@@ -156,12 +156,14 @@ struct s3c64xx_spi_port_config {
int quirks;
bool high_speed;
bool clk_from_cmu;
+ bool clk_ioclk;
};
/**
* struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
* @clk: Pointer to the spi clock.
* @src_clk: Pointer to the clock used to generate SPI signals.
+ * @ioclk: Pointer to the i/o clock between master and slave
* @master: Pointer to the SPI Protocol master.
* @cntrlr_info: Platform specific data for the controller this driver manages.
* @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
@@ -181,6 +183,7 @@ struct s3c64xx_spi_driver_data {
void __iomem *regs;
struct clk *clk;
struct clk *src_clk;
+ struct clk *ioclk;
struct platform_device *pdev;
struct spi_master *master;
struct s3c64xx_spi_info *cntrlr_info;
@@ -1147,6 +1150,21 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
goto err_disable_clk;
}
+ if (sdd->port_conf->clk_ioclk) {
+ sdd->ioclk = devm_clk_get(&pdev->dev, "spi_ioclk");
+ if (IS_ERR(sdd->ioclk)) {
+ dev_err(&pdev->dev, "Unable to acquire 'ioclk'\n");
+ ret = PTR_ERR(sdd->ioclk);
+ goto err_disable_src_clk;
+ }
+
+ ret = clk_prepare_enable(sdd->ioclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable clock 'ioclk'\n");
+ goto err_disable_src_clk;
+ }
+ }
+
pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
@@ -1193,6 +1211,8 @@ err_pm_put:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+ clk_disable_unprepare(sdd->ioclk);
+err_disable_src_clk:
clk_disable_unprepare(sdd->src_clk);
err_disable_clk:
clk_disable_unprepare(sdd->clk);
@@ -1211,6 +1231,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
+ clk_disable_unprepare(sdd->ioclk);
+
clk_disable_unprepare(sdd->src_clk);
clk_disable_unprepare(sdd->clk);
@@ -1269,6 +1291,7 @@ static int s3c64xx_spi_runtime_suspend(struct device *dev)
clk_disable_unprepare(sdd->clk);
clk_disable_unprepare(sdd->src_clk);
+ clk_disable_unprepare(sdd->ioclk);
return 0;
}
@@ -1279,17 +1302,28 @@ static int s3c64xx_spi_runtime_resume(struct device *dev)
struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
int ret;
+ if (sdd->port_conf->clk_ioclk) {
+ ret = clk_prepare_enable(sdd->ioclk);
+ if (ret != 0)
+ return ret;
+ }
+
ret = clk_prepare_enable(sdd->src_clk);
if (ret != 0)
- return ret;
+ goto err_disable_ioclk;
ret = clk_prepare_enable(sdd->clk);
- if (ret != 0) {
- clk_disable_unprepare(sdd->src_clk);
- return ret;
- }
+ if (ret != 0)
+ goto err_disable_src_clk;
return 0;
+
+err_disable_src_clk:
+ clk_disable_unprepare(sdd->src_clk);
+err_disable_ioclk:
+ clk_disable_unprepare(sdd->ioclk);
+
+ return ret;
}
#endif /* CONFIG_PM */
@@ -1345,6 +1379,16 @@ static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
};
+static struct s3c64xx_spi_port_config exynos5433_spi_port_config = {
+ .fifo_lvl_mask = { 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff},
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+ .high_speed = true,
+ .clk_from_cmu = true,
+ .clk_ioclk = true,
+ .quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
+};
+
static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
{
.name = "s3c2443-spi",
@@ -1375,6 +1419,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
{ .compatible = "samsung,exynos7-spi",
.data = (void *)&exynos7_spi_port_config,
},
+ { .compatible = "samsung,exynos5433-spi",
+ .data = (void *)&exynos5433_spi_port_config,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);
The new compatible is related to the Samsung Exynos5433 SoC. The difference between the previous is that in the exynos5433 the SPI controller is driven by three clocks instead of only one. The new clock (ioclk) is controlling the input/output clock whenever the controller is slave or master. The presence of the clock line is detected from the compatibility structure (exynos5433_spi_port_config) as a boolean value. The probe function checks whether the ioclk is present and if so, it acquires. The runtime suspend and resume functions will handle the clock enabling and disabling as well. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- drivers/spi/spi-s3c64xx.c | 57 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 52 insertions(+), 5 deletions(-)