| Message ID | 1471306640-29917-4-git-send-email-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
> -----Original Message----- > From: linux-remoteproc-owner@vger.kernel.org [mailto:linux-remoteproc- > owner@vger.kernel.org] On Behalf Of Bjorn Andersson > Sent: Tuesday, August 16, 2016 2:17 AM > To: Ohad Ben-Cohen <ohad@wizery.com>; Bjorn Andersson > <bjorn.andersson@linaro.org> > Cc: linux-remoteproc@vger.kernel.org; linux-arm-msm@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [PATCH 03/14] rpmsg: rpmsg_send() operations takes > rpmsg_endpoint > > The rpmsg_send() operations has been taking a rpmsg_device, but this > forces users of secondary rpmsg_endpoints to use the rpmsg_sendto() > interface - by extracting source and destination from the given data > structures. If we instead pass the rpmsg_endpoint to these functions a > service can use rpmsg_sendto() to respond to messages, even on secondary > endpoints. > > In addition this would allow us to support operations on multiple > channels in future backends that does not support off-channel > operations. > Hi Bjorn, This patch is modifying rpmsg API by using rpmsg_endpoint as argument instead of rpmsg_device. But associated port of rpmsg_client_sample driver is missing in your patch series. Please find inline few comments. > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > drivers/rpmsg/virtio_rpmsg_bus.c | 4 +-- > include/linux/rpmsg.h | 70 +++++++++++++++++++++++----------------- > 2 files changed, 42 insertions(+), 32 deletions(-) > > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c > b/drivers/rpmsg/virtio_rpmsg_bus.c > index c4bd89ea7681..1b63f4b7c2bd 100644 > --- a/drivers/rpmsg/virtio_rpmsg_bus.c > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c > @@ -382,7 +382,7 @@ static int rpmsg_dev_probe(struct device *dev) > nsm.addr = rpdev->src; Since endpoint is now used to indicate source, I'm wondering if it is possible to suppress src field from struct rpmsg_channel and rely only on endpoint addr? Else maybe confusing (which src addr used at the end: rpdev or ept?) > nsm.flags = RPMSG_NS_CREATE; > > - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), > RPMSG_NS_ADDR); > + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), > RPMSG_NS_ADDR); > if (err) > dev_err(dev, "failed to announce service %d\n", err); > } > @@ -407,7 +407,7 @@ static int rpmsg_dev_remove(struct device *dev) > nsm.addr = rpdev->src; > nsm.flags = RPMSG_NS_DESTROY; > > - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), > RPMSG_NS_ADDR); > + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), > RPMSG_NS_ADDR); > if (err) > dev_err(dev, "failed to announce service %d\n", err); > } > diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h > index 2b97c711a5e3..88e302c011e6 100644 > --- a/include/linux/rpmsg.h > +++ b/include/linux/rpmsg.h > @@ -193,13 +193,14 @@ rpmsg_send_offchannel_raw(struct > rpmsg_channel *, u32, u32, void *, int, bool); > > /** > * rpmsg_send() - send a message across to the remote processor > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @data: payload of message > * @len: length of payload > * > - * This function sends @data of length @len on the @rpdev channel. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to, using @rpdev's source and destination addresses. > + * This function sends @data of length @len on the @ept endpoint. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to, using @ept's address and its associated rpmsg > + * device destination addresses. > * In case there are no TX buffers available, the function will block until > * one becomes available, or a timeout of 15 seconds elapses. When the > latter > * happens, -ERESTARTSYS is returned. > @@ -208,23 +209,24 @@ rpmsg_send_offchannel_raw(struct > rpmsg_channel *, u32, u32, void *, int, bool); > * > * Returns 0 on success and an appropriate error value on failure. > */ > -static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int > len) > +static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int > len) > { > - u32 src = rpdev->src, dst = rpdev->dst; > + struct rpmsg_channel *rpdev = ept->rpdev; > + u32 src = ept->addr, dst = rpdev->dst; As this function is part of rpmsg API, it will be good to verify pointers before use. > > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); > } > > /** > * rpmsg_sendto() - send a message across to the remote processor, specify > dst > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @data: payload of message > * @len: length of payload > * @dst: destination address > * > * This function sends @data of length @len to the remote @dst address. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to, using @rpdev's source address. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to, using @ept's address as source. > * In case there are no TX buffers available, the function will block until > * one becomes available, or a timeout of 15 seconds elapses. When the > latter > * happens, -ERESTARTSYS is returned. > @@ -234,16 +236,17 @@ static inline int rpmsg_send(struct rpmsg_channel > *rpdev, void *data, int len) > * Returns 0 on success and an appropriate error value on failure. > */ > static inline > -int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) > +int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst) > { > - u32 src = rpdev->src; > + struct rpmsg_channel *rpdev = ept->rpdev; > + u32 src = ept->addr; ditto > > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); > } > > /** > * rpmsg_send_offchannel() - send a message using explicit src/dst > addresses > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @src: source address > * @dst: destination address > * @data: payload of message > @@ -251,8 +254,8 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void > *data, int len, u32 dst) > * > * This function sends @data of length @len to the remote @dst address, > * and uses @src as the source address. