| Message ID | 1465980527-19031-1-git-send-email-anand.jain@oracle.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, Jun 15, 2016 at 04:48:47PM +0800, Anand Jain wrote: > From: Anand Jain <Anand.Jain@oracle.com> > > The test does the following: > Initialize a RAID1 with some data > > Re-mount RAID1 degraded with _dev1_ and write up to > half of the FS capacity If test devices are big enough, this test consumes much longer test time. I tested with 15G scratch dev pool and this test ran ~200s on my 4vcpu 8G memory test vm. Is it possible to limit the file size or the device size used? So it won't grow with device size. I'm thinking about something like _scratch_mkfs_sized, but that doesn't work for dev pool. > Save md5sum checkpoint1 > > Re-mount healthy RAID1 > > Let balance re-silver. > Save md5sum checkpoint2 > > Re-mount RAID1 degraded with _dev2_ > Save md5sum checkpoint3 > > Verify if all three md5sum match > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > --- > v2: > add tmp= and its rm > add comments to why _reload_btrfs_ko is used > add missing put and test_mount at notrun exit > use echo instead of _fail when checkpoints are checked > .out updated to remove Silence.. > > tests/btrfs/123 | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/btrfs/123.out | 7 +++ > tests/btrfs/group | 1 + > 3 files changed, 177 insertions(+) > create mode 100755 tests/btrfs/123 > create mode 100644 tests/btrfs/123.out > > diff --git a/tests/btrfs/123 b/tests/btrfs/123 > new file mode 100755 > index 000000000000..33decfd1c434 > --- /dev/null > +++ b/tests/btrfs/123 > @@ -0,0 +1,169 @@ > +#! /bin/bash > +# FS QA Test 123 > +# > +# This test verify the RAID1 reconstruction on the reappeared > +# device. By using the following steps: > +# Initialize a RAID1 with some data > +# > +# Re-mount RAID1 degraded with dev2 missing and write up to > +# half of the FS capacity. > +# Save md5sum checkpoint1 > +# > +# Re-mount healthy RAID1 > +# > +# Let balance re-silver. > +# Save md5sum checkpoint2 > +# > +# Re-mount RAID1 degraded with dev1 missing > +# Save md5sum checkpoint3 > +# > +# Verify if all three checkpoints match > +# > +#--------------------------------------------------------------------- > +# Copyright (c) 2016 Oracle. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#--------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# real QA test starts here > + > +_supported_fs btrfs > +_supported_os Linux > +_require_scratch_nocheck Why don't check filesystem after test? A comment would be good if there's a good reason. Patch 6 needs it as well :) Thanks, Eryu > +_require_scratch_dev_pool 2 > + > +# the mounted test dir prevent btrfs unload, we need to unmount > +_test_unmount > +_require_btrfs_loadable > + > +_scratch_dev_pool_get 2 > + > +dev1=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > +dev2=`echo $SCRATCH_DEV_POOL | awk '{print $2}'` > + > +dev1_sz=`blockdev --getsize64 $dev1` > +dev2_sz=`blockdev --getsize64 $dev2` > +# get min of both > +max_fs_sz=`echo -e "$dev1_sz\n$dev2_sz" | sort | head -1` > +max_fs_sz=$(( max_fs_sz/2 )) > +if [ $max_fs_sz -gt 1000000 ]; then > + bs="1M" > + count=$(( max_fs_sz/1000000 )) > +else > + max_fs_sz=$(( max_fs_sz*2 )) > + _scratch_dev_pool_put > + _test_mount > + _notrun "Smallest dev size $max_fs_sz, Need at least 2M" > +fi > + > +echo >> $seqres.full > +echo "max_fs_sz=$max_fs_sz count=$count" >> $seqres.full > +echo "-----Initialize -----" >> $seqres.full > +_scratch_pool_mkfs "-mraid1 -draid1" >> $seqres.full 2>&1 > +_scratch_mount >> $seqres.full 2>&1 > +_run_btrfs_util_prog filesystem show > +dd if=/dev/zero of="$SCRATCH_MNT"/tf1 bs=$bs count=1 \ > + >>$seqres.full 2>&1 > +count=$(( count-- )) > +echo "unmount" >> $seqres.full > +echo "clean btrfs ko" >> $seqres.full > +_scratch_unmount > + > +# un-scan the btrfs devices > +_reload_btrfs_ko > + > + > +echo >> $seqres.full > +echo "-----Write degraded mount fill upto $max_fs_sz bytes-----" >> $seqres.full > +echo > +echo "Write data with degraded mount" > +# Since we didn't run dev scan, btrfs kernel does not know > +# about the dev2 > +# don't use _scratch_mount as we want to control > +# the device used for mounting. > + > +_mount -o degraded $dev1 $SCRATCH_MNT >>$seqres.full 2>&1 > +_run_btrfs_util_prog filesystem show > +dd if=/dev/zero of="$SCRATCH_MNT"/tf2 bs=$bs count=$count \ > + >>$seqres.full 2>&1 > +checkpoint1=`md5sum $SCRATCH_MNT/tf2` > +echo $checkpoint1 >> $seqres.full 2>&1 > +_scratch_unmount > +echo "unmount" >> $seqres.full > + > +echo >> $seqres.full > +echo "-----Mount normal-----" >> $seqres.full > +echo > +echo "Mount normal after