned long firmware_id; > > - u8 f01_ctrl0; > - u8 interrupt_enable_mask; > - bool restore_interrupt_mask; > + struct kfifo attn_report_fifo; > + int attn_report_size; > + struct rmi_attn_report *attn_report; > + struct rmi_attn_report *in_attn_report; > }; > > #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) > @@ -214,10 +183,11 @@ static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) > return ret; > } > > -static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, > - const int len) > +static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr, > + void *buf, size_t len) > { > - struct rmi_data *data = hid_get_drvdata(hdev); > + struct rmi_data *data = container_of(xport, struct rmi_data, xport); > + struct hid_device *hdev = data->hdev; > int ret; > int bytes_read; > int bytes_needed; > @@ -286,15 +256,11 @@ exit: > return ret; > } > > -static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) > -{ > - return rmi_read_block(hdev, addr, buf, 1); > -} > - > -static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf, > - const int len) > +static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr, > + const void *buf, size_t len) > { > - struct rmi_data *data = hid_get_drvdata(hdev); > + struct rmi_data *data = container_of(xport, struct rmi_data, xport); > + struct hid_device *hdev = data->hdev; > int ret; > > mutex_lock(&data->page_mutex); > @@ -326,62 +292,20 @@ exit: > return ret; > } > > -static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf) > -{ > - return rmi_write_block(hdev, addr, buf, 1); > -} > - > -static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, > - u8 finger_state, u8 *touch_data) > -{ > - int x, y, wx, wy; > - int wide, major, minor; > - int z; > - > - input_mt_slot(hdata->input, slot); > - input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, > - finger_state == 0x01); > - if (finger_state == 0x01) { > - x = (touch_data[0] << 4) | (touch_data[2] & 0x0F); > - y = (touch_data[1] << 4) | (touch_data[2] >> 4); > - wx = touch_data[3] & 0x0F; > - wy = touch_data[3] >> 4; > - wide = (wx > wy); > - major = max(wx, wy); > - minor = min(wx, wy); > - z = touch_data[4]; > - > - /* y is inverted */ > - y = hdata->max_y - y; > - > - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); > - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); > - input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); > - input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); > - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); > - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); > - } > -} > - > static int rmi_reset_attn_mode(struct hid_device *hdev) > { > struct rmi_data *data = hid_get_drvdata(hdev); > + struct rmi_device *rmi_dev = data->xport.rmi_dev; > int ret; > > ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); > if (ret) > return ret; > > - if (data->restore_interrupt_mask) { > - ret = rmi_write(hdev, data->f01.control_base_addr + 1, > - &data->interrupt_enable_mask); > - if (ret) { > - hid_err(hdev, "can not write F01 control register\n"); > - return ret; > - } > - } > + if (test_bit(RMI_STARTED, &data->flags)) > + ret = rmi_dev->driver->reset_handler(rmi_dev); > > - return 0; > + return ret; > } > > static void rmi_reset_work(struct work_struct *work) > @@ -393,102 +317,42 @@ static void rmi_reset_work(struct work_struct *work) > rmi_reset_attn_mode(hdata->hdev); > } > > -static inline int rmi_schedule_reset(struct hid_device *hdev) > +static void rmi_attn_work(struct work_struct *work) > { > - struct rmi_data *hdata = hid_get_drvdata(hdev); > - return schedule_work(&hdata->reset_work); > -} > - > -static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, > - int size) > -{ > - struct rmi_data *hdata = hid_get_drvdata(hdev); > - int offset; > - int i; > - > - if (!(irq & hdata->f11.irq_mask) || size <= 0) > - return 0; > - > - offset = (hdata->max_fingers >> 2) + 1; > - for (i = 0; i < hdata->max_fingers; i++) { > - int fs_byte_position = i >> 2; > - int fs_bit_position = (i & 0x3) << 1; > - int finger_state = (data[fs_byte_position] >> fs_bit_position) & > - 0x03; > - int position = offset + 5 * i; > - > - if (position + 5 > size) { > - /* partial report, go on with what we received */ > - printk_once(KERN_WARNING > - "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n", > - dev_driver_string(&hdev->dev), > - dev_name(&hdev->dev)); > - hid_dbg(hdev, "Incomplete finger report\n"); > - break; > - } > - > - rmi_f11_process_touch(hdata, i, finger_state, &data[position]); > - } > - input_mt_sync_frame(hdata->input); > - input_sync(hdata->input); > - return hdata->f11.report_size; > -} > + struct rmi_data *hdata = container_of(work, struct rmi_data, > + attn_work); > + struct rmi_device *rmi_dev = hdata->xport.rmi_dev; > + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); > + int ret; > > -static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, > - int size) > -{ > - struct rmi_data *hdata = hid_get_drvdata(hdev); > - int i; > - int button = 0; > - bool value; > + ret = kfifo_out(&hdata->attn_report_fifo, hdata->attn_report, > + hdata->attn_report_size); > + if (ret != hdata->attn_report_size) > + return; > > - if (!(irq & hdata->f30.irq_mask)) > - return 0; > + *(drvdata->irq_status) = hdata->attn_report->data[1]; > + hdata->xport.attn_data = &hdata->attn_report->data[2]; > + hdata->xport.attn_size = hdata->attn_report->size - 2; > > - if (size < (int)hdata->f30.report_size) { > - hid_warn(hdev, "Click Button pressed, but the click data is missing\n"); > - return 0; > - } > + rmi_process_interrupt_requests(rmi_dev); > > - for (i = 0; i < hdata->gpio_led_count; i++) { > - if (test_bit(i, &hdata->button_mask)) { > - value = (data[i / 8] >> (i & 0x07)) & BIT(0); > - if (test_bit(i, &hdata->button_state_mask)) > - value = !value; > - input_event(hdata->input, EV_KEY, BTN_LEFT + button++, > - value); > - } > - } > - return hdata->f30.report_size; > + if (!kfifo_is_empty(&hdata->attn_report_fifo)) > + schedule_work(&hdata->attn_work); > } > > static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) > { > struct rmi_data *hdata = hid_get_drvdata(hdev); > - unsigned long irq_mask = 0; > - unsigned index = 2; > > if (!(test_bit(RMI_STARTED, &hdata->flags))) > return 0; > > - irq_mask |= hdata->f11.irq_mask; > - irq_mask |= hdata->f30.irq_mask; > - > - if (data[1] & ~irq_mask) > - hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n", > - data[1] & ~irq_mask, __FILE__, __LINE__); > - > - if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { > - index += rmi_f11_input_event(hdev, data[1], &data[index], > - size - index); > - index += rmi_f30_input_event(hdev, data[1], &data[index], > - size - index); > - } else { > - index += rmi_f30_input_event(hdev, data[1], &data[index], > - size - index); > - index += rmi_f11_input_event(hdev, data[1], &data[index], > - size - index); > - } > + hdata->in_attn_report->size = size; > + memcpy(&hdata->in_attn_report->data, data, size); > + > + kfifo_in(&hdata->attn_report_fifo, hdata->in_attn_report, > + hdata->attn_report_size); > + schedule_work(&hdata->attn_work); > > return 1; > } > @@ -562,7 +426,7 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, > return 1; > } > > - rmi_schedule_reset(hdev); > + schedule_work(&data->reset_work); > return 1; > } > > @@ -570,637 +434,71 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, > } > > #ifdef CONFIG_PM > -static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > - int ret; > - u8 f01_ctrl0; > - > - f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode; > - > - ret = rmi_write(hdev, data->f01.control_base_addr, > - &f01_ctrl0); > - if (ret) { > - hid_err(hdev, "can not write sleep mode\n"); > - return ret; > - } > - > - return 0; > -} > - > static int rmi_suspend(struct hid_device *hdev, pm_message_t message) > { > struct rmi_data *data = hid_get_drvdata(hdev); > - int ret; > - u8 buf[RMI_F11_CTRL_REG_COUNT]; > - > - if (!(data->device_flags & RMI_DEVICE)) > - return 0; > - > - ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, > - RMI_F11_CTRL_REG_COUNT); > - if (ret) > - hid_warn(hdev, "can not read F11 control registers\n"); > - else > - memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT); > - > - > - if (!device_may_wakeup(hdev->dev.parent)) > - return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP); > - > - return 0; > -} > - > -static int rmi_post_reset(struct hid_device *hdev) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > + struct rmi_device *rmi_dev = data->xport.rmi_dev; > int ret; > > if (!(data->device_flags & RMI_DEVICE)) > return 0; > > - ret = rmi_reset_attn_mode(hdev); > + ret = rmi_driver_suspend(rmi_dev); > if (ret) { > - hid_err(hdev, "can not set rmi mode\n"); > + hid_warn(hdev, "Failed to suspend device: %d\n", ret); > return ret; > } > > - if (data->read_f11_ctrl_regs) { > - ret = rmi_write_block(hdev, data->f11.control_base_addr, > - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); > - if (ret) > - hid_warn(hdev, > - "can not write F11 control registers after reset\n"); > - } > - > - if (!device_may_wakeup(hdev->dev.parent)) { > - ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL); > - if (ret) { > - hid_err(hdev, "can not write sleep mode\n"); > - return ret; > - } > - } > - > - return ret; > + return 0; > } > > static int rmi_post_resume(struct hid_device *hdev) > { > struct rmi_data *data = hid_get_drvdata(hdev); > + struct rmi_device *rmi_dev = data->xport.rmi_dev; > + int ret; > > if (!(data->device_flags & RMI_DEVICE)) > return 0; > > - return rmi_reset_attn_mode(hdev); > -} > -#endif /* CONFIG_PM */ > - > -#define RMI4_MAX_PAGE 0xff > -#define RMI4_PAGE_SIZE 0x0100 > - > -#define PDT_START_SCAN_LOCATION 0x00e9 > -#define PDT_END_SCAN_LOCATION 0x0005 > -#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) > - > -struct pdt_entry { > - u8 query_base_addr:8; > - u8 command_base_addr:8; > - u8 control_base_addr:8; > - u8 data_base_addr:8; > - u8 interrupt_source_count:3; > - u8 bits3and4:2; > - u8 function_version:2; > - u8 bit7:1; > - u8 function_number:8; > -} __attribute__((__packed__)); > - > -static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) > -{ > - return GENMASK(irq_count + irq_base - 1, irq_base); > -} > - > -static void rmi_register_function(struct rmi_data *data, > - struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) > -{ > - struct rmi_function *f = NULL; > - u16 page_base = page << 8; > - > - switch (pdt_entry->function_number) { > - case 0x01: > - f = &data->f01; > - break; > - case 0x11: > - f = &data->f11; > - break; > - case 0x30: > - f = &data->f30; > - break; > - } > - > - if (f) { > - f->page = page; > - f->query_base_addr = page_base | pdt_entry->query_base_addr; > - f->command_base_addr = page_base | pdt_entry->command_base_addr; > - f->control_base_addr = page_base | pdt_entry->control_base_addr; > - f->data_base_addr = page_base | pdt_entry->data_base_addr; > - f->interrupt_base = interrupt_count; > - f->interrupt_count = pdt_entry->interrupt_source_count; > - f->irq_mask = rmi_gen_mask(f->interrupt_base, > - f->interrupt_count); > - data->interrupt_enable_mask |= f->irq_mask; > - } > -} > - > -static int rmi_scan_pdt(struct hid_device *hdev) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > - struct pdt_entry entry; > - int page; > - bool page_has_function; > - int i; > - int retval; > - int interrupt = 0; > - u16 page_start, pdt_start , pdt_end; > - > - hid_info(hdev, "Scanning PDT...\n"); > - > - for (page = 0; (page <= RMI4_MAX_PAGE); page++) { > - page_start = RMI4_PAGE_SIZE * page; > - pdt_start = page_start + PDT_START_SCAN_LOCATION; > - pdt_end = page_start + PDT_END_SCAN_LOCATION; > - > - page_has_function = false; > - for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { > - retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); > - if (retval) { > - hid_err(hdev, > - "Read of PDT entry at %#06x failed.\n", > - i); > - goto error_exit; > - } > - > - if (RMI4_END_OF_PDT(entry.function_number)) > - break; > - > - page_has_function = true; > - > - hid_info(hdev, "Found F%02X on page %#04x\n", > - entry.function_number, page); > - > - rmi_register_function(data, &entry, page, interrupt); > - interrupt += entry.interrupt_source_count; > - } > - > - if (!page_has_function) > - break; > - } > - > - hid_info(hdev, "%s: Done with PDT scan.