Message ID | 1472633892-8261-2-git-send-email-j-keerthy@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, 31 Aug 2016, Keerthy wrote: > The LP873X chip is a power management IC for Portable Navigation Systems > and Tablet Computing devices. It contains the following components: > > - Regulators. > - Configurable General Purpose Output Signals (GPO). > > PMIC interacts with the main processor through i2c. PMIC has > couple of LDOs (Linear Regulators), couple of BUCKs (Step-Down DC-DC > Converter Cores) and GPOs (General Purpose Output Signals). > > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > drivers/mfd/Kconfig | 14 +++ > drivers/mfd/Makefile | 2 + > drivers/mfd/lp873x.c | 99 +++++++++++++++++ > include/linux/mfd/lp873x.h | 269 +++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 384 insertions(+) > create mode 100644 drivers/mfd/lp873x.c > create mode 100644 include/linux/mfd/lp873x.h For my own reference: Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 2d1fb64..69e51d0 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1224,6 +1224,20 @@ config MFD_TPS65217 > This driver can also be built as a module. If so, the module > will be called tps65217. > > +config MFD_TI_LP873X > + tristate "TI LP873X Power Management IC" > + depends on I2C > + select MFD_CORE > + select REGMAP_I2C > + help > + If you say yes here then you get support for the LP873X series of > + Power Management Integrated Circuits (PMIC). > + These include voltage regulators, thermal protection, configurable > + General Purpose Outputs (GPO) that are used in portable devices. > + > + This driver can also be built as a module. If so, the module > + will be called lp873x. > + > config MFD_TPS65218 > tristate "TI TPS65218 Power Management chips" > depends on I2C > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 2ba3ba3..42acbcd 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o > obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o > obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o > > +obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o > + > obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o > obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o > obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o > diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c > new file mode 100644 > index 0000000..4ab2401 > --- /dev/null > +++ b/drivers/mfd/lp873x.c > @@ -0,0 +1,99 @@ > +/* > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * Author: Keerthy <j-keerthy@ti.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/mfd/core.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > + > +#include <linux/mfd/lp873x.h> > + > +static const struct regmap_config lp873x_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = LP873X_REG_MAX, > +}; > + > +static const struct mfd_cell lp873x_cells[] = { > + { .name = "lp873x-regulator", }, > + { .name = "lp873x-gpio", }, > +}; > + > +static int lp873x_probe(struct i2c_client *client, > + const struct i2c_device_id *ids) > +{ > + struct lp873x *lp873; > + int ret; > + unsigned int otpid; > + > + lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL); > + if (!lp873) > + return -ENOMEM; > + > + lp873->dev = &client->dev; > + > + lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config); > + if (IS_ERR(lp873->regmap)) { > + ret = PTR_ERR(lp873->regmap); > + dev_err(lp873->dev, > + "Failed to initialize register map: %d\n", ret); > + return