| Message ID | 1466691210-22779-23-git-send-email-architt@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Rob, On 06/23/2016 07:43 PM, Archit Taneja wrote: > Remove the DSI index properties from the DSI host and PHY binding > documentation. The indices aren't a valid property and shouldn't > be a part of the DT binding. > Can I get an Ack on this? Thanks, Archit > Signed-off-by: Archit Taneja <architt@codeaurora.org> > --- > Documentation/devicetree/bindings/display/msm/dsi.txt | 6 ------ > 1 file changed, 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt > index 6b1cab1..e6933a8 100644 > --- a/Documentation/devicetree/bindings/display/msm/dsi.txt > +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt > @@ -7,8 +7,6 @@ Required properties: > - reg: Physical base address and length of the registers of controller > - reg-names: The names of register regions. The following regions are required: > * "dsi_ctrl" > -- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should > - be 0 or 1, since we have 2 DSI controllers at most for now. > - interrupts: The interrupt signal from the DSI block. > - power-domains: Should be <&mmcc MDSS_GDSC>. > - clocks: Phandles to device clocks. > @@ -96,8 +94,6 @@ Required properties: > * "dsi_phy_regulator" > - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating > 2 clocks: A byte clock (index 0), and a pixel clock (index 1). > -- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should > - be 0 or 1, since we have 2 DSI PHYs at most for now. > - power-domains: Should be <&mmcc MDSS_GDSC>. > - clocks: Phandles to device clocks. See [1] for details on clock bindings. > - clock-names: the following clocks are required: > @@ -116,7 +112,6 @@ Optional properties: > Example: > dsi0: dsi@fd922800 { > compatible = "qcom,mdss-dsi-ctrl"; > - qcom,dsi-host-index = <0>; > interrupt-parent = <&mdp>; > interrupts = <4 0>; > reg-names = "dsi_ctrl"; > @@ -199,7 +194,6 @@ Example: > > dsi_phy0: dsi-phy@fd922a00 { > compatible = "qcom,dsi-phy-28nm-hpm"; > - qcom,dsi-phy-index = <0>; > reg-names = > "dsi_pll", > "dsi_phy", >
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index 6b1cab1..e6933a8 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -7,8 +7,6 @@ Required properties: - reg: Physical base address and length of the registers of controller - reg-names: The names of register regions. The following regions are required: * "dsi_ctrl" -- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should - be 0 or 1, since we have 2 DSI controllers at most for now. - interrupts: The interrupt signal from the DSI block. - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. @@ -96,8 +94,6 @@ Required properties: * "dsi_phy_regulator" - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating 2 clocks: A byte clock (index 0), and a pixel clock (index 1). -- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should - be 0 or 1, since we have 2 DSI PHYs at most for now. - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: @@ -116,7 +112,6 @@ Optional properties: Example: dsi0: dsi@fd922800 { compatible = "qcom,mdss-dsi-ctrl"; - qcom,dsi-host-index = <0>; interrupt-parent = <&mdp>; interrupts = <4 0>; reg-names = "dsi_ctrl"; @@ -199,7 +194,6 @@ Example: dsi_phy0: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; - qcom,dsi-phy-index = <0>; reg-names = "dsi_pll", "dsi_phy",
Remove the DSI index properties from the DSI host and PHY binding documentation. The indices aren't a valid property and shouldn't be a part of the DT binding. Signed-off-by: Archit Taneja <architt@codeaurora.org> --- Documentation/devicetree/bindings/display/msm/dsi.txt | 6 ------ 1 file changed, 6 deletions(-)