\n", __func__); > - retval = 0; > - > -error_exit: > - return retval; > -} > - > -#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11 > - > -static int rmi_populate_f01(struct hid_device *hdev) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > - u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN]; > - u8 info[3]; > - int ret; > - bool has_query42; > - bool has_lts; > - bool has_sensor_id; > - bool has_ds4_queries = false; > - bool has_build_id_query = false; > - bool has_package_id_query = false; > - u16 query_offset = data->f01.query_base_addr; > - u16 prod_info_addr; > - u8 ds4_query_len; > - > - ret = rmi_read_block(hdev, query_offset, basic_queries, > - RMI_DEVICE_F01_BASIC_QUERY_LEN); > - if (ret) { > - hid_err(hdev, "Can not read basic queries from Function 0x1.\n"); > - return ret; > - } > - > - has_lts = !!(basic_queries[0] & BIT(2)); > - has_sensor_id = !!(basic_queries[1] & BIT(3)); > - has_query42 = !!(basic_queries[1] & BIT(7)); > - > - query_offset += 11; > - prod_info_addr = query_offset + 6; > - query_offset += 10; > - > - if (has_lts) > - query_offset += 20; > - > - if (has_sensor_id) > - query_offset++; > - > - if (has_query42) { > - ret = rmi_read(hdev, query_offset, info); > - if (ret) { > - hid_err(hdev, "Can not read query42.\n"); > - return ret; > - } > - has_ds4_queries = !!(info[0] & BIT(0)); > - query_offset++; > - } > - > - if (has_ds4_queries) { > - ret = rmi_read(hdev, query_offset, &ds4_query_len); > - if (ret) { > - hid_err(hdev, "Can not read DS4 Query length.\n"); > - return ret; > - } > - query_offset++; > - > - if (ds4_query_len > 0) { > - ret = rmi_read(hdev, query_offset, info); > - if (ret) { > - hid_err(hdev, "Can not read DS4 query.\n"); > - return ret; > - } > - > - has_package_id_query = !!(info[0] & BIT(0)); > - has_build_id_query = !!(info[0] & BIT(1)); > - } > - } > - > - if (has_package_id_query) > - prod_info_addr++; > - > - if (has_build_id_query) { > - ret = rmi_read_block(hdev, prod_info_addr, info, 3); > - if (ret) { > - hid_err(hdev, "Can not read product info.\n"); > - return ret; > - } > - > - data->firmware_id = info[1] << 8 | info[0]; > - data->firmware_id += info[2] * 65536; > - } > - > - ret = rmi_read_block(hdev, data->f01.control_base_addr, info, > - 2); > - > - if (ret) { > - hid_err(hdev, "can not read f01 ctrl registers\n"); > - return ret; > - } > - > - data->f01_ctrl0 = info[0]; > - > - if (!info[1]) { > - /* > - * Do to a firmware bug in some touchpads the F01 interrupt > - * enable control register will be cleared on reset. > - * This will stop the touchpad from reporting data, so > - * if F01 CTRL1 is 0 then we need to explicitly enable > - * interrupts for the functions we want data for. > - */ > - data->restore_interrupt_mask = true; > - > - ret = rmi_write(hdev, data->f01.control_base_addr + 1, > - &data->interrupt_enable_mask); > - if (ret) { > - hid_err(hdev, "can not write to control reg 1: %d.\n", > - ret); > - return ret; > - } > - } > - > - return 0; > -} > - > -static int rmi_populate_f11(struct hid_device *hdev) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > - u8 buf[20]; > - int ret; > - bool has_query9; > - bool has_query10 = false; > - bool has_query11; > - bool has_query12; > - bool has_query27; > - bool has_query28; > - bool has_query36 = false; > - bool has_physical_props; > - bool has_gestures; > - bool has_rel; > - bool has_data40 = false; > - bool has_dribble = false; > - bool has_palm_detect = false; > - unsigned x_size, y_size; > - u16 query_offset; > - > - if (!data->f11.query_base_addr) { > - hid_err(hdev, "No 2D sensor found, giving up.\n"); > - return -ENODEV; > - } > - > - /* query 0 contains some useful information */ > - ret = rmi_read(hdev, data->f11.query_base_addr, buf); > - if (ret) { > - hid_err(hdev, "can not get query 0: %d.\n", ret); > - return ret; > - } > - has_query9 = !!(buf[0] & BIT(3)); > - has_query11 = !!(buf[0] & BIT(4)); > - has_query12 = !!(buf[0] & BIT(5)); > - has_query27 = !!(buf[0] & BIT(6)); > - has_query28 = !!(buf[0] & BIT(7)); > - > - /* query 1 to get the max number of fingers */ > - ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); > - if (ret) { > - hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); > - return ret; > - } > - data->max_fingers = (buf[0] & 0x07) + 1; > - if (data->max_fingers > 5) > - data->max_fingers = 10; > - > - data->f11.report_size = data->max_fingers * 5 + > - DIV_ROUND_UP(data->max_fingers, 4); > - > - if (!(buf[0] & BIT(4))) { > - hid_err(hdev, "No absolute events, giving up.\n"); > - return -ENODEV; > - } > - > - has_rel = !!(buf[0] & BIT(3)); > - has_gestures = !!(buf[0] & BIT(5)); > - > - ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf); > - if (ret) { > - hid_err(hdev, "can not get absolute data sources: %d.\n", ret); > - return ret; > - } > - > - has_dribble = !!(buf[0] & BIT(4)); > - > - /* > - * At least 4 queries are guaranteed to be present in F11 > - * +1 for query 5 which is present since absolute events are > - * reported and +1 for query 12. > - */ > - query_offset = 6; > - > - if (has_rel) > - ++query_offset; /* query 6 is present */ > - > - if (has_gestures) { > - /* query 8 to find out if query 10 exists */ > - ret = rmi_read(hdev, > - data->f11.query_base_addr + query_offset + 1, buf); > - if (ret) { > - hid_err(hdev, "can not read gesture information: %d.\n", > - ret); > - return ret; > - } > - has_palm_detect = !!(buf[0] & BIT(0)); > - has_query10 = !!(buf[0] & BIT(2)); > - > - query_offset += 2; /* query 7 and 8 are present */ > - } > - > - if (has_query9) > - ++query_offset; > - > - if (has_query10) > - ++query_offset; > - > - if (has_query11) > - ++query_offset; > - > - /* query 12 to know if the physical properties are reported */ > - if (has_query12) { > - ret = rmi_read(hdev, data->f11.query_base_addr > - + query_offset, buf); > - if (ret) { > - hid_err(hdev, "can not get query 12: %d.\n", ret); > - return ret; > - } > - has_physical_props = !!(buf[0] & BIT(5)); > - > - if (has_physical_props) { > - query_offset += 1; > - ret = rmi_read_block(hdev, > - data->f11.query_base_addr > - + query_offset, buf, 4); > - if (ret) { > - hid_err(hdev, "can not read query 15-18: %d.\n", > - ret); > - return ret; > - } > - > - x_size = buf[0] | (buf[1] << 8); > - y_size = buf[2] | (buf[3] << 8); > - > - data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); > - data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); > - > - hid_info(hdev, "%s: size in mm: %d x %d\n", > - __func__, data->x_size_mm, data->y_size_mm); > - > - /* > - * query 15 - 18 contain the size of the sensor > - * and query 19 - 26 contain bezel dimensions > - */ > - query_offset += 12; > - } > - } > - > - if (has_query27) > - ++query_offset; > - > - if (has_query28) { > - ret = rmi_read(hdev, data->f11.query_base_addr > - + query_offset, buf); > - if (ret) { > - hid_err(hdev, "can not get query 28: %d.\n", ret); > - return ret; > - } > - > - has_query36 = !!(buf[0] & BIT(6)); > - } > - > - if (has_query36) { > - query_offset += 2; > - ret = rmi_read(hdev, data->f11.query_base_addr > - + query_offset, buf); > - if (ret) { > - hid_err(hdev, "can not get query 36: %d.\n", ret); > - return ret; > - } > - > - has_data40 = !!(buf[0] & BIT(5)); > - } > - > - > - if (has_data40) > - data->f11.report_size += data->max_fingers * 2; > - > - ret = rmi_read_block(hdev, data->f11.control_base_addr, > - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); > - if (ret) { > - hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret); > - return ret; > - } > - > - /* data->f11_ctrl_regs now contains valid register data */ > - data->read_f11_ctrl_regs = true; > - > - data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8); > - data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8); > - > - if (has_dribble) { > - data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6); > - ret = rmi_write(hdev, data->f11.control_base_addr, > - data->f11_ctrl_regs); > - if (ret) { > - hid_err(hdev, "can not write to control reg 0: %d.\n", > - ret); > - return ret; > - } > - } > - > - if (has_palm_detect) { > - data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0); > - ret = rmi_write(hdev, data->f11.control_base_addr + 11, > - &data->f11_ctrl_regs[11]); > - if (ret) { > - hid_err(hdev, "can not write to control reg 11: %d.\n", > - ret); > - return ret; > - } > - } > - > - return 0; > -} > - > -static int rmi_populate_f30(struct hid_device *hdev) > -{ > - struct rmi_data *data = hid_get_drvdata(hdev); > - u8 buf[20]; > - int ret; > - bool has_gpio, has_led; > - unsigned bytes_per_ctrl; > - u8 ctrl2_addr; > - int ctrl2_3_length; > - int i; > - > - /* function F30 is for physical buttons */ > - if (!data->f30.query_base_addr) { > - hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); > - return -ENODEV; > - } > - > - ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); > - if (ret) { > - hid_err(hdev, "can not get F30 query registers: %d.\n", ret); > + ret = rmi_reset_attn_mode(hdev); > + if (ret) > return ret; > - } > - > - has_gpio = !!(buf[0] & BIT(3)); > - has_led = !!(buf[0] & BIT(2)); > - data->gpio_led_count = buf[1] & 0x1f; > > - /* retrieve ctrl 2 & 3 registers */ > - bytes_per_ctrl = (data->gpio_led_count + 7) / 8; > - /* Ctrl0 is present only if both has_gpio and has_led are set*/ > - ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; > - /* Ctrl1 is always be present */ > - ctrl2_addr += bytes_per_ctrl; > - ctrl2_3_length = 2 * bytes_per_ctrl; > - > - data->f30.report_size = bytes_per_ctrl; > - > - ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, > - buf, ctrl2_3_length); > + ret = rmi_driver_resume(rmi_dev); > if (ret) { > - hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", > - ctrl2_3_length, ret); > + hid_warn(hdev, "Failed to resume device: %d\n", ret); > return ret; > } > > - for (i = 0; i < data->gpio_led_count; i++) { > - int byte_position = i >> 3; > - int bit_position = i & 0x07; > - u8 dir_byte = buf[byte_position]; > - u8 data_byte = buf[byte_position + bytes_per_ctrl]; > - bool dir = (dir_byte >> bit_position) & BIT(0); > - bool dat = (data_byte >> bit_position) & BIT(0); > - > - if (dir == 0) { > - /* input mode */ > - if (dat) { > - /* actual buttons have pull up resistor */ > - data->button_count++; > - set_bit(i, &data->button_mask); > - set_bit(i, &data->button_state_mask); > - } > - } > - > - } > - > return 0; > } > +#endif /* CONFIG_PM */ > > -static int rmi_populate(struct hid_device *hdev) > +static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr) > { > - struct rmi_data *data = hid_get_drvdata(hdev); > - int ret; > + struct rmi_data *data = container_of(xport, struct rmi_data, xport); > + struct hid_device *hdev = data->hdev; > > - ret = rmi_scan_pdt(hdev); > - if (ret) { > - hid_err(hdev, "PDT scan failed with code %d.\n", ret); > - return ret; > - } > - > - ret = rmi_populate_f01(hdev); > - if (ret) { > - hid_err(hdev, "Error while initializing F01 (%d).\n", ret); > - return ret; > - } > - > - ret = rmi_populate_f11(hdev); > - if (ret) { > - hid_err(hdev, "Error while initializing F11 (%d).\n", ret); > - return ret; > - } > - > - if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) { > - ret = rmi_populate_f30(hdev); > - if (ret) > - hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); > - } > - > - return 0; > + return rmi_reset_attn_mode(hdev); > } > > static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) > { > struct rmi_data *data = hid_get_drvdata(hdev); > struct input_dev *input = hi->input; > - int ret; > - int res_x, res_y, i; > + int ret = 0; > > - data->input = input; > + if (!(data->device_flags & RMI_DEVICE)) > + return 0; > + > + data->xport.input = input; This feels awkward. Why can't you rely on rmi to create the inputs and just use a plain hidraw driver here? > > hid_dbg(hdev, "Opening low level driver\n"); > ret = hid_hw_open(hdev); > if (ret) > return ret; > > - if (!