ret; > + } > + > + mutex_init(&lp873->lock); > + > + ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid); > + if (ret) { > + dev_err(lp873->dev, "Failed to read OTP ID\n"); > + return ret; > + } > + > + lp873->rev = otpid & LP873X_OTP_REV_OTP_ID; > + > + i2c_set_clientdata(client, lp873); > + > + ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells, > + ARRAY_SIZE(lp873x_cells), NULL, 0, NULL); > + > + return ret; > +} > + > +static const struct of_device_id of_lp873x_match_table[] = { > + { .compatible = "ti,lp8733", }, > + { .compatible = "ti,lp8732", }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, of_lp873x_match_table); > + > +static const struct i2c_device_id lp873x_id_table[] = { > + { "lp873x", 0 }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, lp873x_id_table); > + > +static struct i2c_driver lp873x_driver = { > + .driver = { > + .name = "lp873x", > + .of_match_table = of_lp873x_match_table, > + }, > + .probe = lp873x_probe, > + .id_table = lp873x_id_table, > +}; > +module_i2c_driver(lp873x_driver); > + > +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); > +MODULE_DESCRIPTION("LP873X chip family Multi-Function Device driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h > new file mode 100644 > index 0000000..fc46f8a > --- /dev/null > +++ b/include/linux/mfd/lp873x.h > @@ -0,0 +1,269 @@ > +/* > + * Functions to access LP873X power management chip. > + * > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#ifndef __LINUX_MFD_LP873X_H > +#define __LINUX_MFD_LP873X_H > + > +#include <linux/i2c.h> > +#include <linux/regulator/driver.h> > +#include <linux/regulator/machine.h> > + > +/* LP873x chip id list */ > +#define LP873X 0x00 > + > +/* All register addresses */ > +#define LP873X_REG_DEV_REV 0X00 > +#define LP873X_REG_OTP_REV 0X01 > +#define LP873X_REG_BUCK0_CTRL_1 0X02 > +#define LP873X_REG_BUCK0_CTRL_2 0X03 > +#define LP873X_REG_BUCK1_CTRL_1 0X04 > +#define LP873X_REG_BUCK1_CTRL_2 0X05 > +#define LP873X_REG_BUCK0_VOUT 0X06 > +#define LP873X_REG_BUCK1_VOUT 0X07 > +#define LP873X_REG_LDO0_CTRL 0X08 > +#define LP873X_REG_LDO1_CTRL 0X09 > +#define LP873X_REG_LDO0_VOUT 0X0A > +#define LP873X_REG_LDO1_VOUT 0X0B > +#define LP873X_REG_BUCK0_DELAY 0X0C > +#define LP873X_REG_BUCK1_DELAY 0X0D > +#define LP873X_REG_LDO0_DELAY 0X0E > +#define LP873X_REG_LDO1_DELAY 0X0F > +#define LP873X_REG_GPO_DELAY 0X10 > +#define LP873X_REG_GPO2_DELAY 0X11 > +#define LP873X_REG_GPO_CTRL 0X12 > +#define LP873X_REG_CONFIG 0X13 > +#define LP873X_REG_PLL_CTRL 0X14 > +#define LP873X_REG_PGOOD_CTRL1 0X15 > +#define LP873X_REG_PGOOD_CTRL2 0X16 > +#define LP873X_REG_PG_FAULT 0X17 > +#define LP873X_REG_RESET 0X18 > +#define LP873X_REG_INT_TOP_1 0X19 > +#define LP873X_REG_INT_TOP_2 0X1A > +#define LP873X_REG_INT_BUCK 0X1B > +#define LP873X_REG_INT_LDO 0X1C > +#define LP873X_REG_TOP_STAT 0X1D > +#define LP873X_REG_BUCK_STAT 0X1E > +#define LP873X_REG_LDO_STAT 0x1F > +#define LP873X_REG_TOP_MASK_1 0x20 > +#define LP873X_REG_TOP_MASK_2 0x21 > +#define LP873X_REG_BUCK_MASK 0x22 > +#define LP873X_REG_LDO_MASK 0x23 > +#define LP873X_REG_SEL_I_LOAD 0x24 > +#define LP873X_REG_I_LOAD_2 0x25 > +#define LP873X_REG_I_LOAD_1 0x26 > + > +#define LP873X_REG_MAX LP873X_REG_I_LOAD_1 > + > +/* Register field definitions */ > +#define LP873X_DEV_REV_DEV_ID 0xC0 > +#define LP873X_DEV_REV_ALL_LAYER 0x30 > +#define LP873X_DEV_REV_METAL_LAYER 0x0F > + > +#define LP873X_OTP_REV_OTP_ID 0xFF > + > +#define LP873X_BUCK0_CTRL_1_BUCK0_FPWM