balance" > +_run_btrfs_util_prog device scan > +_scratch_mount >> $seqres.full 2>&1 > +_run_btrfs_util_prog filesystem show > +echo >> $seqres.full > +_run_btrfs_util_prog balance start ${SCRATCH_MNT} > + > +checkpoint2=`md5sum $SCRATCH_MNT/tf2` > +echo $checkpoint2 >> $seqres.full 2>&1 > + > +echo >> $seqres.full > +echo "-----Mount degraded but with other dev -----" >> $seqres.full > +echo > +echo "Mount degraded but with other dev" > +_scratch_unmount > +# un-scan the btrfs devices > +_reload_btrfs_ko > +_mount -o degraded $dev2 $SCRATCH_MNT >>$seqres.full 2>&1 > +_run_btrfs_util_prog filesystem show > +checkpoint3=`md5sum $SCRATCH_MNT/tf2` > +echo $checkpoint3 >> $seqres.full 2>&1 > + > +if [ "$checkpoint1" != "$checkpoint2" ]; then > + echo $checkpoint1 > + echo $checkpoint2 > + echo "Inital sum does not match with after balance" > +fi > + > +if [ "$checkpoint1" != "$checkpoint3" ]; then > + echo $checkpoint1 > + echo $checkpoint3 > + echo "Inital sum does not match with data on dev2 written by balance" > +fi > + > +_scratch_dev_pool_put > +_test_mount > + > +status=0 > +exit > diff --git a/tests/btrfs/123.out b/tests/btrfs/123.out > new file mode 100644 > index 000000000000..1aa77036b55b > --- /dev/null > +++ b/tests/btrfs/123.out > @@ -0,0 +1,7 @@ > +QA output created by 123 > + > +Write data with degraded mount > + > +Mount normal after balance > + > +Mount degraded but with other dev > diff --git a/tests/btrfs/group b/tests/btrfs/group > index da0e27fa308d..1c4bfa8dbc96 100644 > --- a/tests/btrfs/group > +++ b/tests/btrfs/group > @@ -124,3 +124,4 @@ > 120 auto quick snapshot metadata > 121 auto quick snapshot qgroup > 122 auto quick snapshot qgroup > +123 auto replace > -- > 2.7.0 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/21/2016 09:31 PM, Eryu Guan wrote: > On Wed, Jun 15, 2016 at 04:48:47PM +0800, Anand Jain wrote: >> From: Anand Jain <Anand.Jain@oracle.com> >> >> The test does the following: >> Initialize a RAID1 with some data >> >> Re-mount RAID1 degraded with _dev1_ and write up to >> half of the FS capacity > > If test devices are big enough, this test consumes much longer test > time. I tested with 15G scratch dev pool and this test ran ~200s on my > 4vcpu 8G memory test vm. Right. Isn't that a good design? So that it gets tested differently on different HW config. ? However the test time can be reduced by using smaller vdisk. Thanks, Anand > Is it possible to limit the file size or the device size used? So it > won't grow with device size. I'm thinking about something like > _scratch_mkfs_sized, but that doesn't work for dev pool. > >> Save md5sum checkpoint1 >> >> Re-mount healthy RAID1 >> >> Let balance re-silver. >> Save md5sum checkpoint2 >> >> Re-mount RAID1 degraded with _dev2_ >> Save md5sum checkpoint3 >> >> Verify if all three md5sum match >> >> Signed-off-by: Anand Jain <anand.jain@oracle.com> >> --- >> v2: >> add tmp= and its rm >> add comments to why _reload_btrfs_ko is used >> add missing put and test_mount at notrun exit >> use echo instead of _fail when checkpoints are checked >> .out updated to remove Silence.. >> >> tests/btrfs/123 | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++ >> tests/btrfs/123.out | 7 +++ >> tests/btrfs/group | 1 + >> 3 files changed, 177 insertions(+) >> create mode 100755 tests/btrfs/123 >> create mode 100644 tests/btrfs/123.out >> >> diff --git a/tests/btrfs/123 b/tests/btrfs/123 >> new file mode 100755 >> index 000000000000..33decfd1c434 >> --- /dev/null >> +++ b/tests/btrfs/123 >> @@ -0,0 +1,169 @@ >> +#! /bin/bash >> +# FS QA Test 123 >> +# >> +# This test verify the RAID1 reconstruction on the reappeared >> +# device. By using the following steps: >> +# Initialize a RAID1 with some data >> +# >> +# Re-mount RAID1 degraded with dev2 missing and write up to >> +# half of the FS capacity. >> +# Save md5sum checkpoint1 >> +# >> +# Re-mount healthy RAID1 >> +# >> +# Let balance re-silver. >> +# Save md5sum checkpoint2 >> +# >> +# Re-mount RAID1 degraded with dev1 missing >> +# Save md5sum checkpoint3 >> +# >> +# Verify if all three checkpoints match >> +# >> +#--------------------------------------------------------------------- >> +# Copyright (c) 2016 Oracle. All Rights Reserved. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#--------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + cd / >> + rm -f $tmp.