diff mbox

[v5] clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks

Message ID 1467982058-14339-1-git-send-email-andi.shyti@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andi Shyti July 8, 2016, 12:47 p.m. UTC
Commit b82ec4e and a9e93e8 have added support in the spi device
driver for the three clock lines required by the SPI controller
and handles the dependency between the three (by not disabling
any after resume).

This way none of the SPI clocks require any criticality: remove,
then the CLK_IGNORE_UNUSED flag for the SPI related clocks.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---

Hi,

With this, I hope to have reached the end of this patch series :)

After some discussions with Tomasz first and Sylwester later, we
agreed to move all the clock management to the spi driver, here
are the patches that do that:

  http://marc.info/?l=linux-kernel&m=146787645626318&w=2
  http://marc.info/?l=linux-kernel&m=146798033221943&w=2

With the above modifications to the spi driver we don't need any
of the SPI related clocks to be marked either as critical or as
ignore unused.

Thanks,
Andi

 drivers/clk/samsung/clk-exynos5433.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski July 8, 2016, 1:24 p.m. UTC | #1
On 07/08/2016 02:47 PM, Andi Shyti wrote:
> Commit b82ec4e and a9e93e8 have added support in the spi device
> driver for the three clock lines required by the SPI controller
> and handles the dependency between the three (by not disabling
> any after resume).
> 
> This way none of the SPI clocks require any criticality: remove,
> then the CLK_IGNORE_UNUSED flag for the SPI related clocks.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
> 
> Hi,
> 
> With this, I hope to have reached the end of this patch series :)
> 
> After some discussions with Tomasz first and Sylwester later, we
> agreed to move all the clock management to the spi driver, here
> are the patches that do that:
> 
>   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
>   http://marc.info/?l=linux-kernel&m=146798033221943&w=2
> 
> With the above modifications to the spi driver we don't need any
> of the SPI related clocks to be marked either as critical or as
> ignore unused.
> 
> Thanks,
> Andi
> 
>  drivers/clk/samsung/clk-exynos5433.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 

Patch is okay:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

but I think this should not go in separately. This should be part of
SPI-related changes which add proper ioclk consumer to the SPI driver.
Without these changes, as you said to me, synchronous abort will happen.

Best regards,
Krzysztof
Andi Shyti July 8, 2016, 2:27 p.m. UTC | #2
> >  drivers/clk/samsung/clk-exynos5433.c | 5 ++---
> >  1 file changed, 2 insertions(+), 3 deletions(-)
> > 
> 
> Patch is okay:
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> but I think this should not go in separately. This should be part of
> SPI-related changes which add proper ioclk consumer to the SPI driver.
> Without these changes, as you said to me, synchronous abort will happen.

OK, I will send this patch with the SPI patchset.

Please ignore.

Thanks,
Andi
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index c3a5318..fb19525 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1661,8 +1661,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
 			ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
-			ENABLE_SCLK_PERIC, 12,
-			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 12, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
 			ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
@@ -1677,7 +1676,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
-			4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
 			3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",