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to. > * In case there are no TX buffers available, the function will block until > * one becomes available, or a timeout of 15 seconds elapses. When the > latter > * happens, -ERESTARTSYS is returned. > @@ -262,21 +265,24 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, > void *data, int len, u32 dst) > * Returns 0 on success and an appropriate error value on failure. > */ > static inline > -int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, > +int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, > void *data, int len) > { > + struct rpmsg_channel *rpdev = ept->rpdev; ditto > + > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); > } > > /** > * rpmsg_send() - send a message across to the remote processor Function name and description not aligned with code. Should be rpmsg_trysend May be in another patch... > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @data: payload of message > * @len: length of payload > * > - * This function sends @data of length @len on the @rpdev channel. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to, using @rpdev's source and destination addresses. > + * This function sends @data of length @len on the @ept endpoint. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to, using @ept's addres as source and its associated > + * rpdev's address as destination. > * In case there are no TX buffers available, the function will immediately > * return -ENOMEM without waiting until one becomes available. > * > @@ -285,23 +291,24 @@ int rpmsg_send_offchannel(struct rpmsg_channel > *rpdev, u32 src, u32 dst, > * Returns 0 on success and an appropriate error value on failure. > */ > static inline > -int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len) > +int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len) > { > - u32 src = rpdev->src, dst = rpdev->dst; > + struct rpmsg_channel *rpdev = ept->rpdev; > + u32 src = ept->addr, dst = rpdev->dst; Pointer check before use > > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); > } > > /** > * rpmsg_sendto() - send a message across to the remote processor, specify > dst Function name should be rpmsg_trysendto > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @data: payload of message > * @len: length of payload > * @dst: destination address > * > * This function sends @data of length @len to the remote @dst address. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to, using @rpdev's source address. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to, using @ept's address as source. > * In case there are no TX buffers available, the function will immediately > * return -ENOMEM without waiting until one becomes available. > * > @@ -310,16 +317,17 @@ int rpmsg_trysend(struct rpmsg_channel *rpdev, > void *data, int len) > * Returns 0 on success and an appropriate error value on failure. > */ > static inline > -int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 > dst) > +int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 > dst) > { > - u32 src = rpdev->src; > + struct rpmsg_channel *rpdev = ept->rpdev; > + u32 src = ept->addr; Check pointer before use > > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); > } > > /** > * rpmsg_send_offchannel() - send a message using explicit src/dst > addresses Description for rpmsg_trysend_offchannel... > - * @rpdev: the rpmsg channel > + * @ept: the rpmsg endpoint > * @src: source address > * @dst: destination address > * @data: payload of message > @@ -327,8 +335,8 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, > void *data, int len, u32 dst) > * > * This function sends @data of length @len to the remote @dst address, > * and uses @src as the source address. > - * The message will be sent to the remote processor which the @rpdev > - * channel belongs to. > + * The message will be sent to the remote processor which the @ept > + * endpoint belongs to. > * In case there are no TX buffers available, the function will immediately > * return -ENOMEM without waiting until one becomes available. > * > @@ -337,9 +345,11 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, > void *data, int len, u32 dst) > * Returns 0 on success and an appropriate error value on failure. > */ > static inline > -int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 > dst, > +int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 > dst, > void *data, int len) > { > + struct rpmsg_channel *rpdev = ept->rpdev; > + Point check before use > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); > } Regards, Loic > > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu 18 Aug 00:36 PDT 2016, Loic PALLARDY wrote: > > > > -----Original Message----- > > From: linux-remoteproc-owner@vger.kernel.org [mailto:linux-remoteproc- [..] > > The rpmsg_send() operations has been taking a rpmsg_device, but this > > forces users of secondary rpmsg_endpoints to use the rpmsg_sendto() > > interface - by extracting source and destination from the given data > > structures. If we instead pass the rpmsg_endpoint to these functions a > > service can use rpmsg_sendto() to respond to messages, even on secondary > > endpoints. > > > > In addition this would allow us to support operations on multiple > > channels in future backends that does not support off-channel > > operations. > > > Hi Bjorn, > > This patch is modifying rpmsg API by using rpmsg_endpoint as argument > instead of rpmsg_device. > But associated port of rpmsg_client_sample driver is missing in your patch series. > Right, I will update the sample code as well. > Please find inline few comments. > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > drivers/rpmsg/virtio_rpmsg_bus.c | 4 +-- > > include/linux/rpmsg.h | 70 +++++++++++++++++++++++----------------- > > 2 files changed, 42 insertions(+), 32 