| Message ID | 1459525479-20842-4-git-send-email-wsa@the-dreams.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Wolfram, On Fri, Apr 1, 2016 at 5:44 PM, Wolfram Sang <wsa@the-dreams.de> wrote: > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > > Based on work by Shinobu Uehara and Ben Dooks. This adds the voltage > switch operation needed for all UHS-I modes, but not the tuning needed > for SDR-104 which will come later. > > Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> This patch causes a regression on r8a73a4/ape6evm, where the system feels sluggish, and the load average is always ca. 1. According to "top", "kworker/0:1" is consuming up to 80% of CPU time. "echo t > /proc/sysrq-trigger" tells me: kworker/0:1 R running 0 57 2 0x00000000 Workqueue: events_freezable mmc_rescan [<c0465e3c>] (__schedule) from [<c04662c4>] (preempt_schedule_common+0x1c/0x2c) [<c04662c4>] (preempt_schedule_common) from [<c0466430>] (_cond_resched+0x34/0x44) [<c0466430>] (_cond_resched) from [<c02f9d04>] (__mmc_start_request+0x6c/0x204) [<c02f9d04>] (__mmc_start_request) from [<c02f9fa0>] (mmc_start_request+0x104/0x118) [<c02f9fa0>] (mmc_start_request) from [<c02fa4b0>] (mmc_wait_for_req+0x3c/0x14c) [<c02fa4b0>] (mmc_wait_for_req) from [<c02fa624>] (mmc_wait_for_cmd+0x64/0x74) [<c02fa624>] (mmc_wait_for_cmd) from [<c03041dc>] (mmc_io_rw_direct_host+0xbc/0x124) [<c03041dc>] (mmc_io_rw_direct_host) from [<c0304608>] (sdio_reset+0x58/0x60) [<c0304608>] (sdio_reset) from [<c02fc4e8>] (mmc_rescan+0x244/0x338) [<c02fc4e8>] (mmc_rescan) from [<c00469a8>] (process_one_work+0x324/0x67c) [<c00469a8>] (process_one_work) from [<c0046fdc>] (worker_thread+0x2ac/0x3d4) [<c0046fdc>] (worker_thread) from [<c004caf4>] (kthread+0xd8/0xec) [<c004caf4>] (kthread) from [<c000fc10>] (ret_from_fork+0x14/0x24) I've bisected this to commit 452e5eef6d311e52f657b34d999758107ec3dd4a Author: Wolfram Sang <wsa+renesas@sang-engineering.com> Date: Fri Apr 1 17:44:33 2016 +0200 mmc: tmio: Add UHS-I mode support The problem goes away by: 1. Commenting-out the assignment to .card_busy 2. OR disabling the second SDHI channel, e.g. echo ee120000.sd > /sys/bus/platform/drivers/sh_mobile_sdhi/unbind The first SDHI channel (ee100000.sd) doesn't seem to be affected by the problem. I've added some debug code to dev_warn_ratelimited() the status value. This shows the SDHI channel keeps on reporting busy: # dmesg | grep -E "(tmio|sdhi)" | uniq -c 1 iommu: Adding device regulator-sdhi0 to group 0 1 iommu: Removing device regulator-sdhi0 from group 0 1 sh_mobile_sdhi ee100000.sd: could not find pctldev for node /pfc@e6050000/sd0, deferring probe 1 sh_mobile_sdhi ee120000.sd: could not find pctldev for node /pfc@e6050000/sd1, deferring probe 1 sh_mobile_sdhi ee100000.sd: adding to PM domain a3sp 1 _host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch 1 sh_mobile_sdhi ee100000.sd: mmc0 base at 0xee100000 max clock rate 88 MHz 1 sh_mobile_sdhi ee120000.sd: adding to PM domain a3sp 1 _host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch 1 sh_mobile_sdhi ee100000.sd: CTL_STATUS2 = 0x20800600 1 sh_mobile_sdhi ee100000.sd: CTL_STATUS2 = 0x20800400 