| Message ID | 1470682398-18982-1-git-send-email-seanpaul@chromium.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
+ Archit On 08/09/2016 02:53 AM, Sean Paul wrote: > Instead of just preparing the panel on bind, actually prepare/unprepare > during modeset/disable. The panel must be prepared in order to read hpd > status and edid, so we need to keep state around the prepares in order > to ensure we don't accidentally turn the panel off at the wrong time. > > Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Yakir Yang <ykk@rock-chips.com> And I also tested this patch on RK3399 Kevin board, panel works rightly, so: Tested-by: Yakir Yang <ykk@rock-chips.com> Also add Archit into CC list, guess this patch should go through his drm_bridge's tree. Thanks, - Yakir > --- > > Changes in v2: > - Added panel_is_modeset state/lock to avoid racing detect with modeset (marcheu) > - Added prepare/unprepare in .get_modes (yakir) > > drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101 ++++++++++++++++++--- > drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 + > 2 files changed, 93 insertions(+), 11 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > index 32715da..47c449a 100644 > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) > analogix_dp_start_video(dp); > } > > +/* > + * This function is a bit of a catch-all for panel preparation, hopefully > + * simplifying the logic of functions that need to prepare/unprepare the panel > + * below. > + * > + * If @prepare is true, this function will prepare the panel. Conversely, if it > + * is false, the panel will be unprepared. > + * > + * If @is_modeset_prepare is true, the function will disregard the current state > + * of the panel and either prepare/unprepare the panel based on @prepare. Once > + * it finishes, it will update dp->panel_is_modeset to reflect the current state > + * of the panel. > + */ > +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, > + bool prepare, bool is_modeset_prepare) > +{ > + int ret = 0; > + > + if (!dp->plat_data->panel) > + return 0; > + > + mutex_lock(&dp->panel_lock); > + > + /* > + * Exit early if this is a temporary prepare/unprepare and we're already > + * modeset (since we neither want to prepare twice or unprepare early). > + */ > + if (dp->panel_is_modeset && !is_modeset_prepare) > + goto out; > + > + if (prepare) > + ret = drm_panel_prepare(dp->plat_data->panel); > + else > + ret = drm_panel_unprepare(dp->plat_data->panel); > + > + if (ret) > + goto out; > + > + if (is_modeset_prepare) > + dp->panel_is_modeset = prepare; > + > +out: > + mutex_unlock(&dp->panel_lock); > + return ret; > +} > + > int analogix_dp_get_modes(struct drm_connector *connector) > { > struct analogix_dp_device *dp = to_dp(connector); > struct edid *edid = (struct edid *)dp->edid; > - int num_modes = 0; > + int ret, num_modes = 0; > + > + ret = analogix_dp_prepare_panel(dp, true, false); > + if (ret) { > + DRM_ERROR("Failed to prepare panel (%d)\n", ret); > + return 0; > + } > > if (analogix_dp_handle_edid(dp) == 0) { > drm_mode_connector_update_edid_property(&dp->connector, edid); > @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector *connector) > if (dp->plat_data->get_modes) > num_modes += dp->plat_data->get_modes(dp->plat_data, connector); > > + ret = analogix_dp_prepare_panel(dp, false, false); > + if (ret) > + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); > + > return num_modes; > } > > @@ -960,11 +1016,23 @@ enum drm_connector_status > analogix_dp_detect(struct drm_connector *connector, bool force) > { > struct analogix_dp_device *dp = to_dp(connector); > + enum drm_connector_status status = connector_status_disconnected; > + int ret; > > - if (analogix_dp_detect_hpd(dp)) > + ret = analogix_dp_prepare_panel(dp, true, false); > + if (ret) { > + DRM_ERROR("Failed to prepare panel (%d)\n", ret); > return