| Message ID | 1466667400-21639-1-git-send-email-wangxg.fnst@cn.fujitsu.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jun 23, 2016 at 03:36:40PM +0800, Wang Xiaoguang wrote: > In btrfs, when truncate operation fails for enospc reason, file may still > have some disk blocks, but it will fail to update filesize accordingly. > > Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> > --- > tests/btrfs/124 | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/btrfs/124.out | 2 ++ > tests/btrfs/group | 1 + > 3 files changed, 89 insertions(+) > create mode 100755 tests/btrfs/124 > create mode 100644 tests/btrfs/124.out > > diff --git a/tests/btrfs/124 b/tests/btrfs/124 > new file mode 100755 > index 0000000..1a13ddf > --- /dev/null > +++ b/tests/btrfs/124 > @@ -0,0 +1,86 @@ > +#! /bin/bash > +# FS QA Test 124 > +# > +# Test whether truncate can update file size correctly when truncate fails > +# > +# When truncate operation fails for enospc reason, file will still > +# have some disk blocks, but it will fail to update filesize accordingly. > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2016 Fujitsu. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/reflink > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# Modify as appropriate. > +_supported_fs generic > +_supported_os Linux > +_supported_fs btrfs Two "_supported_fs" here. And I don't see any other btrfs-specific configs except MKFS_OPTIONS, is it possible to make it a generic test? > +_require_scratch_reflink > + > +MKFS_OPTIONS="-O ^mixed-bg" Need comments on why testing with this MKFS_OPTIONS. > +_scratch_mkfs_sized $((101 * 1024 * 1024)) >> $seqres.full 2>&1 101M is too small to make btrfs on ppc64 host for me. > +_scratch_mount > + > +blocksize=$((128 * 1024)) > +file="$SCRATCH_MNT/testfile" > +filesize=$((12 * 1024 * 1024 * 1024)) Comments on these numbers picked would be good, i.e. why 128k blocksize, why 12M filesize. Any special reason or just good enough for the test? > +nr=$((filesize / blocksize)) > + > +# write the initial block for later reflink > +_pwrite_byte 0xcdcdcdcd 0 $blocksize $file > /dev/null > + > +# use reflink to create the rest of the file, whose all extents are all > +# pointing to the first extent > +for ((i = 1; i < $nr; i++)); do > + _reflink_range $file 0 $file $(($i * $blocksize)) $blocksize > /dev/null > +done It's not clear to me in test description that why reflink is needed in this test. Perhaps test description and comments above can be updated to reflect the purpose of reflink? > + > +$XFS_IO_PROG -f -c "truncate 0" $file > /dev/null 2>&1 > +disk_usage=`du $file | $AWK_PROG '{print $1}'` > +new_filesize=`ls -l $file | $AWK_PROG '{print $5}'` I think "stat -c %s $file" is much easier :) > +if [ $disk_usage -gt 0 ] && [ $new_filesize -eq 0 ]; then > + echo "after truncate, file size is 0, but file still owns disk blocks" > + status=1 > + exit > +fi > + > +echo "Silence is golden" > +# success, all done > +status=0 > +exit > diff --git a/tests/btrfs/124.out b/tests/btrfs/124.out > new file mode 100644 > index 0000000..d7339e6 > --- /dev/null > +++ b/tests/btrfs/124.out > @@ -0,0 +1,2 @@ > +QA output created by 124 > +Silence is golden > diff --git a/tests/btrfs/group b/tests/btrfs/group > index 5a26ed7..8b5050e 100644 > --- a/tests/btrfs/group > +++ b/tests/btrfs/group > @@ -126,3 +126,4 @@ > 121 auto quick snapshot qgroup > 122 auto quick snapshot qgroup > 123 auto quick qgroup > +124 auto quick metadata Add it to 'clone' group as well? Thanks, Eryu -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 23, 2016 at 03:36:40PM +0800, Wang Xiaoguang wrote: > In btrfs, when truncate operation fails for enospc reason, file may still > have some disk blocks, but it will fail to update filesize accordingly. Any reason this isn't a generic test? Seems nothing in the test case really is btrfs specific. -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