(data->device_flags & RMI_DEVICE)) > - return 0; > - > /* Allow incoming hid reports */ > hid_device_io_start(hdev); > > @@ -1216,40 +514,10 @@ static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) > goto exit; > } > > - ret = rmi_populate(hdev); > - if (ret) > - goto exit; > - > - hid_info(hdev, "firmware id: %ld\n", data->firmware_id); > - > - __set_bit(EV_ABS, input->evbit); > - input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); > - input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); > - > - if (data->x_size_mm && data->y_size_mm) { > - res_x = (data->max_x - 1) / data->x_size_mm; > - res_y = (data->max_y - 1) / data->y_size_mm; > - > - input_abs_set_res(input, ABS_MT_POSITION_X, res_x); > - input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); > - } > - > - input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); > - input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); > - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); > - input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); > - > - ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); > - if (ret < 0) > + ret = rmi_register_transport_device(&data->xport); > + if (ret < 0) { > + dev_err(&hdev->dev, "failed to register transport driver\n"); > goto exit; > - > - if (data->button_count) { > - __set_bit(EV_KEY, input->evbit); > - for (i = 0; i < data->button_count; i++) > - __set_bit(BTN_LEFT + i, input->keybit); > - > - if (data->button_count == 1) > - __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); > } > > set_bit(RMI_STARTED, &data->flags); > @@ -1298,6 +566,27 @@ static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, > return 0; > } > > +static struct rmi_2d_sensor_platform_data rmi_hid_2d_sensor_data = { > + .sensor_type = rmi_sensor_touchpad, > + .axis_align.flip_y = true, > + .dribble = RMI_REG_STATE_OFF, Thinking about the Dell XPS 13 Skylake. I think this one would benefit from a dribble setting to ON. Do you have plan to add platform quirks? > + .palm_detect = RMI_REG_STATE_OFF, > +}; > + > +static struct rmi_f30_data rmi_hid_f30_data = { > +}; > + > +static struct rmi_device_platform_data rmi_hid_pdata = { > + .sensor_pdata = &rmi_hid_2d_sensor_data, > + .f30_data = &rmi_hid_f30_data, > +}; > + > +static const struct rmi_transport_ops hid_rmi_ops = { > + .write_block = rmi_hid_write_block, > + .read_block = rmi_hid_read_block, > + .reset = rmi_hid_reset, > +}; > + > static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) > { > struct rmi_data *data = NULL; > @@ -1312,6 +601,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) > return -ENOMEM; > > INIT_WORK(&data->reset_work, rmi_reset_work); > + INIT_WORK(&data->attn_work, rmi_attn_work); > data->hdev = hdev; > > hid_set_drvdata(hdev, data); > @@ -1359,34 +649,52 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) > > data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); > if (!data->writeReport) { > - ret = -ENOMEM; > - return ret; > + hid_err(hdev, "failed to allocate buffer for HID reports\n"); > + return -ENOMEM; > } > > data->readReport = data->writeReport + data->output_report_size; > > + data->attn_report_size = roundup_pow_of_two( > + sizeof(struct rmi_attn_report) + > + data->input_report_size); > + > + data->attn_report = devm_kzalloc(&hdev->dev, data->attn_report_size * 2, > + GFP_KERNEL); > + if (!data->attn_report) > + return -ENOMEM; > + > + data->in_attn_report = (struct rmi_attn_report *) > + ((u8 *)data->attn_report > + + data->attn_report_size); > + > + ret = kfifo_alloc(&data->attn_report_fifo, data->attn_report_size * 8, > + GFP_KERNEL); > + if (ret) { > + hid_err(hdev, "failed to allocate attn report fifo\n"); > + return -ENOMEM; > + } > + > init_waitqueue_head(&data->wait); > > mutex_init(&data->page_mutex); > > + if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) > + rmi_hid_pdata.f30_data->disable = true; > + > + data->xport.dev = hdev->dev.parent; > + data->xport.pdata = rmi_hid_pdata; > + data->xport.proto_name = "hid"; > + data->xport.ops = &hid_rmi_ops; > + > start: > ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); > if (ret) { > hid_err(hdev, "hw start failed\n"); > + kfifo_free(&data->attn_report_fifo); > return ret; > } > > - if ((data->device_flags & RMI_DEVICE) && > - !test_bit(RMI_STARTED, &data->flags)) > - /* > - * The device maybe in the bootloader if rmi_input_configured > - * failed to find F11 in the PDT. Print an error, but don't > - * return an error from rmi_probe so that hidraw will be > - * accessible from userspace. That way a userspace tool > - * can be used to reload working firmware on the touchpad. > - */ > - hid_err(hdev, "Device failed to be properly configured\n"); > - > return 0; > } > > @@ -1395,6 +703,10 @@ static void rmi_remove(struct hid_device *hdev) > struct rmi_data *hdata = hid_get_drvdata(hdev); > > clear_bit(RMI_STARTED, &hdata->flags); > + cancel_work_sync(&hdata->reset_work); > + cancel_work_sync(&hdata->attn_work); > + rmi_unregister_transport_device(&hdata->xport); > + kfifo_free(&hdata->attn_report_fifo); > > hid_hw_stop(hdev); > } > @@ -1419,7 +731,7 @@ static struct hid_driver rmi_driver = { > #ifdef CONFIG_PM > .suspend = rmi_suspend, > .resume = rmi_post_resume, > - .reset_resume = rmi_post_reset, > + .reset_resume = rmi_post_resume, > #endif > }; > > -- > 2.5.0 > The rest looks OK. Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/15/2016 02:54 AM, Benjamin Tissoires wrote: > On Jun 03 2016 or thereabouts, Andrew Duggan wrote: >> The Synaptics RMI4 driver provides support for RMI4 devices. Instead of >> duplicating the RMI4 processing code, make hid-rmi a transport driver >> and register it with the Synaptics RMI4 core. >> >> Signed-off-by: Andrew Duggan <aduggan@synaptics.com> >> --- >> Here is the updated version of the hid-rmi patch. This patch along with >> the series I just posted for rmi_core, provides all of the functionality >> currently present in hid-rmi. This patch does depend on the changes in >> the rmi_core patch series to build since it is setting fields in >> struct rmi_2d_sensor_platform_data which are added in that series. >> I can separate setting those fields into a separate patch if that helps >> with integrating between the input and HID trees. >> >> In addition to the core changes this version also adds a fifo so that >> attention reports are stored when the attn worker is processing a report. >> >> I also changes the Kconfig options since the previous patch. The previous >> version just added a dependency on RMI4_CORE. But, if you take a previous >> config with HID_RMI set and don't know to set RMI4_CORE, F11, and F30 >> users will end up with a touchpad which doesn't work. > Don't you need F12 too (for precision touchpads IIRC?). I will have to submit a patch which modifies hid-core to bind precision touchpads to hid-rmi before they can be used by hid-rmi. I figured I would add F12 to the Kconfig then. But, I can add it in my v3 patch. It doesn't make a significant difference either way and might be better just to do all of the Kconfig changes now. >> Thanks, >> Andrew >> >> drivers/hid/Kconfig | 3 + >> drivers/hid/hid-rmi.c | 962 +++++++------------------------------------------- >> 2 files changed, 140 insertions(+), 825 deletions(-) >> >> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig >> index 4117225..0520626 100644 >> --- a/drivers/hid/Kconfig >> +++ b/drivers/hid/Kconfig >> @@ -747,6 +747,9 @@ config HID_SUNPLUS >> config HID_RMI >> tristate "Synaptics RMI4 device support" >> depends on HID >> + select RMI4_CORE >> + select RMI4_F11 >> + select RMI4_F30 >> ---help--- >> Support for Synaptics RMI4 touchpads. >> Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid >> diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c >> index 9cd2ca3..34ff9a2 100644 >> --- a/drivers/hid/hid-rmi.c >> +++ b/drivers/hid/hid-rmi.c >> @@ -19,6 +19,8 @@ >> #include <linux/slab.h> >> #include <linux/wait.h> >> #include <linux/sched.h> >> +#include <linux/kfifo.h> >> +#include <linux/rmi.h> >> #include "hid-ids.h" >> >> #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ >> @@ -33,9 +35,6 @@ >> #define RMI_READ_DATA_PENDING 1 >> #define RMI_STARTED 2 >> >> -#define RMI_SLEEP_NORMAL 0x0 >> -#define RMI_SLEEP_DEEP_SLEEP 0x1 >> - >> /* device flags */ >> #define RMI_DEVICE BIT(0) >> #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) >> @@ -54,18 +53,10 @@ enum rmi_mode_type { >> RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, >> }; >> >> -struct rmi_function { >> - unsigned page; /* page of the function */ >> - u16 query_base_addr; /* base address for queries */ >> - u16 command_base_addr; /* base address for commands */ >> - u16 control_base_addr; /* base address for controls */ >> - u16 data_base_addr; /* base address for datas */ >> - unsigned int interrupt_base; /* cross-function interrupt number >> - * (uniq in the device)*/ >> - unsigned int interrupt_count; /* number of interrupts */ >> - unsigned int report_size; /* size of a report */ >> - unsigned long irq_mask; /* mask of the interrupts >> - * (to be applied against ATTN IRQ) */ >> +/* Structure for storing attn report plus size of valid data in the kfifo */ >> +struct rmi_attn_report { >> + int size; >> + u8 data[]; >> }; >> >> /** >> @@ -84,26 +75,22 @@ struct rmi_function { >> * >> * @flags: flags for the current device (started, reading, etc...) >> * >> - * @f11: placeholder of internal RMI function F11 description >> - * @f30: placeholder of internal RMI function F30 description >> - * >> - * @max_fingers: maximum finger count reported by the device >> - * @max_x: maximum x value reported by the device >> - * @max_y: maximum y value reported by the device >> - * >> - * @gpio_led_count: count of GPIOs + LEDs reported by F30 >> - * @button_count: actual physical buttons count >> - * @button_mask: button mask used to decode GPIO ATTN reports >> - * @button_state_mask: pull state of the buttons >> - * >> - * @input: pointer to the kernel input device >> - * >> * @reset_work: worker which will be called in case of a mouse report >> + * @attn_work: worker used for processing attention reports >> * @hdev: pointer to the struct hid_device >> + * >> + * @device_flags: flags which describe the device >> + * >> + * @attn_report_fifo: Store attn reports for deferred processing by worker >> + * @attn_report_size: size of an input report plus the size int >> + * @attn_report: buffer for storing the attn report while it is being processes >> + * @in_attn_report: buffer for storing input report plus size before adding it >> + * to the fifo. >> */ >> struct rmi_data { >> struct mutex page_mutex; >> int page; >> + struct rmi_transport_dev xport; > Nitpick: this is not documented above :) OK, I'll add documentation. >> >> wait_queue_head_t wait; >> >> @@ -115,34 +102,16 @@ struct rmi_data { >> >> unsigned long flags; >> >> - struct rmi_function f01; >> - struct rmi_function f11; >> - struct rmi_function f30; >> - >> - unsigned int max_fingers; >> - unsigned int max_x; >> - unsigned int max_y; >> - unsigned int x_size_mm; >> - unsigned int y_size_mm; >> - bool read_f11_ctrl_regs; >> - u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT]; >> - >> - unsigned int gpio_led_count; >> - unsigned int button_count; >> - unsigned long button_mask; >> - unsigned long button_state_mask; >> - >> - struct input_dev *input; >> - >> struct work_struct reset_work; >> + struct work_struct attn_work; >> struct hid_device *hdev; >> >> unsigned long device_flags; >> - unsigned long firmware_id; >> >> - u8 f01_ctrl0; >> - u8 interrupt_enable_mask; >> - bool restore_interrupt_mask; >> + struct kfifo attn_report_fifo; >> + int attn_report_size; >> + struct rmi_attn_report *attn_report; >> + struct rmi_attn_report *in_attn_report; >> }; >> >> #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) >> @@ -214,10 +183,11 @@ static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) >> return ret; >> } >> >> -static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, >> - const int len) >> +static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr, >> + void *buf, size_t len) >> { >> - struct rmi_data *data = hid_get_drvdata(hdev); >> + struct rmi_data *data = container_of(xport, struct rmi_data, xport); >> + struct hid_device *hdev = data->hdev; >> int ret; >> int bytes_read; >> int bytes_needed; >> @@ -286,15 +256,11 @@ exit: >> return ret; >> } >> >> -static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) >> -{ >> - return rmi_read_block(hdev, addr, buf, 1); >> -} >> - >> -static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf, >> - const int len) >> +static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr, >> + const void *buf, size_t len) >> { >> - struct rmi_data *data = hid_get_drvdata(hdev); >> + struct rmi_data *data = container_of(xport, struct rmi_data, xport); >> + struct hid_device *hdev = data->hdev; >> int ret; >> >> mutex_lock(&data->page_mutex); >> @@ -326,62 +292,20 @@ exit: >> return ret; >> } >> >> -static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf) >> -{ >> - return rmi_write_block(hdev, addr, buf, 1); >> -} >> - >> -static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, >> - u8 finger_state, u8 *touch_data) >> -{ >> - int x, y, wx, wy; >> - int wide, major, minor; >> - int