| Message ID | 1471329328-26842-2-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/16/2016 08:35 AM, Chanwoo Choi wrote: > This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. > This board fully support the all things for mobile target. > > This patch supports the following devices: > 1. basic SoC > - Initial booting for Samsung Exynos5433 SoC > - DRAM LPDDR3 (3GB) > - eMMC (32GB) > - ARM architecture timer > > 2. power management devices > - Sasmung S2MPS13 PMIC for the power supply > - CPUFREQ for big.LITTLE cores > - TMU for big.LITTLE cores and GPU > - ADC with thermistor to measure the temperature of AP/Battery/Charger > - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) > > 3. sound devices > - I2S for sound bus > - LPASS for sound power control > - Wolfson WM5110 for sound codec > - Maxim MAX98504 for speaker amplifier > - TM2 ASoC Machine device driver node > > 3. display devices > - DECON, DSI and MIC for the panel output > > 4. usb devices > - USB 3.0 DRD (Dual Role Device) > - USB 3.0 Host controller > > 5. storage devices > - MSHC (obile Storae Host Controller) for eMMC device Mobile Storage > > 6. misc devices > - gpio-keys (power, volume up/down, home key) > - PWM (Pulse Width Modulation Timer) > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> > Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Inha Song <ideal.song@samsung.com> > Signed-off-by: Ingi kim <ingi2.kim@samsung.com> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > .../bindings/arm/samsung/samsung-boards.txt | 1 + > arch/arm64/boot/dts/exynos/Makefile | 5 +- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ > 3 files changed, 1008 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > > diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > index 0ea7f14ef294..c704b4bf6137 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > @@ -15,6 +15,7 @@ Required root node properties: > - "samsung,xyref5260" - for Exynos5260-based Samsung board. > - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. > - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. > + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. > - "samsung,sd5v1" - for Exynos5440-based Samsung board. > - "samsung,ssdk5440" - for Exynos5440-based Samsung board. > > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile > index 50c9b9383cfa..7ddea53769a7 100644 > --- a/arch/arm64/boot/dts/exynos/Makefile > +++ b/arch/arm64/boot/dts/exynos/Makefile > @@ -1,4 +1,7 @@ > -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb > +dtb-$(CONFIG_ARCH_EXYNOS) += \ > + exynos5433-tm2.dtb \ > + exynos5433-tm2e.dtb \ > + exynos7-espresso.dtb > > always := $(dtb-y) > subdir-y := $(dts-dirs) > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > new file mode 100644 > index 000000000000..3e497b0d0015 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -0,0 +1,1003 @@ > +/* > + * SAMSUNG Exynos5433 TM2 board device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Device tree source file for Samsung's TM2 board which is based on > + * Samsung Exynos5433 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > +#include "exynos5433.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Samsung TM2 board"; > + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; > + > + aliases { > + i2c0 = &hsi2c_0; > + i2c1 = &hsi2c_1; > + i2c2 = &hsi2c_2; > + i2c3 = &hsi2c_3; > + i2c4 = &hsi2c_4; > + i2c5 = &hsi2c_5; > + i2c6 = &hsi2c_6; > + i2c7 = &hsi2c_7; > + i2c8 = &hsi2c_8; > + i2c9 = &hsi2c_9; > + i2c10 = &hsi2c_10; > + i2c11 = &hsi2c_11; > + mshc0 = &mshc_0; > + mshc1 = &mshc_1; > + mshc2 = &mshc_2; > + pinctrl0 = &pinctrl_alive; > + pinctrl1 = &pinctrl_aud; > + pinctrl2 = &pinctrl_cpif; > + pinctrl3 = &pinctrl_ese; > + pinctrl4 = &pinctrl_finger; > + pinctrl5 = &pinctrl_fsys; > + pinctrl6 = &pinctrl_imem; > + pinctrl7 = &pinctrl_nfc; > + pinctrl8 = &pinctrl_peric; > + pinctrl9 = &pinctrl_touch; > + serial0 = &serial_0; > + serial1 = &serial_1; > + serial2 = &serial_2; > + serial3 = &serial_3; > + spi0 = &spi_0; > + spi1 = &spi_1; > + spi2 = &spi_2; > + spi3 = &spi_3; > + spi4 = &spi_4; > + usbdrdphy0 = &usbdrd30_phy; > + }; > + > + chosen { > + stdout-path = &serial_1; > + }; > + > + memory@20000000 { > + device_type = "memory"; > + reg = <0x0 0x20000000 0x0 0xc0000000>; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + > + power_key { > + gpios = <&gpa2 7 1>; s/1/GPIO_ACTIVE_LOW/ > + linux,code = <KEY_POWER>; > + label = "power key"; > + debounce-interval = <10>; > + gpio-key,wakeup; > + }; > + > + volume_up_key { > + gpios = <&gpa2 0 1>; s/1/GPIO_ACTIVE_LOW/ > + linux,code = <KEY_VOLUMEUP>; > + label = "volume-up key"; > + debounce-interval = <10>; > + }; > + > + volume_down_key { > + gpios = <&gpa2 1 1>; s/1/GPIO_ACTIVE_LOW/ > + linux,code = <KEY_VOLUMEDOWN>; > + label = "volume-down key"; > + debounce-interval = <10>; > + }; > + > + homepage_key { > + gpios = <&gpa0 3 1>; s/1/GPIO_ACTIVE_LOW/ > + linux,code = <KEY_MENU>; > + label = "homepage key"; > + debounce-interval = <10>; > + }; > + }; > + > + i2c_max98504: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ > + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + max98504: max98504@31 { > + compatible = "maxim,max98504"; > + reg = <0x31>; > + maxim,rx-path = <1>; > + maxim,tx-path = <1>; > + maxim,tx-channel-mask = <3>; > + maxim,tx-channel-source = <2>; > + }; > + }; > + > + sound { > + compatible = "samsung,tm2-audio"; > + audio-codec = <&wm5110>; > + i2s-controller = <&i2s0>; > + audio-amplifier = <&max98504>; > + mic-bias-gpios = <&gpr3 2 0>; s/0/GPIO_ACTIVE_HIGH/ > + model = "wm5110"; > + samsung,audio-routing = > + /* Headphone */ > + "HP", "HPOUT1L", > + "HP", "HPOUT1R", > + > + /* Speaker */ > + "SPK", "SPKOUT", > + "SPKOUT", "HPOUT2L", > + "SPKOUT", "HPOUT2R", > + > + /* Receiver */ > + "RCV", "HPOUT3L", > + "RCV", "HPOUT3R"; > + status = "okay"; > + }; > +}; > + > +&adc { > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > + > + thermistor-ap { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 0>; > + }; > + > + thermistor_battery: thermistor-battery { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 1>; > + #thermal-sensor-cells = <0>; > + }; > + > + thermistor-charger { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 2>; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&buck3_reg>; > +}; > + > +&cpu4 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&decon { > + status = "okay"; > + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; > + > + i80-if-timings { > + }; > +}; > + > +&dsi { > + status = "okay"; > + vddcore-supply = <&ldo6_reg>; > + vddio-supply = <&ldo7_reg>; > + samsung,pll-clock-frequency = <24000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&te_irq>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + > + dsi_out: endpoint { > + samsung,burst-clock-frequency = <512000000>; > + samsung,esc-clock-frequency = <16000000>; > + }; > + }; > + }; > +}; > + > +&hsi2c_0 { > + status = "okay"; > + clock-frequency = <2500000>; > + > + s2mps13_pmic@66 { > + compatible = "samsung,s2mps13-pmic"; > + interrupt-parent = <&gpa0>; > + interrupts = <7 0>; s/0/IRQ_TYPE_NONE/ > + reg = <0x66>; > + wakeup; I think there is no such "wakeup" property. > + samsung,s2mps11-wrstbi-ground; > + > + s2mps13_osc: clocks { > + compatible = "samsung,s2mps13-clk"; > + #clock-cells = <1>; > + clock-output-names = "s2mps13_ap", "s2mps13_cp", > + "s2mps13_bt"; > + }; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ALIVE_0.9V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDDQ_MMC2_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VDD1_E_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VDD10_DPLL_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VDD10_MIPI2L_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD18_MIPI2L_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VDD18_LLI_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD33_USB30_3.0V_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_INT_M_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "VDD_KFC_M_1.1V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "VDD_G3D_M_0.95V_AP"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "VDDQ_EFUSE"; > + regulator-min-microvolt = <1400000>; > + regulator-max-microvolt = <3400000>; > + regulator-always-on; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "V_TFLASH_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "V_CODEC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "VDDA_1.8V_COMP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "VCC_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VT_CAM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "CAM_IO_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "CAM_SEN_CORE_1.2V_AP"; > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "VT_CAM_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo25_reg: LDO25 { > + regulator-name = "CAM_SEN_A2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "CAM_AF_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo27_reg: LDO27 { > + regulator-name = "VCC_3.0V_LCD_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + ldo28_reg: LDO28 { > + regulator-name = "VCC_1.8V_LCD_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo29_reg: LDO29 { > + regulator-name = "VT_CAM_2.8V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + ldo30_reg: LDO30 { > + regulator-name = "TSP_AVDD_3.3V_AP"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo31_reg: LDO31 { > + regulator-name = "TSP_VDD_1.85V_AP"; > + regulator-min-microvolt = <1850000>; > + regulator-max-microvolt = <1850000>; > + regulator-boot-on; > + }; > + > + ldo32_reg: LDO32 { > + regulator-name = "VTOUCH_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + ldo33_reg: LDO33 { > + regulator-name = "VTOUCH_LED_3.3V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + }; > + > + ldo34_reg: LDO34 { > + regulator-name = "VCC_1.8V_MHL_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <2100000>; > + }; > + > + ldo35_reg: LDO35 { > + regulator-name = "OIS_VM_2.