1 sh_mobile_sdhi ee120000.sd: mmc1 base at 0xee120000 max clock rate 12 MHz 8 sh_mobile_sdhi ee120000.sd: CTL_STATUS2 = 0x20000600 1 tmio_mmc_card_busy: 3509 callbacks suppressed 10 sh_mobile_sdhi ee120000.sd: CTL_STATUS2 = 0x20000400 1 tmio_mmc_card_busy: 2653 callbacks suppressed 10 sh_mobile_sdhi ee120000.sd: CTL_STATUS2 = 0x20000400 1 tmio_mmc_card_busy: 2028 callbacks suppressed 10 sh_mobile_sdhi ee120000.sd: CTL_STATUS2 = 0x20000400 1 tmio_mmc_card_busy: 2888 callbacks suppressed 10 sh_mobile_sdhi ee120000.sd: CTL_STATUS2 = 0x20000400 Note that the reported values are the ones for a current tree. On commit 452e5eef6d311e52, the values are 0x31d2080, 0x3002080, 0x31d2000, and 0x3182000. As you can see ee100000.sd behaves normal. > --- > drivers/mmc/host/tmio_mmc.h | 2 ++ > drivers/mmc/host/tmio_mmc_pio.c | 12 +++++++++++- > include/linux/mmc/tmio.h | 2 ++ > 3 files changed, 15 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h > index b44b5890290622..b1819c74965b47 100644 > --- a/drivers/mmc/host/tmio_mmc.h > +++ b/drivers/mmc/host/tmio_mmc.h > @@ -101,6 +101,8 @@ struct tmio_mmc_host { > void (*clk_disable)(struct tmio_mmc_host *host); > int (*multi_io_quirk)(struct mmc_card *card, > unsigned int direction, int blk_size); > + int (*start_signal_voltage_switch)(struct mmc_host *mmc, > + struct mmc_ios *ios); > }; > > struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev); > diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c > index ae81b34f17a5a5..53e5ba5a21914c 100644 > --- a/drivers/mmc/host/tmio_mmc_pio.c > +++ b/drivers/mmc/host/tmio_mmc_pio.c > @@ -1012,12 +1012,20 @@ static int tmio_multi_io_quirk(struct mmc_card *card, > return blk_size; > } > > -static const struct mmc_host_ops tmio_mmc_ops = { > +static int tmio_mmc_card_busy(struct mmc_host *mmc) > +{ > + struct tmio_mmc_host *host = mmc_priv(mmc); > + > + return !(sd_ctrl_read32(host, CTL_STATUS2) & TMIO_STATUS2_DAT0); > +} > + > +static struct mmc_host_ops tmio_mmc_ops = { > .request = tmio_mmc_request, > .set_ios = tmio_mmc_set_ios, > .get_ro = tmio_mmc_get_ro, > .get_cd = mmc_gpio_get_cd, > .enable_sdio_irq = tmio_mmc_enable_sdio_irq, > + .card_busy = tmio_mmc_card_busy, > .multi_io_quirk = tmio_multi_io_quirk, > }; > > @@ -1116,7 +1124,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, > goto host_free; > } > > + tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch; > mmc->ops = &tmio_mmc_ops; > + > mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; > mmc->caps2 |= pdata->capabilities2; > mmc->max_segs = 32; > diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h > index 5f5cd80e976500..b2f28e99503383 100644 > --- a/include/linux/mmc/tmio.h > +++ b/include/linux/mmc/tmio.h > @@ -63,6 +63,8 @@ > #define TMIO_STAT_CMD_BUSY 0x40000000 > #define TMIO_STAT_ILL_ACCESS 0x80000000 > > +#define TMIO_STATUS2_DAT0 BIT(7) > + > #define CLK_CTL_DIV_MASK 0xff > #define CLK_CTL_SCLKEN BIT(8) Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> The first SDHI channel (ee100000.sd) doesn't seem to be affected > by the problem. Hmm, I sadly don't have any docs about 73a4 and/or its SDHI variants. I'll ask around.
