| Message ID | 1468363508-23843-3-git-send-email-alexandre.belloni@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/13/2016 12:45 AM, Alexandre Belloni wrote: > vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a > reg property. Remove their unit-address. > > Solves: > Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property > Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property > > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Marek Vasut <marex@denx.de> > --- > Cc: Marek Vasut <marex@denx.de> > arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi > index e7b2109fc85a..d9ca7f214677 100644 > --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi > +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi > @@ -106,7 +106,7 @@ > }; > }; > > - vcc_3v3_reg: fixedregulator@0 { > + vcc_3v3_reg: fixedregulator_3v3 { > compatible = "regulator-fixed"; > regulator-name = "VCC 3V3"; > regulator-min-microvolt = <3300000>; > @@ -115,7 +115,7 @@ > regulator-always-on; > }; > > - vcc_mmc0_reg: fixedregulator@1 { > + vcc_mmc0_reg: fixedregulator_mmc0 { > compatible = "regulator-fixed"; > gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; > regulator-name = "RST_n MCI0"; >
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index e7b2109fc85a..d9ca7f214677 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -106,7 +106,7 @@ }; }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; @@ -115,7 +115,7 @@ regulator-always-on; }; - vcc_mmc0_reg: fixedregulator@1 { + vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; regulator-name = "RST_n MCI0";
vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a reg property. Remove their unit-address. Solves: Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- Cc: Marek Vasut <marex@denx.de> arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)