* >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter >> + >> +# remove previous $seqres.full before test >> +rm -f $seqres.full >> + >> +# real QA test starts here >> + >> +_supported_fs btrfs >> +_supported_os Linux >> +_require_scratch_nocheck > > Why don't check filesystem after test? A comment would be good if > there's a good reason. Patch 6 needs it as well :) > > Thanks, > Eryu > >> +_require_scratch_dev_pool 2 >> + >> +# the mounted test dir prevent btrfs unload, we need to unmount >> +_test_unmount >> +_require_btrfs_loadable >> + >> +_scratch_dev_pool_get 2 >> + >> +dev1=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` >> +dev2=`echo $SCRATCH_DEV_POOL | awk '{print $2}'` >> + >> +dev1_sz=`blockdev --getsize64 $dev1` >> +dev2_sz=`blockdev --getsize64 $dev2` >> +# get min of both >> +max_fs_sz=`echo -e "$dev1_sz\n$dev2_sz" | sort | head -1` >> +max_fs_sz=$(( max_fs_sz/2 )) >> +if [ $max_fs_sz -gt 1000000 ]; then >> + bs="1M" >> + count=$(( max_fs_sz/1000000 )) >> +else >> + max_fs_sz=$(( max_fs_sz*2 )) >> + _scratch_dev_pool_put >> + _test_mount >> + _notrun "Smallest dev size $max_fs_sz, Need at least 2M" >> +fi >> + >> +echo >> $seqres.full >> +echo "max_fs_sz=$max_fs_sz count=$count" >> $seqres.full >> +echo "-----Initialize -----" >> $seqres.full >> +_scratch_pool_mkfs "-mraid1 -draid1" >> $seqres.full 2>&1 >> +_scratch_mount >> $seqres.full 2>&1 >> +_run_btrfs_util_prog filesystem show >> +dd if=/dev/zero of="$SCRATCH_MNT"/tf1 bs=$bs count=1 \ >> + >>$seqres.full 2>&1 >> +count=$(( count-- )) >> +echo "unmount" >> $seqres.full >> +echo "clean btrfs ko" >> $seqres.full >> +_scratch_unmount >> + >> +# un-scan the btrfs devices >> +_reload_btrfs_ko >> + >> + >> +echo >> $seqres.full >> +echo "-----Write degraded mount fill upto $max_fs_sz bytes-----" >> $seqres.full >> +echo >> +echo "Write data with degraded mount" >> +# Since we didn't run dev scan, btrfs kernel does not know >> +# about the dev2 >> +# don't use _scratch_mount as we want to control >> +# the device used for mounting. >> + >> +_mount -o degraded $dev1 $SCRATCH_MNT >>$seqres.full 2>&1 >> +_run_btrfs_util_prog filesystem show >> +dd if=/dev/zero of="$SCRATCH_MNT"/tf2 bs=$bs count=$count \ >> + >>$seqres.full 2>&1 >> +checkpoint1=`md5sum $SCRATCH_MNT/tf2` >> +echo $checkpoint1 >> $seqres.full 2>&1 >> +_scratch_unmount >> +echo "unmount" >> $seqres.full >> + >> +echo >> $seqres.full >> +echo "-----Mount normal-----" >> $seqres.full >> +echo >> +echo "Mount normal after balance" >> +_run_btrfs_util_prog device scan >> +_scratch_mount >> $seqres.full 2>&1 >> +_run_btrfs_util_prog filesystem show >> +echo >> $seqres.full >> +_run_btrfs_util_prog balance start ${SCRATCH_MNT} >> + >> +checkpoint2=`md5sum $SCRATCH_MNT/tf2` >> +echo $checkpoint2 >> $seqres.full 2>&1 >> + >> +echo >> $seqres.full >> +echo "-----Mount degraded but with other dev -----" >> $seqres.full >> +echo >> +echo "Mount degraded but with other dev" >> +_scratch_unmount >> +# un-scan the btrfs devices >> +_reload_btrfs_ko >> +_mount -o degraded $dev2 $SCRATCH_MNT >>$seqres.full 2>&1 >> +_run_btrfs_util_prog filesystem show >> +checkpoint3=`md5sum $SCRATCH_MNT/tf2` >> +echo $checkpoint3 >> $seqres.full 2>&1 >> + >> +if [ "$checkpoint1" != "$checkpoint2" ]; then >> + echo $checkpoint1 >> + echo $checkpoint2 >> + echo "Inital sum does not match with after balance" >> +fi >> + >> +if [ "$checkpoint1" != "$checkpoint3" ]; then >> + echo $checkpoint1 >> + echo $checkpoint3 >> + echo "Inital sum does not match with data on dev2 written by balance" >> +fi >> + >> +_scratch_dev_pool_put >> +_test_mount >> + >> +status=0 >> +exit >> diff --git a/tests/btrfs/123.out b/tests/btrfs/123.out >> new file mode 100644 >> index 000000000000..1aa77036b55b >> --- /dev/null >> +++ b/tests/btrfs/123.out >> @@ -0,0 +1,7 @@ >> +QA output created by 123 >> + >> +Write data with degraded mount >> + >> +Mount normal after balance >> + >> +Mount degraded but with other dev >> diff --git a/tests/btrfs/group b/tests/btrfs/group >> index da0e27fa308d..1c4bfa8dbc96 100644 >> --- a/tests/btrfs/group >> +++ b/tests/btrfs/group >> @@ -124,3 +124,4 @@ >> 120 auto quick snapshot metadata >> 121 auto quick snapshot qgroup >> 122 auto quick snapshot qgroup >> +123 auto replace >> -- >> 2.7.0 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe fstests" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 22, 2016 at 07:01:54PM +0800, Anand Jain wrote: > > > On 06/21/2016 09:31 PM, Eryu Guan wrote: > > On Wed, Jun 15, 2016 at 04:48:47PM +0800, Anand Jain wrote: > > > From: Anand Jain <Anand.Jain@oracle.com> > > > > > > The test does the following: > > > Initialize a RAID1 with some data > > > > > > Re-mount RAID1 degraded with _dev1_ and write up to > > > half of the FS capacity > > > > If test devices are big enough, this test consumes much longer test > > time. I tested with 15G scratch dev pool and this test ran ~200s on my > > 4vcpu 8G memory test