| Message ID | 20160703174813.13970-1-stefan@agner.ch (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Michael Turquette |
| Headers | show |
Hi Stefan, On Sun, Jul 3, 2016 at 2:48 PM, Stefan Agner <stefan@agner.ch> wrote: > Fabio, thanks for testing v1. > > With v2, the warnings should definitly be gone. However, that might > break some boards... Still see the warnings with v2. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016-07-03 11:23, Fabio Estevam wrote: > Hi Stefan, > > On Sun, Jul 3, 2016 at 2:48 PM, Stefan Agner <stefan@agner.ch> wrote: > >> Fabio, thanks for testing v1. >> >> With v2, the warnings should definitly be gone. However, that might >> break some boards... > > Still see the warnings with v2. Hm, just checked again, that is really not the case here. On what base do you test? I tested on clk-next. Dong's clock changes are a prerequisite for that. What U-Boot version do you use? I tested on Colibri iMX7 here, but that early during boot there shouldn't be a difference. -- Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Jul 3, 2016 at 3:25 PM, Stefan Agner <stefan@agner.ch> wrote: > Hm, just checked again, that is really not the case here. On what base > do you test? I tested on clk-next. Dong's clock changes are a > prerequisite for that. Thanks for the clarification. I was testing against linux-next. After manually applying Dong's clock changes from clk-next + your patch the warnings go away, so: Tested-by: Fabio Estevam <festevam@gmail.com> Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoting Stefan Agner (2016-07-03 10:48:13) > All device trees currently in mainline specify the time clock parent > using the assigned-clocks/assigned-clock-parents method, there is no > need to statically assign the parent in the core clock driver. > Also all current boards provide an Ethernet reference clock for the > PHY externally, hence configuring the internal PHY reference clock. > > Furthermore, and the actual driver of this patch, specify ethernet > related parents at that early point in boot leads to a warning: > bad: scheduling from the idle thread! > > The reason for the warning is that setting the parent enables the ENET > PLL since we are using CLK_OPS_PARENT_ENABLE. Enabling the ENET PLL can > cause clk_pllv3_wait_lock to sleep. See also: > commit fc8726a2c021 ("clk: core: support clocks which requires parents > enable (part 2)"). > > Note that setting the ENET AXI root clock parent also requires ENET > PLL to be enabled. However, U-Boot typically leaves the ENET PLL on, > hence when the framework sets the parent of the first clock, it does > not need to wait for the PLL to come up. But because there is currently > no user of that clock, the PLL gets disabled after setting the parent. > Therefore, subsequent reparenting calls of any clock which somehow rely > on the ENET PLL, need to reenable the ENET PLL which leads to a sleep. > Removing those subsequent reparenting calls works around this issue. > > Also remove comments. The code is really verbose enough. > > Signed-off-by: Stefan Agner <stefan@agner.ch> Applied. Regards, Mike > --- > Changes since v1: > - Also remove PHY REF clock > > Hi All, > > Fabio, thanks for testing v1. > > With v2, the warnings should definitly be gone. However, that might > break some boards... > > What is the IMX7D_ENET_PHY_REF_ROOT_SRC clock for anyway? It sounds > like it should provide a clock for the PHY. However, there is also > IMX7D_ENET1_REF_ROOT_CLK and IMX7D_ENET2_REF_ROOT_CLK... > > Our first design used to use a clock provided by the SoC, by muxing > a pad to CCM_ENET1_REF_CLK and enabling IMX7D_ENET1_REF_ROOT_CLK > it seemd to work just fine, there was no need for > IMX7D_ENET_PHY_REF_ROOT_SRC. > > Dong, can you shed some light on this? > > Otherwise, in case a board does not work with that change, something > like this should do the same using device tree. You probably would > have to add this to all FEC instances since this seems to be a shared > clock. > > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_enet1>; > assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, > - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; > - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; > + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, > + <&clks IMX7D_ENET_PHY_REF_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <0>, > + <&clks IMX7D_PLL_ENET_MAIN_25M_CLK>; > assigned-clock-rates = <0>, <100000000>; > phy-mode = "rgmii"; > phy-handle = <ðphy0>; > > -- > Stefan > > drivers/clk/imx/clk-imx7d.c | 9 --------- > 1 file changed, 9 deletions(-) > > diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c > index 79293ed..6ed4f8f 100644 > --- a/drivers/clk/imx/clk-imx7d.c > +++ b/drivers/clk/imx/clk-imx7d.c > @@ -860,16 +860,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) > /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */ > clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); > > - /* > - * init enet clock source: > - * AXI clock source is 250MHz > - * Phy refrence clock is 25MHz > - * 1588 time clock source is 100MHz > - */ > clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_250M_CLK]); > - clk_set_parent(clks[IMX7D_ENET_PHY_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_25M_CLK]); > - clk_set_parent(clks[IMX7D_ENET1_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]); > - clk_set_parent(clks[IMX7D_ENET2_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]); > > /* set uart module clock's parent clock source that must be great then 80MHz */ > clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); > -- > 2.9.