z; >> - >> - input_mt_slot(hdata->input, slot); >> - input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, >> - finger_state == 0x01); >> - if (finger_state == 0x01) { >> - x = (touch_data[0] << 4) | (touch_data[2] & 0x0F); >> - y = (touch_data[1] << 4) | (touch_data[2] >> 4); >> - wx = touch_data[3] & 0x0F; >> - wy = touch_data[3] >> 4; >> - wide = (wx > wy); >> - major = max(wx, wy); >> - minor = min(wx, wy); >> - z = touch_data[4]; >> - >> - /* y is inverted */ >> - y = hdata->max_y - y; >> - >> - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); >> - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); >> - input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); >> - input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); >> - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); >> - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); >> - } >> -} >> - >> static int rmi_reset_attn_mode(struct hid_device *hdev) >> { >> struct rmi_data *data = hid_get_drvdata(hdev); >> + struct rmi_device *rmi_dev = data->xport.rmi_dev; >> int ret; >> >> ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); >> if (ret) >> return ret; >> >> - if (data->restore_interrupt_mask) { >> - ret = rmi_write(hdev, data->f01.control_base_addr + 1, >> - &data->interrupt_enable_mask); >> - if (ret) { >> - hid_err(hdev, "can not write F01 control register\n"); >> - return ret; >> - } >> - } >> + if (test_bit(RMI_STARTED, &data->flags)) >> + ret = rmi_dev->driver->reset_handler(rmi_dev); >> >> - return 0; >> + return ret; >> } >> >> static void rmi_reset_work(struct work_struct *work) >> @@ -393,102 +317,42 @@ static void rmi_reset_work(struct work_struct *work) >> rmi_reset_attn_mode(hdata->hdev); >> } >> >> -static inline int rmi_schedule_reset(struct hid_device *hdev) >> +static void rmi_attn_work(struct work_struct *work) >> { >> - struct rmi_data *hdata = hid_get_drvdata(hdev); >> - return schedule_work(&hdata->reset_work); >> -} >> - >> -static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, >> - int size) >> -{ >> - struct rmi_data *hdata = hid_get_drvdata(hdev); >> - int offset; >> - int i; >> - >> - if (!(irq & hdata->f11.irq_mask) || size <= 0) >> - return 0; >> - >> - offset = (hdata->max_fingers >> 2) + 1; >> - for (i = 0; i < hdata->max_fingers; i++) { >> - int fs_byte_position = i >> 2; >> - int fs_bit_position = (i & 0x3) << 1; >> - int finger_state = (data[fs_byte_position] >> fs_bit_position) & >> - 0x03; >> - int position = offset + 5 * i; >> - >> - if (position + 5 > size) { >> - /* partial report, go on with what we received */ >> - printk_once(KERN_WARNING >> - "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n", >> - dev_driver_string(&hdev->dev), >> - dev_name(&hdev->dev)); >> - hid_dbg(hdev, "Incomplete finger report\n"); >> - break; >> - } >> - >> - rmi_f11_process_touch(hdata, i, finger_state, &data[position]); >> - } >> - input_mt_sync_frame(hdata->input); >> - input_sync(hdata->input); >> - return hdata->f11.report_size; >> -} >> + struct rmi_data *hdata = container_of(work, struct rmi_data, >> + attn_work); >> + struct rmi_device *rmi_dev = hdata->xport.rmi_dev; >> + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); >> + int ret; >> >> -static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, >> - int size) >> -{ >> - struct rmi_data *hdata = hid_get_drvdata(hdev); >> - int i; >> - int button = 0; >> - bool value; >> + ret = kfifo_out(&hdata->attn_report_fifo, hdata->attn_report, >> + hdata->attn_report_size); >> + if (ret != hdata->attn_report_size) >> + return; >> >> - if (!(irq & hdata->f30.irq_mask)) >> - return 0; >> + *(drvdata->irq_status) = hdata->attn_report->data[1]; >> + hdata->xport.attn_data = &hdata->attn_report->data[2]; >> + hdata->xport.attn_size = hdata->attn_report->size - 2; >> >> - if (size < (int)hdata->f30.report_size) { >> - hid_warn(hdev, "Click Button pressed, but the click data is missing\n"); >> - return 0; >> - } >> + rmi_process_interrupt_requests(rmi_dev); >> >> - for (i = 0; i < hdata->gpio_led_count; i++) { >> - if (test_bit(i, &hdata->button_mask)) { >> - value = (data[i / 8] >> (i & 0x07)) & BIT(0); >> - if (test_bit(i, &hdata->button_state_mask)) >> - value = !value; >> - input_event(hdata->input, EV_KEY, BTN_LEFT + button++, >> - value); >> - } >> - } >> - return hdata->f30.report_size; >> + if (!kfifo_is_empty(&hdata->attn_report_fifo)) >> + schedule_work(&hdata->attn_work); >> } >> >> static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) >> { >> struct rmi_data *hdata = hid_get_drvdata(hdev); >> - unsigned long irq_mask = 0; >> - unsigned index = 2; >> >> if (!(test_bit(RMI_STARTED, &hdata->flags))) >> return 0; >> >> - irq_mask |= hdata->f11.irq_mask; >> - irq_mask |= hdata->f30.irq_mask; >> - >> - if (data[1] & ~irq_mask) >> - hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n", >> - data[1] & ~irq_mask, __FILE__, __LINE__); >> - >> - if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { >> - index += rmi_f11_input_event(hdev, data[1], &data[index], >> - size - index); >> - index += rmi_f30_input_event(hdev, data[1], &data[index], >> - size - index); >> - } else { >> - index += rmi_f30_input_event(hdev, data[1], &data[index], >> - size - index); >> - index += rmi_f11_input_event(hdev, data[1], &data[index], >> - size - index); >> - } >> + hdata->in_attn_report->size = size; >> + memcpy(&hdata->in_attn_report->data, data, size); >> + >> + kfifo_in(&hdata->attn_report_fifo, hdata->in_attn_report, >> + hdata->attn_report_size); >> + schedule_work(&hdata->attn_work); >> >> return 1; >> } >> @@ -562,7 +426,7 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, >> return 1; >> } >> >> - rmi_schedule_reset(hdev); >> + schedule_work(&data->reset_work); >> return 1; >> } >> >> @@ -570,637 +434,71 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, >> } >> >> #ifdef CONFIG_PM >> -static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - int ret; >> - u8 f01_ctrl0; >> - >> - f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode; >> - >> - ret = rmi_write(hdev, data->f01.control_base_addr, >> - &f01_ctrl0); >> - if (ret) { >> - hid_err(hdev, "can not write sleep mode\n"); >> - return ret; >> - } >> - >> - return 0; >> -} >> - >> static int rmi_suspend(struct hid_device *hdev, pm_message_t message) >> { >> struct rmi_data *data = hid_get_drvdata(hdev); >> - int ret; >> - u8 buf[RMI_F11_CTRL_REG_COUNT]; >> - >> - if (!(data->device_flags & RMI_DEVICE)) >> - return 0; >> - >> - ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, >> - RMI_F11_CTRL_REG_COUNT); >> - if (ret) >> - hid_warn(hdev, "can not read F11 control registers\n"); >> - else >> - memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT); >> - >> - >> - if (!device_may_wakeup(hdev->dev.parent)) >> - return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP); >> - >> - return 0; >> -} >> - >> -static int rmi_post_reset(struct hid_device *hdev) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> + struct rmi_device *rmi_dev = data->xport.rmi_dev; >> int ret; >> >> if (!(data->device_flags & RMI_DEVICE)) >> return 0; >> >> - ret = rmi_reset_attn_mode(hdev); >> + ret = rmi_driver_suspend(rmi_dev); >> if (ret) { >> - hid_err(hdev, "can not set rmi mode\n"); >> + hid_warn(hdev, "Failed to suspend device: %d\n", ret); >> return ret; >> } >> >> - if (data->read_f11_ctrl_regs) { >> - ret = rmi_write_block(hdev, data->f11.control_base_addr, >> - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); >> - if (ret) >> - hid_warn(hdev, >> - "can not write F11 control registers after reset\n"); >> - } >> - >> - if (!device_may_wakeup(hdev->dev.parent)) { >> - ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL); >> - if (ret) { >> - hid_err(hdev, "can not write sleep mode\n"); >> - return ret; >> - } >> - } >> - >> - return ret; >> + return 0; >> } >> >> static int rmi_post_resume(struct hid_device *hdev) >> { >> struct rmi_data *data = hid_get_drvdata(hdev); >> + struct rmi_device *rmi_dev = data->xport.rmi_dev; >> + int ret; >> >> if (!(data->device_flags & RMI_DEVICE)) >> return 0; >> >> - return rmi_reset_attn_mode(hdev); >> -} >> -#endif /* CONFIG_PM */ >> - >> -#define RMI4_MAX_PAGE 0xff >> -#define RMI4_PAGE_SIZE 0x0100 >> - >> -#define PDT_START_SCAN_LOCATION 0x00e9 >> -#define PDT_END_SCAN_LOCATION 0x0005 >> -#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) >> - >> -struct pdt_entry { >> - u8 query_base_addr:8; >> - u8 command_base_addr:8; >> - u8 control_base_addr:8; >> - u8 data_base_addr:8; >> - u8 interrupt_source_count:3; >> - u8 bits3and4:2; >> - u8 function_version:2; >> - u8 bit7:1; >> - u8 function_number:8; >> -} __attribute__((__packed__)); >> - >> -static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) >> -{ >> - return GENMASK(irq_count + irq_base - 1, irq_base); >> -} >> - >> -static void rmi_register_function(struct rmi_data *data, >> - struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) >> -{ >> - struct rmi_function *f = NULL; >> - u16 page_base = page << 8; >> - >> - switch (pdt_entry->function_number) { >> - case 0x01: >> - f = &data->f01; >> - break; >> - case 0x11: >> - f = &data->f11; >> - break; >> - case 0x30: >> - f = &data->f30; >> - break; >> - } >> - >> - if (f) { >> - f->page = page; >> - f->query_base_addr = page_base | pdt_entry->query_base_addr; >> - f->command_base_addr = page_base | pdt_entry->command_base_addr; >> - f->control_base_addr = page_base | pdt_entry->control_base_addr; >> - f->data_base_addr = page_base | pdt_entry->data_base_addr; >> - f->interrupt_base = interrupt_count; >> - f->interrupt_count = pdt_entry->interrupt_source_count; >> - f->irq_mask = rmi_gen_mask(f->interrupt_base, >> - f->interrupt_count); >> - data->interrupt_enable_mask |= f->irq_mask; >> - } >> -} >> - >> -static int rmi_scan_pdt(struct hid_device *hdev) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - struct pdt_entry entry; >> - int page; >> - bool page_has_function; >> - int i; >> - int retval; >> - int interrupt = 0; >> - u16 page_start, pdt_start , pdt_end; >> - >> - hid_info(hdev, "Scanning PDT...\n"); >> - >> - for (page = 0; (page <= RMI4_MAX_PAGE); page++) { >> - page_start = RMI4_PAGE_SIZE * page; >> - pdt_start = page_start + PDT_START_SCAN_LOCATION; >> - pdt_end = page_start + PDT_END_SCAN_LOCATION; >> - >> - page_has_function = false; >> - for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { >> - retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); >> - if (retval) { >> - hid_err(hdev, >> - "Read of PDT entry at %#06x failed.\n", >> - i); >> - goto error_exit; >> - } >> - >> - if (RMI4_END_OF_PDT(entry.function_number)) >> - break; >> - >> - page_has_function = true; >> - >> - hid_info(hdev, "Found F%02X on page %#04x\n", >> - entry.function_number, page); >> - >> - rmi_register_function(data, &entry, page, interrupt); >> - interrupt += entry.interrupt_source_count; >> - } >> - >> - if (!page_has_function) >> - break; >> - } >> - >> - hid_info(hdev, "%s: Done with PDT scan.\n", __func__); >> - retval = 0; >> - >> -error_exit: >> - return retval; >> -} >> - >> -#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11 >> - >> -static int rmi_populate_f01(struct hid_device *hdev) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN]; >> - u8 info[3]; >> - int ret; >> - bool has_query42; >> - bool has_lts; >> - bool has_sensor_id; >> - bool has_ds4_queries = false; >> - bool has_build_id_query = false; >> - bool has_package_id_query = false; >> - u16 query_offset = data->f01.query_base_addr; >> - u16 prod_info_addr; >> - u8 ds4_query_len; >> - >> - ret = rmi_read_block(hdev, query_offset, basic_queries, >> - RMI_DEVICE_F01_BASIC_QUERY_LEN); >> - if (ret) { >> - hid_err(hdev, "Can not read basic queries from Function 0x1.\n"); >> - return ret; >> - } >> - >> - has_lts = !!(basic_queries[0] & BIT(2)); >> - has_sensor_id = !!(basic_queries[1] & BIT(3)); >> - has_query42 = !!(basic_queries[1] & BIT(7)); >> - >> - query_offset += 11; >> - prod_info_addr = query_offset + 6; >> - query_offset += 10; >> - >> - if (has_lts) >> - query_offset += 20; >> - >> - if (has_sensor_id) >> - query_offset++; >> - >> - if (has_query42) { >> - ret = rmi_read(hdev, query_offset, info); >> - if (ret) { >> - hid_err(hdev, "Can not read query42.\n"); >> - return ret; >> - } >> - has_ds4_queries = !!(info[0] & BIT(0)); >> - query_offset++; >> - } >> - >> - if (has_ds4_queries) { >> - ret = rmi_read(hdev, query_offset, &ds4_query_len); >> - if (ret) { >> - hid_err(hdev, "Can not read DS4 Query length.