BIT(3) > +#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2) > +#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1) > +#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0) > + > +#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38 > +#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07 > + > +#define LP873X_BUCK1_CTRL_1_BUCK1_FPWM BIT(3) > +#define LP873X_BUCK1_CTRL_1_BUCK1_RDIS_EN BIT(2) > +#define LP873X_BUCK1_CTRL_1_BUCK1_EN_PIN_CTRL BIT(1) > +#define LP873X_BUCK1_CTRL_1_BUCK1_EN BIT(0) > + > +#define LP873X_BUCK1_CTRL_2_BUCK1_ILIM 0x38 > +#define LP873X_BUCK1_CTRL_2_BUCK1_SLEW_RATE 0x07 > + > +#define LP873X_BUCK0_VOUT_BUCK0_VSET 0xFF > + > +#define LP873X_BUCK1_VOUT_BUCK1_VSET 0xFF > + > +#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2) > +#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1) > +#define LP873X_LDO0_CTRL_LDO0_EN BIT(0) > + > +#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2) > +#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1) > +#define LP873X_LDO1_CTRL_LDO1_EN BIT(0) > + > +#define LP873X_LDO0_VOUT_LDO0_VSET 0x1F > + > +#define LP873X_LDO1_VOUT_LDO1_VSET 0x1F > + > +#define LP873X_BUCK0_DELAY_BUCK0_SD_DELAY 0xF0 > +#define LP873X_BUCK0_DELAY_BUCK0_SU_DELAY 0x0F > + > +#define LP873X_BUCK1_DELAY_BUCK1_SD_DELAY 0xF0 > +#define LP873X_BUCK1_DELAY_BUCK1_SU_DELAY 0x0F > + > +#define LP873X_LDO0_DELAY_LDO0_SD_DELAY 0xF0 > +#define LP873X_LDO0_DELAY_LDO0_SU_DELAY 0x0F > + > +#define LP873X_LDO1_DELAY_LDO1_SD_DELAY 0xF0 > +#define LP873X_LDO1_DELAY_LDO1_SU_DELAY 0x0F > + > +#define LP873X_GPO_DELAY_GPO_SD_DELAY 0xF0 > +#define LP873X_GPO_DELAY_GPO_SU_DELAY 0x0F > + > +#define LP873X_GPO2_DELAY_GPO2_SD_DELAY 0xF0 > +#define LP873X_GPO2_DELAY_GPO2_SU_DELAY 0x0F > + > +#define LP873X_GPO_CTRL_GPO2_OD BIT(6) > +#define LP873X_GPO_CTRL_GPO2_EN_PIN_CTRL BIT(5) > +#define LP873X_GPO_CTRL_GPO2_EN BIT(4) > +#define LP873X_GPO_CTRL_GPO_OD BIT(2) > +#define LP873X_GPO_CTRL_GPO_EN_PIN_CTRL BIT(1) > +#define LP873X_GPO_CTRL_GPO_EN BIT(0) > + > +#define LP873X_CONFIG_SU_DELAY_SEL BIT(6) > +#define LP873X_CONFIG_SD_DELAY_SEL BIT(5) > +#define LP873X_CONFIG_CLKIN_PIN_SEL BIT(4) > +#define LP873X_CONFIG_CLKIN_PD BIT(3) > +#define LP873X_CONFIG_EN_PD BIT(2) > +#define LP873X_CONFIG_TDIE_WARN_LEVEL BIT(1) > +#define LP873X_EN_SPREAD_SPEC BIT(0) > + > +#define LP873X_PLL_CTRL_EN_PLL BIT(6) > +#define LP873X_EXT_CLK_FREQ 0x1F > + > +#define LP873X_PGOOD_CTRL1_PGOOD_POL BIT(7) > +#define LP873X_PGOOD_CTRL1_PGOOD_OD BIT(6) > +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOW_LDO BIT(5) > +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOWN_BUCK BIT(4) > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO1 BIT(3) > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO0 BIT(2) > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK1 BIT(1) > +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK0 BIT(0) > + > +#define LP873X_PGOOD_CTRL2_EN_PGOOD_TWARN BIT(2) > +#define LP873X_PGOOD_CTRL2_EN_PG_FAULT_GATE BIT(1) > +#define LP873X_PGOOD_CTRL2_PGOOD_MODE BIT(0) > + > +#define LP873X_PG_FAULT_PG_FAULT_LDO1 BIT(3) > +#define LP873X_PG_FAULT_PG_FAULT_LDO0 BIT(2) > +#define LP873X_PG_FAULT_PG_FAULT_BUCK1 BIT(1) > +#define LP873X_PG_FAULT_PG_FAULT_BUCK0 BIT(0) > + > +#define LP873X_RESET_SW_RESET BIT(0) > + > +#define LP873X_INT_TOP_1_PGOOD_INT BIT(7) > +#define LP873X_INT_TOP_1_LDO_INT BIT(6) > +#define LP873X_INT_TOP_1_BUCK_INT BIT(5) > +#define LP873X_INT_TOP_1_SYNC_CLK_INT