| Message ID | 20160819014159.GA3337@oak.ozlabs.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 19/08/2016 03:41, Paul Mackerras wrote: > As discussed recently on the kvm mailing list, David Gibson's > intention in commit 178a78750212 ("vfio: Enable VFIO device for > powerpc", 2016-02-01) was to have the KVM VFIO device built in > on all powerpc platforms. This patch adds the "select KVM_VFIO" > statement that makes this happen. > > Currently, arch/powerpc/kvm/Makefile doesn't include vfio.o for > the 64-bit kvm module, because the list of objects doesn't use > the $(common-objs-y) list. The reason it doesn't is because we > don't necessarily want coalesced_mmio.o or emulate.o (for example > if HV KVM is the only target), and common-objs-y includes both. > > Since this is confusing, this patch adjusts the definitions so that > we now use $(common-objs-y) in the list for the 64-bit kvm.ko > module, emulate.o is removed from common-objs-y and added in the > places that need it, and the inclusion of coalesced_mmio.o now > depends on CONFIG_KVM_MMIO. > Signed-off-by: Paul Mackerras <paulus@ozlabs.org> > --- > arch/powerpc/kvm/Kconfig | 1 + > arch/powerpc/kvm/Makefile | 19 ++++++++----------- > 2 files changed, 9 insertions(+), 11 deletions(-) > > diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig > index c2024ac..c0a2478 100644 > --- a/arch/powerpc/kvm/Kconfig > +++ b/arch/powerpc/kvm/Kconfig > @@ -22,6 +22,7 @@ config KVM > select ANON_INODES > select HAVE_KVM_EVENTFD > select SRCU > + select KVM_VFIO > > config KVM_BOOK3S_HANDLER > bool > diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile > index 1f9e552..bd9b82f 100644 > --- a/arch/powerpc/kvm/Makefile > +++ b/arch/powerpc/kvm/Makefile > @@ -7,16 +7,16 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror > ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm > KVM := ../../../virt/kvm > > -common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \ > - $(KVM)/eventfd.o > +common-objs-y = $(KVM)/kvm_main.o $(KVM)/eventfd.o > common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o > +common-objs-$(CONFIG_KVM_MMIO) += $(KVM)/coalesced_mmio.o > > CFLAGS_e500_mmu.o := -I. > CFLAGS_e500_mmu_host.o := -I. > CFLAGS_emulate.o := -I. > CFLAGS_emulate_loadstore.o := -I. > > -common-objs-y += powerpc.o emulate.o emulate_loadstore.o > +common-objs-y += powerpc.o emulate_loadstore.o > obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o > obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o > > @@ -24,6 +24,7 @@ AFLAGS_booke_interrupts.o := -I$(objtree)/$(obj) > > kvm-e500-objs := \ > $(common-objs-y) \ > + emulate.o \ > booke.o \ > booke_emulate.o \ > booke_interrupts.o \ > @@ -35,6 +36,7 @@ kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs) > > kvm-e500mc-objs := \ > $(common-objs-y) \ > + emulate.o \ > booke.o \ > booke_emulate.o \ > bookehv_interrupts.o \ > @@ -61,9 +63,6 @@ kvm-pr-y := \ > book3s_32_mmu.o > > ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE > -kvm-book3s_64-module-objs := \ > - $(KVM)/coalesced_mmio.o > - > kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \ > book3s_rmhandlers.o > endif > @@ -88,11 +87,8 @@ endif > kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \ > book3s_xics.o > > -kvm-book3s_64-module-objs += \ > - $(KVM)/kvm_main.o \ > - $(KVM)/eventfd.o \ > - powerpc.o \ > - emulate_loadstore.o \ > +kvm-book3s_64-module-objs := \ > + $(common-objs-y) \ > book3s.o \ > book3s_64_vio.o \ > book3s_rtas.o \ > @@ -102,6 +98,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-module-objs) > > kvm-book3s_32-objs := \ > $(common-objs-y) \ > + emulate.o \ > fpu.o \ > book3s_paired_singles.o \ > book3s.o \ > Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 19, 2016 at 11:41:59AM +1000, Paul Mackerras wrote: > As discussed recently on the kvm mailing list, David Gibson's > intention in commit 178a78750212 ("vfio: Enable VFIO device for > powerpc", 2016-02-01) was to have the KVM VFIO device built in > on all powerpc platforms. This patch adds the "select KVM_VFIO" > statement that makes this happen. > > Currently, arch/powerpc/kvm/Makefile doesn't include vfio.o for > the 64-bit kvm module, because the list of objects doesn't use > the $(common-objs-y) list. The reason it doesn't is because we > don't necessarily want coalesced_mmio.o or emulate.o (for example > if HV KVM is the only target), and common-objs-y includes both. > > Since this is confusing, this patch adjusts the definitions so that > we now use $(common-objs-y) in the list for the 64-bit kvm.ko > module, emulate.o is removed from common-objs-y and added in the > places that need it, and the inclusion of coalesced_mmio.o now > depends on CONFIG_KVM_MMIO. > > Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> > --- > arch/powerpc/kvm/Kconfig | 1 + > arch/powerpc/kvm/Makefile | 19 ++++++++----------- > 2 files changed, 9 insertions(+), 11 deletions(-) > > diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig > index c2024ac..c0a2478 100644 > --- a/arch/powerpc/kvm/Kconfig > +++ b/arch/powerpc/kvm/Kconfig > @@ -22,6 +22,7 @@ config KVM > select ANON_INODES > select HAVE_KVM_EVENTFD > select SRCU > + select KVM_VFIO > > config KVM_BOOK3S_HANDLER > bool > diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile > index 1f9e552..bd9b82f 100644 > --- a/arch/powerpc/kvm/Makefile > +++ b/arch/powerpc/kvm/Makefile > @@ -7,16 +7,16 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror > ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm > KVM := ../../../virt/kvm > > -common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \ > - $(KVM)/eventfd.o > +common-objs-y = $(KVM)/kvm_main.o $(KVM)/eventfd.o > common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o > +common-objs-$(CONFIG_KVM_MMIO) += $(KVM)/coalesced_mmio.o > > CFLAGS_e500_mmu.o := -I. > CFLAGS_e500_mmu_host.o := -I. > CFLAGS_emulate.o := -I. > CFLAGS_emulate_loadstore.o := -I. > > -common-objs-y += powerpc.o emulate.o emulate_loadstore.o > +common-objs-y += powerpc.o emulate_loadstore.o > obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o > obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o > > @@ -24,6 +24,7 @@ AFLAGS_booke_interrupts.o := -I$(objtree)/$(obj) > > kvm-e500-objs := \ > $(common-objs-y) \ > + emulate.o \ > booke.o \ > booke_emulate.o \ > booke_interrupts.o \ > @@ -35,6 +36,7 @@ kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs) > > kvm-e500mc-objs := \ > $(common-objs-y) \ > + emulate.o \ > booke.o \ > booke_emulate.o \ > bookehv_interrupts.o \ > @@ -61,9 +63,6 @@ kvm-pr-y := \ > book3s_32_mmu.o > > ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE > -kvm-book3s_64-module-objs := \ > - $(KVM)/coalesced_mmio.o > - > kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \ > book3s_rmhandlers.o > endif > @@ -88,11 +87,8 @@ endif > kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \ > book3s_xics.o > > -kvm-book3s_64-module-objs += \ > - $(KVM)/kvm_main.o \ > - $(KVM)/eventfd.o \ > - powerpc.o \ > - emulate_loadstore.o \ > +kvm-book3s_64-module-objs := \ > + $(common-objs-y) \ > book3s.o \ > book3s_64_vio.o \ > book3s_rtas.o \ > @@ -102,6 +98,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-module-objs) > > kvm-book3s_32-objs := \ > $(common-objs-y) \ > + emulate.o \ > fpu.o \ > book3s_paired_singles.o \ > book3s.o \
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index c2024ac..c0a2478 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -22,6 +22,7 @@ config KVM select ANON_INODES select HAVE_KVM_EVENTFD select SRCU + select KVM_VFIO config KVM_BOOK3S_HANDLER bool diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index 1f9e552..bd9b82f 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -7,16 +7,16 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm KVM := ../../../virt/kvm -common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \ - $(KVM)/eventfd.o +common-objs-y = $(KVM)/kvm_main.o $(KVM)/eventfd.o common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o +common-objs-$(CONFIG_KVM_MMIO) += $(KVM)/coalesced_mmio.o CFLAGS_e500_mmu.o := -I. CFLAGS_e500_mmu_host.o := -I. CFLAGS_emulate.o := -I. CFLAGS_emulate_loadstore.o := -I. -common-objs-y += powerpc.o emulate.o emulate_loadstore.o +common-objs-y += powerpc.o emulate_loadstore.o obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o @@ -24,6 +24,7 @@ AFLAGS_booke_interrupts.o := -I$(objtree)/$(obj) kvm-e500-objs := \ $(common-objs-y) \ + emulate.o \ booke.o \ booke_emulate.o \ booke_interrupts.o \ @@ -35,6 +36,7 @@ kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs) kvm-e500mc-objs := \ $(common-objs-y) \ + emulate.o \ booke.o \ booke_emulate.o \ bookehv_interrupts.o \ @@ -61,9 +63,6 @@ kvm-pr-y := \ book3s_32_mmu.o ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE -kvm-book3s_64-module-objs := \ - $(KVM)/coalesced_mmio.o - kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \ book3s_rmhandlers.o endif @@ -88,11 +87,8 @@ endif kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \ book3s_xics.o -kvm-book3s_64-module-objs += \ - $(KVM)/kvm_main.o \ - $(KVM)/eventfd.o \ - powerpc.o \ - emulate_loadstore.o \ +kvm-book3s_64-module-objs := \ + $(common-objs-y) \ book3s.o \ book3s_64_vio.o \ book3s_rtas.o \ @@ -102,6 +98,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-module-objs) kvm-book3s_32-objs := \ $(common-objs-y) \ + emulate.o \ fpu.o \ book3s_paired_singles.o \ book3s.o \
As discussed recently on the kvm mailing list, David Gibson's intention in commit 178a78750212 ("vfio: Enable VFIO device for powerpc", 2016-02-01) was to have the KVM VFIO device built in on all powerpc platforms. This patch adds the "select KVM_VFIO" statement that makes this happen. Currently, arch/powerpc/kvm/Makefile doesn't include vfio.o for the 64-bit kvm module, because the list of objects doesn't use the $(common-objs-y) list. The reason it doesn't is because we don't necessarily want coalesced_mmio.o or emulate.o (for example if HV KVM is the only target), and common-objs-y includes both. Since this is confusing, this patch adjusts the definitions so that we now use $(common-objs-y) in the list for the 64-bit kvm.ko module, emulate.o is removed from common-objs-y and added in the places that need it, and the inclusion of coalesced_mmio.o now depends on CONFIG_KVM_MMIO. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> --- arch/powerpc/kvm/Kconfig | 1 + arch/powerpc/kvm/Makefile | 19 ++++++++----------- 2 files changed, 9 insertions(+), 11 deletions(-)