\n"); >> - return ret; >> - } >> - query_offset++; >> - >> - if (ds4_query_len > 0) { >> - ret = rmi_read(hdev, query_offset, info); >> - if (ret) { >> - hid_err(hdev, "Can not read DS4 query.\n"); >> - return ret; >> - } >> - >> - has_package_id_query = !!(info[0] & BIT(0)); >> - has_build_id_query = !!(info[0] & BIT(1)); >> - } >> - } >> - >> - if (has_package_id_query) >> - prod_info_addr++; >> - >> - if (has_build_id_query) { >> - ret = rmi_read_block(hdev, prod_info_addr, info, 3); >> - if (ret) { >> - hid_err(hdev, "Can not read product info.\n"); >> - return ret; >> - } >> - >> - data->firmware_id = info[1] << 8 | info[0]; >> - data->firmware_id += info[2] * 65536; >> - } >> - >> - ret = rmi_read_block(hdev, data->f01.control_base_addr, info, >> - 2); >> - >> - if (ret) { >> - hid_err(hdev, "can not read f01 ctrl registers\n"); >> - return ret; >> - } >> - >> - data->f01_ctrl0 = info[0]; >> - >> - if (!info[1]) { >> - /* >> - * Do to a firmware bug in some touchpads the F01 interrupt >> - * enable control register will be cleared on reset. >> - * This will stop the touchpad from reporting data, so >> - * if F01 CTRL1 is 0 then we need to explicitly enable >> - * interrupts for the functions we want data for. >> - */ >> - data->restore_interrupt_mask = true; >> - >> - ret = rmi_write(hdev, data->f01.control_base_addr + 1, >> - &data->interrupt_enable_mask); >> - if (ret) { >> - hid_err(hdev, "can not write to control reg 1: %d.\n", >> - ret); >> - return ret; >> - } >> - } >> - >> - return 0; >> -} >> - >> -static int rmi_populate_f11(struct hid_device *hdev) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - u8 buf[20]; >> - int ret; >> - bool has_query9; >> - bool has_query10 = false; >> - bool has_query11; >> - bool has_query12; >> - bool has_query27; >> - bool has_query28; >> - bool has_query36 = false; >> - bool has_physical_props; >> - bool has_gestures; >> - bool has_rel; >> - bool has_data40 = false; >> - bool has_dribble = false; >> - bool has_palm_detect = false; >> - unsigned x_size, y_size; >> - u16 query_offset; >> - >> - if (!data->f11.query_base_addr) { >> - hid_err(hdev, "No 2D sensor found, giving up.\n"); >> - return -ENODEV; >> - } >> - >> - /* query 0 contains some useful information */ >> - ret = rmi_read(hdev, data->f11.query_base_addr, buf); >> - if (ret) { >> - hid_err(hdev, "can not get query 0: %d.\n", ret); >> - return ret; >> - } >> - has_query9 = !!(buf[0] & BIT(3)); >> - has_query11 = !!(buf[0] & BIT(4)); >> - has_query12 = !!(buf[0] & BIT(5)); >> - has_query27 = !!(buf[0] & BIT(6)); >> - has_query28 = !!(buf[0] & BIT(7)); >> - >> - /* query 1 to get the max number of fingers */ >> - ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); >> - if (ret) { >> - hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); >> - return ret; >> - } >> - data->max_fingers = (buf[0] & 0x07) + 1; >> - if (data->max_fingers > 5) >> - data->max_fingers = 10; >> - >> - data->f11.report_size = data->max_fingers * 5 + >> - DIV_ROUND_UP(data->max_fingers, 4); >> - >> - if (!(buf[0] & BIT(4))) { >> - hid_err(hdev, "No absolute events, giving up.\n"); >> - return -ENODEV; >> - } >> - >> - has_rel = !!(buf[0] & BIT(3)); >> - has_gestures = !!(buf[0] & BIT(5)); >> - >> - ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf); >> - if (ret) { >> - hid_err(hdev, "can not get absolute data sources: %d.\n", ret); >> - return ret; >> - } >> - >> - has_dribble = !!(buf[0] & BIT(4)); >> - >> - /* >> - * At least 4 queries are guaranteed to be present in F11 >> - * +1 for query 5 which is present since absolute events are >> - * reported and +1 for query 12. >> - */ >> - query_offset = 6; >> - >> - if (has_rel) >> - ++query_offset; /* query 6 is present */ >> - >> - if (has_gestures) { >> - /* query 8 to find out if query 10 exists */ >> - ret = rmi_read(hdev, >> - data->f11.query_base_addr + query_offset + 1, buf); >> - if (ret) { >> - hid_err(hdev, "can not read gesture information: %d.\n", >> - ret); >> - return ret; >> - } >> - has_palm_detect = !!(buf[0] & BIT(0)); >> - has_query10 = !!(buf[0] & BIT(2)); >> - >> - query_offset += 2; /* query 7 and 8 are present */ >> - } >> - >> - if (has_query9) >> - ++query_offset; >> - >> - if (has_query10) >> - ++query_offset; >> - >> - if (has_query11) >> - ++query_offset; >> - >> - /* query 12 to know if the physical properties are reported */ >> - if (has_query12) { >> - ret = rmi_read(hdev, data->f11.query_base_addr >> - + query_offset, buf); >> - if (ret) { >> - hid_err(hdev, "can not get query 12: %d.\n", ret); >> - return ret; >> - } >> - has_physical_props = !!(buf[0] & BIT(5)); >> - >> - if (has_physical_props) { >> - query_offset += 1; >> - ret = rmi_read_block(hdev, >> - data->f11.query_base_addr >> - + query_offset, buf, 4); >> - if (ret) { >> - hid_err(hdev, "can not read query 15-18: %d.\n", >> - ret); >> - return ret; >> - } >> - >> - x_size = buf[0] | (buf[1] << 8); >> - y_size = buf[2] | (buf[3] << 8); >> - >> - data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); >> - data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); >> - >> - hid_info(hdev, "%s: size in mm: %d x %d\n", >> - __func__, data->x_size_mm, data->y_size_mm); >> - >> - /* >> - * query 15 - 18 contain the size of the sensor >> - * and query 19 - 26 contain bezel dimensions >> - */ >> - query_offset += 12; >> - } >> - } >> - >> - if (has_query27) >> - ++query_offset; >> - >> - if (has_query28) { >> - ret = rmi_read(hdev, data->f11.query_base_addr >> - + query_offset, buf); >> - if (ret) { >> - hid_err(hdev, "can not get query 28: %d.\n", ret); >> - return ret; >> - } >> - >> - has_query36 = !!(buf[0] & BIT(6)); >> - } >> - >> - if (has_query36) { >> - query_offset += 2; >> - ret = rmi_read(hdev, data->f11.query_base_addr >> - + query_offset, buf); >> - if (ret) { >> - hid_err(hdev, "can not get query 36: %d.\n", ret); >> - return ret; >> - } >> - >> - has_data40 = !!(buf[0] & BIT(5)); >> - } >> - >> - >> - if (has_data40) >> - data->f11.report_size += data->max_fingers * 2; >> - >> - ret = rmi_read_block(hdev, data->f11.control_base_addr, >> - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); >> - if (ret) { >> - hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret); >> - return ret; >> - } >> - >> - /* data->f11_ctrl_regs now contains valid register data */ >> - data->read_f11_ctrl_regs = true; >> - >> - data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8); >> - data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8); >> - >> - if (has_dribble) { >> - data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6); >> - ret = rmi_write(hdev, data->f11.control_base_addr, >> - data->f11_ctrl_regs); >> - if (ret) { >> - hid_err(hdev, "can not write to control reg 0: %d.\n", >> - ret); >> - return ret; >> - } >> - } >> - >> - if (has_palm_detect) { >> - data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0); >> - ret = rmi_write(hdev, data->f11.control_base_addr + 11, >> - &data->f11_ctrl_regs[11]); >> - if (ret) { >> - hid_err(hdev, "can not write to control reg 11: %d.\n", >> - ret); >> - return ret; >> - } >> - } >> - >> - return 0; >> -} >> - >> -static int rmi_populate_f30(struct hid_device *hdev) >> -{ >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - u8 buf[20]; >> - int ret; >> - bool has_gpio, has_led; >> - unsigned bytes_per_ctrl; >> - u8 ctrl2_addr; >> - int ctrl2_3_length; >> - int i; >> - >> - /* function F30 is for physical buttons */ >> - if (!data->f30.query_base_addr) { >> - hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); >> - return -ENODEV; >> - } >> - >> - ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); >> - if (ret) { >> - hid_err(hdev, "can not get F30 query registers: %d.\n", ret); >> + ret = rmi_reset_attn_mode(hdev); >> + if (ret) >> return ret; >> - } >> - >> - has_gpio = !!(buf[0] & BIT(3)); >> - has_led = !!(buf[0] & BIT(2)); >> - data->gpio_led_count = buf[1] & 0x1f; >> >> - /* retrieve ctrl 2 & 3 registers */ >> - bytes_per_ctrl = (data->gpio_led_count + 7) / 8; >> - /* Ctrl0 is present only if both has_gpio and has_led are set*/ >> - ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; >> - /* Ctrl1 is always be present */ >> - ctrl2_addr += bytes_per_ctrl; >> - ctrl2_3_length = 2 * bytes_per_ctrl; >> - >> - data->f30.report_size = bytes_per_ctrl; >> - >> - ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, >> - buf, ctrl2_3_length); >> + ret = rmi_driver_resume(rmi_dev); >> if (ret) { >> - hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", >> - ctrl2_3_length, ret); >> + hid_warn(hdev, "Failed to resume device: %d\n", ret); >> return ret; >> } >> >> - for (i = 0; i < data->gpio_led_count; i++) { >> - int byte_position = i >> 3; >> - int bit_position = i & 0x07; >> - u8 dir_byte = buf[byte_position]; >> - u8 data_byte = buf[byte_position + bytes_per_ctrl]; >> - bool dir = (dir_byte >> bit_position) & BIT(0); >> - bool dat = (data_byte >> bit_position) & BIT(0); >> - >> - if (dir == 0) { >> - /* input mode */ >> - if (dat) { >> - /* actual buttons have pull up resistor */ >> - data->button_count++; >> - set_bit(i, &data->button_mask); >> - set_bit(i, &data->button_state_mask); >> - } >> - } >> - >> - } >> - >> return 0; >> } >> +#endif /* CONFIG_PM */ >> >> -static int rmi_populate(struct hid_device *hdev) >> +static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr) >> { >> - struct rmi_data *data = hid_get_drvdata(hdev); >> - int ret; >> + struct rmi_data *data = container_of(xport, struct rmi_data, xport); >> + struct hid_device *hdev = data->hdev; >> >> - ret = rmi_scan_pdt(hdev); >> - if (ret) { >> - hid_err(hdev, "PDT scan failed with code %d.\n", ret); >> - return ret; >> - } >> - >> - ret = rmi_populate_f01(hdev); >> - if (ret) { >> - hid_err(hdev, "Error while initializing F01 (%d).\n", ret); >> - return ret; >> - } >> - >> - ret = rmi_populate_f11(hdev); >> - if (ret) { >> - hid_err(hdev, "Error while initializing F11 (%d).\n", ret); >> - return ret; >> - } >> - >> - if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) { >> - ret = rmi_populate_f30(hdev); >> - if (ret) >> - hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); >> - } >> - >> - return 0; >> + return rmi_reset_attn_mode(hdev); >> } >> >> static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) >> { >> struct rmi_data *data = hid_get_drvdata(hdev); >> struct input_dev *input = hi->input; >> - int ret; >> - int res_x, res_y, i; >> + int ret = 0; >> >> - data->input = input; >> + if (!(data->device_flags & RMI_DEVICE)) >> + return 0; >> + >> + data->xport.input = input; > This feels awkward. Why can't you rely on rmi to create the inputs and > just use a plain hidraw driver here? The Razer Blade 14's physical click buttons bypass RMI and get reported to the host as generic HID button reports. Since nothing is reported in the RMI registers there isn't a way to report button events in the rmi core. I originally had is implemented as you suggested, but sharing the input device from hid-rmi with the core seemed like the only way to get buttons and finger positions to be reported from the same input device for the RB14. >> >> hid_dbg(hdev, "Opening low level driver\n"); >> ret = hid_hw_open(hdev); >> if (ret) >> return ret; >> >> - if (!