BIT(4) > +#define LP873X_INT_TOP_1_TDIE_SD_INT BIT(3) > +#define LP873X_INT_TOP_1_TDIE_WARN_INT BIT(2) > +#define LP873X_INT_TOP_1_OVP_INT BIT(1) > +#define LP873X_INT_TOP_1_I_MEAS_INT BIT(0) > + > +#define LP873X_INT_TOP_2_RESET_REG_INT BIT(0) > + > +#define LP873X_INT_BUCK_BUCK1_PG_INT BIT(6) > +#define LP873X_INT_BUCK_BUCK1_SC_INT BIT(5) > +#define LP873X_INT_BUCK_BUCK1_ILIM_INT BIT(4) > +#define LP873X_INT_BUCK_BUCK0_PG_INT BIT(2) > +#define LP873X_INT_BUCK_BUCK0_SC_INT BIT(1) > +#define LP873X_INT_BUCK_BUCK0_ILIM_INT BIT(0) > + > +#define LP873X_INT_LDO_LDO1_PG_INT BIT(6) > +#define LP873X_INT_LDO_LDO1_SC_INT BIT(5) > +#define LP873X_INT_LDO_LDO1_ILIM_INT BIT(4) > +#define LP873X_INT_LDO_LDO0_PG_INT BIT(2) > +#define LP873X_INT_LDO_LDO0_SC_INT BIT(1) > +#define LP873X_INT_LDO_LDO0_ILIM_INT BIT(0) > + > +#define LP873X_TOP_STAT_PGOOD_STAT BIT(7) > +#define LP873X_TOP_STAT_SYNC_CLK_STAT BIT(4) > +#define LP873X_TOP_STAT_TDIE_SD_STAT BIT(3) > +#define LP873X_TOP_STAT_TDIE_WARN_STAT BIT(2) > +#define LP873X_TOP_STAT_OVP_STAT BIT(1) > + > +#define LP873X_BUCK_STAT_BUCK1_STAT BIT(7) > +#define LP873X_BUCK_STAT_BUCK1_PG_STAT BIT(6) > +#define LP873X_BUCK_STAT_BUCK1_ILIM_STAT BIT(4) > +#define LP873X_BUCK_STAT_BUCK0_STAT BIT(3) > +#define LP873X_BUCK_STAT_BUCK0_PG_STAT BIT(2) > +#define LP873X_BUCK_STAT_BUCK0_ILIM_STAT BIT(0) > + > +#define LP873X_LDO_STAT_LDO1_STAT BIT(7) > +#define LP873X_LDO_STAT_LDO1_PG_STAT BIT(6) > +#define LP873X_LDO_STAT_LDO1_ILIM_STAT BIT(4) > +#define LP873X_LDO_STAT_LDO0_STAT BIT(3) > +#define LP873X_LDO_STAT_LDO0_PG_STAT BIT(2) > +#define LP873X_LDO_STAT_LDO0_ILIM_STAT BIT(0) > + > +#define LP873X_TOP_MASK_1_PGOOD_INT_MASK BIT(7) > +#define LP873X_TOP_MASK_1_SYNC_CLK_MASK BIT(4) > +#define LP873X_TOP_MASK_1_TDIE_WARN_MASK BIT(2) > +#define LP873X_TOP_MASK_1_I_MEAS_MASK BIT(0) > + > +#define LP873X_TOP_MASK_2_RESET_REG_MASK BIT(0) > + > +#define LP873X_BUCK_MASK_BUCK1_PGF_MASK BIT(7) > +#define LP873X_BUCK_MASK_BUCK1_PGR_MASK BIT(6) > +#define LP873X_BUCK_MASK_BUCK1_ILIM_MASK BIT(4) > +#define LP873X_BUCK_MASK_BUCK0_PGF_MASK BIT(3) > +#define LP873X_BUCK_MASK_BUCK0_PGR_MASK BIT(2) > +#define LP873X_BUCK_MASK_BUCK0_ILIM_MASK BIT(0) > + > +#define LP873X_LDO_MASK_LDO1_PGF_MASK BIT(7) > +#define LP873X_LDO_MASK_LDO1_PGR_MASK BIT(6) > +#define LP873X_LDO_MASK_LDO1_ILIM_MASK BIT(4) > +#define LP873X_LDO_MASK_LDO0_PGF_MASK BIT(3) > +#define LP873X_LDO_MASK_LDO0_PGR_MASK BIT(2) > +#define LP873X_LDO_MASK_LDO0_ILIM_MASK BIT(0) > + > +#define LP873X_SEL_I_LOAD_CURRENT_BUCK_SELECT BIT(0) > + > +#define LP873X_I_LOAD_2_BUCK_LOAD_CURRENT BIT(0) > + > +#define LP873X_I_LOAD_1_BUCK_LOAD_CURRENT 0xFF > + > +#define LP873X_MAX_REG_ID LP873X_LDO_1 > + > +/* Number of step-down converters available */ > +#define LP873X_NUM_BUCK 2 > +/* Number of LDO voltage regulators available */ > +#define LP873X_NUM_LDO 2 > +/* Number of total regulators available */ > +#define LP873X_NUM_REGULATOR (LP873X_NUM_BUCK + LP873X_NUM_LDO) > + > +enum lp873x_regulator_id { > + /* BUCK's */ > + LP873X_BUCK_0, > + LP873X_BUCK_1, > + /* LDOs */ > + LP873X_LDO_0, > + LP873X_LDO_1, > +}; > + > +/** > + * struct lp873x - state holder for the lp873x driver > + * @dev: struct device pointer for MFD device > + * @rev: revision of the lp873x > + * @lock: lock guarding the data structure > + * @regmap: register map of the lp873x PMIC > + * > + * Device data may be used to access the LP873X chip > + */ > +struct lp873x { > + struct device *dev; > + u8 rev; > + struct mutex lock; /* lock guarding the data structure */ > + struct regmap *regmap; > +}; > +#endif /* __LINUX_MFD_LP873X_H */