vm. > > Right. Isn't that a good design? So that it gets tested differently > on different HW config. ? Not in fstests. We should limit the run time of tests to an acceptable amount, for auto group it's within 5 minutes. > However the test time can be reduced by using smaller vdisk. I think either limit the write size or _notrun if the $max_fs_size is too big (say 30G). More comments below. > > Thanks, Anand > > > > Is it possible to limit the file size or the device size used? So it > > won't grow with device size. I'm thinking about something like > > _scratch_mkfs_sized, but that doesn't work for dev pool. > > > > > Save md5sum checkpoint1 > > > > > > Re-mount healthy RAID1 > > > > > > Let balance re-silver. > > > Save md5sum checkpoint2 > > > > > > Re-mount RAID1 degraded with _dev2_ > > > Save md5sum checkpoint3 > > > > > > Verify if all three md5sum match > > > > > > Signed-off-by: Anand Jain <anand.jain@oracle.com> > > > --- > > > v2: > > > add tmp= and its rm > > > add comments to why _reload_btrfs_ko is used > > > add missing put and test_mount at notrun exit > > > use echo instead of _fail when checkpoints are checked > > > .out updated to remove Silence.. > > > > > > tests/btrfs/123 | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > tests/btrfs/123.out | 7 +++ > > > tests/btrfs/group | 1 + > > > 3 files changed, 177 insertions(+) > > > create mode 100755 tests/btrfs/123 > > > create mode 100644 tests/btrfs/123.out > > > > > > diff --git a/tests/btrfs/123 b/tests/btrfs/123 > > > new file mode 100755 > > > index 000000000000..33decfd1c434 > > > --- /dev/null > > > +++ b/tests/btrfs/123 > > > @@ -0,0 +1,169 @@ > > > +#! /bin/bash > > > +# FS QA Test 123 > > > +# > > > +# This test verify the RAID1 reconstruction on the reappeared > > > +# device. By using the following steps: > > > +# Initialize a RAID1 with some data > > > +# > > > +# Re-mount RAID1 degraded with dev2 missing and write up to > > > +# half of the FS capacity. > > > +# Save md5sum checkpoint1 > > > +# > > > +# Re-mount healthy RAID1 > > > +# > > > +# Let balance re-silver. > > > +# Save md5sum checkpoint2 > > > +# > > > +# Re-mount RAID1 degraded with dev1 missing > > > +# Save md5sum checkpoint3 > > > +# > > > +# Verify if all three checkpoints match > > > +# > > > +#--------------------------------------------------------------------- > > > +# Copyright (c) 2016 Oracle. All Rights Reserved. > > > +# > > > +# This program is free software; you can redistribute it and/or > > > +# modify it under the terms of the GNU General Public License as > > > +# published by the Free Software Foundation. > > > +# > > > +# This program is distributed in the hope that it would be useful, > > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > > +# GNU General Public License for more details. > > > +# > > > +# You should have received a copy of the GNU General Public License > > > +# along with this program; if not, write the Free Software Foundation, > > > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > > +#--------------------------------------------------------------------- > > > +# > > > + > > > +seq=`basename $0` > > > +seqres=$RESULT_DIR/$seq > > > +echo "QA output created by $seq" > > > + > > > +here=`pwd` > > > +tmp=/tmp/$$ > > > +status=1 # failure is the default! > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > + > > > +_cleanup() > > > +{ > > > + cd / > > > + rm -f $tmp.* > > > +} > > > + > > > +# get standard environment, filters and checks > > > +. ./common/rc > > > +. ./common/filter > > > + > > > +# remove previous $seqres.full before test > > > +rm -f $seqres.full > > > + > > > +# real QA test starts here > > > + > > > +_supported_fs btrfs > > > +_supported_os Linux > > > +_require_scratch_nocheck > > > > Why don't check filesystem after test? A comment would be good if > > there's a good reason. Patch 6 needs it as well :) And can you please add comments on _require_scratch_nocheck in this patch and patch 6, and rebase the whole series after Dave pushed my pull request(on 06-25) to upstream, and resend? Thanks, Eryu > > > > > +_require_scratch_dev_pool 2 > > > + > > > +# the mounted test dir prevent btrfs unload, we need to unmount > > > +_test_unmount > > > +_require_btrfs_loadable > > > + > > > +_scratch_dev_pool_get 2 > > > + > > > +dev1=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` > > > +dev2=`echo $SCRATCH_DEV_POOL | awk '{print $2}'` > > > + > > > +dev1_sz=`blockdev --getsize64 $dev1` > > > +dev2_sz=`blockdev --getsize64 $dev2` > > > +# get min of both > > > +max_fs_sz=`echo -e "$dev1_sz\n$dev2_sz" | sort | head -1` > > > +max_fs_sz=$(( max_fs_sz/2 )) > > > +if [ $max_fs_sz -gt 1000000 ]; then > > > + bs="1M" > > > + count=$(( max_fs_sz/1000000 )) > > > +else > > > + max_fs_sz=$(( max_fs_sz*2 )) > > > + _scratch_dev_pool_put > > > + _test_mount > > > + _notrun "Smallest dev size $max_fs_sz, Need at least 2M" > > > +fi > > > + > > > +echo >> $seqres.full > > > +echo "max_fs_sz=$max_fs_sz count=$count" >> $seqres.full > > > +echo "-----Initialize -----" >> $seqres.full > > > +_scratch_pool_mkfs "-mraid1 -draid1" >> $seqres.full 2>&1 > > > +_scratch_mount >> $seqres.full 2>&1 > > > +_run_btrfs_util_prog filesystem show > > > +dd if=/dev/zero of="$SCRATCH_MNT"/tf1 bs=$bs count=1 \ > > > + >>$seqres.full 2>&1 > > > +count=$(( count-- )) > > > +echo "unmount" >> $seqres.full > > > +echo "clean btrfs ko" >> $seqres.full > > > +_scratch_unmount > > > + > > > +# un-scan the btrfs devices > > > +_reload_btrfs_ko > > > + > > > + > > > +echo >> $seqres.full > > > +echo "-----Write degraded mount fill upto $max_fs_sz bytes-----" >> $seqres.full > > > +echo > > > +echo "Write data with degraded mount" > > > +# Since we didn't run dev scan, btrfs kernel does not know > > > +# about the dev2 > > > +# don't use _scratch_mount as we want to control > > > +# the device used for mounting. > > > + > > > +_mount -o degraded $dev1 $SCRATCH_MNT >>$seqres.full 2>&1 > > > +_run_btrfs_util_prog filesystem show > > > +dd if=/dev/zero of="$SCRATCH_MNT"/tf2 bs=$bs count=$count \ > > > + >>$seqres.full 2>&1 > > > +checkpoint1=`md5sum $SCRATCH_MNT/tf2` > > > +echo $checkpoint1 >> $seqres.full 2>&1 > > > +_scratch_unmount > > > +echo "unmount" >> $seqres.full > > > + > > > +echo >> $seqres.full > > > +echo "-----Mount normal-----" >> $seqres.full > > > +echo > > > +echo "Mount normal after balance" > > > +_run_btrfs_util_prog device scan > > > +_scratch_mount >> $seqres.full 2>&1 > > > +_run_btrfs_util_prog filesystem show > > > +echo >> $seqres.full > > > +_run_btrfs_util_prog balance start ${SCRATCH_MNT} > > > + > > > +checkpoint2=`md5sum $SCRATCH_MNT/tf2` > > > +echo $checkpoint2 >> $seqres.full 2>&1 > > > + > > > +echo >> $seqres.full > > > +echo "-----Mount degraded but with other dev -----" >> $seqres.full > > > +echo > > > +echo "Mount degraded but with other dev" > > > +_scratch_unmount > > > +# un-scan the btrfs devices > > > +_reload_btrfs_ko > > > +_mount -o degraded $dev2 $SCRATCH_MNT >>$seqres.full 2>&1 > > > +_run_btrfs_util_prog filesystem show > > > +checkpoint3=`md5sum $SCRATCH_MNT/tf2` > > > +echo $checkpoint3 >> $seqres.full 2>&1 > > > + > > > +if [ "$checkpoint1" != "$checkpoint2" ]; then > > > + echo $checkpoint1 > > > + echo $checkpoint2 > > > + echo "Inital sum does not match with after balance" > > > +fi > > > + > > > +if [ "$checkpoint1" != "$checkpoint3" ]; then > > > + echo $checkpoint1 > > > + echo $checkpoint3 > > > + echo "Inital sum does not match with data on dev2 written by balance" > > > +fi > > > + > > > +_scratch_dev_pool_put > > > +_test_mount > > > + > > > +status=0 > > > +exit > > > diff --git a/tests/btrfs/123.out b/tests/btrfs/123.out > > > new file mode 100644 > > > index 000000000000..1aa77036b55b > > > --- /dev/null > > > +++ b/tests/btrfs/123.out > > > @@ -0,0 +1,7 @@ > > > +QA output created by 123 > > > + > > > +Write data with degraded mount > > > + > > > +Mount normal after balance > > > + > > > +Mount degraded but with other dev > > > diff --git a/tests/btrfs/group b/tests/btrfs/group > > > index da0e27fa308d..1c4bfa8dbc96 100644 > > > --- a/tests/btrfs/group > > > +++ b/tests/btrfs/group > > > @@ -124,3 +124,4 @@ > > > 120 auto quick snapshot metadata > > > 121 auto quick snapshot qgroup > > > 122 auto quick snapshot qgroup > > > +123 auto replace > > > -- > > > 2.7.0 > > > > > > -- > > > To unsubscribe from this list: send the line "unsubscribe fstests" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks for review comments. more below.. On 06/27/2016 05:29 PM, Eryu Guan wrote: > On Wed, Jun 22, 2016 at 07:01:54PM +0800, Anand Jain wrote: >> >> >> On 06/21/2016 09:31 PM, Eryu Guan wrote: >>> On Wed, Jun 15, 2016 at 04:48:47PM +0800, Anand Jain wrote: >>>> From: Anand Jain <Anand.Jain@oracle.com> >>>> >>>> The test does the following: >>>> Initialize a RAID1 with some data >>>> >>>> Re-mount RAID1 degraded with _dev1_ and write up to >>>> half of the FS capacity >>> >>> If test devices are big enough, this test consumes much longer test >>> time. I tested with 15G scratch dev pool and this test ran ~200s on my >>> 4vcpu 8G memory test vm. >> >> Right. Isn't that a good design? So that it gets tested differently >> on different HW config. ? > > Not in fstests. We should limit the run time of tests to an