diff mbox

[v5,6/8] Documentation: bindings: add dt documentation for rk3399 dmc

Message ID 1470799604-12877-7-git-send-email-hl@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

huang lin Aug. 10, 2016, 3:26 a.m. UTC
This patch adds the documentation for rockchip rk3399 dmc driver.

Signed-off-by: Lin Huang <hl@rock-chips.com>
---
Changes in v5:
-None

Changes in v4:
-None

Changes in v3:
-None

Changes in v2:
-None 

Changes in v1:
-None

 .../devicetree/bindings/devfreq/rk3399_dmc.txt     | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

Comments

Chanwoo Choi Aug. 10, 2016, 4:38 a.m. UTC | #1
Hi Lin,

On 2016년 08월 10일 12:26, Lin Huang wrote:
> This patch adds the documentation for rockchip rk3399 dmc driver.
> 
> Signed-off-by: Lin Huang <hl@rock-chips.com>
> ---
> Changes in v5:
> -None
> 
> Changes in v4:
> -None
> 
> Changes in v3:
> -None
> 
> Changes in v2:
> -None 
> 
> Changes in v1:
> -None
> 
>  .../devicetree/bindings/devfreq/rk3399_dmc.txt     | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> 
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> new file mode 100644
> index 0000000..90e9581
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> @@ -0,0 +1,35 @@
> +* Rockchip rk3399 dmc device

dmc -> DMC(Dynamic Memory Controller ?)

> +
> +Required properties:
> +- compatible: Must be "rockchip,rk3399-dmc".
> +- devfreq-events: Node to get ddr loading, Refer to
> +		  Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> +	      depends on the interrupt controller. 

If you add the specific role of this interrupt, it would be better
to understand the operation of interrupt.

> +- clocks: Phandles for clock specified in "clock-names" property
> +- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";

"pclk_ddr_mon" -> "dmc_clk"

> +- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
> +		       for details.
> +- center-supply: Dmc supply node.
> +- status: Marks the node enabled/disabled.
> +
> +Optional properties:
> +- ddr_timing: ddr timing need to pass to arm trust firmware
> +- upthreshold: the upthreshold to simpleondeamnd policy
> +- downdifferential: The downdifferential to simpleondeamnd policy
> +
> +Example:
> +	dmc: dmc {
> +		compatible = "rockchip,rk3399-dmc";
> +		devfreq-events = <&dfi>;
> +		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_DDRCLK>;
> +		clock-names = "dmc_clk";
> +		ddr_timing = <&ddr_timing>;

I think that you should add the detailed document for 
'ddr_timing' because we don't understand the 'ddr_timing' easily
, it depends on the trust firmware.

> +		operating-points-v2 = <&dmc_opp_table>;

I think that you better to add the example of 'dmc_opp_table' 
in the documentation.

> +		center-supply = <&ppvar_centerlogic>;
> +		upthreshold = <15>;
> +		downdifferential = <10>;
> +		status = "disabled";
> +	};
> +
> 

Regards,
Chanwoo Choi
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
new file mode 100644
index 0000000..90e9581
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -0,0 +1,35 @@ 
+* Rockchip rk3399 dmc device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dmc".
+- devfreq-events: Node to get ddr loading, Refer to
+		  Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller. 
+- clocks: Phandles for clock specified in "clock-names" property
+- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
+- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
+		       for details.
+- center-supply: Dmc supply node.
+- status: Marks the node enabled/disabled.
+
+Optional properties:
+- ddr_timing: ddr timing need to pass to arm trust firmware
+- upthreshold: the upthreshold to simpleondeamnd policy
+- downdifferential: The downdifferential to simpleondeamnd policy
+
+Example:
+	dmc: dmc {
+		compatible = "rockchip,rk3399-dmc";
+		devfreq-events = <&dfi>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DDRCLK>;
+		clock-names = "dmc_clk";
+		ddr_timing = <&ddr_timing>;
+		operating-points-v2 = <&dmc_opp_table>;
+		center-supply = <&ppvar_centerlogic>;
+		upthreshold = <15>;
+		downdifferential = <10>;
+		status = "disabled";
+	};
+