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo36_reg: LDO36 { > + regulator-name = "VSIL_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo37_reg: LDO37 { > + regulator-name = "VF_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo38_reg: LDO38 { > + regulator-name = "VCC_3.0V_MOTOR_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo39_reg: LDO39 { > + regulator-name = "V_HRM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo40_reg: LDO40 { > + regulator-name = "V_HRM_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VDD_MIF_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VDD_EGL_1.0V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_KFC_1.0V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "VDD_INT_0.95V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "VDD_G3D_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VDD_MEM1_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "VDD_LLDO_1.35V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "VDD_MLDO_2.0V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck10_reg: BUCK10 { > + regulator-name = "vdd_mem2"; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&hsi2c_8 { > + status = "okay"; > + > + max77843@66 { > + compatible = "samsung,max77843"; There is no such compatible. > + interrupt-parent = <&gpa1>; > + interrupts = <5 2>; IRQ_TYPE_EDGE_FALLING > + reg = <0x66>; > + wakeup; Ditto - wakeup. > + > + muic: max77843-muic { > + compatible = "maxim,max77843-muic"; > + }; > + > + regulators { > + compatible = "maxim,max77843-regulator"; BTW, It's a pity that max77843 submission was not finished. These compatibles are not documented. Also the charger driver did not reach mainline. The fuelgauge probably has wrong compatible in MFD driver. > + safeout1_reg: SAFEOUT1 { > + regulator-name = "SAFEOUT1"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + > + safeout2_reg: SAFEOUT2 { > + regulator-name = "SAFEOUT2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <4950000>; > + }; > + > + charger_reg: CHARGER { > + regulator-name = "CHARGER"; > + regulator-min-microamp = <100000>; > + regulator-max-microamp = <3150000>; > + }; > + }; > + > + haptic: max77843-haptic { > + compatible = "maxim,max77843-haptic"; > + haptic-supply = <&ldo38_reg>; > + pwms = <&pwm 0 33670 0>; > + pwm-names = "haptic"; > + }; > + }; > +}; > + > +&hsi2c_11 { > + status = "okay"; What is inside? How does it work if there is no child device specified? > +}; > + > +&i2s0 { > + status = "okay"; > +}; > + > +&lpass { > + status = "okay"; > +}; > + > +&mshc_0 { > + status = "okay"; > + num-slots = <1>; > + broken-cd; > + non-removable; Putting both properties - broken and non-removable - is not supported. Please choose one. > + card-detect-delay = <200>; > + samsung,dw-mshc-ciu-div = <3>; > + samsung,dw-mshc-sdr-timing = <0 4>; > + samsung,dw-mshc-ddr-timing = <0 2>; > + samsung,dw-mshc-hs400-timing = <0 3>; > + samsung,read-strobe-delay = <90>; > + fifo-depth = <0x80>; > + pinctrl-names = "default"; > + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>; > + bus-width = <8>; > + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; > + assigned-clock-rates = <800000000>; > +}; > + > +&pinctrl_alive { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_alive>; > + > + initial_alive: initial-state { > + PIN(IN, gpa0-0, DOWN, LV1); > + PIN(IN, gpa0-1, NONE, LV1); > + PIN(IN, gpa0-2, DOWN, LV1); > + PIN(IN, gpa0-3, NONE, LV1); > + PIN(IN, gpa0-4, NONE, LV1); > + PIN(IN, gpa0-5, DOWN, LV1); > + PIN(IN, gpa0-6, NONE, LV1); > + PIN(IN, gpa0-7, NONE, LV1); > + > + PIN(IN, gpa1-0, UP, LV1); > + PIN(IN, gpa1-1, NONE, LV1); > + PIN(IN, gpa1-2, NONE, LV1); > + PIN(IN, gpa1-3, DOWN, LV1); > + PIN(IN, gpa1-4, DOWN, LV1); > + PIN(IN, gpa1-5, NONE, LV1); > + PIN(IN, gpa1-6, NONE, LV1); > + PIN(IN, gpa1-7, NONE, LV1); > + > + PIN(IN, gpa2-0, NONE, LV1); > + PIN(IN, gpa2-1, NONE, LV1); > + PIN(IN, gpa2-2, NONE, LV1); > + PIN(IN, gpa2-3, DOWN, LV1); > + PIN(IN, gpa2-4, NONE, LV1); > + PIN(IN, gpa2-5, DOWN, LV1); > + PIN(IN, gpa2-6, DOWN, LV1); > + PIN(IN, gpa2-7, NONE, LV1); > + > + PIN(IN, gpa3-0, DOWN, LV1); > + PIN(IN, gpa3-1, DOWN, LV1); > + PIN(IN, gpa3-2, NONE, LV1); > + PIN(IN, gpa3-3, DOWN, LV1); > + PIN(IN, gpa3-4, NONE, LV1); > + PIN(IN, gpa3-5, DOWN, LV1); > + PIN(IN, gpa3-6, DOWN, LV1); > + PIN(IN, gpa3-7, DOWN, LV1); > + > + PIN(IN, gpf1-0, NONE, LV1); > + PIN(IN, gpf1-1, NONE, LV1); > + PIN(IN, gpf1-2, DOWN, LV1); > + PIN(IN, gpf1-4, UP, LV1); > + PIN(OUT, gpf1-5, NONE, LV1); > + PIN(IN, gpf1-6, DOWN, LV1); > + PIN(IN, gpf1-7, DOWN, LV1); > + > + PIN(IN, gpf2-0, DOWN, LV1); > + PIN(IN, gpf2-1, DOWN, LV1); > + PIN(IN, gpf2-2, DOWN, LV1); > + PIN(IN, gpf2-3, DOWN, LV1); > + > + PIN(IN, gpf3-0, DOWN, LV1); > + PIN(IN, gpf3-1, DOWN, LV1); > + PIN(IN, gpf3-2, NONE, LV1); > + PIN(IN, gpf3-3, DOWN, LV1); > + > + PIN(IN, gpf4-0, DOWN, LV1); > + PIN(IN, gpf4-1, DOWN, LV1); > + PIN(IN, gpf4-2, DOWN, LV1); > + PIN(IN, gpf4-3, DOWN, LV1); > + PIN(IN, gpf4-4, DOWN, LV1); > + PIN(IN, gpf4-5, DOWN, LV1); > + PIN(IN, gpf4-6, DOWN, LV1); > + PIN(IN, gpf4-7, DOWN, LV1); > + > + PIN(IN, gpf5-0, DOWN, LV1); > + PIN(IN, gpf5-1, DOWN, LV1); > + PIN(IN, gpf5-2, DOWN, LV1); > + PIN(IN, gpf5-3, DOWN, LV1); > + PIN(OUT, gpf5-4, NONE, LV1); > + PIN(IN, gpf5-5, DOWN, LV1); > + PIN(IN, gpf5-6, DOWN, LV1); > + PIN(IN, gpf5-7, DOWN, LV1); > + }; > + > + te_irq: te_irq { > + samsung,pins = "gpf1-3"; > + samsung,pin-function = <0xf>; > + }; > +}; > + > +&pinctrl_cpif { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_cpif>; > + > + initial_cpif: initial-state { > + PIN(IN, gpv6-0, DOWN, LV1); > + PIN(IN, gpv6-1, DOWN, LV1); > + }; > +}; > + > +&pinctrl_ese { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_ese>; > + > + initial_ese: initial-state { > + PIN(IN, gpj2-0, DOWN, LV1); > + PIN(IN, gpj2-1, DOWN, LV1); > + PIN(IN, gpj2-2, DOWN, LV1); > + }; > +}; > + > +&pinctrl_fsys { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_fsys>; > + > + initial_fsys: initial-state { > + PIN(IN, gpr3-0, NONE, LV1); > + PIN(IN, gpr3-1, DOWN, LV1); > + PIN(IN, gpr3-2, DOWN, LV1); > + PIN(IN, gpr3-3, DOWN, LV1); > + PIN(IN, gpr3-7, NONE, LV1); > + }; > +}; > + > +&pinctrl_imem { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_imem>; > + > + initial_imem: initial-state { > + PIN(IN, gpf0-0, UP, LV1); > + PIN(IN, gpf0-1, UP, LV1); > + PIN(IN, gpf0-2, DOWN, LV1); > + PIN(IN, gpf0-3, UP, LV1); > + PIN(IN, gpf0-4, DOWN, LV1); > + PIN(IN, gpf0-5, NONE, LV1); > + PIN(IN, gpf0-6, DOWN, LV1); > + PIN(IN, gpf0-7, UP, LV1); > + }; > +}; > + > +&pinctrl_nfc { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_nfc>; > + > + initial_nfc: initial-state { > + PIN(IN, gpj0-2, DOWN, LV1); > + }; > +}; > + > +&pinctrl_peric { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_peric>; > + > + initial_peric: initial-state { > + PIN(IN, gpv7-0, DOWN, LV1); > + PIN(IN, gpv7-1, DOWN, LV1); > + PIN(IN, gpv7-2, NONE, LV1); > + PIN(IN, gpv7-3, DOWN, LV1); > + PIN(IN, gpv7-4, DOWN, LV1); > + PIN(IN, gpv7-5, DOWN, LV1); > + > + PIN(IN, gpb0-4, DOWN, LV1); > + > + PIN(IN, gpc0-2, DOWN, LV1); > + PIN(IN, gpc0-5, DOWN, LV1); > + PIN(IN, gpc0-7, DOWN, LV1); > + > + PIN(IN, gpc1-1, DOWN, LV1); > + > + PIN(IN, gpc3-4, NONE, LV1); > + PIN(IN, gpc3-5, NONE, LV1); > + PIN(IN, gpc3-6, NONE, LV1); > + PIN(IN, gpc3-7, NONE, LV1); > + > + PIN(OUT, gpg0-0, NONE, LV1); > + PIN(FUNC1, gpg0-1, DOWN, LV1); > + > + PIN(IN, gpd2-5, DOWN, LV1); > + > + PIN(IN, gpd4-0, NONE, LV1); > + PIN(IN, gpd4-1, DOWN, LV1); > + PIN(IN, gpd4-2, DOWN, LV1); > + PIN(IN, gpd4-3, DOWN, LV1); > + PIN(IN, gpd4-4, DOWN, LV1); > + > + PIN(IN, gpd6-3, DOWN, LV1); > + > + PIN(IN, gpd8-1, UP, LV1); > + > + PIN(IN, gpg1-0, DOWN, LV1); > + PIN(IN, gpg1-1, DOWN, LV1); > + PIN(IN, gpg1-2, DOWN, LV1); > + PIN(IN, gpg1-3, DOWN, LV1); > + PIN(IN, gpg1-4, DOWN, LV1); > + > + PIN(IN, gpg2-0, DOWN, LV1); > + PIN(IN, gpg2-1, DOWN, LV1); > + > + PIN(IN, gpg3-0, DOWN, LV1); > + PIN(IN, gpg3-1, DOWN, LV1); > + PIN(IN, gpg3-5, DOWN, LV1); > + PIN(IN, gpg3-7, DOWN, LV1); > + }; > +}; > + > +&pinctrl_touch { > + pinctrl-names = "default"; > + pinctrl-0 = <&initial_touch>; > + > + initial_touch: initial-state { > + PIN(IN, gpj1-2, DOWN, LV1); > + }; > +}; > + > +&pwm { > + pinctrl-0 = <&pwm0_out>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&mic { > + status = "okay"; > + > + i80-if-timings { > + }; > +}; > + > +&serial_1 { > + status = "okay"; > +}; > + > +&spi_1 { > + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + wm5110: wm5110-codec@0 { > + compatible = "wlf,wm5110"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + interrupt-parent = <&gpa0>; > + interrupts = <4 0 0>; Why three interrupt cells? Please use also IRQ_TYPE_NONE for flags. > + clocks = <&xxti>, <&s2mps13_osc 2>; s/2/S2MPS11_CLK_BT/ Best regards, Krzysztof