acceptable > amount, for auto group it's within 5 minutes. >> However the test time can be reduced by using smaller vdisk. > > I think either limit the write size or _notrun if the $max_fs_size is > too big (say 30G). Fixed in v3 to have a fixed scratch data. > More comments below. > >> >> Thanks, Anand >> >> >>> Is it possible to limit the file size or the device size used? So it >>> won't grow with device size. I'm thinking about something like >>> _scratch_mkfs_sized, but that doesn't work for dev pool. >>> >>>> Save md5sum checkpoint1 >>>> >>>> Re-mount healthy RAID1 >>>> >>>> Let balance re-silver. >>>> Save md5sum checkpoint2 >>>> >>>> Re-mount RAID1 degraded with _dev2_ >>>> Save md5sum checkpoint3 >>>> >>>> Verify if all three md5sum match >>>> >>>> Signed-off-by: Anand Jain <anand.jain@oracle.com> >>>> --- >>>> v2: >>>> add tmp= and its rm >>>> add comments to why _reload_btrfs_ko is used >>>> add missing put and test_mount at notrun exit >>>> use echo instead of _fail when checkpoints are checked >>>> .out updated to remove Silence.. >>>> >>>> tests/btrfs/123 | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++ >>>> tests/btrfs/123.out | 7 +++ >>>> tests/btrfs/group | 1 + >>>> 3 files changed, 177 insertions(+) >>>> create mode 100755 tests/btrfs/123 >>>> create mode 100644 tests/btrfs/123.out >>>> >>>> diff --git a/tests/btrfs/123 b/tests/btrfs/123 >>>> new file mode 100755 >>>> index 000000000000..33decfd1c434 >>>> --- /dev/null >>>> +++ b/tests/btrfs/123 >>>> @@ -0,0 +1,169 @@ >>>> +#! /bin/bash >>>> +# FS QA Test 123 >>>> +# >>>> +# This test verify the RAID1 reconstruction on the reappeared >>>> +# device. By using the following steps: >>>> +# Initialize a RAID1 with some data >>>> +# >>>> +# Re-mount RAID1 degraded with dev2 missing and write up to >>>> +# half of the FS capacity. >>>> +# Save md5sum checkpoint1 >>>> +# >>>> +# Re-mount healthy RAID1 >>>> +# >>>> +# Let balance re-silver. >>>> +# Save md5sum checkpoint2 >>>> +# >>>> +# Re-mount RAID1 degraded with dev1 missing >>>> +# Save md5sum checkpoint3 >>>> +# >>>> +# Verify if all three checkpoints match >>>> +# >>>> +#--------------------------------------------------------------------- >>>> +# Copyright (c) 2016 Oracle. All Rights Reserved. >>>> +# >>>> +# This program is free software; you can redistribute it and/or >>>> +# modify it under the terms of the GNU General Public License as >>>> +# published by the Free Software Foundation. >>>> +# >>>> +# This program is distributed in the hope that it would be useful, >>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>>> +# GNU General Public License for more details. >>>> +# >>>> +# You should have received a copy of the GNU General Public License >>>> +# along with this program; if not, write the Free Software Foundation, >>>> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >>>> +#--------------------------------------------------------------------- >>>> +# >>>> + >>>> +seq=`basename $0` >>>> +seqres=$RESULT_DIR/$seq >>>> +echo "QA output created by $seq" >>>> + >>>> +here=`pwd` >>>> +tmp=/tmp/$$ >>>> +status=1 # failure is the default! >>>> +trap "_cleanup; exit \$status" 0 1 2 3 15 >>>> + >>>> +_cleanup() >>>> +{ >>>> + cd / >>>> + rm -f $tmp.* >>>> +} >>>> + >>>> +# get standard environment, filters and checks >>>> +. ./common/rc >>>> +. ./common/filter >>>> + >>>> +# remove previous $seqres.full before test >>>> +rm -f $seqres.full >>>> + >>>> +# real QA test starts here >>>> + >>>> +_supported_fs btrfs >>>> +_supported_os Linux >>>> +_require_scratch_nocheck >>> >>> Why don't check filesystem after test? A comment would be good if >>> there's a good reason. Patch 6 needs it as well :) > > And can you please add comments on _require_scratch_nocheck in this > patch and patch 6, typo, ok to have fsck. > and rebase the whole series after Dave pushed my > pull request(on 06-25) to upstream, and resend? yep. Thanks, Anand > > Thanks, > Eryu > >>> >>>> +_require_scratch_dev_pool 2 >>>> + >>>> +# the mounted test dir prevent btrfs unload, we need to unmount >>>> +_test_unmount >>>> +_require_btrfs_loadable >>>> + >>>> +_scratch_dev_pool_get 2 >>>> + >>>> +dev1=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` >>>> +dev2=`echo $SCRATCH_DEV_POOL | awk '{print $2}'` >>>> + >>>> +dev1_sz=`blockdev --getsize64 $dev1` >>>> +dev2_sz=`blockdev --getsize64 $dev2` >>>> +# get min of both >>>> +max_fs_sz=`echo -e "$dev1_sz\n$dev2_sz" | sort | head -1` >>>> +max_fs_sz=$(( max_fs_sz/2 )) >>>> +if [ $max_fs_sz -gt 1000000 ]; then >>>> + bs="1M" >>>> + count=$(( max_fs_sz/1000000 )) >>>> +else >>>> + max_fs_sz=$(( max_fs_sz*2 )) >>>> + _scratch_dev_pool_put >>>> + _test_mount >>>> + _notrun "Smallest dev size $max_fs_sz, Need at least 2M" >>>> +fi >>>> + >>>> +echo >> $seqres.full >>>> +echo "max_fs_sz=$max_fs_sz count=$count" >> $seqres.full >>>> +echo "-----Initialize -----" >> $seqres.full >>>> +_scratch_pool_mkfs "-mraid1 -draid1" >> $seqres.full 2>&1 >>>> +_scratch_mount >> $seqres.full 2>&1 >>>> +_run_btrfs_util_prog filesystem show >>>> +dd if=/dev/zero of="$SCRATCH_MNT"/tf1 bs=$bs count=1 \ >>>> + >>$seqres.full 2>&1 >>>> +count=$(( count-- )) >>>> +echo "unmount" >> $seqres.full >>>> +echo "clean btrfs ko" >> $seqres.full >>>> +_scratch_unmount >>>> + >>>> +# un-scan the btrfs devices >>>> +_reload_btrfs_ko >>>> + >>>> + >>>> +echo >> $seqres.full >>>> +echo "-----Write degraded mount fill upto $max_fs_sz bytes-----" >> $seqres.full >>>> +echo >>>> +echo "Write data with degraded mount" >>>> +# Since we didn't run dev scan, btrfs kernel does not know >>>> +# about the dev2 >>>> +# don't use _scratch_mount as we want to control >>>> +# the device used for mounting. >>>> + >>>> +_mount -o degraded $dev1 $SCRATCH_MNT >>$seqres.full 2>&1 >>>> +_run_btrfs_util_prog filesystem show >>>> +dd if=/dev/zero of="$SCRATCH_MNT"/tf2 bs=$bs count=$count \ >>>> + >>$seqres.full 2>&1 >>>> +checkpoint1=`md5sum $SCRATCH_MNT/tf2` >>>> +echo $checkpoint1 >> $seqres.full 2>&1 >>>> +_scratch_unmount >>>> +echo "unmount" >> $seqres.full >>>> + >>>> +echo >> $seqres.full >>>> +echo "-----Mount normal-----" >> $seqres.full >>>> +echo >>>> +echo "Mount normal after balance" >>>> +_run_btrfs_util_prog device scan >>>> +_scratch_mount >> $seqres.full 2>&1 >>>> +_run_btrfs_util_prog filesystem show >>>> +echo >> $seqres.full >>>> +_run_btrfs_util_prog balance start ${SCRATCH_MNT} >>>> + >>>> +checkpoint2=`md5sum $SCRATCH_MNT/tf2` >>>> +echo $checkpoint2 >> $seqres.full 2>&1 >>>> + >>>> +echo >> $seqres.full >>>> +echo "-----Mount degraded but with other dev -----" >> $seqres.full >>>> +echo >>>> +echo "Mount degraded but with other dev" >>>> +_scratch_unmount >>>> +# un-scan the btrfs devices >>>> +_reload_btrfs_ko >>>> +_mount -o degraded $dev2 $SCRATCH_MNT >>$seqres.full 2>&1 >>>> +_run_btrfs_util_prog filesystem show >>>> +checkpoint3=`md5sum $SCRATCH_MNT/tf2` >>>> +echo $checkpoint3 >> $seqres.full 2>&1 >>>> + >>>> +if [ "$checkpoint1" != "$checkpoint2" ]; then >>>> + echo $checkpoint1 >>>> + echo $checkpoint2 >>>> + echo "Inital sum does not match with after balance" >>>> +fi >>>> + >>>> +if [ "$checkpoint1" != "$checkpoint3" ]; then >>>> + echo $checkpoint1 >>>> + echo $checkpoint3 >>>> + echo "Inital sum does not match with data on dev2 written by balance" >>>> +fi >>>> + >>>> +_scratch_dev_pool_put >>>> +_test_mount >>>> + >>>> +status=0 >>>> +exit >>>> diff --git a/tests/btrfs/123.out b/tests/btrfs/123.out >>>> new file mode 100644 >>>> index 000000000000..1aa77036b55b >>>> --- /dev/null >>>> +++ b/tests/btrfs/123.out >>>> @@ -0,0 +1,7 @@ >>>> +QA output created by 123 >>>> + >>>> +Write data with degraded mount >>>> + >>>> +Mount normal after balance >>>> + >>>> +Mount degraded but with other dev >>>> diff --git a/tests/btrfs/group b/tests/btrfs/group >>>> index da0e27fa308d..1c4bfa8dbc96 100644 >>>> --- a/tests/btrfs/group >>>> +++ b/tests/btrfs/group >>>> @@ -124,3 +124,4 @@ >>>> 120 auto quick snapshot metadata >>>> 121 auto quick snapshot qgroup >>>> 122 auto quick snapshot qgroup >>>> +123 auto replace >>>> -- >>>> 2.7.0 >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe fstests" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 30, 2016 at 07:04:06PM +0800, Anand Jain wrote: > > > Thanks for review comments. > more below.. > > On 06/27/2016 05:29 PM, Eryu Guan wrote: > > On Wed, Jun 22, 2016 at 07:01:54PM +0800, Anand Jain wrote: > > > > > > > > > On 06/21/2016 09:31 PM, Eryu Guan wrote: > > > > On Wed, Jun 15, 2016 at 04:48:47PM +0800, Anand Jain wrote: > > > > > From: Anand Jain <Anand.Jain@oracle.com> > > > > > > > > > > The test does the following: > > > > > Initialize a RAID1 with some data > > > > > > > > > > Re-mount RAID1 degraded with _dev1_ and write up to > > > > > half of the FS capacity > > > > > > > > If test devices are big enough, this test consumes much longer test > > > > time. I tested with 15G scratch dev pool and this test ran ~200s on my > > > > 4vcpu 8G memory test vm. > > > > > > Right. Isn't that a good design? So that it gets tested differently > > > on different HW config. ? > > > > Not in fstests. We should limit the run time of tests to an acceptable > > amount, for auto group it's within 5 minutes. > > > > However the test time can be reduced by using smaller vdisk. > > > > I think either