diff mbox

[v3,7/7] clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks

Message ID 1468317736-18841-8-git-send-email-andi.shyti@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andi Shyti July 12, 2016, 10:02 a.m. UTC 
Because the Exynos5433 SPI driver supports the ioclk handling and
the following patch:

  http://marc.info/?l=linux-kernel&m=146787645626318&w=2

fixes a synchronus abort issue, none of the SPI clocks require
any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
for the SPI related clocks.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/clk/samsung/clk-exynos5433.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Michael Turquette July 12, 2016, 10:17 p.m. UTC | #1 
Quoting Andi Shyti (2016-07-12 03:02:16)
> Because the Exynos5433 SPI driver supports the ioclk handling and
> the following patch:
> 
>   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
> 
> fixes a synchronus abort issue, none of the SPI clocks require
> any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
> for the SPI related clocks.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Michael Turquette <mturquette@baylibre.com>
> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Do you want these patches to go through same tree? If not, I can take
this patch into clk-next.

Regards,
Mike

> ---
>  drivers/clk/samsung/clk-exynos5433.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index c3a5318..fb19525 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -1661,8 +1661,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
>         GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
>                         ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
> -                       ENABLE_SCLK_PERIC, 12,
> -                       CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> +                       ENABLE_SCLK_PERIC, 12, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
>                         ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
> @@ -1677,7 +1676,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
>         GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
>                         5, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
> -                       4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> +                       4, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
>                         3, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",
> -- 
> 2.8.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andi Shyti July 13, 2016, 2:08 a.m. UTC | #2 
Hi Mike,

> > Because the Exynos5433 SPI driver supports the ioclk handling and
> > the following patch:
> > 
> >   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
> > 
> > fixes a synchronus abort issue, none of the SPI clocks require
> > any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
> > for the SPI related clocks.
> > 
> > Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Reviewed-by: Michael Turquette <mturquette@baylibre.com>
> > Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> 
> Do you want these patches to go through same tree? If not, I can take
> this patch into clk-next.

I think this patchset doesn't apply in your repository, but in
Mark Brown's spi/topic/s3c64xx branch. So that I guess Mark
should take this patchset.

Sorry, I should have specified it in the cover letter.

Thanks,
Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics July 13, 2016, 9:21 a.m. UTC | #3 
On 07/13/2016 12:17 AM, Michael Turquette wrote:
>
> Do you want these patches to go through same tree? If not, I can take
> this patch into clk-next.

I think this patch can safely go separately through the clk tree,
we just need to ensure whole series is merged for same release
to avoid regressions. There should be no problems with git bisect
since there is no exynos5433 based board dts in mainline yet.

--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski July 13, 2016, 9:54 a.m. UTC | #4 
On 07/13/2016 11:21 AM, Sylwester Nawrocki wrote:
> On 07/13/2016 12:17 AM, Michael Turquette wrote:
>>
>> Do you want these patches to go through same tree? If not, I can take
>> this patch into clk-next.
> 
> I think this patch can safely go separately through the clk tree,
> we just need to ensure whole series is merged for same release
> to avoid regressions. There should be no problems with git bisect
> since there is no exynos5433 based board dts in mainline yet.

Ack.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andi Shyti July 13, 2016, 12:44 p.m. UTC | #5 
Hi Mike,

> > Because the Exynos5433 SPI driver supports the ioclk handling and
> > the following patch:
> > 
> >   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
> > 
> > fixes a synchronus abort issue, none of the SPI clocks require
> > any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
> > for the SPI related clocks.
> > 
> > Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Reviewed-by: Michael Turquette <mturquette@baylibre.com>
> > Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> 
> Do you want these patches to go through same tree? If not, I can take
> this patch into clk-next.

oh yes, as Krzysztof and Sylwester pointed out, the dependency is
not that strict as there is no exynos5433 dts yet, so that we
wouldn't break anything if patch 7/7 gets in before the others.

If you want to take in your branch the 7/7, please feel free to
do so. Only the patches on the drivers/spi/spi-s3c64xx.c file
have some dependencies on some previous patches I sent to Mark.

Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Michael Turquette July 13, 2016, 9:56 p.m. UTC | #6 
Quoting Andi Shyti (2016-07-12 03:02:16)
> Because the Exynos5433 SPI driver supports the ioclk handling and
> the following patch:
> 
>   http://marc.info/?l=linux-kernel&m=146787645626318&w=2
> 
> fixes a synchronus abort issue, none of the SPI clocks require
> any critical handling: remove, then, the CLK_IGNORE_UNUSED flag
> for the SPI related clocks.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Reviewed-by: Michael Turquette <mturquette@baylibre.com>
> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Applied towards v4.8.

Regards,
Mike

> ---
>  drivers/clk/samsung/clk-exynos5433.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index c3a5318..fb19525 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -1661,8 +1661,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
>         GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
>                         ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
> -                       ENABLE_SCLK_PERIC, 12,
> -                       CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> +                       ENABLE_SCLK_PERIC, 12, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
>                         ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
> @@ -1677,7 +1676,7 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
>         GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
>                         5, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
> -                       4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> +                       4, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
>                         3, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",
> -- 
> 2.8.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index c3a5318..fb19525 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1661,8 +1661,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
 			ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
-			ENABLE_SCLK_PERIC, 12,
-			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 12, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
 			ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
@@ -1677,7 +1676,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
-			4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
 			3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",