connector_status_disconnected; > + } > + > + if (!analogix_dp_detect_hpd(dp)) > + status = connector_status_connected; > > - return connector_status_connected; > + ret = analogix_dp_prepare_panel(dp, false, false); > + if (ret) > + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); > + > + return status; > } > > static void analogix_dp_connector_destroy(struct drm_connector *connector) > @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge) > return 0; > } > > +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge) > +{ > + struct analogix_dp_device *dp = bridge->driver_private; > + int ret; > + > + ret = analogix_dp_prepare_panel(dp, true, true); > + if (ret) > + DRM_ERROR("failed to setup the panel ret = %d\n", ret); > +} > + > static void analogix_dp_bridge_enable(struct drm_bridge *bridge) > { > struct analogix_dp_device *dp = bridge->driver_private; > @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge) > static void analogix_dp_bridge_disable(struct drm_bridge *bridge) > { > struct analogix_dp_device *dp = bridge->driver_private; > + int ret; > > if (dp->dpms_mode != DRM_MODE_DPMS_ON) > return; > @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) > > pm_runtime_put_sync(dp->dev); > > + ret = analogix_dp_prepare_panel(dp, false, true); > + if (ret) > + DRM_ERROR("failed to setup the panel ret = %d\n", ret); > + > dp->dpms_mode = DRM_MODE_DPMS_OFF; > } > > @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct drm_bridge *bridge) > } > > static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { > + .pre_enable = analogix_dp_bridge_pre_enable, > .enable = analogix_dp_bridge_enable, > .disable = analogix_dp_bridge_disable, > - .pre_enable = analogix_dp_bridge_nop, > .post_disable = analogix_dp_bridge_nop, > .mode_set = analogix_dp_bridge_mode_set, > .attach = analogix_dp_bridge_attach, > @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, > dp->dev = &pdev->dev; > dp->dpms_mode = DRM_MODE_DPMS_OFF; > > + mutex_init(&dp->panel_lock); > + dp->panel_is_modeset = false; > + > /* > * platform dp driver need containor_of the plat_data to get > * the driver private data, so we need to store the point of > @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, > > phy_power_on(dp->phy); > > - if (dp->plat_data->panel) { > - if (drm_panel_prepare(dp->plat_data->panel)) { > - DRM_ERROR("failed to setup the panel\n"); > - return -EBUSY; > - } > - } > - > analogix_dp_init_dp(dp); > > ret = devm_request_threaded_irq(&pdev->dev, dp->irq, > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > index b456380..43108d7 100644 > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > @@ -178,6 +178,9 @@ struct analogix_dp_device { > bool force_hpd; > unsigned char edid[EDID_BLOCK_LENGTH * 2]; > > + struct mutex panel_lock; > + bool panel_is_modeset; > + > struct analogix_dp_plat_data *plat_data; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Aug 09, 2016 at 10:35:57AM +0800, Yakir Yang wrote: > + Archit > > > On 08/09/2016 02:53 AM, Sean Paul wrote: > > Instead of just preparing the panel on bind, actually prepare/unprepare > > during modeset/disable. The panel must be prepared in order to read hpd > > status and edid, so we need to keep state around the prepares in order > > to ensure we don't accidentally turn the panel off at the wrong time. > > > > Signed-off-by: Sean Paul <seanpaul@chromium.org> > > Reviewed-by: Yakir Yang <ykk@rock-chips.com> > > And I also tested this patch on RK3399 Kevin board, panel works rightly, so: > Tested-by: Yakir Yang <ykk@rock-chips.com> > > Also add Archit into CC list, guess this patch should go through his > drm_bridge's tree. drm_bridge stuff moved to -misc ;-) -Daniel > > Thanks, > - Yakir > > > --- > > > > Changes in v2: > > - Added panel_is_modeset state/lock to avoid racing detect with modeset (marcheu) > > - Added prepare/unprepare in .get_modes (yakir) > > > > drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101 ++++++++++++++++++--- > > drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 + > > 2 files changed, 93 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > > index 32715da..47c449a 100644 > > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c > > @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) > > analogix_dp_start_video(dp); > > } > > +/* > > + * This function is a bit of a catch-all for panel preparation, hopefully > > + * simplifying the logic of functions that need to prepare/unprepare the panel > > + * below. > > + * > > + * If @prepare is true, this function will prepare the panel. Conversely, if it > > + * is false, the panel will be unprepared. > > + * > > + * If @is_modeset_prepare is true, the function will disregard the current state > > + * of the panel and either prepare/unprepare the panel based on @prepare. Once > > + * it finishes, it will update dp->panel_is_modeset to reflect the current state > > + * of the panel. > > + */ > > +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, > > + bool prepare, bool is_modeset_prepare) > > +{ > > + int ret = 0; > > + > > + if (!dp->plat_data->panel) > > + return 0; > > + > > + mutex_lock(&dp->panel_lock); > > + > > + /* > > + * Exit early if this is a temporary prepare/unprepare and we're already > > + * modeset (since we neither want to prepare twice or unprepare early). > > + */ > > + if (dp->panel_is_modeset && !is_modeset_prepare) > > + goto out; > > + > > + if (prepare) > > + ret = drm_panel_prepare(dp->plat_data->panel); > > + else > > + ret = drm_panel_unprepare(dp->plat_data->panel); > > + > > + if (ret) > > + goto out; > > + > > + if (is_modeset_prepare) > > + dp->panel_is_modeset = prepare; > > + > > +out: > > + mutex_unlock(&dp->panel_lock); > > + return ret; > > +} > > + > > int analogix_dp_get_modes(struct drm_connector *connector) > > { > > struct analogix_dp_device *dp = to_dp(connector); > > struct edid *edid = (struct edid *)dp->edid; > > - int num_modes = 0; > > + int ret, num_modes = 0; > > + > > + ret = analogix_dp_prepare_panel(dp, true, false); > > + if (ret) { > > + DRM_ERROR("Failed to prepare panel (%d)\n", ret); > > + return 0; > > + } > > if (analogix_dp_handle_edid(dp) == 0) { > > drm_mode_connector_update_edid_property(&dp->connector, edid); > > @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector *connector) > > if (dp->plat_data->get_modes) > > num_modes += dp->plat_data->get_modes(dp->plat_data, connector); > > + ret = analogix_dp_prepare_panel(dp, false, false); > > + if (ret) > > + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); > > + > > return num_modes; > > } > > @@ -960,11 +1016,23 @@ enum drm_connector_status > > analogix_dp_detect(struct drm_connector *connector, bool force) > > { > > struct analogix_dp_device *dp = to_dp(connector); > > + enum drm_connector_status status = connector_status_disconnected; > > + int ret; > > - if (analogix_dp_detect_hpd(dp)) > > + ret = analogix_dp_prepare_panel(dp, true, false); > > + if (ret) { > > + DRM_ERROR("Failed to prepare panel (%d)\n", ret); > > return connector_status_disconnected; > > + } > > + > > + if (!analogix_dp_detect_hpd(dp)) > > + status = connector_status_connected; > > - return connector_status_connected; > > + ret = analogix_dp_prepare_panel(dp, false, false); > > + if (ret) > > + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); > > + > > + return status; > > } > > static void analogix_dp_connector_destroy(struct drm_connector *connector) > > @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge) > > return 0; > > } > > +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge) > > +{ > > + struct analogix_dp_device *dp = bridge->driver_private; > > + int ret; > > + > > + ret = analogix_dp_prepare_panel(dp, true, true); > > + if (ret) > > + DRM_ERROR("failed to setup the panel ret = %d\n", ret); > > +} > > + > > static void analogix_dp_bridge_enable(struct drm_bridge *bridge) > > { > > struct analogix_dp_device *dp = bridge->driver_private; > > @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge) > > static void analogix_dp_bridge_disable(struct drm_bridge *bridge) > > { > > struct analogix_dp_device *dp = bridge->driver_private; > > + int ret; > > if (dp->dpms_mode != DRM_MODE_DPMS_ON) > > return; > > @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) > > pm_runtime_put_sync(dp->dev); > > + ret = analogix_dp_prepare_panel(dp, false, true); > > + if (ret) > > + DRM_ERROR("failed to setup the panel ret = %d\n", ret); > > + > > dp->dpms_mode = DRM_MODE_DPMS_OFF; > > } > > @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct drm_bridge *bridge) > > } > > static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { > > + .pre_enable = analogix_dp_bridge_pre_enable, > > .enable = analogix_dp_bridge_enable, > > .disable = analogix_dp_bridge_disable, > > - .pre_enable = analogix_dp_bridge_nop, > > .post_disable = analogix_dp_bridge_nop, > > .mode_set = analogix_dp_bridge_mode_set, > > .attach = analogix_dp_bridge_attach, > > @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, > > dp->dev = &pdev->dev; > > dp->dpms_mode = DRM_MODE_DPMS_OFF; > > + mutex_init(&dp->panel_lock); > > + dp->panel_is_modeset = false; > > + > > /* > > * platform dp driver need containor_of the plat_data to get > > * the driver private data, so we need to store the point of > > @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, > > phy_power_on(dp->phy); > > - if (dp->plat_data->panel) { > > - if (drm_panel_prepare(dp->plat_data->panel)) { > > - DRM_ERROR("failed to setup the panel\n"); > > - return -EBUSY; > > - } > > - } > > - > > analogix_dp_init_dp(dp); > > ret = devm_request_threaded_irq(&pdev->dev, dp->irq, > > diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > > index b456380..43108d7 100644 > > --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > > +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h > > @@ -178,6 +178,9 @@ struct analogix_dp_device { > > bool force_hpd; > > unsigned char edid[EDID_BLOCK_LENGTH * 2]; > > + struct mutex panel_lock; > > + bool panel_is_modeset; > > + > > struct analogix_dp_plat_data *plat_data; > > }; > > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
On 08/09/2016 08:05 AM, Yakir Yang wrote: > + Archit > > > On 08/09/2016 02:53 AM, Sean Paul wrote: >> Instead of just preparing the panel on bind, actually prepare/unprepare >> during modeset/disable. The panel must be prepared in order to read hpd >> status and edid, so we need to keep state around the prepares in order >> to ensure we don't accidentally turn the panel off at the wrong time. >> >> Signed-off-by: Sean Paul <seanpaul@chromium.org> > > Reviewed-by: Yakir Yang <ykk@rock-chips.com> > > And I also tested this patch on RK3399 Kevin board, panel works rightly, > so: > Tested-by: Yakir Yang <ykk@rock-chips.com> > > Also add Archit into CC list, guess this patch should go through his > drm_bridge's tree. Reviewed-by: Archit Taneja <architt@codeaurora.org> > > Thanks, > - Yakir > >> --- >> >> Changes in v2: >> - Added panel_is_modeset state/lock to avoid racing detect with >> modeset (marcheu) >> - Added prepare/unprepare in .get_modes (yakir) >> >> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101 >> ++++++++++++++++++--- >> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 + >> 2 files changed, 93 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> index 32715da..47c449a 100644 >> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c >> @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct >> analogix_dp_device *dp) >> analogix_dp_start_video(dp); >> } >> +/* >> + * This function is a bit of a catch-all for panel preparation, >> hopefully >> + * simplifying the logic of functions that need