(data->device_flags & RMI_DEVICE)) >> - return 0; >> - >> /* Allow incoming hid reports */ >> hid_device_io_start(hdev); >> >> @@ -1216,40 +514,10 @@ static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) >> goto exit; >> } >> >> - ret = rmi_populate(hdev); >> - if (ret) >> - goto exit; >> - >> - hid_info(hdev, "firmware id: %ld\n", data->firmware_id); >> - >> - __set_bit(EV_ABS, input->evbit); >> - input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); >> - input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); >> - >> - if (data->x_size_mm && data->y_size_mm) { >> - res_x = (data->max_x - 1) / data->x_size_mm; >> - res_y = (data->max_y - 1) / data->y_size_mm; >> - >> - input_abs_set_res(input, ABS_MT_POSITION_X, res_x); >> - input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); >> - } >> - >> - input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); >> - input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); >> - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); >> - input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); >> - >> - ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); >> - if (ret < 0) >> + ret = rmi_register_transport_device(&data->xport); >> + if (ret < 0) { >> + dev_err(&hdev->dev, "failed to register transport driver\n"); >> goto exit; >> - >> - if (data->button_count) { >> - __set_bit(EV_KEY, input->evbit); >> - for (i = 0; i < data->button_count; i++) >> - __set_bit(BTN_LEFT + i, input->keybit); >> - >> - if (data->button_count == 1) >> - __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); >> } >> >> set_bit(RMI_STARTED, &data->flags); >> @@ -1298,6 +566,27 @@ static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, >> return 0; >> } >> >> +static struct rmi_2d_sensor_platform_data rmi_hid_2d_sensor_data = { >> + .sensor_type = rmi_sensor_touchpad, >> + .axis_align.flip_y = true, >> + .dribble = RMI_REG_STATE_OFF, > Thinking about the Dell XPS 13 Skylake. I think this one would benefit > from a dribble setting to ON. Do you have plan to add platform quirks? I figured we could create an enable dribble device flag and set it based on the PID in the device id table. If the list gets to big then we might want to consider enabling by default. The only down side of dribble packets is that the touchpad continues to interrupt for a second after fingers leave. >> + .palm_detect = RMI_REG_STATE_OFF, >> +}; >> + >> +static struct rmi_f30_data rmi_hid_f30_data = { >> +}; >> + >> +static struct rmi_device_platform_data rmi_hid_pdata = { >> + .sensor_pdata = &rmi_hid_2d_sensor_data, >> + .f30_data = &rmi_hid_f30_data, >> +}; >> + >> +static const struct rmi_transport_ops hid_rmi_ops = { >> + .write_block = rmi_hid_write_block, >> + .read_block = rmi_hid_read_block, >> + .reset = rmi_hid_reset, >> +}; >> + >> static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) >> { >> struct rmi_data *data = NULL; >> @@ -1312,6 +601,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) >> return -ENOMEM; >> >> INIT_WORK(&data->reset_work, rmi_reset_work); >> + INIT_WORK(&data->attn_work, rmi_attn_work); >> data->hdev = hdev; >> >> hid_set_drvdata(hdev, data); >> @@ -1359,34 +649,52 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) >> >> data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); >> if (!data->writeReport) { >> - ret = -ENOMEM; >> - return ret; >> + hid_err(hdev, "failed to allocate buffer for HID reports\n"); >> + return -ENOMEM; >> } >> >> data->readReport = data->writeReport + data->output_report_size; >> >> + data->attn_report_size = roundup_pow_of_two( >> + sizeof(struct rmi_attn_report) + >> + data->input_report_size); >> + >> + data->attn_report = devm_kzalloc(&hdev->dev, data->attn_report_size * 2, >> + GFP_KERNEL); >> + if (!data->attn_report) >> + return -ENOMEM; >> + >> + data->in_attn_report = (struct rmi_attn_report *) >> + ((u8 *)data->attn_report >> + + data->attn_report_size); >> + >> + ret = kfifo_alloc(&data->attn_report_fifo, data->attn_report_size * 8, >> + GFP_KERNEL); >> + if (ret) { >> + hid_err(hdev, "failed to allocate attn report fifo\n"); >> + return -ENOMEM; >> + } >> + >> init_waitqueue_head(&data->wait); >> >> mutex_init(&data->page_mutex); >> >> + if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) >> + rmi_hid_pdata.f30_data->disable = true; >> + >> + data->xport.dev = hdev->dev.parent; >> + data->xport.pdata = rmi_hid_pdata; >> + data->xport.proto_name = "hid"; >> + data->xport.ops = &hid_rmi_ops; >> + >> start: >> ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); >> if (ret) { >> hid_err(hdev, "hw start failed\n"); >> + kfifo_free(&data->attn_report_fifo); >> return ret; >> } >> >> - if ((data->device_flags & RMI_DEVICE) && >> - !test_bit(RMI_STARTED, &data->flags)) >> - /* >> - * The device maybe in the bootloader if rmi_input_configured >> - * failed to find F11 in the PDT. Print an error, but don't >> - * return an error from rmi_probe so that hidraw will be >> - * accessible from userspace. That way a userspace tool >> - * can be used to reload working firmware on the touchpad. >> - */ >> - hid_err(hdev, "Device failed to be properly configured\n"); >> - >> return 0; >> } >> >> @@ -1395,6 +703,10 @@ static void rmi_remove(struct hid_device *hdev) >> struct rmi_data *hdata = hid_get_drvdata(hdev); >> >> clear_bit(RMI_STARTED, &hdata->flags); >> + cancel_work_sync(&hdata->reset_work); >> + cancel_work_sync(&hdata->attn_work); >> + rmi_unregister_transport_device(&hdata->xport); >> + kfifo_free(&hdata->attn_report_fifo); >> >> hid_hw_stop(hdev); >> } >> @@ -1419,7 +731,7 @@ static struct hid_driver rmi_driver = { >> #ifdef CONFIG_PM >> .suspend = rmi_suspend, >> .resume = rmi_post_resume, >> - .reset_resume = rmi_post_reset, >> + .reset_resume = rmi_post_resume, >> #endif >> }; >> >> -- >> 2.5.0 >> > The rest looks OK. Thanks for reviewing. Andrew > Cheers, > Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/15/2016 02:41 AM, Benjamin Tissoires wrote: > On Jun 15 2016 or thereabouts, Jiri Kosina wrote: >> On Fri, 3 Jun 2016, Andrew Duggan wrote: >> >>> The Synaptics RMI4 driver provides support for RMI4 devices. Instead of >>> duplicating the RMI4 processing code, make hid-rmi a transport driver >>> and register it with the Synaptics RMI4 core. >>> >>> Signed-off-by: Andrew Duggan <aduggan@synaptics.com> >> Is there any update on the Input series please? > FWIW, I just reviewed it. Now the ball is in Dmitry's hand (I don't > think it needs a resubmission). Linus had some suggestions regarding the naming of the device tree properties in patch 3. I can either resubmit the series with those changes plus what Benjamin identified. Or I can resubmit the patch 3 as a standalone patch later so that the rest of the series can be applied. I'll do which ever option is less of a burden on the reviewers. Andrew > Cheers, > Benjamin > >> Thanks, >> >> -- >> Jiri Kosina >> SUSE Labs >> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 4117225..0520626 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -747,6 +747,9 @@ config HID_SUNPLUS config HID_RMI tristate "Synaptics RMI4 device support" depends on HID + select RMI4_CORE + select RMI4_F11 + select RMI4_F30 ---help--- Support for Synaptics RMI4 touchpads. Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c index 9cd2ca3..34ff9a2 100644 --- a/drivers/hid/hid-rmi.c +++ b/drivers/hid/hid-rmi.c @@ -19,6 +19,8 @@ #include <linux/slab.h> #include <linux/wait.h> #include <linux/sched.h> +#include <linux/kfifo.h> +#include <linux/rmi.h> #include "hid-ids.h" #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ @@ -33,9 +35,6 @@ #define RMI_READ_DATA_PENDING 1 #define RMI_STARTED 2 -#define RMI_SLEEP_NORMAL 0x0 -#define RMI_SLEEP_DEEP_SLEEP 0x1 - /* device flags */ #define RMI_DEVICE BIT(0) #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) @@ -54,18 +53,10 @@ enum rmi_mode_type { RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, }; -struct rmi_function { - unsigned page; /* page of the function */ - u16 query_base_addr; /* base address for queries */ - u16 command_base_addr; /* base address for commands */ - u16 control_base_addr; /* base address for controls */ - u16 data_base_addr; /* base address for datas */ - unsigned int interrupt_base; /* cross-function interrupt number - * (uniq in the device)*/ - unsigned int interrupt_count; /* number of interrupts */ - unsigned int report_size; /* size of a report */ - unsigned long irq_mask; /* mask of the interrupts - * (to be applied against ATTN IRQ) */ +/* Structure for storing attn report plus size of valid data in the kfifo */ +struct rmi_attn_report { + int size; + u8 data[]; }; /** @@ -84,26 +75,22 @@ struct rmi_function { * * @flags: flags for the current device (started, reading, etc...) * - * @f11: placeholder of internal RMI function F11 description - * @f30: placeholder of internal RMI function F30 description - * - * @max_fingers: maximum finger count reported by the device - * @max_x: maximum x value reported by the device - * @max_y: maximum y value reported by the device - * - * @gpio_led_count: count of GPIOs + LEDs reported by F30 - * @button_count: actual physical buttons count - * @button_mask: button mask used to decode GPIO ATTN reports - * @button_state_mask: pull state of the buttons - * - * @input: pointer to the kernel input device - * * @reset_work: worker which will be called in case of a mouse report + * @attn_work: worker used for processing attention reports * @hdev: pointer to the struct hid_device + * + * @device_flags: flags which describe the device + * + * @attn_report_fifo: Store attn reports for deferred processing by worker + * @attn_report_size: size of an input report plus the size int + * @attn_report: buffer for storing the attn report while it is being processes + * @in_attn_report: buffer for storing input report plus size before adding it + * to the fifo. */ struct rmi_data { struct mutex page_mutex; int page; + struct rmi_transport_dev xport; wait_queue_head_t wait; @@ -115,34 +102,16 @@ struct rmi_data { unsigned long flags; - struct rmi_function f01; - struct rmi_function f11; - struct rmi_function f30; - - unsigned int max_fingers; - unsigned int max_x; - unsigned int max_y; - unsigned int x_size_mm; - unsigned int y_size_mm; - bool read_f11_ctrl_regs; - u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT]; - - unsigned int gpio_led_count; - unsigned int button_count; - unsigned long button_mask; - unsigned long button_state_mask; - - struct input_dev *input; - struct work_struct reset_work; + struct work_struct attn_work; struct hid_device *hdev; unsigned long device_flags; - unsigned long firmware_id; - u8 f01_ctrl0; - u8 interrupt_enable_mask; - bool restore_interrupt_mask; + struct kfifo attn_report_fifo; + int attn_report_size; + struct rmi_attn_report *attn_report; + struct rmi_attn_report *in_attn_report; }; #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) @@ -214,10 +183,11 @@ static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) return ret; } -static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, - const int len) +static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr, + void *buf, size_t len) { - struct rmi_data *data = hid_get_drvdata(hdev); + struct rmi_data *data = container_of(xport, struct rmi_data, xport); + struct hid_device *hdev = data->hdev; int ret; int bytes_read; int bytes_needed; @@ -286,15 +256,11 @@ exit: return ret; } -static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) -{ - return rmi_read_block(hdev, addr, buf, 1); -} - -static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf, - const int len) +static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr, + const void *buf, size_t len) { - struct rmi_data *data = hid_get_drvdata(hdev); + struct rmi_data *data = container_of(xport, struct rmi_data, xport); + struct hid_device *hdev = data->hdev; int ret; mutex_lock(&data->page_mutex); @@ -326,62 +292,20 @@ exit: return ret; } -static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf) -{ - return rmi_write_block(hdev, addr, buf, 1); -} - -static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, - u8 finger_state, u8 *touch_data) -{ - int x, y, wx, wy; - int wide, major, minor; - int z; - - input_mt_slot(hdata->input, slot); - input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, - finger_state == 0x01); - if (finger_state == 0x01) { - x = (touch_data[0] << 4) | (touch_data[2] & 0x0F); - y = (touch_data[1] << 4) | (touch_data[2] >> 4); - wx = touch_data[3] & 0x0F; - wy = touch_data[3] >> 4; - wide = (wx > wy); - major = max(wx, wy); - minor = min(wx, wy); - z = touch_data[4]; - - /* y is inverted */ - y = hdata->max_y - y; - - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); - input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); - input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); - input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); - input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); - } -} - static int rmi_reset_attn_mode(struct hid_device *hdev) { struct rmi_data *data = hid_get_drvdata(hdev); + struct rmi_device *rmi_dev = data->xport.rmi_dev; int ret; ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); if (ret) return ret; - if (data->restore_interrupt_mask) { - ret = rmi_write(hdev, data->f01.control_base_addr + 1, - &data->interrupt_enable_mask); - if (ret) { - hid_err(hdev, "can not write F01 control register\n"); - return ret; - } - } + if (test_bit(RMI_STARTED, &data->flags)) + ret = rmi_dev->driver->reset_handler(rmi_dev); - return 0; + return ret; } static void rmi_reset_work(struct work_struct *work) @@ -393,102 +317,42 @@ static void rmi_reset_work(struct work_struct *work) rmi_reset_attn_mode(hdata->hdev); } -static inline int rmi_schedule_reset(struct hid_device *hdev) +static void rmi_attn_work(struct work_struct *work) { - struct rmi_data *hdata = hid_get_drvdata(hdev); - return schedule_work(&hdata->reset_work); -} - -static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, - int size) -{ - struct rmi_data *hdata = hid_get_drvdata(hdev); - int offset; - int i; - - if (!