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mike, On Wed, Jul 6, 2016 at 9:53 PM, Michael Turquette <mturquette@baylibre.com> wrote: > Quoting Stefan Agner (2016-07-03 10:48:13) >> All device trees currently in mainline specify the time clock parent >> using the assigned-clocks/assigned-clock-parents method, there is no >> need to statically assign the parent in the core clock driver. >> Also all current boards provide an Ethernet reference clock for the >> PHY externally, hence configuring the internal PHY reference clock. >> >> Furthermore, and the actual driver of this patch, specify ethernet >> related parents at that early point in boot leads to a warning: >> bad: scheduling from the idle thread! >> >> The reason for the warning is that setting the parent enables the ENET >> PLL since we are using CLK_OPS_PARENT_ENABLE. Enabling the ENET PLL can >> cause clk_pllv3_wait_lock to sleep. See also: >> commit fc8726a2c021 ("clk: core: support clocks which requires parents >> enable (part 2)"). >> >> Note that setting the ENET AXI root clock parent also requires ENET >> PLL to be enabled. However, U-Boot typically leaves the ENET PLL on, >> hence when the framework sets the parent of the first clock, it does >> not need to wait for the PLL to come up. But because there is currently >> no user of that clock, the PLL gets disabled after setting the parent. >> Therefore, subsequent reparenting calls of any clock which somehow rely >> on the ENET PLL, need to reenable the ENET PLL which leads to a sleep. >> Removing those subsequent reparenting calls works around this issue. >> >> Also remove comments. The code is really verbose enough. >> >> Signed-off-by: Stefan Agner <stefan@agner.ch> > > Applied. I still don't see this patch applied in clk-next. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 12, 2016 at 7:14 PM, Michael Turquette
<mturquette@baylibre.com> wrote:
> It should show up now on the mirror.
Yes, it is there now. Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c index 79293ed..6ed4f8f 100644 --- a/drivers/clk/imx/clk-imx7d.c +++ b/drivers/clk/imx/clk-imx7d.c @@ -860,16 +860,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */ clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); - /* - * init enet clock source: - * AXI clock source is 250MHz - * Phy refrence clock is 25MHz - * 1588 time clock source is 100MHz - */ clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_250M_CLK]); - clk_set_parent(clks[IMX7D_ENET_PHY_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_25M_CLK]); - clk_set_parent(clks[IMX7D_ENET1_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]); - clk_set_parent(clks[IMX7D_ENET2_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]); /* set uart module clock's parent clock source that must be great then 80MHz */ clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
All device trees currently in mainline specify the time clock parent using the assigned-clocks/assigned-clock-parents method, there is no need to statically assign the parent in the core clock driver. Also all current boards provide an Ethernet reference clock for the PHY externally, hence configuring the internal PHY reference clock. Furthermore, and the actual driver of this patch, specify ethernet related parents at that early point in boot leads to a warning: bad: scheduling from the idle thread! The reason for the warning is that setting the parent enables the ENET PLL since we are using CLK_OPS_PARENT_ENABLE. Enabling the ENET PLL can cause clk_pllv3_wait_lock to sleep. See also: commit fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)"). Note that setting the ENET AXI root clock parent also requires ENET PLL to be enabled. However, U-Boot typically leaves the ENET PLL on, hence when the framework sets the parent of the first clock, it does not need to wait for the PLL to come up. But because there is currently no user of that clock, the PLL gets disabled after setting the parent. Therefore, subsequent reparenting calls of any clock which somehow rely on the ENET PLL, need to reenable the ENET PLL which leads to a sleep. Removing those subsequent reparenting calls works around this issue. Also remove comments. The code is really verbose enough. Signed-off-by: Stefan Agner <stefan@agner.ch> --- Changes since v1: - Also remove PHY REF clock Hi All, Fabio, thanks for testing v1. With v2, the warnings should definitly be gone. However, that might break some boards... What is the IMX7D_ENET_PHY_REF_ROOT_SRC clock for anyway? It sounds like it should provide a clock for the PHY. However, there is also IMX7D_ENET1_REF_ROOT_CLK and IMX7D_ENET2_REF_ROOT_CLK... Our first design used to use a clock provided by the SoC, by muxing a pad to CCM_ENET1_REF_CLK and enabling IMX7D_ENET1_REF_ROOT_CLK it seemd to work just fine, there was no need for IMX7D_ENET_PHY_REF_ROOT_SRC. Dong, can you shed some light on this? Otherwise, in case a board does not work with that change, something like this should do the same using device tree. You probably would have to add this to all FEC instances since this seems to be a shared clock. pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>; - assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <0>, + <&clks IMX7D_PLL_ENET_MAIN_25M_CLK>; assigned-clock-rates = <0>, <100000000>; phy-mode = "rgmii"; phy-handle = <ðphy0>; -- Stefan drivers/clk/imx/clk-imx7d.c | 9 --------- 1 file changed, 9 deletions(-)