to prepare/unprepare >> the panel >> + * below. >> + * >> + * If @prepare is true, this function will prepare the panel. >> Conversely, if it >> + * is false, the panel will be unprepared. >> + * >> + * If @is_modeset_prepare is true, the function will disregard the >> current state >> + * of the panel and either prepare/unprepare the panel based on >> @prepare. Once >> + * it finishes, it will update dp->panel_is_modeset to reflect the >> current state >> + * of the panel. >> + */ >> +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, >> + bool prepare, bool is_modeset_prepare) >> +{ >> + int ret = 0; >> + >> + if (!dp->plat_data->panel) >> + return 0; >> + >> + mutex_lock(&dp->panel_lock); >> + >> + /* >> + * Exit early if this is a temporary prepare/unprepare and we're >> already >> + * modeset (since we neither want to prepare twice or unprepare >> early). >> + */ >> + if (dp->panel_is_modeset && !is_modeset_prepare) >> + goto out; >> + >> + if (prepare) >> + ret = drm_panel_prepare(dp->plat_data->panel); >> + else >> + ret = drm_panel_unprepare(dp->plat_data->panel); >> + >> + if (ret) >> + goto out; >> + >> + if (is_modeset_prepare) >> + dp->panel_is_modeset = prepare; >> + >> +out: >> + mutex_unlock(&dp->panel_lock); >> + return ret; >> +} >> + >> int analogix_dp_get_modes(struct drm_connector *connector) >> { >> struct analogix_dp_device *dp = to_dp(connector); >> struct edid *edid = (struct edid *)dp->edid; >> - int num_modes = 0; >> + int ret, num_modes = 0; >> + >> + ret = analogix_dp_prepare_panel(dp, true, false); >> + if (ret) { >> + DRM_ERROR("Failed to prepare panel (%d)\n", ret); >> + return 0; >> + } >> if (analogix_dp_handle_edid(dp) == 0) { >> drm_mode_connector_update_edid_property(&dp->connector, edid); >> @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector >> *connector) >> if (dp->plat_data->get_modes) >> num_modes += dp->plat_data->get_modes(dp->plat_data, >> connector); >> + ret = analogix_dp_prepare_panel(dp, false, false); >> + if (ret) >> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); >> + >> return num_modes; >> } >> @@ -960,11 +1016,23 @@ enum drm_connector_status >> analogix_dp_detect(struct drm_connector *connector, bool force) >> { >> struct analogix_dp_device *dp = to_dp(connector); >> + enum drm_connector_status status = connector_status_disconnected; >> + int ret; >> - if (analogix_dp_detect_hpd(dp)) >> + ret = analogix_dp_prepare_panel(dp, true, false); >> + if (ret) { >> + DRM_ERROR("Failed to prepare panel (%d)\n", ret); >> return connector_status_disconnected; >> + } >> + >> + if (!analogix_dp_detect_hpd(dp)) >> + status = connector_status_connected; >> - return connector_status_connected; >> + ret = analogix_dp_prepare_panel(dp, false, false); >> + if (ret) >> + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); >> + >> + return status; >> } >> static void analogix_dp_connector_destroy(struct drm_connector >> *connector) >> @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct >> drm_bridge *bridge) >> return 0; >> } >> +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge) >> +{ >> + struct analogix_dp_device *dp = bridge->driver_private; >> + int ret; >> + >> + ret = analogix_dp_prepare_panel(dp, true, true); >> + if (ret) >> + DRM_ERROR("failed to setup the panel ret = %d\n", ret); >> +} >> + >> static void analogix_dp_bridge_enable(struct drm_bridge *bridge) >> { >> struct analogix_dp_device *dp = bridge->driver_private; >> @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct >> drm_bridge *bridge) >> static void analogix_dp_bridge_disable(struct drm_bridge *bridge) >> { >> struct analogix_dp_device *dp = bridge->driver_private; >> + int ret; >> if (dp->dpms_mode != DRM_MODE_DPMS_ON) >> return; >> @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct >> drm_bridge *bridge) >> pm_runtime_put_sync(dp->dev); >> + ret = analogix_dp_prepare_panel(dp, false, true); >> + if (ret) >> + DRM_ERROR("failed to setup the panel ret = %d\n", ret); >> + >> dp->dpms_mode = DRM_MODE_DPMS_OFF; >> } >> @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct >> drm_bridge *bridge) >> } >> static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { >> + .pre_enable = analogix_dp_bridge_pre_enable, >> .enable = analogix_dp_bridge_enable, >> .disable = analogix_dp_bridge_disable, >> - .pre_enable = analogix_dp_bridge_nop, >> .post_disable = analogix_dp_bridge_nop, >> .mode_set = analogix_dp_bridge_mode_set, >> .attach = analogix_dp_bridge_attach, >> @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct >> drm_device *drm_dev, >> dp->dev = &pdev->dev; >> dp->dpms_mode = DRM_MODE_DPMS_OFF; >> + mutex_init(&dp->panel_lock); >> + dp->panel_is_modeset = false; >> + >> /* >> * platform dp driver need containor_of the plat_data to get >> * the driver private data, so we need to store the point of >> @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct >> drm_device *drm_dev, >> phy_power_on(dp->phy); >> - if (dp->plat_data->panel) { >> - if (drm_panel_prepare(dp->plat_data->panel)) { >> - DRM_ERROR("failed to setup the panel\n"); >> - return -EBUSY; >> - } >> - } >> - >> analogix_dp_init_dp(dp); >> ret = devm_request_threaded_irq(&pdev->dev, dp->irq, >> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> index b456380..43108d7 100644 >> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h >> @@ -178,6 +178,9 @@ struct analogix_dp_device { >> bool force_hpd; >> unsigned char edid[EDID_BLOCK_LENGTH * 2]; >> + struct mutex panel_lock; >> + bool panel_is_modeset; >> + >> struct analogix_dp_plat_data *plat_data; >> }; > >
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 32715da..47c449a 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -923,11 +923,63 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) analogix_dp_start_video(dp); } +/* + * This function is a bit of a catch-all for panel preparation, hopefully + * simplifying the logic of functions that need to prepare/unprepare the panel + * below. + * + * If @prepare is true, this function will prepare the panel. Conversely, if it + * is false, the panel will be unprepared. + * + * If @is_modeset_prepare is true, the function will disregard the current state + * of the panel and either prepare/unprepare the panel based on @prepare. Once + * it finishes, it will update dp->panel_is_modeset to reflect the current state + * of the panel. + */ +static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, + bool prepare, bool is_modeset_prepare) +{ + int ret = 0; + + if (!dp->plat_data->panel) + return 0; + + mutex_lock(&dp->panel_lock); + + /* + * Exit early if this is a temporary prepare/unprepare and we're already + * modeset (since we neither want to prepare twice or unprepare early). + */ + if (dp->panel_is_modeset && !is_modeset_prepare) + goto out; + + if (prepare) + ret = drm_panel_prepare(dp->plat_data->panel); + else + ret = drm_panel_unprepare(dp->plat_data->panel); + + if (ret) + goto out; + + if (is_modeset_prepare) + dp->panel_is_modeset = prepare; + +out: + mutex_unlock(&dp->panel_lock); + return ret; +} + int analogix_dp_get_modes(struct drm_connector *connector) { struct analogix_dp_device *dp = to_dp(connector); struct edid *edid = (struct edid *)dp->edid; - int num_modes = 0; + int ret, num_modes = 0; + + ret = analogix_dp_prepare_panel(dp, true, false); + if (ret) { + DRM_ERROR("Failed to prepare panel (%d)\n", ret); + return 0; + } if (analogix_dp_handle_edid(dp) == 0) { drm_mode_connector_update_edid_property(&dp->connector, edid); @@ -940,6 +992,10 @@ int analogix_dp_get_modes(struct drm_connector *connector) if (dp->plat_data->get_modes) num_modes += dp->plat_data->get_modes(dp->plat_data, connector); + ret = analogix_dp_prepare_panel(dp, false, false); + if (ret) + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); + return