(irq & hdata->f11.irq_mask) || size <= 0) - return 0; - - offset = (hdata->max_fingers >> 2) + 1; - for (i = 0; i < hdata->max_fingers; i++) { - int fs_byte_position = i >> 2; - int fs_bit_position = (i & 0x3) << 1; - int finger_state = (data[fs_byte_position] >> fs_bit_position) & - 0x03; - int position = offset + 5 * i; - - if (position + 5 > size) { - /* partial report, go on with what we received */ - printk_once(KERN_WARNING - "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n", - dev_driver_string(&hdev->dev), - dev_name(&hdev->dev)); - hid_dbg(hdev, "Incomplete finger report\n"); - break; - } - - rmi_f11_process_touch(hdata, i, finger_state, &data[position]); - } - input_mt_sync_frame(hdata->input); - input_sync(hdata->input); - return hdata->f11.report_size; -} + struct rmi_data *hdata = container_of(work, struct rmi_data, + attn_work); + struct rmi_device *rmi_dev = hdata->xport.rmi_dev; + struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); + int ret; -static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, - int size) -{ - struct rmi_data *hdata = hid_get_drvdata(hdev); - int i; - int button = 0; - bool value; + ret = kfifo_out(&hdata->attn_report_fifo, hdata->attn_report, + hdata->attn_report_size); + if (ret != hdata->attn_report_size) + return; - if (!(irq & hdata->f30.irq_mask)) - return 0; + *(drvdata->irq_status) = hdata->attn_report->data[1]; + hdata->xport.attn_data = &hdata->attn_report->data[2]; + hdata->xport.attn_size = hdata->attn_report->size - 2; - if (size < (int)hdata->f30.report_size) { - hid_warn(hdev, "Click Button pressed, but the click data is missing\n"); - return 0; - } + rmi_process_interrupt_requests(rmi_dev); - for (i = 0; i < hdata->gpio_led_count; i++) { - if (test_bit(i, &hdata->button_mask)) { - value = (data[i / 8] >> (i & 0x07)) & BIT(0); - if (test_bit(i, &hdata->button_state_mask)) - value = !value; - input_event(hdata->input, EV_KEY, BTN_LEFT + button++, - value); - } - } - return hdata->f30.report_size; + if (!kfifo_is_empty(&hdata->attn_report_fifo)) + schedule_work(&hdata->attn_work); } static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) { struct rmi_data *hdata = hid_get_drvdata(hdev); - unsigned long irq_mask = 0; - unsigned index = 2; if (!(test_bit(RMI_STARTED, &hdata->flags))) return 0; - irq_mask |= hdata->f11.irq_mask; - irq_mask |= hdata->f30.irq_mask; - - if (data[1] & ~irq_mask) - hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n", - data[1] & ~irq_mask, __FILE__, __LINE__); - - if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { - index += rmi_f11_input_event(hdev, data[1], &data[index], - size - index); - index += rmi_f30_input_event(hdev, data[1], &data[index], - size - index); - } else { - index += rmi_f30_input_event(hdev, data[1], &data[index], - size - index); - index += rmi_f11_input_event(hdev, data[1], &data[index], - size - index); - } + hdata->in_attn_report->size = size; + memcpy(&hdata->in_attn_report->data, data, size); + + kfifo_in(&hdata->attn_report_fifo, hdata->in_attn_report, + hdata->attn_report_size); + schedule_work(&hdata->attn_work); return 1; } @@ -562,7 +426,7 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, return 1; } - rmi_schedule_reset(hdev); + schedule_work(&data->reset_work); return 1; } @@ -570,637 +434,71 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field, } #ifdef CONFIG_PM -static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode) -{ - struct rmi_data *data = hid_get_drvdata(hdev); - int ret; - u8 f01_ctrl0; - - f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode; - - ret = rmi_write(hdev, data->f01.control_base_addr, - &f01_ctrl0); - if (ret) { - hid_err(hdev, "can not write sleep mode\n"); - return ret; - } - - return 0; -} - static int rmi_suspend(struct hid_device *hdev, pm_message_t message) { struct rmi_data *data = hid_get_drvdata(hdev); - int ret; - u8 buf[RMI_F11_CTRL_REG_COUNT]; - - if (!(data->device_flags & RMI_DEVICE)) - return 0; - - ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, - RMI_F11_CTRL_REG_COUNT); - if (ret) - hid_warn(hdev, "can not read F11 control registers\n"); - else - memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT); - - - if (!device_may_wakeup(hdev->dev.parent)) - return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP); - - return 0; -} - -static int rmi_post_reset(struct hid_device *hdev) -{ - struct rmi_data *data = hid_get_drvdata(hdev); + struct rmi_device *rmi_dev = data->xport.rmi_dev; int ret; if (!(data->device_flags & RMI_DEVICE)) return 0; - ret = rmi_reset_attn_mode(hdev); + ret = rmi_driver_suspend(rmi_dev); if (ret) { - hid_err(hdev, "can not set rmi mode\n"); + hid_warn(hdev, "Failed to suspend device: %d\n", ret); return ret; } - if (data->read_f11_ctrl_regs) { - ret = rmi_write_block(hdev, data->f11.control_base_addr, - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); - if (ret) - hid_warn(hdev, - "can not write F11 control registers after reset\n"); - } - - if (!device_may_wakeup(hdev->dev.parent)) { - ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL); - if (ret) { - hid_err(hdev, "can not write sleep mode\n"); - return ret; - } - } - - return ret; + return 0; } static int rmi_post_resume(struct hid_device *hdev) { struct rmi_data *data = hid_get_drvdata(hdev); + struct rmi_device *rmi_dev = data->xport.rmi_dev; + int ret; if (!(data->device_flags & RMI_DEVICE)) return 0; - return rmi_reset_attn_mode(hdev); -} -#endif /* CONFIG_PM */ - -#define RMI4_MAX_PAGE 0xff -#define RMI4_PAGE_SIZE 0x0100 - -#define PDT_START_SCAN_LOCATION 0x00e9 -#define PDT_END_SCAN_LOCATION 0x0005 -#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) - -struct pdt_entry { - u8 query_base_addr:8; - u8 command_base_addr:8; - u8 control_base_addr:8; - u8 data_base_addr:8; - u8 interrupt_source_count:3; - u8 bits3and4:2; - u8 function_version:2; - u8 bit7:1; - u8 function_number:8; -} __attribute__((__packed__)); - -static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) -{ - return GENMASK(irq_count + irq_base - 1, irq_base); -} - -static void rmi_register_function(struct rmi_data *data, - struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) -{ - struct rmi_function *f = NULL; - u16 page_base = page << 8; - - switch (pdt_entry->function_number) { - case 0x01: - f = &data->f01; - break; - case 0x11: - f = &data->f11; - break; - case 0x30: - f = &data->f30; - break; - } - - if (f) { - f->page = page; - f->query_base_addr = page_base | pdt_entry->query_base_addr; - f->command_base_addr = page_base | pdt_entry->command_base_addr; - f->control_base_addr = page_base | pdt_entry->control_base_addr; - f->data_base_addr = page_base | pdt_entry->data_base_addr; - f->interrupt_base = interrupt_count; - f->interrupt_count = pdt_entry->interrupt_source_count; - f->irq_mask = rmi_gen_mask(f->interrupt_base, - f->interrupt_count); - data->interrupt_enable_mask |= f->irq_mask; - } -} - -static int rmi_scan_pdt(struct hid_device *hdev) -{ - struct rmi_data *data = hid_get_drvdata(hdev); - struct pdt_entry entry; - int page; - bool page_has_function; - int i; - int retval; - int interrupt = 0; - u16 page_start, pdt_start , pdt_end; - - hid_info(hdev, "Scanning PDT...\n"); - - for (page = 0; (page <= RMI4_MAX_PAGE); page++) { - page_start = RMI4_PAGE_SIZE * page; - pdt_start = page_start + PDT_START_SCAN_LOCATION; - pdt_end = page_start + PDT_END_SCAN_LOCATION; - - page_has_function = false; - for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { - retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); - if (retval) { - hid_err(hdev, - "Read of PDT entry at %#06x failed.\n", - i); - goto error_exit; - } - - if (RMI4_END_OF_PDT(entry.function_number)) - break; - - page_has_function = true; - - hid_info(hdev, "Found F%02X on page %#04x\n", - entry.function_number, page); - - rmi_register_function(data, &entry, page, interrupt); - interrupt += entry.interrupt_source_count; - } - - if (!page_has_function) - break; - } - - hid_info(hdev, "%s: Done with PDT scan.\n", __func__); - retval = 0; - -error_exit: - return retval; -} - -#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11 - -static int rmi_populate_f01(struct hid_device *hdev) -{ - struct rmi_data *data = hid_get_drvdata(hdev); - u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN]; - u8 info[3]; - int ret; - bool has_query42; - bool has_lts; - bool has_sensor_id; - bool has_ds4_queries = false; - bool has_build_id_query = false; - bool has_package_id_query = false; - u16 query_offset = data->f01.query_base_addr; - u16 prod_info_addr; - u8 ds4_query_len; - - ret = rmi_read_block(hdev, query_offset, basic_queries, - RMI_DEVICE_F01_BASIC_QUERY_LEN); - if (ret) { - hid_err(hdev, "Can not read basic queries from Function 0x1.\n"); - return ret; - } - - has_lts = !!(basic_queries[0] & BIT(2)); - has_sensor_id = !!(basic_queries[1] & BIT(3)); - has_query42 = !!(basic_queries[1] & BIT(7)); - - query_offset += 11; - prod_info_addr = query_offset + 6; - query_offset += 10; - - if (has_lts) - query_offset += 20; - - if (has_sensor_id) - query_offset++; - - if (has_query42) { - ret = rmi_read(hdev, query_offset, info); - if (ret) { - hid_err(hdev, "Can not read query42.\n"); - return ret; - } - has_ds4_queries = !!(info[0] & BIT(0)); - query_offset++; - } - - if (has_ds4_queries) { - ret = rmi_read(hdev, query_offset, &ds4_query_len); - if (ret) { - hid_err(hdev, "Can not read DS4 Query length.\n"); - return ret; - } - query_offset++; - - if (ds4_query_len > 0) { - ret = rmi_read(hdev, query_offset, info); - if (ret) { - hid_err(hdev, "Can not read DS4 query.\n"); - return ret; - } - - has_package_id_query = !!(info[0] & BIT(0)); - has_build_id_query = !!(info[0] & BIT(1)); - } - } - - if (has_package_id_query) - prod_info_addr++; - - if (has_build_id_query) { - ret = rmi_read_block(hdev, prod_info_addr, info, 3); - if (ret) { - hid_err(hdev, "Can not read product info.\n"); - return ret; - } - - data->firmware_id = info[1] << 8 | info[0]; - data->firmware_id += info[2] * 65536; - } - - ret = rmi_read_block(hdev, data->f01.control_base_addr, info, - 2); - - if (ret) { - hid_err(hdev, "can not read f01 ctrl registers\n"); - return ret; - } - - data->f01_ctrl0 = info[0]; - - if (!info[1]) { - /* - * Do to a firmware bug in some touchpads the F01 interrupt - * enable control register will be cleared on reset. - * This will stop the touchpad from reporting data, so - * if F01 CTRL1 is 0 then we need to explicitly enable - * interrupts for the functions we want data for. - */ - data->restore_interrupt_mask = true; - - ret = rmi_write(hdev, data->f01.control_base_addr + 1, - &data->interrupt_enable_mask); - if (ret) { - hid_err(hdev, "can not write to control reg 1: %d.\n", - ret); - return ret; - } - } - - return 0; -} - -static int rmi_populate_f11(struct hid_device *hdev) -{ - struct rmi_data *data = hid_get_drvdata(hdev); - u8 buf[20]; - int ret; - bool has_query9; - bool has_query10 = false; - bool has_query11; - bool has_query12; - bool has_query27; - bool has_query28; - bool has_query36 = false; - bool has_physical_props; - bool has_gestures; - bool has_rel; - bool has_data40 = false; - bool has_dribble = false; - bool has_palm_detect = false; - unsigned x_size, y_size; - u16 query_offset; - - if (!data->f11.query_base_addr) { - hid_err(hdev, "No 2D sensor found, giving up.\n"); - return -ENODEV; - } - - /* query 0 contains some useful information */ - ret = rmi_read(hdev, data->f11.query_base_addr, buf); - if (ret) { - hid_err(hdev, "can not get query 0: %d.\n", ret); - return ret; - } - has_query9 = !!(buf[0] & BIT(3)); - has_query11 = !!(buf[0] & BIT(4)); - has_query12 = !!(buf[0] & BIT(5)); - has_query27 = !!(buf[0] & BIT(6)); - has_query28 = !!(buf[0] & BIT(7)); - - /* query 1 to get the max number of fingers */ - ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); - if (ret) { - hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); - return ret; - } - data->max_fingers = (buf[0] & 0x07) + 1; - if (data->max_fingers > 5) - data->max_fingers = 10; - - data->f11.report_size = data->max_fingers * 5 + - DIV_ROUND_UP(data->max_fingers, 4); - - if (!(buf[0] & BIT(4))) { - hid_err(hdev, "No absolute events, giving up.\n"); - return -ENODEV; - } - - has_rel = !!(buf[0] & BIT(3)); - has_gestures = !!