Hi Wolfram, On Tue, Aug 16, 2016 at 9:55 PM, Wolfram Sang <wsa@the-dreams.de> wrote: >> The first SDHI channel (ee100000.sd) doesn't seem to be affected >> by the problem. > > Hmm, I sadly don't have any docs about 73a4 and/or its SDHI variants. > I'll ask around. Forgot to add: I don't see the issue on sh73a0/kzm9g nor r8a7740/armadillo. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> [<c02f9d04>] (__mmc_start_request) from [<c02f9fa0>] > (mmc_start_request+0x104/0x118) This function calls card_busy only for SDIO cards. I assume you don't have one inserted? Maybe the "broken-cd" property doesn't work correctly and causes side-effects? This would explain why it only affects SDHI1 and not SDHI0.
Hi Wolfram, On Wed, Aug 17, 2016 at 9:08 PM, Wolfram Sang <wsa@the-dreams.de> wrote: >> [<c02f9d04>] (__mmc_start_request) from [<c02f9fa0>] >> (mmc_start_request+0x104/0x118) > > This function calls card_busy only for SDIO cards. I assume you don't > have one inserted? Maybe the "broken-cd" property doesn't work correctly No, nothing is inserted. > and causes side-effects? This would explain why it only affects SDHI1 > and not SDHI0. I'll try to remove it. Note that sh73a0-kzm9g.dts also uses broken-cd, without ill effects. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> I'll try to remove it. Note that sh73a0-kzm9g.dts also uses broken-cd, > without ill effects. This one does have a seperate card-detect-irq (which is not populated for sdhi2) while the other one only has one, generic irq. That's at least a difference. We could try to see if there are unexpected card-detect events by instrumenting mmc_detect_change() in tmio_mmc_pio.c, but my feeling is that the card_busy change you reverted is only making something visible which went wrong before the change, also. So, it might be worth to protect the whole voltage_switch and card_busy functionality with TMIO_MMC_MIN_RCAR2?
Hi Wolfram, On Wed, Aug 17, 2016 at 9:08 PM, Wolfram Sang <wsa@the-dreams.de> wrote: >> [<c02f9d04>] (__mmc_start_request) from [<c02f9fa0>] >> (mmc_start_request+0x104/0x118) > > This function calls card_busy only for SDIO cards. I assume you don't > have one inserted? Maybe the "broken-cd" property doesn't work correctly > and causes side-effects? This would explain why it only affects SDHI1 > and not SDHI0. Removing the "broken-cd" property fixes the issue. However, I'm not in a position to verify SDHI1 works after that. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index b44b5890290622..b1819c74965b47 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -101,6 +101,8 @@ struct tmio_mmc_host { void (*clk_disable)(struct tmio_mmc_host *host); int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); + int (*start_signal_voltage_switch)(struct mmc_host *mmc, + struct mmc_ios *ios); }; struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ae81b34f17a5a5..53e5ba5a21914c 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -1012,12 +1012,20 @@ static int tmio_multi_io_quirk(struct mmc_card *card, return blk_size; } -static const struct mmc_host_ops tmio_mmc_ops = { +static int tmio_mmc_card_busy(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + return !(sd_ctrl_read32(host, CTL_STATUS2) & TMIO_STATUS2_DAT0); +} + +static struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = tmio_mmc_enable_sdio_irq, + .card_busy = tmio_mmc_card_busy, .multi_io_quirk = tmio_multi_io_quirk, }; @@ -1116,7 +1124,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, goto host_free; } + tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch; mmc->ops = &tmio_mmc_ops; + mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = 32; diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h index 5f5cd80e976500..b2f28e99503383 100644 --- a/include/linux/mmc/tmio.h +++ b/include/linux/mmc/tmio.h @@ -63,6 +63,8 @@ #define TMIO_STAT_CMD_BUSY 0x40000000 #define TMIO_STAT_ILL_ACCESS 0x80000000 +#define TMIO_STATUS2_DAT0 BIT(7) + #define CLK_CTL_DIV_MASK 0xff #define CLK_CTL_SCLKEN BIT(8)