hello, Thanks for your comments. I will update the patch according to your comments and make it to generic tests. Regards, Xiaoguang Wang On 06/23/2016 04:27 PM, Eryu Guan wrote: > On Thu, Jun 23, 2016 at 03:36:40PM +0800, Wang Xiaoguang wrote: >> In btrfs, when truncate operation fails for enospc reason, file may still >> have some disk blocks, but it will fail to update filesize accordingly. >> >> Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> >> --- >> tests/btrfs/124 | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++ >> tests/btrfs/124.out | 2 ++ >> tests/btrfs/group | 1 + >> 3 files changed, 89 insertions(+) >> create mode 100755 tests/btrfs/124 >> create mode 100644 tests/btrfs/124.out >> >> diff --git a/tests/btrfs/124 b/tests/btrfs/124 >> new file mode 100755 >> index 0000000..1a13ddf >> --- /dev/null >> +++ b/tests/btrfs/124 >> @@ -0,0 +1,86 @@ >> +#! /bin/bash >> +# FS QA Test 124 >> +# >> +# Test whether truncate can update file size correctly when truncate fails >> +# >> +# When truncate operation fails for enospc reason, file will still >> +# have some disk blocks, but it will fail to update filesize accordingly. >> +# >> +#----------------------------------------------------------------------- >> +# Copyright (c) 2016 Fujitsu. All Rights Reserved. >> +# >> +# This program is free software; you can redistribute it and/or >> +# modify it under the terms of the GNU General Public License as >> +# published by the Free Software Foundation. >> +# >> +# This program is distributed in the hope that it would be useful, >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +# GNU General Public License for more details. >> +# >> +# You should have received a copy of the GNU General Public License >> +# along with this program; if not, write the Free Software Foundation, >> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA >> +#----------------------------------------------------------------------- >> +# >> + >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + cd / >> + rm -f $tmp.* >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter >> +. ./common/reflink >> + >> +# remove previous $seqres.full before test >> +rm -f $seqres.full >> + >> +# Modify as appropriate. >> +_supported_fs generic >> +_supported_os Linux >> +_supported_fs btrfs > Two "_supported_fs" here. > > And I don't see any other btrfs-specific configs except MKFS_OPTIONS, is > it possible to make it a generic test? > >> +_require_scratch_reflink >> + >> +MKFS_OPTIONS="-O ^mixed-bg" > Need comments on why testing with this MKFS_OPTIONS. > >> +_scratch_mkfs_sized $((101 * 1024 * 1024)) >> $seqres.full 2>&1 > 101M is too small to make btrfs on ppc64 host for me. > >> +_scratch_mount >> + >> +blocksize=$((128 * 1024)) >> +file="$SCRATCH_MNT/testfile" >> +filesize=$((12 * 1024 * 1024 * 1024)) > Comments on these numbers picked would be good, i.e. why 128k blocksize, > why 12M filesize. Any special reason or just good enough for the test? > >> +nr=$((filesize / blocksize)) >> + >> +# write the initial block for later reflink >> +_pwrite_byte 0xcdcdcdcd 0 $blocksize $file > /dev/null >> + >> +# use reflink to create the rest of the file, whose all extents are all >> +# pointing to the first extent >> +for ((i = 1; i < $nr; i++)); do >> + _reflink_range $file 0 $file $(($i * $blocksize)) $blocksize > /dev/null >> +done > It's not clear to me in test description that why reflink is needed in > this test. Perhaps test description and comments above can be