diff mbox

[v3,1/2] libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit

Message ID 577d3580.46c0620a.b8b1b.ffff9a01@mx.google.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Tom Yan July 6, 2016, 4:44 p.m. UTC
From: Tom Yan <tom.ty89@gmail.com>

Currently if a WRITE SAME (16) command is issued to the SATL with
"number of blocks" that is larger than the "Maximum write same length"
(which is the maximum number of blocks per TRIM command allowed in
libata, currently 65535 * 512 / 8 blocks), the SATL will accept the
command and translate it to a TRIM command with the upper limit.

However, according to SBC (as of sbc4r11.pdf), the "device server"
should terminate the command with "Invalid field in CBD" in that case.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>

Comments

Sergei Shtylyov July 6, 2016, 5:02 p.m. UTC | #1
On 07/06/2016 07:44 PM, tom.ty89@gmail.com wrote:

> From: Tom Yan <tom.ty89@gmail.com>
>
> Currently if a WRITE SAME (16) command is issued to the SATL with
> "number of blocks" that is larger than the "Maximum write same length"
> (which is the maximum number of blocks per TRIM command allowed in
> libata, currently 65535 * 512 / 8 blocks), the SATL will accept the
> command and translate it to a TRIM command with the upper limit.
>
> However, according to SBC (as of sbc4r11.pdf), the "device server"
> should terminate the command with "Invalid field in CBD" in that case.

    CDB again. :-)

> Signed-off-by: Tom Yan <tom.ty89@gmail.com>
[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tom Yan July 6, 2016, 5:18 p.m. UTC | #2
I am so sorry. Now I hate acronym. v5 coming. :-)

On 7 July 2016 at 01:02, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> On 07/06/2016 07:44 PM, tom.ty89@gmail.com wrote:
>
>> From: Tom Yan <tom.ty89@gmail.com>
>>
>> Currently if a WRITE SAME (16) command is issued to the SATL with
>> "number of blocks" that is larger than the "Maximum write same length"
>> (which is the maximum number of blocks per TRIM command allowed in
>> libata, currently 65535 * 512 / 8 blocks), the SATL will accept the
>> command and translate it to a TRIM command with the upper limit.
>>
>> However, according to SBC (as of sbc4r11.pdf), the "device server"
>> should terminate the command with "Invalid field in CBD" in that case.
>
>
>    CDB again. :-)
>
>> Signed-off-by: Tom Yan <tom.ty89@gmail.com>
>
> [...]
>
> MBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index bfec66f..a1f061a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3305,7 +3305,11 @@  static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 		goto invalid_param_len;
 
 	buf = page_address(sg_page(scsi_sglist(scmd)));
-	size = ata_set_lba_range_entries(buf, 512, block, n_block);
+
+	if (n_block <= 65535 * 512 / 8)
+		size = ata_set_lba_range_entries(buf, 512, block, n_block);
+	else
+		goto invalid_fld;
 
 	if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
 		/* Newer devices support queued TRIM commands */