Hi Krzysztof, On 2016년 08월 17일 15:42, Krzysztof Kozlowski wrote: > On 08/16/2016 08:35 AM, Chanwoo Choi wrote: >> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. >> This board fully support the all things for mobile target. >> >> This patch supports the following devices: >> 1. basic SoC >> - Initial booting for Samsung Exynos5433 SoC >> - DRAM LPDDR3 (3GB) >> - eMMC (32GB) >> - ARM architecture timer >> >> 2. power management devices >> - Sasmung S2MPS13 PMIC for the power supply >> - CPUFREQ for big.LITTLE cores >> - TMU for big.LITTLE cores and GPU >> - ADC with thermistor to measure the temperature of AP/Battery/Charger >> - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) >> >> 3. sound devices >> - I2S for sound bus >> - LPASS for sound power control >> - Wolfson WM5110 for sound codec >> - Maxim MAX98504 for speaker amplifier >> - TM2 ASoC Machine device driver node >> >> 3. display devices >> - DECON, DSI and MIC for the panel output >> >> 4. usb devices >> - USB 3.0 DRD (Dual Role Device) >> - USB 3.0 Host controller >> >> 5. storage devices >> - MSHC (obile Storae Host Controller) for eMMC device > > Mobile Storage OK. > >> >> 6. misc devices >> - gpio-keys (power, volume up/down, home key) >> - PWM (Pulse Width Modulation Timer) >> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> >> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> >> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> >> Signed-off-by: Inha Song <ideal.song@samsung.com> >> Signed-off-by: Ingi kim <ingi2.kim@samsung.com> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> .../bindings/arm/samsung/samsung-boards.txt | 1 + >> arch/arm64/boot/dts/exynos/Makefile | 5 +- >> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ >> 3 files changed, 1008 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> index 0ea7f14ef294..c704b4bf6137 100644 >> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> @@ -15,6 +15,7 @@ Required root node properties: >> - "samsung,xyref5260" - for Exynos5260-based Samsung board. >> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. >> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. >> + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. >> - "samsung,sd5v1" - for Exynos5440-based Samsung board. >> - "samsung,ssdk5440" - for Exynos5440-based Samsung board. >> >> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile >> index 50c9b9383cfa..7ddea53769a7 100644 >> --- a/arch/arm64/boot/dts/exynos/Makefile >> +++ b/arch/arm64/boot/dts/exynos/Makefile >> @@ -1,4 +1,7 @@ >> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb >> +dtb-$(CONFIG_ARCH_EXYNOS) += \ >> + exynos5433-tm2.dtb \ >> + exynos5433-tm2e.dtb \ >> + exynos7-espresso.dtb >> >> always := $(dtb-y) >> subdir-y := $(dts-dirs) >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> new file mode 100644 >> index 000000000000..3e497b0d0015 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> @@ -0,0 +1,1003 @@ >> +/* >> + * SAMSUNG Exynos5433 TM2 board device tree source >> + * >> + * Copyright (c) 2016 Samsung Electronics Co., Ltd. >> + * >> + * Device tree source file for Samsung's TM2 board which is based on >> + * Samsung Exynos5433 SoC. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +/dts-v1/; >> +#include "exynos5433.dtsi" >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/input/input.h> >> + >> +/ { >> + model = "Samsung TM2 board"; >> + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; >> + >> + aliases { >> + i2c0 = &hsi2c_0; >> + i2c1 = &hsi2c_1; >> + i2c2 = &hsi2c_2; >> + i2c3 = &hsi2c_3; >> + i2c4 = &hsi2c_4; >> + i2c5 = &hsi2c_5; >> + i2c6 = &hsi2c_6; >> + i2c7 = &hsi2c_7; >> + i2c8 = &hsi2c_8; >> + i2c9 = &hsi2c_9; >> + i2c10 = &hsi2c_10; >> + i2c11 = &hsi2c_11; >> + mshc0 = &mshc_0; >> + mshc1 = &mshc_1; >> + mshc2 = &mshc_2; >> + pinctrl0 = &pinctrl_alive; >> + pinctrl1 = &pinctrl_aud; >> + pinctrl2 = &pinctrl_cpif; >> + pinctrl3 = &pinctrl_ese; >> + pinctrl4 = &pinctrl_finger; >> + pinctrl5 = &pinctrl_fsys; >> + pinctrl6 = &pinctrl_imem; >> + pinctrl7 = &pinctrl_nfc; >> + pinctrl8 = &pinctrl_peric; >> + pinctrl9 = &pinctrl_touch; >> + serial0 = &serial_0; >> + serial1 = &serial_1; >> + serial2 = &serial_2; >> + serial3 = &serial_3; >> + spi0 = &spi_0; >> + spi1 = &spi_1; >> + spi2 = &spi_2; >> + spi3 = &spi_3; >> + spi4 = &spi_4; >> + usbdrdphy0 = &usbdrd30_phy; >> + }; >> + >> + chosen { >> + stdout-path = &serial_1; >> + }; >> + >> + memory@20000000 { >> + device_type = "memory"; >> + reg = <0x0 0x20000000 0x0 0xc0000000>; >> + }; >> + >> + gpio_keys { >> + compatible = "gpio-keys"; >> + >> + power_key { >> + gpios = <&gpa2 7 1>; > > s/1/GPIO_ACTIVE_LOW/ OK. > >> + linux,code = <KEY_POWER>; >> + label = "power key"; >> + debounce-interval = <10>; >> + gpio-key,wakeup; >> + }; >> + >> + volume_up_key { >> + gpios = <&gpa2 0 1>; > > s/1/GPIO_ACTIVE_LOW/ OK. > >> + linux,code = <KEY_VOLUMEUP>; >> + label = "volume-up key"; >> + debounce-interval = <10>; >> + }; >> + >> + volume_down_key { >> + gpios = <&gpa2 1 1>; > > s/1/GPIO_ACTIVE_LOW/ OK. > >> + linux,code = <KEY_VOLUMEDOWN>; >> + label = "volume-down key"; >> + debounce-interval = <10>; >> + }; >> + >> + homepage_key { >> + gpios = <&gpa0 3 1>; > > s/1/GPIO_ACTIVE_LOW/ OK. > >> + linux,code = <KEY_MENU>; >> + label = "homepage key"; >> + debounce-interval = <10>; >> + }; >> + }; >> + >> + i2c_max98504: i2c-gpio-0 { >> + compatible = "i2c-gpio"; >> + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ >> + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; >> + i2c-gpio,delay-us = <2>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; >> + >> + max98504: max98504@31 { >> + compatible = "maxim,max98504"; >> + reg = <0x31>; >> + maxim,rx-path = <1>; >> + maxim,tx-path = <1>; >> + maxim,tx-channel-mask = <3>; >> + maxim,tx-channel-source = <2>; >> + }; >> + }; >> + >> + sound { >> + compatible = "samsung,tm2-audio"; >> + audio-codec = <&wm5110>; >> + i2s-controller = <&i2s0>; >> + audio-amplifier = <&max98504>; >> + mic-bias-gpios = <&gpr3 2 0>; > > s/0/GPIO_ACTIVE_HIGH/ OK. > >> + model = "wm5110"; >> + samsung,audio-routing = >> + /* Headphone */ >> + "HP", "HPOUT1L", >> + "HP", "HPOUT1R", >> + >> + /* Speaker */ >> + "SPK", "SPKOUT", >> + "SPKOUT", "HPOUT2L", >> + "SPKOUT", "HPOUT2R", >> + >> + /* Receiver */ >> + "RCV", "HPOUT3L", >> + "RCV", "HPOUT3R"; >> + status = "okay"; >> + }; >> +}; >> + >> +&adc { >> + vdd-supply = <&ldo3_reg>; >> + status = "okay"; >> + >> + thermistor-ap { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 0>; >> + }; >> + >> + thermistor_battery: thermistor-battery { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 1>; >> + #thermal-sensor-cells = <0>; >> + }; >> + >> + thermistor-charger { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 2>; >> + }; >> +}; >> + >> +&cpu0 { >> + cpu-supply = <&buck3_reg>; >> +}; >> + >> +&cpu4 { >> + cpu-supply = <&buck2_reg>; >> +}; >> + >> +&decon { >> + status = "okay"; >> + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; >> + >> + i80-if-timings { >> + }; >> +}; >> + >> +&dsi { >> + status = "okay"; >> + vddcore-supply = <&ldo6_reg>; >> + vddio-supply = <&ldo7_reg>; >> + samsung,pll-clock-frequency = <24000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&te_irq>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@1 { >> + reg = <1>; >> + >> + dsi_out: endpoint { >> + samsung,burst-clock-frequency = <512000000>; >> + samsung,esc-clock-frequency = <16000000>; >> + }; >> + }; >> + }; >> +}; >> + >> +&hsi2c_0 { >> + status = "okay"; >> + clock-frequency = <2500000>; >> + >> + s2mps13_pmic@66 { >> + compatible = "samsung,s2mps13-pmic"; >> + interrupt-parent = <&gpa0>; >> + interrupts = <7 0>; > > s/0/IRQ_TYPE_NONE/ OK. > >> + reg = <0x66>; >> + wakeup; > > I think there is no such "wakeup" property. I'll remove it. > >> + samsung,s2mps11-wrstbi-ground; >> + >> + s2mps13_osc: clocks { >> + compatible = "samsung,s2mps13-clk"; >> + #clock-cells = <1>; >> + clock-output-names = "s2mps13_ap", "s2mps13_cp", >> + "s2mps13_bt"; >> + }; >> + >> + regulators { >> + ldo1_reg: LDO1 { >> + regulator-name = "VDD_ALIVE_0.9V_AP"; >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <900000>; >> + regulator-always-on; >> + }; >> + >> + ldo2_reg: LDO2 { >> + regulator-name = "VDDQ_MMC2_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo3_reg: LDO3 { >> + regulator-name = "VDD1_E_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo4_reg: LDO4 { >> + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; >> + regulator-min-microvolt = <1300000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo5_reg: LDO5 { >> + regulator-name = "VDD10_DPLL_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo6_reg: LDO6 { >> + regulator-name = "VDD10_MIPI2L_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo7_reg: LDO7 { >> + regulator-name = "VDD18_MIPI2L_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo8_reg: LDO8 { >> + regulator-name = "VDD18_LLI_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo9_reg: LDO9 { >> + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo10_reg: LDO10 { >> + regulator-name = "VDD33_USB30_3.0V_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo11_reg: LDO11 { >> + regulator-name = "VDD_INT_M_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo12_reg: LDO12 { >> + regulator-name = "VDD_KFC_M_1.1V_AP"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-always-on; >> + }; >> + >> + ldo13_reg: LDO13 { >> + regulator-name = "VDD_G3D_M_0.95V_AP"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <950000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo14_reg: LDO14 { >> + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo15_reg: LDO15 { >> + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo16_reg: LDO16 { >> + regulator-name = "VDDQ_EFUSE"; >> + regulator-min-microvolt = <1400000>; >> + regulator-max-microvolt = <3400000>; >> + regulator-always-on; >> + }; >> + >> + ldo17_reg: LDO17 { >> + regulator-name = "V_TFLASH_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo18_reg: LDO18 { >> + regulator-name = "V_CODEC_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo19_reg: LDO19 { >> + regulator-name = "VDDA_1.8V_COMP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo20_reg: LDO20 { >> + regulator-name = "VCC_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-always-on; >> + }; >> + >> + ldo21_reg: LDO21 { >> + regulator-name = "VT_CAM_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo22_reg: LDO22 { >> + regulator-name = "CAM_IO_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo23_reg: LDO23 { >> + regulator-name = "CAM_SEN_CORE_1.2V_AP"; >> + regulator-min-microvolt = <1050000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + ldo24_reg: LDO24 { >> + regulator-name = "VT_CAM_1.2V"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + ldo25_reg: LDO25 { >> + regulator-name = "CAM_SEN_A2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo26_reg: LDO26 { >> + regulator-name = "CAM_AF_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo27_reg: LDO27 { >> + regulator-name = "VCC_3.0V_LCD_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + }; >> + >> + ldo28_reg: LDO28 { >> + regulator-name = "VCC_1.8V_LCD_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo29_reg: LDO29 { >> + regulator-name = "VT_CAM_2.8V"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + }; >> + >> + ldo30_reg: LDO30 { >> + regulator-name = "TSP_AVDD_3.3V_AP"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> + >> + ldo31_reg: LDO31 { >> + regulator-name = "TSP_VDD_1.85V_AP"; >> + regulator-min-microvolt = <1850000>; >> + regulator-max-microvolt = <1850000>; >> + regulator-boot-on; >> + }; >> + >> + ldo32_reg: LDO32 { >> + regulator-name = "VTOUCH_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-boot-on; >> + }; >> + >> + ldo33_reg: LDO33 { >> + regulator-name = "VTOUCH_LED_3.3V"; >> + regulator-min-microvolt = <2500000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + }; >> + >> + ldo34_reg: LDO34 { >> + regulator-name = "VCC_1.8V_MHL_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <2100000>; >> + }; >> + >> + ldo35_reg: LDO35 { >> + regulator-name = "OIS_VM_2.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo36_reg: LDO36 { >> + regulator-name = "VSIL_1.0V"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + }; >> + >> + ldo37_reg: LDO37 { >> + regulator-name = "VF_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo38_reg: LDO38 { >> + regulator-name = "VCC_3.0V_MOTOR_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + }; >> + >> + ldo39_reg: LDO39 { >> + regulator-name = "V_HRM_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo40_reg: LDO40 { >> + regulator-name = "V_HRM_3.3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> + >> + buck1_reg: BUCK1 { >> + regulator-name = "VDD_MIF_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck2_reg: BUCK2 { >> + regulator-name = "VDD_EGL_1.0V_AP"; >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck3_reg: BUCK3 { >> + regulator-name = "VDD_KFC_1.0V_AP"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck4_reg: BUCK4 { >> + regulator-name = "VDD_INT_0.95V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck5_reg: BUCK5 { >> + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck6_reg: BUCK6 { >> + regulator-name = "VDD_G3D_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck7_reg: BUCK7 { >> + regulator-name = "VDD_MEM1_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + }; >> + >> + buck8_reg: BUCK8 { >> + regulator-name = "VDD_LLDO_1.35V_AP"; >> + regulator-min-microvolt = <1350000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + buck9_reg: BUCK9 { >> + regulator-name = "VDD_MLDO_2.0V_AP"; >> + regulator-min-microvolt = <1350000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + buck10_reg: BUCK10 { >> + regulator-name = "vdd_mem2"; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + }; >> + }; >> + }; >> +}; >> + >> +&hsi2c_8 { >> + status = "okay"; >> + >> + max77843@66 { >> + compatible = "samsung,max77843"; > > There is no such compatible. It is my mistake. I'll fix it using "maxim,max77843" > >> + interrupt-parent = <&gpa1>; >> + interrupts = <5 2>; > > IRQ_TYPE_EDGE_FALLING OK. > >> + reg = <0x66>; >> + wakeup; > > Ditto - wakeup. I'll remove it. > >> + >> + muic: max77843-muic { >> + compatible = "maxim,max77843-muic"; >> + }; >> + >> + regulators { >> + compatible = "maxim,max77843-regulator"; > > BTW, It's a pity that max77843 submission was not finished. These > compatibles are not documented. Also the charger driver did not reach > mainline. The fuelgauge probably has wrong compatible in MFD driver. The "max77843-regulator"[1] was merged to driver/regulator/max77693-regulator.c. [1] 9e9a08e86733d (regulator: max77693: Add support for MAX77843 device) I know the charger/fuel-gauge was not finished. I'll again post them. So, this patch don't include the charger/fuel-gauge dt node. > >> + safeout1_reg: SAFEOUT1 { >> + regulator-name = "SAFEOUT1"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <4950000>; >> + }; >> + >> + safeout2_reg: SAFEOUT2 { >> + regulator-name = "SAFEOUT2"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <4950000>; >> + }; >> + >> + charger_reg: CHARGER { >> + regulator-name = "CHARGER"; >> + regulator-min-microamp = <100000>; >> + regulator-max-microamp = <3150000>; >> + }; >> + }; >> + >> + haptic: max77843-haptic { >> + compatible = "maxim,max77843-haptic"; >> + haptic-supply = <&ldo38_reg>; >> + pwms = <&pwm 0 33670 0>; >> + pwm-names = "haptic"; >> + }; >> + }; >> +}; >> + >> +&hsi2c_11 { >> + status = "okay"; > > What is inside? How does it work if there is no child device specified? It is unneeded. I'll remove it. > >> +}; >> + >> +&i2s0 { >> + status = "okay"; >> +}; >> + >> +&lpass { >> + status = "okay"; >> +}; >> + >> +&mshc_0 { >> + status = "okay"; >> + num-slots = <1>; >> + broken-cd; >> + non-removable; > > Putting both properties - broken and non-removable - is not supported. > Please choose one. I'll remove the 'broken-cd' property. > >> + card-detect-delay = <200>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <0 4>; >> + samsung,dw-mshc-ddr-timing = <0 2>; >> + samsung,dw-mshc-hs400-timing = <0 3>; >> + samsung,read-strobe-delay = <90>; >> + fifo-depth = <0x80>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>; >> + bus-width = <8>; >> + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; >> + assigned-clock-rates = <800000000>; >> +}; >> + >> +&pinctrl_alive { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_alive>; >> + >> + initial_alive: initial-state { >> + PIN(IN, gpa0-0, DOWN, LV1); >> + PIN(IN, gpa0-1, NONE, LV1); >> + PIN(IN, gpa0-2, DOWN, LV1); >> + PIN(IN, gpa0-3, NONE, LV1); >> + PIN(IN, gpa0-4, NONE, LV1); >> + PIN(IN, gpa0-5, DOWN, LV1); >> + PIN(IN, gpa0-6, NONE, LV1); >> + PIN(IN, gpa0-7, NONE, LV1); >> + >> + PIN(IN, gpa1-0, UP, LV1); >> + PIN(IN, gpa1-1, NONE, LV1); >> + PIN(IN, gpa1-2, NONE, LV1); >> + PIN(IN, gpa1-3, DOWN, LV1); >> + PIN(IN, gpa1-4, DOWN, LV1); >> + PIN(IN, gpa1-5, NONE, LV1); >> + PIN(IN, gpa1-6, NONE, LV1); >> + PIN(IN, gpa1-7, NONE, LV1); >> + >> + PIN(IN, gpa2-0, NONE, LV1); >> + PIN(IN, gpa2-1, NONE, LV1); >> + PIN(IN, gpa2-2, NONE, LV1); >> + PIN(IN, gpa2-3, DOWN, LV1); >> + PIN(IN, gpa2-4, NONE, LV1); >> + PIN(IN, gpa2-5, DOWN, LV1); >> + PIN(IN, gpa2-6, DOWN, LV1); >> + PIN(IN, gpa2-7, NONE, LV1); >> + >> + PIN(IN, gpa3-0, DOWN, LV1); >> + PIN(IN, gpa3-1, DOWN, LV1); >> + PIN(IN, gpa3-2, NONE, LV1); >> + PIN(IN, gpa3-3, DOWN, LV1); >> + PIN(IN, gpa3-4, NONE, LV1); >> + PIN(IN, gpa3-5, DOWN, LV1); >> + PIN(IN, gpa3-6, DOWN, LV1); >> + PIN(IN, gpa3-7, DOWN, LV1); >> + >> + PIN(IN, gpf1-0, NONE, LV1); >> + PIN(IN, gpf1-1, NONE, LV1); >> + PIN(IN, gpf1-2, DOWN, LV1); >> + PIN(IN, gpf1-4, UP, LV1); >> + PIN(OUT, gpf1-5, NONE, LV1); >> + PIN(IN, gpf1-6, DOWN, LV1); >> + PIN(IN, gpf1-7, DOWN, LV1); >> + >> + PIN(IN, gpf2-0, DOWN, LV1); >> + PIN(IN, gpf2-1, DOWN, LV1); >> + PIN(IN, gpf2-2, DOWN, LV1); >> + PIN(IN, gpf2-3, DOWN, LV1); >> + >> + PIN(IN, gpf3-0, DOWN, LV1); >> + PIN(IN, gpf3-1, DOWN, LV1); >> + PIN(IN, gpf3-2, NONE, LV1); >> + PIN(IN, gpf3-3, DOWN, LV1); >> + >> + PIN(IN, gpf4-0, DOWN, LV1); >> + PIN(IN, gpf4-1, DOWN, LV1); >> + PIN(IN, gpf4-2, DOWN, LV1); >> + PIN(IN, gpf4-3, DOWN, LV1); >> + PIN(IN, gpf4-4, DOWN, LV1); >> + PIN(IN, gpf4-5, DOWN, LV1); >> + PIN(IN, gpf4-6, DOWN, LV1); >> + PIN(IN, gpf4-7, DOWN, LV1); >> + >> + PIN(IN, gpf5-0, DOWN, LV1); >> + PIN(IN, gpf5-1, DOWN, LV1); >> + PIN(IN, gpf5-2, DOWN, LV1); >> + PIN(IN, gpf5-3, DOWN, LV1); >> + PIN(OUT, gpf5-4, NONE, LV1); >> + PIN(IN, gpf5-5, DOWN, LV1); >> + PIN(IN, gpf5-6, DOWN, LV1); >> + PIN(IN, gpf5-7, DOWN, LV1); >> + }; >> + >> + te_irq: te_irq { >> + samsung,pins = "gpf1-3"; >> + samsung,pin-function = <0xf>; >> + }; >> +}; >> + >> +&pinctrl_cpif { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_cpif>; >> + >> + initial_cpif: initial-state { >> + PIN(IN, gpv6-0, DOWN, LV1); >> + PIN(IN, gpv6-1, DOWN, LV1); >> + }; >> +}; >> + >> +&pinctrl_ese { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_ese>; >> + >> + initial_ese: initial-state { >> + PIN(IN, gpj2-0, DOWN, LV1); >> + PIN(IN, gpj2-1, DOWN, LV1); >> + PIN(IN, gpj2-2, DOWN, LV1); >> + }; >> +}; >> + >> +&pinctrl_fsys { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_fsys>; >> + >> + initial_fsys: initial-state { >> + PIN(IN, gpr3-0, NONE, LV1); >> + PIN(IN, gpr3-1, DOWN, LV1); >> + PIN(IN, gpr3-2, DOWN, LV1); >> + PIN(IN, gpr3-3, DOWN, LV1); >> + PIN(IN, gpr3-7, NONE, LV1); >> + }; >> +}; >> + >> +&pinctrl_imem { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_imem>; >> + >> + initial_imem: initial-state { >> + PIN(IN, gpf0-0, UP, LV1); >> + PIN(IN, gpf0-1, UP, LV1); >> + PIN(IN, gpf0-2, DOWN, LV1); >> + PIN(IN, gpf0-3, UP, LV1); >> + PIN(IN, gpf0-4, DOWN, LV1); >> + PIN(IN, gpf0-5, NONE, LV1); >> + PIN(IN, gpf0-6, DOWN, LV1); >> + PIN(IN, gpf0-7, UP, LV1); >> + }; >> +}; >> + >> +&pinctrl_nfc { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_nfc>; >> + >> + initial_nfc: initial-state { >> + PIN(IN, gpj0-2, DOWN, LV1); >> + }; >> +}; >> + >> +&pinctrl_peric { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_peric>; >> + >> + initial_peric: initial-state { >> + PIN(IN, gpv7-0, DOWN, LV1); >> + PIN(IN, gpv7-1, DOWN, LV1); >> + PIN(IN, gpv7-2, NONE, LV1); >> + PIN(IN, gpv7-3, DOWN, LV1); >> + PIN(IN, gpv7-4, DOWN, LV1); >> + PIN(IN, gpv7-5, DOWN, LV1); >> + >> + PIN(IN, gpb0-4, DOWN, LV1); >> + >> + PIN(IN, gpc0-2, DOWN, LV1); >> + PIN(IN, gpc0-5, DOWN, LV1); >> + PIN(IN, gpc0-7, DOWN, LV1); >> + >> + PIN(IN, gpc1-1, DOWN, LV1); >> + >> + PIN(IN, gpc3-4, NONE, LV1); >> + PIN(IN, gpc3-5, NONE, LV1); >> + PIN(IN, gpc3-6, NONE, LV1); >> + PIN(IN, gpc3-7, NONE, LV1); >> + >> + PIN(OUT, gpg0-0, NONE, LV1); >> + PIN(FUNC1, gpg0-1, DOWN, LV1); >> + >> + PIN(IN, gpd2-5, DOWN, LV1); >> + >> + PIN(IN, gpd4-0, NONE, LV1); >> + PIN(IN, gpd4-1, DOWN, LV1); >> + PIN(IN, gpd4-2, DOWN, LV1); >> + PIN(IN, gpd4-3, DOWN, LV1); >> + PIN(IN, gpd4-4, DOWN, LV1); >> + >> + PIN(IN, gpd6-3, DOWN, LV1); >> + >> + PIN(IN, gpd8-1, UP, LV1); >> + >> + PIN(IN, gpg1-0, DOWN, LV1); >> + PIN(IN, gpg1-1, DOWN, LV1); >> + PIN(IN, gpg1-2, DOWN, LV1); >> + PIN(IN, gpg1-3, DOWN, LV1); >> + PIN(IN, gpg1-4, DOWN, LV1); >> + >> + PIN(IN, gpg2-0, DOWN, LV1); >> + PIN(IN, gpg2-1, DOWN, LV1); >> + >> + PIN(IN, gpg3-0, DOWN, LV1); >> + PIN(IN, gpg3-1, DOWN, LV1); >> + PIN(IN, gpg3-5, DOWN, LV1); >> + PIN(IN, gpg3-7, DOWN, LV1); >> + }; >> +}; >> + >> +&pinctrl_touch { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&initial_touch>; >> + >> + initial_touch: initial-state { >> + PIN(IN, gpj1-2, DOWN, LV1); >> + }; >> +}; >> + >> +&pwm { >> + pinctrl-0 = <&pwm0_out>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&mic { >> + status = "okay"; >> + >> + i80-if-timings { >> + }; >> +}; >> + >> +&serial_1 { >> + status = "okay"; >> +}; >> + >> +&spi_1 { >> + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> + >> + wm5110: wm5110-codec@0 { >> + compatible = "wlf,wm5110"; >> + reg = <0x0>; >> + spi-max-frequency = <20000000>; >> + interrupt-parent = <&gpa0>; >> + interrupts = <4 0 0>; > > Why three interrupt cells? Please use also IRQ_TYPE_NONE for flags. Two interrupt cells is correct. I check it[2] [2] Documentation/devicetree/bindings/mfd/arizona.txt I'll fix it. > >> + clocks = <&xxti>, <&s2mps13_osc 2>; > > s/2/S2MPS11_CLK_BT/ OK. Best Regards, Chanwoo Choi
On Tue, Aug 16, 2016 at 03:35:27PM +0900, Chanwoo Choi wrote: > This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. > This board fully support the all things for mobile target. > > This patch supports the following devices: > 1. basic SoC > - Initial booting for Samsung Exynos5433 SoC > - DRAM LPDDR3 (3GB) > - eMMC (32GB) > - ARM architecture timer > > 2. power management devices > - Sasmung S2MPS13 PMIC for the power supply > - CPUFREQ for big.LITTLE cores > - TMU for big.LITTLE cores and GPU > - ADC with thermistor to measure the temperature of AP/Battery/Charger > - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) > > 3. sound devices > - I2S for sound bus > - LPASS for sound power control > - Wolfson WM5110 for sound codec > - Maxim MAX98504 for speaker amplifier > - TM2 ASoC Machine device driver node > > 3. display devices > - DECON, DSI and MIC for the panel output > > 4. usb devices > - USB 3.0 DRD (Dual Role Device) > - USB 3.0 Host controller > > 5. storage devices > - MSHC (obile Storae Host Controller) for eMMC device > > 6. misc devices > - gpio-keys (power, volume up/down, home key) > - PWM (Pulse Width Modulation Timer) > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> > Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Inha Song <ideal.song@samsung.com> > Signed-off-by: Ingi kim <ingi2.kim@samsung.com> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > .../bindings/arm/samsung/samsung-boards.txt | 1 + > arch/arm64/boot/dts/exynos/Makefile | 5 +- > arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ > 3 files changed, 1008 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > > diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > index 0ea7f14ef294..c704b4bf6137 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt > @@ -15,6 +15,7 @@ Required root node properties: > - "samsung,xyref5260" - for Exynos5260-based Samsung board. > - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. > - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. > + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. > - "samsung,sd5v1" - for Exynos5440-based Samsung board. > - "samsung,ssdk5440" - for Exynos5440-based Samsung board. > > diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile > index 50c9b9383cfa..7ddea53769a7 100644 > --- a/arch/arm64/boot/dts/exynos/Makefile > +++ b/arch/arm64/boot/dts/exynos/Makefile > @@ -1,4 +1,7 @@ > -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb > +dtb-$(CONFIG_ARCH_EXYNOS) += \ > + exynos5433-tm2.dtb \ > + exynos5433-tm2e.dtb \ > + exynos7-espresso.dtb > > always := $(dtb-y) > subdir-y := $(dts-dirs) > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > new file mode 100644 > index 000000000000..3e497b0d0015 > --- /dev/null > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts > @@ -0,0 +1,1003 @@ > +/* > + * SAMSUNG Exynos5433 TM2 board device tree source > + * > + * Copyright (c) 2016 Samsung Electronics Co., Ltd. > + * > + * Device tree source file for Samsung's TM2 board which is based on > + * Samsung Exynos5433 SoC. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > +#include "exynos5433.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "Samsung TM2 board"; > + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; > + > + aliases { > + i2c0 = &hsi2c_0; > + i2c1 = &hsi2c_1; > + i2c2 = &hsi2c_2; > + i2c3 = &hsi2c_3; > + i2c4 = &hsi2c_4; > + i2c5 = &hsi2c_5; > + i2c6 = &hsi2c_6; > + i2c7 = &hsi2c_7; > + i2c8 = &hsi2c_8; > + i2c9 = &hsi2c_9; > + i2c10 = &hsi2c_10; > + i2c11 = &hsi2c_11; > + mshc0 = &mshc_0; > + mshc1 = &mshc_1; > + mshc2 = &mshc_2; > + pinctrl0 = &pinctrl_alive; > + pinctrl1 = &pinctrl_aud; > + pinctrl2 = &pinctrl_cpif; > + pinctrl3 = &pinctrl_ese; > + pinctrl4 = &pinctrl_finger; > + pinctrl5 = &pinctrl_fsys; > + pinctrl6 = &pinctrl_imem; > + pinctrl7 = &pinctrl_nfc; > + pinctrl8 = &pinctrl_peric; > + pinctrl9 = &pinctrl_touch; > + serial0 = &serial_0; > + serial1 = &serial_1; > + serial2 = &serial_2; > + serial3 = &serial_3; > + spi0 = &spi_0; > + spi1 = &spi_1; > + spi2 = &spi_2; > + spi3 = &spi_3; > + spi4 = &spi_4; > + usbdrdphy0 = &usbdrd30_phy; Please drop all these aliases except for serial. > + }; > + > + chosen { > + stdout-path = &serial_1; > + }; > + > + memory@20000000 { > + device_type = "memory"; > + reg = <0x0 0x20000000 0x0 0xc0000000>; > + }; > + > + gpio_keys { Use -, not _. > + compatible = "gpio-keys"; > + > + power_key { ditto... > + gpios = <&gpa2 7 1>; > + linux,code = <KEY_POWER>; > + label = "power key"; > + debounce-interval = <10>; > + gpio-key,wakeup; This is legacy. Use the common binding. > + }; > + > + volume_up_key { > + gpios = <&gpa2 0 1>; > + linux,code = <KEY_VOLUMEUP>; > + label = "volume-up key"; > + debounce-interval = <10>; > + }; > + > + volume_down_key { > + gpios = <&gpa2 1 1>; > + linux,code = <KEY_VOLUMEDOWN>; > + label = "volume-down key"; > + debounce-interval = <10>; > + }; > + > + homepage_key { > + gpios = <&gpa0 3 1>; > + linux,code = <KEY_MENU>; > + label = "homepage key"; > + debounce-interval = <10>; > + }; > + }; > + > + i2c_max98504: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ > + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; > + i2c-gpio,delay-us = <2>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + max98504: max98504@31 { > + compatible = "maxim,max98504"; > + reg = <0x31>; > + maxim,rx-path = <1>; > + maxim,tx-path = <1>; > + maxim,tx-channel-mask = <3>; > + maxim,tx-channel-source = <2>; > + }; > + }; > + > + sound { > + compatible = "samsung,tm2-audio"; > + audio-codec = <&wm5110>; > + i2s-controller = <&i2s0>; > + audio-amplifier = <&max98504>; > + mic-bias-gpios = <&gpr3 2 0>; > + model = "wm5110"; > + samsung,audio-routing = > + /* Headphone */ > + "HP", "HPOUT1L", > + "HP", "HPOUT1R", > + > + /* Speaker */ > + "SPK", "SPKOUT", > + "SPKOUT", "HPOUT2L", > + "SPKOUT", "HPOUT2R", > + > + /* Receiver */ > + "RCV", "HPOUT3L", > + "RCV", "HPOUT3R"; > + status = "okay"; > + }; > +}; > + > +&adc { > + vdd-supply = <&ldo3_reg>; > + status = "okay"; > + > + thermistor-ap { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 0>; > + }; > + > + thermistor_battery: thermistor-battery { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 1>; > + #thermal-sensor-cells = <0>; > + }; > + > + thermistor-charger { > + compatible = "ntc,ncp03wf104"; > + pullup-uv = <1800000>; > + pullup-ohm = <100000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 2>; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&buck3_reg>; > +}; > + > +&cpu4 { > + cpu-supply = <&buck2_reg>; > +}; > + > +&decon { > + status = "okay"; > + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; > + > + i80-if-timings { > + }; > +}; > + > +&dsi { > + status = "okay"; > + vddcore-supply = <&ldo6_reg>; > + vddio-supply = <&ldo7_reg>; > + samsung,pll-clock-frequency = <24000000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&te_irq>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + > + dsi_out: endpoint { > + samsung,burst-clock-frequency = <512000000>; > + samsung,esc-clock-frequency = <16000000>; > + }; > + }; > + }; > +}; > + > +&hsi2c_0 { > + status = "okay"; > + clock-frequency = <2500000>; > + > + s2mps13_pmic@66 { Use '-' > + compatible = "samsung,s2mps13-pmic"; > + interrupt-parent = <&gpa0>; > + interrupts = <7 0>; > + reg = <0x66>; > + wakeup; Use the common binding. > + samsung,s2mps11-wrstbi-ground; > + > + s2mps13_osc: clocks { > + compatible = "samsung,s2mps13-clk"; > + #clock-cells = <1>; > + clock-output-names = "s2mps13_ap", "s2mps13_cp", > + "s2mps13_bt"; > + }; > + > + regulators { > + ldo1_reg: LDO1 { > + regulator-name = "VDD_ALIVE_0.9V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-always-on; > + }; > + > + ldo2_reg: LDO2 { > + regulator-name = "VDDQ_MMC2_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo3_reg: LDO3 { > + regulator-name = "VDD1_E_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo4_reg: LDO4 { > + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo5_reg: LDO5 { > + regulator-name = "VDD10_DPLL_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo6_reg: LDO6 { > + regulator-name = "VDD10_MIPI2L_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo7_reg: LDO7 { > + regulator-name = "VDD18_MIPI2L_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo8_reg: LDO8 { > + regulator-name = "VDD18_LLI_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo9_reg: LDO9 { > + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo10_reg: LDO10 { > + regulator-name = "VDD33_USB30_3.0V_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo11_reg: LDO11 { > + regulator-name = "VDD_INT_M_1.0V_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo12_reg: LDO12 { > + regulator-name = "VDD_KFC_M_1.1V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + ldo13_reg: LDO13 { > + regulator-name = "VDD_G3D_M_0.95V_AP"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <950000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo14_reg: LDO14 { > + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo15_reg: LDO15 { > + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + ldo16_reg: LDO16 { > + regulator-name = "VDDQ_EFUSE"; > + regulator-min-microvolt = <1400000>; > + regulator-max-microvolt = <3400000>; > + regulator-always-on; > + }; > + > + ldo17_reg: LDO17 { > + regulator-name = "V_TFLASH_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo18_reg: LDO18 { > + regulator-name = "V_CODEC_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo19_reg: LDO19 { > + regulator-name = "VDDA_1.8V_COMP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo20_reg: LDO20 { > + regulator-name = "VCC_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + }; > + > + ldo21_reg: LDO21 { > + regulator-name = "VT_CAM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo22_reg: LDO22 { > + regulator-name = "CAM_IO_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo23_reg: LDO23 { > + regulator-name = "CAM_SEN_CORE_1.2V_AP"; > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo24_reg: LDO24 { > + regulator-name = "VT_CAM_1.2V"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + ldo25_reg: LDO25 { > + regulator-name = "CAM_SEN_A2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo26_reg: LDO26 { > + regulator-name = "CAM_AF_2.8V_AP"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo27_reg: LDO27 { > + regulator-name = "VCC_3.0V_LCD_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + ldo28_reg: LDO28 { > + regulator-name = "VCC_1.8V_LCD_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo29_reg: LDO29 { > + regulator-name = "VT_CAM_2.8V"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + ldo30_reg: LDO30 { > + regulator-name = "TSP_AVDD_3.3V_AP"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + ldo31_reg: LDO31 { > + regulator-name = "TSP_VDD_1.85V_AP"; > + regulator-min-microvolt = <1850000>; > + regulator-max-microvolt = <1850000>; > + regulator-boot-on; > + }; > + > + ldo32_reg: LDO32 { > + regulator-name = "VTOUCH_1.8V_AP"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + ldo33_reg: LDO33 { > + regulator-name = "VTOUCH_LED_3.3V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <3300000>; > + regulator-ramp-delay = <12500>; > + }; > + > + ldo34_reg: LDO34 { > + regulator-name = "VCC_1.8V_MHL_AP"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <2100000>; > + }; > + > + ldo35_reg: LDO35 { > + regulator-name = "OIS_VM_2.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + }; > + > + ldo36_reg: LDO36 { > + regulator-name = "VSIL_1.0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + ldo37_reg: LDO37 { > + regulator-name = "VF_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + ldo38_reg: LDO38 { > + regulator-name = "VCC_3.0V_MOTOR_AP"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + }; > + > + ldo39_reg: LDO39 { > + regulator-name = "V_HRM_1.8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + ldo40_reg: LDO40 { > + regulator-name = "V_HRM_3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + buck1_reg: BUCK1 { > + regulator-name = "VDD_MIF_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck2_reg: BUCK2 { > + regulator-name = "VDD_EGL_1.0V_AP"; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck3_reg: BUCK3 { > + regulator-name = "VDD_KFC_1.0V_AP"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck4_reg: BUCK4 { > + regulator-name = "VDD_INT_0.95V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck5_reg: BUCK5 { > + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck6_reg: BUCK6 { > + regulator-name = "VDD_G3D_0.9V_AP"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + buck7_reg: BUCK7 { > + regulator-name = "VDD_MEM1_1.2V_AP"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + buck8_reg: BUCK8 { > + regulator-name = "VDD_LLDO_1.35V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck9_reg: BUCK9 { > + regulator-name = "VDD_MLDO_2.0V_AP"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + buck10_reg: BUCK10 { > + regulator-name = "vdd_mem2"; > + regulator-min-microvolt = <550000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&hsi2c_8 { > + status = "okay"; > + > + max77843@66 { > + compatible = "samsung,max77843"; > + interrupt-parent = <&gpa1>; > + interrupts = <5 2>; > + reg = <0x66>; > + wakeup; Use common binding. > + > + muic: max77843-muic { > + compatible = "maxim,max77843-muic"; > + };
Hi Rob, On 2016년 08월 19일 04:08, Rob Herring wrote: > On Tue, Aug 16, 2016 at 03:35:27PM +0900, Chanwoo Choi wrote: >> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. >> This board fully support the all things for mobile target. >> >> This patch supports the following devices: >> 1. basic SoC >> - Initial booting for Samsung Exynos5433 SoC >> - DRAM LPDDR3 (3GB) >> - eMMC (32GB) >> - ARM architecture timer >> >> 2. power management devices >> - Sasmung S2MPS13 PMIC for the power supply >> - CPUFREQ for big.LITTLE cores >> - TMU for big.LITTLE cores and GPU >> - ADC with thermistor to measure the temperature of AP/Battery/Charger >> - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) >> >> 3. sound devices >> - I2S for sound bus >> - LPASS for sound power control >> - Wolfson WM5110 for sound codec >> - Maxim MAX98504 for speaker amplifier >> - TM2 ASoC Machine device driver node >> >> 3. display devices >> - DECON, DSI and MIC for the panel output >> >> 4. usb devices >> - USB 3.0 DRD (Dual Role Device) >> - USB 3.0 Host controller >> >> 5. storage devices >> - MSHC (obile Storae Host Controller) for eMMC device >> >> 6. misc devices >> - gpio-keys (power, volume up/down, home key) >> - PWM (Pulse Width Modulation Timer) >> >> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> >> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> >> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> >> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> >> Signed-off-by: Inha Song <ideal.song@samsung.com> >> Signed-off-by: Ingi kim <ingi2.kim@samsung.com> >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> >> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> >> --- >> .../bindings/arm/samsung/samsung-boards.txt | 1 + >> arch/arm64/boot/dts/exynos/Makefile | 5 +- >> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ >> 3 files changed, 1008 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> index 0ea7f14ef294..c704b4bf6137 100644 >> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt >> @@ -15,6 +15,7 @@ Required root node properties: >> - "samsung,xyref5260" - for Exynos5260-based Samsung board. >> - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. >> - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. >> + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. >> - "samsung,sd5v1" - for Exynos5440-based Samsung board. >> - "samsung,ssdk5440" - for Exynos5440-based Samsung board. >> >> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile >> index 50c9b9383cfa..7ddea53769a7 100644 >> --- a/arch/arm64/boot/dts/exynos/Makefile >> +++ b/arch/arm64/boot/dts/exynos/Makefile >> @@ -1,4 +1,7 @@ >> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb >> +dtb-$(CONFIG_ARCH_EXYNOS) += \ >> + exynos5433-tm2.dtb \ >> + exynos5433-tm2e.dtb \ >> + exynos7-espresso.dtb >> >> always := $(dtb-y) >> subdir-y := $(dts-dirs) >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> new file mode 100644 >> index 000000000000..3e497b0d0015 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts >> @@ -0,0 +1,1003 @@ >> +/* >> + * SAMSUNG Exynos5433 TM2 board device tree source >> + * >> + * Copyright (c) 2016 Samsung Electronics Co., Ltd. >> + * >> + * Device tree source file for Samsung's TM2 board which is based on >> + * Samsung Exynos5433 SoC. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +/dts-v1/; >> +#include "exynos5433.dtsi" >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/input/input.h> >> + >> +/ { >> + model = "Samsung TM2 board"; >> + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; >> + >> + aliases { >> + i2c0 = &hsi2c_0; >> + i2c1 = &hsi2c_1; >> + i2c2 = &hsi2c_2; >> + i2c3 = &hsi2c_3; >> + i2c4 = &hsi2c_4; >> + i2c5 = &hsi2c_5; >> + i2c6 = &hsi2c_6; >> + i2c7 = &hsi2c_7; >> + i2c8 = &hsi2c_8; >> + i2c9 = &hsi2c_9; >> + i2c10 = &hsi2c_10; >> + i2c11 = &hsi2c_11; >> + mshc0 = &mshc_0; >> + mshc1 = &mshc_1; >> + mshc2 = &mshc_2; >> + pinctrl0 = &pinctrl_alive; >> + pinctrl1 = &pinctrl_aud; >> + pinctrl2 = &pinctrl_cpif; >> + pinctrl3 = &pinctrl_ese; >> + pinctrl4 = &pinctrl_finger; >> + pinctrl5 = &pinctrl_fsys; >> + pinctrl6 = &pinctrl_imem; >> + pinctrl7 = &pinctrl_nfc; >> + pinctrl8 = &pinctrl_peric; >> + pinctrl9 = &pinctrl_touch; >> + serial0 = &serial_0; >> + serial1 = &serial_1; >> + serial2 = &serial_2; >> + serial3 = &serial_3; >> + spi0 = &spi_0; >> + spi1 = &spi_1; >> + spi2 = &spi_2; >> + spi3 = &spi_3; >> + spi4 = &spi_4; >> + usbdrdphy0 = &usbdrd30_phy; > > Please drop all these aliases except for serial. I'll remain the pinctrl/spi/serial and then drop the else aliases. The alias id pinctrl/spi/serial are used. > >> + }; >> + >> + chosen { >> + stdout-path = &serial_1; >> + }; >> + >> + memory@20000000 { >> + device_type = "memory"; >> + reg = <0x0 0x20000000 0x0 0xc0000000>; >> + }; >> + >> + gpio_keys { > > Use -, not _. OK. >> + compatible = "gpio-keys"; >> + >> + power_key { > > ditto... OK. > >> + gpios = <&gpa2 7 1>; >> + linux,code = <KEY_POWER>; >> + label = "power key"; >> + debounce-interval = <10>; >> + gpio-key,wakeup; > > This is legacy. Use the common binding. I'll remove it. > >> + }; >> + >> + volume_up_key { >> + gpios = <&gpa2 0 1>; >> + linux,code = <KEY_VOLUMEUP>; >> + label = "volume-up key"; >> + debounce-interval = <10>; >> + }; >> + >> + volume_down_key { >> + gpios = <&gpa2 1 1>; >> + linux,code = <KEY_VOLUMEDOWN>; >> + label = "volume-down key"; >> + debounce-interval = <10>; >> + }; >> + >> + homepage_key { >> + gpios = <&gpa0 3 1>; >> + linux,code = <KEY_MENU>; >> + label = "homepage key"; >> + debounce-interval = <10>; >> + }; >> + }; >> + >> + i2c_max98504: i2c-gpio-0 { >> + compatible = "i2c-gpio"; >> + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ >> + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; >> + i2c-gpio,delay-us = <2>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; >> + >> + max98504: max98504@31 { >> + compatible = "maxim,max98504"; >> + reg = <0x31>; >> + maxim,rx-path = <1>; >> + maxim,tx-path = <1>; >> + maxim,tx-channel-mask = <3>; >> + maxim,tx-channel-source = <2>; >> + }; >> + }; >> + >> + sound { >> + compatible = "samsung,tm2-audio"; >> + audio-codec = <&wm5110>; >> + i2s-controller = <&i2s0>; >> + audio-amplifier = <&max98504>; >> + mic-bias-gpios = <&gpr3 2 0>; >> + model = "wm5110"; >> + samsung,audio-routing = >> + /* Headphone */ >> + "HP", "HPOUT1L", >> + "HP", "HPOUT1R", >> + >> + /* Speaker */ >> + "SPK", "SPKOUT", >> + "SPKOUT", "HPOUT2L", >> + "SPKOUT", "HPOUT2R", >> + >> + /* Receiver */ >> + "RCV", "HPOUT3L", >> + "RCV", "HPOUT3R"; >> + status = "okay"; >> + }; >> +}; >> + >> +&adc { >> + vdd-supply = <&ldo3_reg>; >> + status = "okay"; >> + >> + thermistor-ap { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 0>; >> + }; >> + >> + thermistor_battery: thermistor-battery { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 1>; >> + #thermal-sensor-cells = <0>; >> + }; >> + >> + thermistor-charger { >> + compatible = "ntc,ncp03wf104"; >> + pullup-uv = <1800000>; >> + pullup-ohm = <100000>; >> + pulldown-ohm = <0>; >> + io-channels = <&adc 2>; >> + }; >> +}; >> + >> +&cpu0 { >> + cpu-supply = <&buck3_reg>; >> +}; >> + >> +&cpu4 { >> + cpu-supply = <&buck2_reg>; >> +}; >> + >> +&decon { >> + status = "okay"; >> + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; >> + >> + i80-if-timings { >> + }; >> +}; >> + >> +&dsi { >> + status = "okay"; >> + vddcore-supply = <&ldo6_reg>; >> + vddio-supply = <&ldo7_reg>; >> + samsung,pll-clock-frequency = <24000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&te_irq>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@1 { >> + reg = <1>; >> + >> + dsi_out: endpoint { >> + samsung,burst-clock-frequency = <512000000>; >> + samsung,esc-clock-frequency = <16000000>; >> + }; >> + }; >> + }; >> +}; >> + >> +&hsi2c_0 { >> + status = "okay"; >> + clock-frequency = <2500000>; >> + >> + s2mps13_pmic@66 { > > Use '-' OK. > >> + compatible = "samsung,s2mps13-pmic"; >> + interrupt-parent = <&gpa0>; >> + interrupts = <7 0>; >> + reg = <0x66>; >> + wakeup; > > Use the common binding. I'll remove it. > >> + samsung,s2mps11-wrstbi-ground; >> + >> + s2mps13_osc: clocks { >> + compatible = "samsung,s2mps13-clk"; >> + #clock-cells = <1>; >> + clock-output-names = "s2mps13_ap", "s2mps13_cp", >> + "s2mps13_bt"; >> + }; >> + >> + regulators { >> + ldo1_reg: LDO1 { >> + regulator-name = "VDD_ALIVE_0.9V_AP"; >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <900000>; >> + regulator-always-on; >> + }; >> + >> + ldo2_reg: LDO2 { >> + regulator-name = "VDDQ_MMC2_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo3_reg: LDO3 { >> + regulator-name = "VDD1_E_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo4_reg: LDO4 { >> + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; >> + regulator-min-microvolt = <1300000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo5_reg: LDO5 { >> + regulator-name = "VDD10_DPLL_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo6_reg: LDO6 { >> + regulator-name = "VDD10_MIPI2L_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo7_reg: LDO7 { >> + regulator-name = "VDD18_MIPI2L_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo8_reg: LDO8 { >> + regulator-name = "VDD18_LLI_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo9_reg: LDO9 { >> + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo10_reg: LDO10 { >> + regulator-name = "VDD33_USB30_3.0V_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo11_reg: LDO11 { >> + regulator-name = "VDD_INT_M_1.0V_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo12_reg: LDO12 { >> + regulator-name = "VDD_KFC_M_1.1V_AP"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-always-on; >> + }; >> + >> + ldo13_reg: LDO13 { >> + regulator-name = "VDD_G3D_M_0.95V_AP"; >> + regulator-min-microvolt = <950000>; >> + regulator-max-microvolt = <950000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo14_reg: LDO14 { >> + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo15_reg: LDO15 { >> + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + ldo16_reg: LDO16 { >> + regulator-name = "VDDQ_EFUSE"; >> + regulator-min-microvolt = <1400000>; >> + regulator-max-microvolt = <3400000>; >> + regulator-always-on; >> + }; >> + >> + ldo17_reg: LDO17 { >> + regulator-name = "V_TFLASH_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo18_reg: LDO18 { >> + regulator-name = "V_CODEC_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo19_reg: LDO19 { >> + regulator-name = "VDDA_1.8V_COMP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo20_reg: LDO20 { >> + regulator-name = "VCC_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + regulator-always-on; >> + }; >> + >> + ldo21_reg: LDO21 { >> + regulator-name = "VT_CAM_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo22_reg: LDO22 { >> + regulator-name = "CAM_IO_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo23_reg: LDO23 { >> + regulator-name = "CAM_SEN_CORE_1.2V_AP"; >> + regulator-min-microvolt = <1050000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + ldo24_reg: LDO24 { >> + regulator-name = "VT_CAM_1.2V"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + }; >> + >> + ldo25_reg: LDO25 { >> + regulator-name = "CAM_SEN_A2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo26_reg: LDO26 { >> + regulator-name = "CAM_AF_2.8V_AP"; >> + regulator-min-microvolt = <2800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo27_reg: LDO27 { >> + regulator-name = "VCC_3.0V_LCD_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + }; >> + >> + ldo28_reg: LDO28 { >> + regulator-name = "VCC_1.8V_LCD_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo29_reg: LDO29 { >> + regulator-name = "VT_CAM_2.8V"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-always-on; >> + }; >> + >> + ldo30_reg: LDO30 { >> + regulator-name = "TSP_AVDD_3.3V_AP"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> + >> + ldo31_reg: LDO31 { >> + regulator-name = "TSP_VDD_1.85V_AP"; >> + regulator-min-microvolt = <1850000>; >> + regulator-max-microvolt = <1850000>; >> + regulator-boot-on; >> + }; >> + >> + ldo32_reg: LDO32 { >> + regulator-name = "VTOUCH_1.8V_AP"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-boot-on; >> + }; >> + >> + ldo33_reg: LDO33 { >> + regulator-name = "VTOUCH_LED_3.3V"; >> + regulator-min-microvolt = <2500000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-ramp-delay = <12500>; >> + }; >> + >> + ldo34_reg: LDO34 { >> + regulator-name = "VCC_1.8V_MHL_AP"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <2100000>; >> + }; >> + >> + ldo35_reg: LDO35 { >> + regulator-name = "OIS_VM_2.