updated to > reflect the purpose of reflink? > >> + >> +$XFS_IO_PROG -f -c "truncate 0" $file > /dev/null 2>&1 >> +disk_usage=`du $file | $AWK_PROG '{print $1}'` >> +new_filesize=`ls -l $file | $AWK_PROG '{print $5}'` > I think "stat -c %s $file" is much easier :) > >> +if [ $disk_usage -gt 0 ] && [ $new_filesize -eq 0 ]; then >> + echo "after truncate, file size is 0, but file still owns disk blocks" >> + status=1 >> + exit >> +fi >> + >> +echo "Silence is golden" >> +# success, all done >> +status=0 >> +exit >> diff --git a/tests/btrfs/124.out b/tests/btrfs/124.out >> new file mode 100644 >> index 0000000..d7339e6 >> --- /dev/null >> +++ b/tests/btrfs/124.out >> @@ -0,0 +1,2 @@ >> +QA output created by 124 >> +Silence is golden >> diff --git a/tests/btrfs/group b/tests/btrfs/group >> index 5a26ed7..8b5050e 100644 >> --- a/tests/btrfs/group >> +++ b/tests/btrfs/group >> @@ -126,3 +126,4 @@ >> 121 auto quick snapshot qgroup >> 122 auto quick snapshot qgroup >> 123 auto quick qgroup >> +124 auto quick metadata > Add it to 'clone' group as well? > > Thanks, > Eryu > > -- To unsubscribe from this list: send the line "unsubscribe fstests" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/tests/btrfs/124 b/tests/btrfs/124 new file mode 100755 index 0000000..1a13ddf --- /dev/null +++ b/tests/btrfs/124 @@ -0,0 +1,86 @@ +#! /bin/bash +# FS QA Test 124 +# +# Test whether truncate can update file size correctly when truncate fails +# +# When truncate operation fails for enospc reason, file will still +# have some disk blocks, but it will fail to update filesize accordingly. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016 Fujitsu. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink + +# remove previous $seqres.full before test +rm -f $seqres.full + +# Modify as appropriate. +_supported_fs generic +_supported_os Linux +_supported_fs btrfs +_require_scratch_reflink + +MKFS_OPTIONS="-O ^mixed-bg" +_scratch_mkfs_sized $((101 * 1024 * 1024)) >> $seqres.full 2>&1 +_scratch_mount + +blocksize=$((128 * 1024)) +file="$SCRATCH_MNT/testfile" +filesize=$((12 * 1024 * 1024 * 1024)) +nr=$((filesize / blocksize)) + +# write the initial block for later reflink +_pwrite_byte 0xcdcdcdcd 0 $blocksize $file > /dev/null + +# use reflink to create the rest of the file, whose all extents are all +# pointing to the first extent +for ((i = 1; i < $nr; i++)); do + _reflink_range $file 0 $file $(($i * $blocksize)) $blocksize > /dev/null +done + +$XFS_IO_PROG -f -c "truncate 0" $file > /dev/null 2>&1 +disk_usage=`du $file | $AWK_PROG '{print $1}'` +new_filesize=`ls -l $file | $AWK_PROG '{print $5}'` +if [ $disk_usage -gt 0 ] && [ $new_filesize -eq 0 ]; then + echo "after truncate, file size is 0, but file still owns disk blocks" + status=1 + exit +fi + +echo "Silence is golden" +# success, all done +status=0 +exit diff --git a/tests/btrfs/124.out b/tests/btrfs/124.out new file mode 100644 index 0000000..d7339e6 --- /dev/null +++ b/tests/btrfs/124.out @@ -0,0 +1,2 @@ +QA output created by 124 +Silence is golden diff --git a/tests/btrfs/group b/tests/btrfs/group index 5a26ed7..8b5050e 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -126,3 +126,4 @@ 121 auto quick snapshot qgroup 122 auto quick snapshot qgroup 123 auto quick qgroup +124 auto quick metadata
In btrfs, when truncate operation fails for enospc reason, file may still have some disk blocks, but it will fail to update filesize accordingly. Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> --- tests/btrfs/124 | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/124.out | 2 ++ tests/btrfs/group | 1 + 3 files changed, 89 insertions(+) create mode 100755 tests/btrfs/124 create mode 100644 tests/btrfs/124.out