limit the write size or _notrun if the $max_fs_size is > > too big (say 30G). > > Fixed in v3 to have a fixed scratch data. Thanks! I've queued this patchset up, will let them go through some testings. Thanks, Eryu -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/btrfs/123 b/tests/btrfs/123 new file mode 100755 index 000000000000..33decfd1c434 --- /dev/null +++ b/tests/btrfs/123 @@ -0,0 +1,169 @@ +#! /bin/bash +# FS QA Test 123 +# +# This test verify the RAID1 reconstruction on the reappeared +# device. By using the following steps: +# Initialize a RAID1 with some data +# +# Re-mount RAID1 degraded with dev2 missing and write up to +# half of the FS capacity. +# Save md5sum checkpoint1 +# +# Re-mount healthy RAID1 +# +# Let balance re-silver. +# Save md5sum checkpoint2 +# +# Re-mount RAID1 degraded with dev1 missing +# Save md5sum checkpoint3 +# +# Verify if all three checkpoints match +# +#--------------------------------------------------------------------- +# Copyright (c) 2016 Oracle. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#--------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs btrfs +_supported_os Linux +_require_scratch_nocheck +_require_scratch_dev_pool 2 + +# the mounted test dir prevent btrfs unload, we need to unmount +_test_unmount +_require_btrfs_loadable + +_scratch_dev_pool_get 2 + +dev1=`echo $SCRATCH_DEV_POOL | awk '{print $1}'` +dev2=`echo $SCRATCH_DEV_POOL | awk '{print $2}'` + +dev1_sz=`blockdev --getsize64 $dev1` +dev2_sz=`blockdev --getsize64 $dev2` +# get min of both +max_fs_sz=`echo -e "$dev1_sz\n$dev2_sz" | sort | head -1` +max_fs_sz=$(( max_fs_sz/2 )) +if [ $max_fs_sz -gt 1000000 ]; then + bs="1M" + count=$(( max_fs_sz/1000000 )) +else + max_fs_sz=$(( max_fs_sz*2 )) + _scratch_dev_pool_put + _test_mount + _notrun "Smallest dev size $max_fs_sz, Need at least 2M" +fi + +echo >> $seqres.full +echo "max_fs_sz=$max_fs_sz count=$count" >> $seqres.full +echo "-----Initialize -----" >> $seqres.full +_scratch_pool_mkfs "-mraid1 -draid1" >> $seqres.full 2>&1 +_scratch_mount >> $seqres.full 2>&1 +_run_btrfs_util_prog filesystem show +dd if=/dev/zero of="$SCRATCH_MNT"/tf1 bs=$bs count=1 \ + >>$seqres.full 2>&1 +count=$(( count-- )) +echo "unmount" >> $seqres.full +echo "clean btrfs ko" >> $seqres.full +_scratch_unmount + +# un-scan the btrfs devices +_reload_btrfs_ko + + +echo >> $seqres.full +echo "-----Write degraded mount fill upto $max_fs_sz bytes-----" >> $seqres.full +echo +echo "Write data with degraded mount" +# Since we didn't run dev scan, btrfs kernel does not know +# about the dev2 +# don't use _scratch_mount as we want to control +# the device used for mounting. + +_mount -o degraded $dev1 $SCRATCH_MNT >>$seqres.full 2>&1 +_run_btrfs_util_prog filesystem show +dd if=/dev/zero of="$SCRATCH_MNT"/tf2 bs=$bs count=$count \ + >>$seqres.full 2>&1 +checkpoint1=`md5sum $SCRATCH_MNT/tf2` +echo $checkpoint1 >> $seqres.full 2>&1 +_scratch_unmount +echo "unmount" >> $seqres.full + +echo >> $seqres.full +echo "-----Mount normal-----" >> $seqres.full +echo +echo "Mount normal after balance" +_run_btrfs_util_prog device scan +_scratch_mount >> $seqres.full 2>&1 +_run_btrfs_util_prog filesystem show +echo >> $seqres.full +_run_btrfs_util_prog balance start ${SCRATCH_MNT} + +checkpoint2=`md5sum $SCRATCH_MNT/tf2` +echo $checkpoint2 >> $seqres.full 2>&1 + +echo >> $seqres.full +echo "-----Mount degraded but with other dev -----" >> $seqres.full +echo +echo "Mount degraded but with other dev" +_scratch_unmount +# un-scan the btrfs devices +_reload_btrfs_ko +_mount -o degraded $dev2 $SCRATCH_MNT >>$seqres.full 2>&1 +_run_btrfs_util_prog filesystem show +checkpoint3=`md5sum $SCRATCH_MNT/tf2` +echo $checkpoint3 >> $seqres.full 2>&1 + +if [ "$checkpoint1" != "$checkpoint2" ]; then + echo $checkpoint1 + echo $checkpoint2 + echo "Inital sum does not match with after balance" +fi + +if [ "$checkpoint1" != "$checkpoint3" ]; then + echo $checkpoint1 + echo $checkpoint3 + echo "Inital sum does not match with data on dev2 written by balance" +fi + +_scratch_dev_pool_put +_test_mount + +status=0 +exit diff --git a/tests/btrfs/123.out b/tests/btrfs/123.out new file mode 100644 index 000000000000..1aa77036b55b --- /dev/null +++ b/tests/btrfs/123.out @@ -0,0 +1,7 @@ +QA output created by 123 + +Write data with degraded mount + +Mount normal after balance + +Mount degraded but with other dev diff --git a/tests/btrfs/group b/tests/btrfs/group index da0e27fa308d..1c4bfa8dbc96 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -124,3 +124,4 @@ 120 auto quick snapshot metadata 121 auto quick snapshot qgroup 122 auto quick snapshot qgroup +123 auto replace