| Message ID | 1468317736-18841-3-git-send-email-andi.shyti@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jul 12, 2016 at 07:02:11PM +0900, Andi Shyti wrote: > These two properties were not documented but used in the spi > dts. Add the related documentation. > > Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> > Reviewed-by: Michael Turquette <mturquette@baylibre.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > Documentation/devicetree/bindings/spi/spi-samsung.txt | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt > index 57d5539..f45c6eb 100644 > --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt > +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt > @@ -24,6 +24,15 @@ Required SoC Specific Properties: > - dma-names: Names for the dma channels. There must be at least one channel > named "tx" for transmit and named "rx" for receive. > > +- clocks: specifies the clock IDs provided to the SPI controller; they are > + required for interacting with the controller itself, for synchronizing the bus > + and as I/O clock (the latter is required by exynos5433 and exynos7). > + > +- clock-names: string names of the clocks in the 'clocks' property; for all the > + the devices the names must be "spi", "spi_busclkN" (where N is determined by > + "samsung,spi-src-clk"), while Exynos5433 should specify a third clock This sounds like you are describing the configuration of the clocks, not the connections. The binding here should list clocks for all possible vaules of N as those are all the input clocks to the block. > + "spi_ioclk" for the I/O clock. > + > Required Board Specific Properties: > > - #address-cells: should be 1. > -- > 2.8.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/16/2016 10:30 PM, Rob Herring wrote: >> diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt >> b/Documentation/devicetree/bindings/spi/spi-samsung.txt >> > index 57d5539..f45c6eb 100644 >> > --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt >> > +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt >> > @@ -24,6 +24,15 @@ Required SoC Specific Properties: >> > - dma-names: Names for the dma channels. There must be at least one channel >> > named "tx" for transmit and named "rx" for receive. >> > >> > +- clocks: specifies the clock IDs provided to the SPI controller; they are >> > + required for interacting with the controller itself, for synchronizing the bus >> > + and as I/O clock (the latter is required by exynos5433 and exynos7). >> > + >> > +- clock-names: string names of the clocks in the 'clocks' property; for all the >> > + the devices the names must be "spi", "spi_busclkN" (where N is determined by >> > + "samsung,spi-src-clk"), while Exynos5433 should specify a third clock > > This sounds like you are describing the configuration of the clocks, not > the connections. The binding here should list clocks for all possible > vaules of N as those are all the input clocks to the block. > >> > + "spi_ioclk" for the I/O clock. I agree we should list all possible spi_busclkN, I must admit I might have introduced some confusion by suggesting wording for clock-names similar to the above while discussing those things internally. Afterwards I came to a similar conclusion all possible input clocks should be listed These will differ depending on the compatible. I checked in documentation of most of related SoCs and for "samsung,s3c6410-spi" or older compatibles possible N is 0..2 (PCLK, USBCLK, PLL clock), for "samsung,s5pv210-spi" and newer possible N is 0 (SCLK_SPI). It's important to have all the input clocks listed so we have a list of parent clocks to the SPI controller's internal clocks, should we ever decide to model them with the clk API. -- Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 57d5539..f45c6eb 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -24,6 +24,15 @@ Required SoC Specific Properties: - dma-names: Names for the dma channels. There must be at least one channel named "tx" for transmit and named "rx" for receive. +- clocks: specifies the clock IDs provided to the SPI controller; they are + required for interacting with the controller itself, for synchronizing the bus + and as I/O clock (the latter is required by exynos5433 and exynos7). + +- clock-names: string names of the clocks in the 'clocks' property; for all the + the devices the names must be "spi", "spi_busclkN" (where N is determined by + "samsung,spi-src-clk"), while Exynos5433 should specify a third clock + "spi_ioclk" for the I/O clock. + Required Board Specific Properties: - #address-cells: should be 1.