(buf[0] & BIT(5)); - - ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf); - if (ret) { - hid_err(hdev, "can not get absolute data sources: %d.\n", ret); - return ret; - } - - has_dribble = !!(buf[0] & BIT(4)); - - /* - * At least 4 queries are guaranteed to be present in F11 - * +1 for query 5 which is present since absolute events are - * reported and +1 for query 12. - */ - query_offset = 6; - - if (has_rel) - ++query_offset; /* query 6 is present */ - - if (has_gestures) { - /* query 8 to find out if query 10 exists */ - ret = rmi_read(hdev, - data->f11.query_base_addr + query_offset + 1, buf); - if (ret) { - hid_err(hdev, "can not read gesture information: %d.\n", - ret); - return ret; - } - has_palm_detect = !!(buf[0] & BIT(0)); - has_query10 = !!(buf[0] & BIT(2)); - - query_offset += 2; /* query 7 and 8 are present */ - } - - if (has_query9) - ++query_offset; - - if (has_query10) - ++query_offset; - - if (has_query11) - ++query_offset; - - /* query 12 to know if the physical properties are reported */ - if (has_query12) { - ret = rmi_read(hdev, data->f11.query_base_addr - + query_offset, buf); - if (ret) { - hid_err(hdev, "can not get query 12: %d.\n", ret); - return ret; - } - has_physical_props = !!(buf[0] & BIT(5)); - - if (has_physical_props) { - query_offset += 1; - ret = rmi_read_block(hdev, - data->f11.query_base_addr - + query_offset, buf, 4); - if (ret) { - hid_err(hdev, "can not read query 15-18: %d.\n", - ret); - return ret; - } - - x_size = buf[0] | (buf[1] << 8); - y_size = buf[2] | (buf[3] << 8); - - data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); - data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); - - hid_info(hdev, "%s: size in mm: %d x %d\n", - __func__, data->x_size_mm, data->y_size_mm); - - /* - * query 15 - 18 contain the size of the sensor - * and query 19 - 26 contain bezel dimensions - */ - query_offset += 12; - } - } - - if (has_query27) - ++query_offset; - - if (has_query28) { - ret = rmi_read(hdev, data->f11.query_base_addr - + query_offset, buf); - if (ret) { - hid_err(hdev, "can not get query 28: %d.\n", ret); - return ret; - } - - has_query36 = !!(buf[0] & BIT(6)); - } - - if (has_query36) { - query_offset += 2; - ret = rmi_read(hdev, data->f11.query_base_addr - + query_offset, buf); - if (ret) { - hid_err(hdev, "can not get query 36: %d.\n", ret); - return ret; - } - - has_data40 = !!(buf[0] & BIT(5)); - } - - - if (has_data40) - data->f11.report_size += data->max_fingers * 2; - - ret = rmi_read_block(hdev, data->f11.control_base_addr, - data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT); - if (ret) { - hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret); - return ret; - } - - /* data->f11_ctrl_regs now contains valid register data */ - data->read_f11_ctrl_regs = true; - - data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8); - data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8); - - if (has_dribble) { - data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6); - ret = rmi_write(hdev, data->f11.control_base_addr, - data->f11_ctrl_regs); - if (ret) { - hid_err(hdev, "can not write to control reg 0: %d.\n", - ret); - return ret; - } - } - - if (has_palm_detect) { - data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0); - ret = rmi_write(hdev, data->f11.control_base_addr + 11, - &data->f11_ctrl_regs[11]); - if (ret) { - hid_err(hdev, "can not write to control reg 11: %d.\n", - ret); - return ret; - } - } - - return 0; -} - -static int rmi_populate_f30(struct hid_device *hdev) -{ - struct rmi_data *data = hid_get_drvdata(hdev); - u8 buf[20]; - int ret; - bool has_gpio, has_led; - unsigned bytes_per_ctrl; - u8 ctrl2_addr; - int ctrl2_3_length; - int i; - - /* function F30 is for physical buttons */ - if (!data->f30.query_base_addr) { - hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); - return -ENODEV; - } - - ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); - if (ret) { - hid_err(hdev, "can not get F30 query registers: %d.\n", ret); + ret = rmi_reset_attn_mode(hdev); + if (ret) return ret; - } - - has_gpio = !!(buf[0] & BIT(3)); - has_led = !!(buf[0] & BIT(2)); - data->gpio_led_count = buf[1] & 0x1f; - /* retrieve ctrl 2 & 3 registers */ - bytes_per_ctrl = (data->gpio_led_count + 7) / 8; - /* Ctrl0 is present only if both has_gpio and has_led are set*/ - ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; - /* Ctrl1 is always be present */ - ctrl2_addr += bytes_per_ctrl; - ctrl2_3_length = 2 * bytes_per_ctrl; - - data->f30.report_size = bytes_per_ctrl; - - ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, - buf, ctrl2_3_length); + ret = rmi_driver_resume(rmi_dev); if (ret) { - hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", - ctrl2_3_length, ret); + hid_warn(hdev, "Failed to resume device: %d\n", ret); return ret; } - for (i = 0; i < data->gpio_led_count; i++) { - int byte_position = i >> 3; - int bit_position = i & 0x07; - u8 dir_byte = buf[byte_position]; - u8 data_byte = buf[byte_position + bytes_per_ctrl]; - bool dir = (dir_byte >> bit_position) & BIT(0); - bool dat = (data_byte >> bit_position) & BIT(0); - - if (dir == 0) { - /* input mode */ - if (dat) { - /* actual buttons have pull up resistor */ - data->button_count++; - set_bit(i, &data->button_mask); - set_bit(i, &data->button_state_mask); - } - } - - } - return 0; } +#endif /* CONFIG_PM */ -static int rmi_populate(struct hid_device *hdev) +static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr) { - struct rmi_data *data = hid_get_drvdata(hdev); - int ret; + struct rmi_data *data = container_of(xport, struct rmi_data, xport); + struct hid_device *hdev = data->hdev; - ret = rmi_scan_pdt(hdev); - if (ret) { - hid_err(hdev, "PDT scan failed with code %d.\n", ret); - return ret; - } - - ret = rmi_populate_f01(hdev); - if (ret) { - hid_err(hdev, "Error while initializing F01 (%d).\n", ret); - return ret; - } - - ret = rmi_populate_f11(hdev); - if (ret) { - hid_err(hdev, "Error while initializing F11 (%d).\n", ret); - return ret; - } - - if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) { - ret = rmi_populate_f30(hdev); - if (ret) - hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); - } - - return 0; + return rmi_reset_attn_mode(hdev); } static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) { struct rmi_data *data = hid_get_drvdata(hdev); struct input_dev *input = hi->input; - int ret; - int res_x, res_y, i; + int ret = 0; - data->input = input; + if (!(data->device_flags & RMI_DEVICE)) + return 0; + + data->xport.input = input; hid_dbg(hdev, "Opening low level driver\n"); ret = hid_hw_open(hdev); if (ret) return ret; - if (!(data->device_flags & RMI_DEVICE)) - return 0; - /* Allow incoming hid reports */ hid_device_io_start(hdev); @@ -1216,40 +514,10 @@ static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) goto exit; } - ret = rmi_populate(hdev); - if (ret) - goto exit; - - hid_info(hdev, "firmware id: %ld\n", data->firmware_id); - - __set_bit(EV_ABS, input->evbit); - input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); - - if (data->x_size_mm && data->y_size_mm) { - res_x = (data->max_x - 1) / data->x_size_mm; - res_y = (data->max_y - 1) / data->y_size_mm; - - input_abs_set_res(input, ABS_MT_POSITION_X, res_x); - input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); - } - - input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); - input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); - input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); - - ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); - if (ret < 0) + ret = rmi_register_transport_device(&data->xport); + if (ret < 0) { + dev_err(&hdev->dev, "failed to register transport driver\n"); goto exit; - - if (data->button_count) { - __set_bit(EV_KEY, input->evbit); - for (i = 0; i < data->button_count; i++) - __set_bit(BTN_LEFT + i, input->keybit); - - if (data->button_count == 1) - __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); } set_bit(RMI_STARTED, &data->flags); @@ -1298,6 +566,27 @@ static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, return 0; } +static struct rmi_2d_sensor_platform_data rmi_hid_2d_sensor_data = { + .sensor_type = rmi_sensor_touchpad, + .axis_align.flip_y = true, + .dribble = RMI_REG_STATE_OFF, + .palm_detect = RMI_REG_STATE_OFF, +}; + +static struct rmi_f30_data rmi_hid_f30_data = { +}; + +static struct rmi_device_platform_data rmi_hid_pdata = { + .sensor_pdata = &rmi_hid_2d_sensor_data, + .f30_data = &rmi_hid_f30_data, +}; + +static const struct rmi_transport_ops hid_rmi_ops = { + .write_block = rmi_hid_write_block, + .read_block = rmi_hid_read_block, + .reset = rmi_hid_reset, +}; + static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) { struct rmi_data *data = NULL; @@ -1312,6 +601,7 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) return -ENOMEM; INIT_WORK(&data->reset_work, rmi_reset_work); + INIT_WORK(&data->attn_work, rmi_attn_work); data->hdev = hdev; hid_set_drvdata(hdev, data); @@ -1359,34 +649,52 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); if (!data->writeReport) { - ret = -ENOMEM; - return ret; + hid_err(hdev, "failed to allocate buffer for HID reports\n"); + return -ENOMEM; } data->readReport = data->writeReport + data->output_report_size; + data->attn_report_size = roundup_pow_of_two( + sizeof(struct rmi_attn_report) + + data->input_report_size); + + data->attn_report = devm_kzalloc(&hdev->dev, data->attn_report_size * 2, + GFP_KERNEL); + if (!data->attn_report) + return -ENOMEM; + + data->in_attn_report = (struct rmi_attn_report *) + ((u8 *)data->attn_report + + data->attn_report_size); + + ret = kfifo_alloc(&data->attn_report_fifo, data->attn_report_size * 8, + GFP_KERNEL); + if (ret) { + hid_err(hdev, "failed to allocate attn report fifo\n"); + return -ENOMEM; + } + init_waitqueue_head(&data->wait); mutex_init(&data->page_mutex); + if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) + rmi_hid_pdata.f30_data->disable = true; + + data->xport.dev = hdev->dev.parent; + data->xport.pdata = rmi_hid_pdata; + data->xport.proto_name = "hid"; + data->xport.ops = &hid_rmi_ops; + start: ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); if (ret) { hid_err(hdev, "hw start failed\n"); + kfifo_free(&data->attn_report_fifo); return ret; } - if ((data->device_flags & RMI_DEVICE) && - !test_bit(RMI_STARTED, &data->flags)) - /* - * The device maybe in the bootloader if rmi_input_configured - * failed to find F11 in the PDT. Print an error, but don't - * return an error from rmi_probe so that hidraw will be - * accessible from userspace. That way a userspace tool - * can be used to reload working firmware on the touchpad. - */ - hid_err(hdev, "Device failed to be properly configured\n"); - return 0; } @@ -1395,6 +703,10 @@ static void rmi_remove(struct hid_device *hdev) struct rmi_data *hdata = hid_get_drvdata(hdev); clear_bit(RMI_STARTED, &hdata->flags); + cancel_work_sync(&hdata->reset_work); + cancel_work_sync(&hdata->attn_work); + rmi_unregister_transport_device(&hdata->xport); + kfifo_free(&hdata->attn_report_fifo); hid_hw_stop(hdev); } @@ -1419,7 +731,7 @@ static struct hid_driver rmi_driver = { #ifdef CONFIG_PM .suspend = rmi_suspend, .resume = rmi_post_resume, - .reset_resume = rmi_post_reset, + .reset_resume = rmi_post_resume, #endif };
The Synaptics RMI4 driver provides support for RMI4 devices. Instead of duplicating the RMI4 processing code, make hid-rmi a transport driver and register it with the Synaptics RMI4 core. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> --- Here is the updated version of the hid-rmi patch. This patch along with the series I just posted for rmi_core, provides all of the functionality currently present in hid-rmi. This patch does depend on the changes in the rmi_core patch series to build since it is setting fields in struct rmi_2d_sensor_platform_data which are added in that series. I can separate setting those fields into a separate patch if that helps with integrating between the input and HID trees. In addition to the core changes this version also adds a fifo so that attention reports are stored when the attn worker is processing a report. I also changes the Kconfig options since the previous patch. The previous version just added a dependency on RMI4_CORE. But, if you take a previous config with HID_RMI set and don't know to set RMI4_CORE, F11, and F30 users will end up with a touchpad which doesn't work. Thanks, Andrew drivers/hid/Kconfig | 3 + drivers/hid/hid-rmi.c | 962 +++++++------------------------------------------- 2 files changed, 140 insertions(+), 825 deletions(-)