num_modes; } @@ -960,11 +1016,23 @@ enum drm_connector_status analogix_dp_detect(struct drm_connector *connector, bool force) { struct analogix_dp_device *dp = to_dp(connector); + enum drm_connector_status status = connector_status_disconnected; + int ret; - if (analogix_dp_detect_hpd(dp)) + ret = analogix_dp_prepare_panel(dp, true, false); + if (ret) { + DRM_ERROR("Failed to prepare panel (%d)\n", ret); return connector_status_disconnected; + } + + if (!analogix_dp_detect_hpd(dp)) + status = connector_status_connected; - return connector_status_connected; + ret = analogix_dp_prepare_panel(dp, false, false); + if (ret) + DRM_ERROR("Failed to unprepare panel (%d)\n", ret); + + return status; } static void analogix_dp_connector_destroy(struct drm_connector *connector) @@ -1035,6 +1103,16 @@ static int analogix_dp_bridge_attach(struct drm_bridge *bridge) return 0; } +static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge) +{ + struct analogix_dp_device *dp = bridge->driver_private; + int ret; + + ret = analogix_dp_prepare_panel(dp, true, true); + if (ret) + DRM_ERROR("failed to setup the panel ret = %d\n", ret); +} + static void analogix_dp_bridge_enable(struct drm_bridge *bridge) { struct analogix_dp_device *dp = bridge->driver_private; @@ -1058,6 +1136,7 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge) static void analogix_dp_bridge_disable(struct drm_bridge *bridge) { struct analogix_dp_device *dp = bridge->driver_private; + int ret; if (dp->dpms_mode != DRM_MODE_DPMS_ON) return; @@ -1077,6 +1156,10 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) pm_runtime_put_sync(dp->dev); + ret = analogix_dp_prepare_panel(dp, false, true); + if (ret) + DRM_ERROR("failed to setup the panel ret = %d\n", ret); + dp->dpms_mode = DRM_MODE_DPMS_OFF; } @@ -1165,9 +1248,9 @@ static void analogix_dp_bridge_nop(struct drm_bridge *bridge) } static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { + .pre_enable = analogix_dp_bridge_pre_enable, .enable = analogix_dp_bridge_enable, .disable = analogix_dp_bridge_disable, - .pre_enable = analogix_dp_bridge_nop, .post_disable = analogix_dp_bridge_nop, .mode_set = analogix_dp_bridge_mode_set, .attach = analogix_dp_bridge_attach, @@ -1254,6 +1337,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, dp->dev = &pdev->dev; dp->dpms_mode = DRM_MODE_DPMS_OFF; + mutex_init(&dp->panel_lock); + dp->panel_is_modeset = false; + /* * platform dp driver need containor_of the plat_data to get * the driver private data, so we need to store the point of @@ -1333,13 +1419,6 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, phy_power_on(dp->phy); - if (dp->plat_data->panel) { - if (drm_panel_prepare(dp->plat_data->panel)) { - DRM_ERROR("failed to setup the panel\n"); - return -EBUSY; - } - } - analogix_dp_init_dp(dp); ret = devm_request_threaded_irq(&pdev->dev, dp->irq, diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index b456380..43108d7 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -178,6 +178,9 @@ struct analogix_dp_device { bool force_hpd; unsigned char edid[EDID_BLOCK_LENGTH * 2]; + struct mutex panel_lock; + bool panel_is_modeset; + struct analogix_dp_plat_data *plat_data; };
Instead of just preparing the panel on bind, actually prepare/unprepare during modeset/disable. The panel must be prepared in order to read hpd status and edid, so we need to keep state around the prepares in order to ensure we don't accidentally turn the panel off at the wrong time. Signed-off-by: Sean Paul <seanpaul@chromium.org> --- Changes in v2: - Added panel_is_modeset state/lock to avoid racing detect with modeset (marcheu) - Added prepare/unprepare in .get_modes (yakir) drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 101 ++++++++++++++++++--- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 + 2 files changed, 93 insertions(+), 11 deletions(-)