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <2800000>; >> + }; >> + >> + ldo36_reg: LDO36 { >> + regulator-name = "VSIL_1.0V"; >> + regulator-min-microvolt = <1000000>; >> + regulator-max-microvolt = <1000000>; >> + }; >> + >> + ldo37_reg: LDO37 { >> + regulator-name = "VF_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> + }; >> + >> + ldo38_reg: LDO38 { >> + regulator-name = "VCC_3.0V_MOTOR_AP"; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + }; >> + >> + ldo39_reg: LDO39 { >> + regulator-name = "V_HRM_1.8V"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + }; >> + >> + ldo40_reg: LDO40 { >> + regulator-name = "V_HRM_3.3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + }; >> + >> + buck1_reg: BUCK1 { >> + regulator-name = "VDD_MIF_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck2_reg: BUCK2 { >> + regulator-name = "VDD_EGL_1.0V_AP"; >> + regulator-min-microvolt = <900000>; >> + regulator-max-microvolt = <1300000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck3_reg: BUCK3 { >> + regulator-name = "VDD_KFC_1.0V_AP"; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck4_reg: BUCK4 { >> + regulator-name = "VDD_INT_0.95V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck5_reg: BUCK5 { >> + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck6_reg: BUCK6 { >> + regulator-name = "VDD_G3D_0.9V_AP"; >> + regulator-min-microvolt = <600000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + buck7_reg: BUCK7 { >> + regulator-name = "VDD_MEM1_1.2V_AP"; >> + regulator-min-microvolt = <1200000>; >> + regulator-max-microvolt = <1200000>; >> + regulator-always-on; >> + }; >> + >> + buck8_reg: BUCK8 { >> + regulator-name = "VDD_LLDO_1.35V_AP"; >> + regulator-min-microvolt = <1350000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + buck9_reg: BUCK9 { >> + regulator-name = "VDD_MLDO_2.0V_AP"; >> + regulator-min-microvolt = <1350000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + buck10_reg: BUCK10 { >> + regulator-name = "vdd_mem2"; >> + regulator-min-microvolt = <550000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-always-on; >> + }; >> + }; >> + }; >> +}; >> + >> +&hsi2c_8 { >> + status = "okay"; >> + >> + max77843@66 { >> + compatible = "samsung,max77843"; >> + interrupt-parent = <&gpa1>; >> + interrupts = <5 2>; >> + reg = <0x66>; >> + wakeup; > > Use common binding. I'll remove it. > >> + >> + muic: max77843-muic { >> + compatible = "maxim,max77843-muic"; >> + }; > > > Regards, Chanwoo Choi
On 08/16/2016 08:35 AM, Chanwoo Choi wrote: > &spi_1 { > + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + wm5110: wm5110-codec@0 { > + compatible = "wlf,wm5110"; > + reg = <0x0>; > + spi-max-frequency = <20000000>; > + interrupt-parent = <&gpa0>; > + interrupts = <4 0 0>; > + clocks = <&xxti>, <&s2mps13_osc 2>; The first clock needs to be CLKOUT, i.e. clocks = <&pmu_system_controller 0>, <&s2mps13_osc 2>;
2016-08-20 2:05 GMT+09:00 Sylwester Nawrocki <s.nawrocki@samsung.com>: > On 08/16/2016 08:35 AM, Chanwoo Choi wrote: >> &spi_1 { >> + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> + >> + wm5110: wm5110-codec@0 { >> + compatible = "wlf,wm5110"; >> + reg = <0x0>; >> + spi-max-frequency = <20000000>; >> + interrupt-parent = <&gpa0>; >> + interrupts = <4 0 0>; >> + clocks = <&xxti>, <&s2mps13_osc 2>; > > The first clock needs to be CLKOUT, i.e. > > clocks = <&pmu_system_controller 0>, <&s2mps13_osc 2>; > OK.
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 0ea7f14ef294..c704b4bf6137 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -15,6 +15,7 @@ Required root node properties: - "samsung,xyref5260" - for Exynos5260-based Samsung board. - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. - "samsung,sd5v1" - for Exynos5440-based Samsung board. - "samsung,ssdk5440" - for Exynos5440-based Samsung board. diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 50c9b9383cfa..7ddea53769a7 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -1,4 +1,7 @@ -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos5433-tm2.dtb \ + exynos5433-tm2e.dtb \ + exynos7-espresso.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts new file mode 100644 index 000000000000..3e497b0d0015 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -0,0 +1,1003 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; + + aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + i2c8 = &hsi2c_8; + i2c9 = &hsi2c_9; + i2c10 = &hsi2c_10; + i2c11 = &hsi2c_11; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + mshc2 = &mshc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + usbdrdphy0 = &usbdrd30_phy; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power_key { + gpios = <&gpa2 7 1>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + + volume_up_key { + gpios = <&gpa2 0 1>; + linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume_down_key { + gpios = <&gpa2 1 1>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage_key { + gpios = <&gpa0 3 1>; + linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 0>; + model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor_battery: thermistor-battery { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; + + i80-if-timings { + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13_pmic@66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 0>; + reg = <0x66>; + wakeup; + samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.2V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "CAM_SEN_A2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843@66 { + compatible = "samsung,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 2>; + reg = <0x66>; + wakeup; + + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&hsi2c_11 { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(IN, gpa0-0, DOWN, LV1); + PIN(IN, gpa0-1, NONE, LV1); + PIN(IN, gpa0-2, DOWN, LV1); + PIN(IN, gpa0-3, NONE, LV1); + PIN(IN, gpa0-4, NONE, LV1); + PIN(IN, gpa0-5, DOWN, LV1); + PIN(IN, gpa0-6, NONE, LV1); + PIN(IN, gpa0-7, NONE, LV1); + + PIN(IN, gpa1-0, UP, LV1); + PIN(IN, gpa1-1, NONE, LV1); + PIN(IN, gpa1-2, NONE, LV1); + PIN(IN, gpa1-3, DOWN, LV1); + PIN(IN, gpa1-4, DOWN, LV1); + PIN(IN, gpa1-5, NONE, LV1); + PIN(IN, gpa1-6, NONE, LV1); + PIN(IN, gpa1-7, NONE, LV1); + + PIN(IN, gpa2-0, NONE, LV1); + PIN(IN, gpa2-1, NONE, LV1); + PIN(IN, gpa2-2, NONE, LV1); + PIN(IN, gpa2-3, DOWN, LV1); + PIN(IN, gpa2-4, NONE, LV1); + PIN(IN, gpa2-5, DOWN, LV1); + PIN(IN, gpa2-6, DOWN, LV1); + PIN(IN, gpa2-7, NONE, LV1); + + PIN(IN, gpa3-0, DOWN, LV1); + PIN(IN, gpa3-1, DOWN, LV1); + PIN(IN, gpa3-2, NONE, LV1); + PIN(IN, gpa3-3, DOWN, LV1); + PIN(IN, gpa3-4, NONE, LV1); + PIN(IN, gpa3-5, DOWN, LV1); + PIN(IN, gpa3-6, DOWN, LV1); + PIN(IN, gpa3-7, DOWN, LV1); + + PIN(IN, gpf1-0, NONE, LV1); + PIN(IN, gpf1-1, NONE, LV1); + PIN(IN, gpf1-2, DOWN, LV1); + PIN(IN, gpf1-4, UP, LV1); + PIN(OUT, gpf1-5, NONE, LV1); + PIN(IN, gpf1-6, DOWN, LV1); + PIN(IN, gpf1-7, DOWN, LV1); + + PIN(IN, gpf2-0, DOWN, LV1); + PIN(IN, gpf2-1, DOWN, LV1); + PIN(IN, gpf2-2, DOWN, LV1); + PIN(IN, gpf2-3, DOWN, LV1); + + PIN(IN, gpf3-0, DOWN, LV1); + PIN(IN, gpf3-1, DOWN, LV1); + PIN(IN, gpf3-2, NONE, LV1); + PIN(IN, gpf3-3, DOWN, LV1); + + PIN(IN, gpf4-0, DOWN, LV1); + PIN(IN, gpf4-1, DOWN, LV1); + PIN(IN, gpf4-2, DOWN, LV1); + PIN(IN, gpf4-3, DOWN, LV1); + PIN(IN, gpf4-4, DOWN, LV1); + PIN(IN, gpf4-5, DOWN, LV1); + PIN(IN, gpf4-6, DOWN, LV1); + PIN(IN, gpf4-7, DOWN, LV1); + + PIN(IN, gpf5-0, DOWN, LV1); + PIN(IN, gpf5-1, DOWN, LV1); + PIN(IN, gpf5-2, DOWN, LV1); + PIN(IN, gpf5-3, DOWN, LV1); + PIN(OUT, gpf5-4, NONE, LV1); + PIN(IN, gpf5-5, DOWN, LV1); + PIN(IN, gpf5-6, DOWN, LV1); + PIN(IN, gpf5-7, DOWN, LV1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(IN, gpv6-0, DOWN, LV1); + PIN(IN, gpv6-1, DOWN, LV1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(IN, gpj2-0, DOWN, LV1); + PIN(IN, gpj2-1, DOWN, LV1); + PIN(IN, gpj2-2, DOWN, LV1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(IN, gpr3-0, NONE, LV1); + PIN(IN, gpr3-1, DOWN, LV1); + PIN(IN, gpr3-2, DOWN, LV1); + PIN(IN, gpr3-3, DOWN, LV1); + PIN(IN, gpr3-7, NONE, LV1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(IN, gpf0-0, UP, LV1); + PIN(IN, gpf0-1, UP, LV1); + PIN(IN, gpf0-2, DOWN, LV1); + PIN(IN, gpf0-3, UP, LV1); + PIN(IN, gpf0-4, DOWN, LV1); + PIN(IN, gpf0-5, NONE, LV1); + PIN(IN, gpf0-6, DOWN, LV1); + PIN(IN, gpf0-7, UP, LV1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(IN, gpj0-2, DOWN, LV1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(IN, gpv7-0, DOWN, LV1); + PIN(IN, gpv7-1, DOWN, LV1); + PIN(IN, gpv7-2, NONE, LV1); + PIN(IN, gpv7-3, DOWN, LV1); + PIN(IN, gpv7-4, DOWN, LV1); + PIN(IN, gpv7-5, DOWN, LV1); + + PIN(IN, gpb0-4, DOWN, LV1); + + PIN(IN, gpc0-2, DOWN, LV1); + PIN(IN, gpc0-5, DOWN, LV1); + PIN(IN, gpc0-7, DOWN, LV1); + + PIN(IN, gpc1-1, DOWN, LV1); + + PIN(IN, gpc3-4, NONE, LV1); + PIN(IN, gpc3-5, NONE, LV1); + PIN(IN, gpc3-6, NONE, LV1); + PIN(IN, gpc3-7, NONE, LV1); + + PIN(OUT, gpg0-0, NONE, LV1); + PIN(FUNC1, gpg0-1, DOWN, LV1); + + PIN(IN, gpd2-5, DOWN, LV1); + + PIN(IN, gpd4-0, NONE, LV1); + PIN(IN, gpd4-1, DOWN, LV1); + PIN(IN, gpd4-2, DOWN, LV1); + PIN(IN, gpd4-3, DOWN, LV1); + PIN(IN, gpd4-4, DOWN, LV1); + + PIN(IN, gpd6-3, DOWN, LV1); + + PIN(IN, gpd8-1, UP, LV1); + + PIN(IN, gpg1-0, DOWN, LV1); + PIN(IN, gpg1-1, DOWN, LV1); + PIN(IN, gpg1-2, DOWN, LV1); + PIN(IN, gpg1-3, DOWN, LV1); + PIN(IN, gpg1-4, DOWN, LV1); + + PIN(IN, gpg2-0, DOWN, LV1); + PIN(IN, gpg2-1, DOWN, LV1); + + PIN(IN, gpg3-0, DOWN, LV1); + PIN(IN, gpg3-1, DOWN, LV1); + PIN(IN, gpg3-5, DOWN, LV1); + PIN(IN, gpg3-7, DOWN, LV1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(IN, gpj1-2, DOWN, LV1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&serial_1 { + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 0 0>; + clocks = <&xxti>, <&s2mps13_osc 2>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x1>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + +&timer { + clock-frequency = <24000000>; +}; + +&tmu_atlas0 { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_apollo { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_g3d { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&usbdrd30 { + vdd33-supply = <&ldo10_reg>; + vdd10-supply = <&ldo6_reg>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd30_phy { + vbus-supply = <&safeout1_reg>; + status = "okay"; +}; + +&xxti { + clock-frequency = <24000000>; +};