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2d1fb64..69e51d0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1224,6 +1224,20 @@ config MFD_TPS65217 This driver can also be built as a module. If so, the module will be called tps65217. +config MFD_TI_LP873X + tristate "TI LP873X Power Management IC" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here then you get support for the LP873X series of + Power Management Integrated Circuits (PMIC). + These include voltage regulators, thermal protection, configurable + General Purpose Outputs (GPO) that are used in portable devices. + + This driver can also be built as a module. If so, the module + will be called lp873x. + config MFD_TPS65218 tristate "TI TPS65218 Power Management chips" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 2ba3ba3..42acbcd 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o +obj-$(CONFIG_MFD_TI_LP873X) += lp873x.o + obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c new file mode 100644 index 0000000..4ab2401 --- /dev/null +++ b/drivers/mfd/lp873x.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: Keerthy <j-keerthy@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +#include <linux/mfd/lp873x.h> + +static const struct regmap_config lp873x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LP873X_REG_MAX, +}; + +static const struct mfd_cell lp873x_cells[] = { + { .name = "lp873x-regulator", }, + { .name = "lp873x-gpio", }, +}; + +static int lp873x_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct lp873x *lp873; + int ret; + unsigned int otpid; + + lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL); + if (!lp873) + return -ENOMEM; + + lp873->dev = &client->dev; + + lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config); + if (IS_ERR(lp873->regmap)) { + ret = PTR_ERR(lp873->regmap); + dev_err(lp873->dev, + "Failed to initialize register map: %d\n", ret); + return ret; + } + + mutex_init(&lp873->lock); + + ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid); + if (ret) { + dev_err(lp873->dev, "Failed to read OTP ID\n"); + return ret; + } + + lp873->rev = otpid & LP873X_OTP_REV_OTP_ID; + + i2c_set_clientdata(client, lp873); + + ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells, + ARRAY_SIZE(lp873x_cells), NULL, 0, NULL); + + return ret; +} + +static const struct of_device_id of_lp873x_match_table[] = { + { .compatible = "ti,lp8733", }, + { .compatible = "ti,lp8732", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_lp873x_match_table); + +static const struct i2c_device_id lp873x_id_table[] = { + { "lp873x", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, lp873x_id_table); + +static struct i2c_driver lp873x_driver = { + .driver = { + .name = "lp873x", + .of_match_table = of_lp873x_match_table, + }, + .probe = lp873x_probe, + .id_table = lp873x_id_table, +}; +module_i2c_driver(lp873x_driver); + +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); +MODULE_DESCRIPTION("LP873X chip family Multi-Function Device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h new file mode 100644 index 0000000..fc46f8a --- /dev/null +++ b/include/linux/mfd/lp873x.h @@ -0,0 +1,269 @@ +/* + * Functions to access LP873X power management chip. + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_LP873X_H +#define __LINUX_MFD_LP873X_H + +#include <linux/i2c.