deletions(-) > > > > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c > > b/drivers/rpmsg/virtio_rpmsg_bus.c > > index c4bd89ea7681..1b63f4b7c2bd 100644 > > --- a/drivers/rpmsg/virtio_rpmsg_bus.c > > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c > > @@ -382,7 +382,7 @@ static int rpmsg_dev_probe(struct device *dev) > > nsm.addr = rpdev->src; > > Since endpoint is now used to indicate source, I'm wondering if it is possible > to suppress src field from struct rpmsg_channel and rely only on endpoint addr? > Else maybe confusing (which src addr used at the end: rpdev or ept?) > The rpdev src and dst fields are used to pass information from rpmsg_create_channel() to the probe() where we create the associated endpoint. So I believe the rpdev has to carry this information, in some way. In this particular case I believe it would be better to use rpdev->ept->addr, to clarify that we're announcing the primary endpoints existence. > > nsm.flags = RPMSG_NS_CREATE; > > > > - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), > > RPMSG_NS_ADDR); > > + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), > > RPMSG_NS_ADDR); > > if (err) > > dev_err(dev, "failed to announce service %d\n", err); > > } > > @@ -407,7 +407,7 @@ static int rpmsg_dev_remove(struct device *dev) > > nsm.addr = rpdev->src; > > nsm.flags = RPMSG_NS_DESTROY; > > > > - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), > > RPMSG_NS_ADDR); > > + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), > > RPMSG_NS_ADDR); > > if (err) > > dev_err(dev, "failed to announce service %d\n", err); > > } > > diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h [..] > > -static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int > > len) > > +static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int > > len) > > { > > - u32 src = rpdev->src, dst = rpdev->dst; > > + struct rpmsg_channel *rpdev = ept->rpdev; > > + u32 src = ept->addr, dst = rpdev->dst; > As this function is part of rpmsg API, it will be good to verify pointers before use. I don't think we should be too friendly to miss-usage of the API, as this would likely indicate a bug in the client. That said, we can make it verbose and remove the panic by adding: if (WARN_ON(!ept)) return -EINVAL; Does that sound okay? [..] > > + > > return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); > > } > > > > /** > > * rpmsg_send() - send a message across to the remote processor > Function name and description not aligned with code. > Should be rpmsg_trysend > May be in another patch... > Yeah, I noticed this too, but not until it would be annoying to rebase my patches ontop the change; so I was planning to fix that ontop, rather than before this refactoring. > > - * @rpdev: the rpmsg channel > > + * @ept: the rpmsg endpoint > > * @data: payload of message > > * @len: length of payload > > * > > - * This function sends @data of length @len on the @rpdev channel. > > - * The message will be sent to the remote processor which the @rpdev > > - * channel belongs to, using @rpdev's source and destination addresses. > > + * This function sends @data of length @len on the @ept endpoint. > > + * The message will be sent to the remote processor which the @ept > > + * endpoint belongs to, using @ept's addres as source and its associated > > + * rpdev's address as destination. > > * In case there are no TX buffers available, the function will immediately > > * return -ENOMEM without waiting until one becomes available. > > * Thanks for your feedback. Regards, Bjorn
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index c4bd89ea7681..1b63f4b7c2bd 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -382,7 +382,7 @@ static int rpmsg_dev_probe(struct device *dev) nsm.addr = rpdev->src; nsm.flags = RPMSG_NS_CREATE; - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR); + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); if (err) dev_err(dev, "failed to announce service %d\n", err); } @@ -407,7 +407,7 @@ static int rpmsg_dev_remove(struct device *dev) nsm.addr = rpdev->src; nsm.flags = RPMSG_NS_DESTROY; - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm), RPMSG_NS_ADDR); + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR); if (err) dev_err(dev, "failed to announce service %d\n", err); } diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index 2b97c711a5e3..88e302c011e6 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -193,13 +193,14 @@ rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool); /** * rpmsg_send() - send a message across to the remote processor - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @data: payload of message * @len: length of payload * - * This function sends @data of length @len on the @rpdev channel. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to, using @rpdev's source and destination addresses. + * This function sends @data of length @len on the @ept endpoint. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to, using @ept's address and its associated rpmsg + * device destination addresses. * In case there are no TX buffers available, the function will block until * one becomes available, or a timeout of 15 seconds elapses. When the latter * happens, -ERESTARTSYS is returned. @@ -208,23 +209,24 @@ rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool); * * Returns 0 on success and an appropriate error value on failure. */ -static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len) +static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len) { - u32 src = rpdev->src, dst = rpdev->dst; + struct rpmsg_channel *rpdev = ept->rpdev; + u32 src = ept->addr, dst = rpdev->dst; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } /** * rpmsg_sendto() - send a message across to the remote processor, specify dst - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @data: payload of message * @len: length of payload * @dst: destination address * * This function sends @data of length @len to the remote @dst address. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to, using @rpdev's source address. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to, using @ept's address as source. * In case there are no TX buffers available, the function will block until * one becomes available, or a timeout of 15 seconds elapses. When the latter * happens, -ERESTARTSYS is returned. @@ -234,16 +236,17 @@ static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len) * Returns 0 on success and an appropriate error value on failure. */ static inline -int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst) { - u32 src = rpdev->src; + struct rpmsg_channel *rpdev = ept->rpdev; + u32 src = ept->addr; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } /** * rpmsg_send_offchannel() - send a message using explicit src/dst addresses - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @src: source address * @dst: destination address * @data: payload of message @@ -251,8 +254,8 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) * * This function sends @data of length @len to the remote @dst address, * and uses @src as the source address. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to. * In case there are no TX buffers available, the function will block until * one becomes available, or a timeout of 15 seconds elapses. When the latter * happens, -ERESTARTSYS is returned. @@ -262,21 +265,24 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) * Returns 0 on success and an appropriate error value on failure. */ static inline -int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, +int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len) { + struct rpmsg_channel *rpdev = ept->rpdev; + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true); } /** * rpmsg_send() - send a message across to the remote processor - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @data: payload of message * @len: length of payload * - * This function sends @data of length @len on the @rpdev channel. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to, using @rpdev's source and destination addresses. + * This function sends @data of length @len on the @ept endpoint. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to, using @ept's addres as source and its associated + * rpdev's address as destination. * In case there are no TX buffers available, the function will immediately * return -ENOMEM without waiting until one becomes available. * @@ -285,23 +291,24 @@ int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, * Returns 0 on success and an appropriate error value on failure. */ static inline -int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len) +int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len) { - u32 src = rpdev->src, dst = rpdev->dst; + struct rpmsg_channel *rpdev = ept->rpdev; + u32 src = ept->addr, dst = rpdev->dst; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } /** * rpmsg_sendto() - send a message across to the remote processor, specify dst - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @data: payload of message * @len: length of payload * @dst: destination address * * This function sends @data of length @len to the remote @dst address. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to, using @rpdev's source address. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to, using @ept's address as source. * In case there are no TX buffers available, the function will immediately * return -ENOMEM without waiting until one becomes available. * @@ -310,16 +317,17 @@ int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len) * Returns 0 on success and an appropriate error value on failure. */ static inline -int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) +int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst) { - u32 src = rpdev->src; + struct rpmsg_channel *rpdev = ept->rpdev; + u32 src = ept->addr; return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); } /** * rpmsg_send_offchannel() - send a message using explicit src/dst addresses - * @rpdev: the rpmsg channel + * @ept: the rpmsg endpoint * @src: source address * @dst: destination address * @data: payload of message @@ -327,8 +335,8 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) * * This function sends @data of length @len to the remote @dst address, * and uses @src as the source address. - * The message will be sent to the remote processor which the @rpdev - * channel belongs to. + * The message will be sent to the remote processor which the @ept + * endpoint belongs to. * In case there are no TX buffers available, the function will immediately * return -ENOMEM without waiting until one becomes available. * @@ -337,9 +345,11 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst) * Returns 0 on success and an appropriate error value on failure. */ static inline -int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst, +int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst, void *data, int len) { + struct rpmsg_channel *rpdev = ept->rpdev; + return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false); }
The rpmsg_send() operations has been taking a rpmsg_device, but this forces users of secondary rpmsg_endpoints to use the rpmsg_sendto() interface - by extracting source and destination from the given data structures. If we instead pass the rpmsg_endpoint to these functions a service can use rpmsg_sendto() to respond to messages, even on secondary endpoints. In addition this would allow us to support operations on multiple channels in future backends that does not support off-channel operations. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/rpmsg/virtio_rpmsg_bus.c | 4 +-- include/linux/rpmsg.h | 70 +++++++++++++++++++++++----------------- 2 files changed, 42 insertions(+), 32 deletions(-)