Message ID | 1471344312-26685-5-git-send-email-punit.agrawal@arm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Aug 16, 2016 at 11:45:09AM +0100, Punit Agrawal wrote: > From: Mark Rutland <mark.rutland@arm.com> > > As with dsb() and isb(), add a __tbli() helper so that we can avoid Minor typo: s/__tbli/__tlbi/ > distracting asm boilerplate every time we want a TLBI. As some TLBI > operations take an argument while others do not, some pre-processor is > used to handle these two cases with different assembly blocks. > > The existing tlbflush.h code is moved over to use the helper. > > Signed-off-by: Mark Rutland <mark.rutland@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > [ rename helper to __tlbi, update commit log ] > Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> > --- > arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- > 1 file changed, 23 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h > index b460ae2..d57a0be 100644 > --- a/arch/arm64/include/asm/tlbflush.h > +++ b/arch/arm64/include/asm/tlbflush.h > @@ -25,6 +25,21 @@ > #include <asm/cputype.h> > > /* > + * Raw TLBI operations. Drivers and most kernel code should use the TLB > + * management routines below in preference to these. Where necessary, these can > + * be used to avoid asm() boilerplate. > + * > + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a > + * particular TLBI op takes an argument or not. The macros below handle invoking > + * the asm with or without the register argument as appropriate. > + */ > +#define TLBI_0(op, arg) asm ("tlbi " #op) > +#define TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) > +#define TLBI_N(op, arg, n, ...) TLBI_##n(op, arg) Should this be prefixed with underscores, too? Will
Will Deacon <will.deacon@arm.com> writes: > On Tue, Aug 16, 2016 at 11:45:09AM +0100, Punit Agrawal wrote: >> From: Mark Rutland <mark.rutland@arm.com> >> >> As with dsb() and isb(), add a __tbli() helper so that we can avoid > > Minor typo: s/__tbli/__tlbi/ Thanks for spotting. I've fixed this locally now. > >> distracting asm boilerplate every time we want a TLBI. As some TLBI >> operations take an argument while others do not, some pre-processor is >> used to handle these two cases with different assembly blocks. >> >> The existing tlbflush.h code is moved over to use the helper. >> >> Signed-off-by: Mark Rutland <mark.rutland@arm.com> >> Cc: Catalin Marinas <catalin.marinas@arm.com> >> Cc: Marc Zyngier <marc.zyngier@arm.com> >> Cc: Will Deacon <will.deacon@arm.com> >> [ rename helper to __tlbi, update commit log ] >> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> >> --- >> arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- >> 1 file changed, 23 insertions(+), 8 deletions(-) >> >> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h >> index b460ae2..d57a0be 100644 >> --- a/arch/arm64/include/asm/tlbflush.h >> +++ b/arch/arm64/include/asm/tlbflush.h >> @@ -25,6 +25,21 @@ >> #include <asm/cputype.h> >> >> /* >> + * Raw TLBI operations. Drivers and most kernel code should use the TLB >> + * management routines below in preference to these. Where necessary, these can >> + * be used to avoid asm() boilerplate. >> + * >> + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a >> + * particular TLBI op takes an argument or not. The macros below handle invoking >> + * the asm with or without the register argument as appropriate. >> + */ >> +#define TLBI_0(op, arg) asm ("tlbi " #op) >> +#define TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) >> +#define TLBI_N(op, arg, n, ...) TLBI_##n(op, arg) > > Should this be prefixed with underscores, too? As these were only used in the definition of __tlbi() I didn't prefix them. I'll add them for the next posting. Thanks for taking a look. Punit > > Will > _______________________________________________ > kvmarm mailing list > kvmarm@lists.cs.columbia.edu > https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index b460ae2..d57a0be 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -25,6 +25,21 @@ #include <asm/cputype.h> /* + * Raw TLBI operations. Drivers and most kernel code should use the TLB + * management routines below in preference to these. Where necessary, these can + * be used to avoid asm() boilerplate. + * + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a + * particular TLBI op takes an argument or not. The macros below handle invoking + * the asm with or without the register argument as appropriate. + */ +#define TLBI_0(op, arg) asm ("tlbi " #op) +#define TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) +#define TLBI_N(op, arg, n, ...) TLBI_##n(op, arg) + +#define __tlbi(op, ...) TLBI_N(op, ##__VA_ARGS__, 1, 0) + +/* * TLB Management * ============== * @@ -66,7 +81,7 @@ static inline void local_flush_tlb_all(void) { dsb(nshst); - asm("tlbi vmalle1"); + __tlbi(vmalle1); dsb(nsh); isb(); } @@ -74,7 +89,7 @@ static inline void local_flush_tlb_all(void) static inline void flush_tlb_all(void) { dsb(ishst); - asm("tlbi vmalle1is"); + __tlbi(vmalle1is); dsb(ish); isb(); } @@ -84,7 +99,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) unsigned long asid = ASID(mm) << 48; dsb(ishst); - asm("tlbi aside1is, %0" : : "r" (asid)); + __tlbi(aside1is, asid); dsb(ish); } @@ -94,7 +109,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); dsb(ishst); - asm("tlbi vale1is, %0" : : "r" (addr)); + __tlbi(vale1is, addr); dsb(ish); } @@ -122,9 +137,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { if (last_level) - asm("tlbi vale1is, %0" : : "r"(addr)); + __tlbi(vale1is, addr); else - asm("tlbi vae1is, %0" : : "r"(addr)); + __tlbi(vae1is, addr); } dsb(ish); } @@ -149,7 +164,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) - asm("tlbi vaae1is, %0" : : "r"(addr)); + __tlbi(vaae1is, addr); dsb(ish); isb(); } @@ -163,7 +178,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, { unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); - asm("tlbi vae1is, %0" : : "r" (addr)); + __tlbi(vae1is, addr); dsb(ish); }