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* LP873x chip id list */ +#define LP873X 0x00 + +/* All register addresses */ +#define LP873X_REG_DEV_REV 0X00 +#define LP873X_REG_OTP_REV 0X01 +#define LP873X_REG_BUCK0_CTRL_1 0X02 +#define LP873X_REG_BUCK0_CTRL_2 0X03 +#define LP873X_REG_BUCK1_CTRL_1 0X04 +#define LP873X_REG_BUCK1_CTRL_2 0X05 +#define LP873X_REG_BUCK0_VOUT 0X06 +#define LP873X_REG_BUCK1_VOUT 0X07 +#define LP873X_REG_LDO0_CTRL 0X08 +#define LP873X_REG_LDO1_CTRL 0X09 +#define LP873X_REG_LDO0_VOUT 0X0A +#define LP873X_REG_LDO1_VOUT 0X0B +#define LP873X_REG_BUCK0_DELAY 0X0C +#define LP873X_REG_BUCK1_DELAY 0X0D +#define LP873X_REG_LDO0_DELAY 0X0E +#define LP873X_REG_LDO1_DELAY 0X0F +#define LP873X_REG_GPO_DELAY 0X10 +#define LP873X_REG_GPO2_DELAY 0X11 +#define LP873X_REG_GPO_CTRL 0X12 +#define LP873X_REG_CONFIG 0X13 +#define LP873X_REG_PLL_CTRL 0X14 +#define LP873X_REG_PGOOD_CTRL1 0X15 +#define LP873X_REG_PGOOD_CTRL2 0X16 +#define LP873X_REG_PG_FAULT 0X17 +#define LP873X_REG_RESET 0X18 +#define LP873X_REG_INT_TOP_1 0X19 +#define LP873X_REG_INT_TOP_2 0X1A +#define LP873X_REG_INT_BUCK 0X1B +#define LP873X_REG_INT_LDO 0X1C +#define LP873X_REG_TOP_STAT 0X1D +#define LP873X_REG_BUCK_STAT 0X1E +#define LP873X_REG_LDO_STAT 0x1F +#define LP873X_REG_TOP_MASK_1 0x20 +#define LP873X_REG_TOP_MASK_2 0x21 +#define LP873X_REG_BUCK_MASK 0x22 +#define LP873X_REG_LDO_MASK 0x23 +#define LP873X_REG_SEL_I_LOAD 0x24 +#define LP873X_REG_I_LOAD_2 0x25 +#define LP873X_REG_I_LOAD_1 0x26 + +#define LP873X_REG_MAX LP873X_REG_I_LOAD_1 + +/* Register field definitions */ +#define LP873X_DEV_REV_DEV_ID 0xC0 +#define LP873X_DEV_REV_ALL_LAYER 0x30 +#define LP873X_DEV_REV_METAL_LAYER 0x0F + +#define LP873X_OTP_REV_OTP_ID 0xFF + +#define LP873X_BUCK0_CTRL_1_BUCK0_FPWM BIT(3) +#define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2) +#define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1) +#define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0) + +#define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38 +#define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07 + +#define LP873X_BUCK1_CTRL_1_BUCK1_FPWM BIT(3) +#define LP873X_BUCK1_CTRL_1_BUCK1_RDIS_EN BIT(2) +#define LP873X_BUCK1_CTRL_1_BUCK1_EN_PIN_CTRL BIT(1) +#define LP873X_BUCK1_CTRL_1_BUCK1_EN BIT(0) + +#define LP873X_BUCK1_CTRL_2_BUCK1_ILIM 0x38 +#define LP873X_BUCK1_CTRL_2_BUCK1_SLEW_RATE 0x07 + +#define LP873X_BUCK0_VOUT_BUCK0_VSET 0xFF + +#define LP873X_BUCK1_VOUT_BUCK1_VSET 0xFF + +#define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2) +#define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1) +#define LP873X_LDO0_CTRL_LDO0_EN BIT(0) + +#define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2) +#define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1) +#define LP873X_LDO1_CTRL_LDO1_EN BIT(0) + +#define LP873X_LDO0_VOUT_LDO0_VSET 0x1F + +#define LP873X_LDO1_VOUT_LDO1_VSET 0x1F + +#define LP873X_BUCK0_DELAY_BUCK0_SD_DELAY 0xF0 +#define LP873X_BUCK0_DELAY_BUCK0_SU_DELAY 0x0F + +#define LP873X_BUCK1_DELAY_BUCK1_SD_DELAY 0xF0 +#define LP873X_BUCK1_DELAY_BUCK1_SU_DELAY 0x0F + +#define LP873X_LDO0_DELAY_LDO0_SD_DELAY 0xF0 +#define LP873X_LDO0_DELAY_LDO0_SU_DELAY 0x0F + +#define LP873X_LDO1_DELAY_LDO1_SD_DELAY 0xF0 +#define LP873X_LDO1_DELAY_LDO1_SU_DELAY 0x0F + +#define LP873X_GPO_DELAY_GPO_SD_DELAY 0xF0 +#define LP873X_GPO_DELAY_GPO_SU_DELAY 0x0F + +#define LP873X_GPO2_DELAY_GPO2_SD_DELAY 0xF0 +#define LP873X_GPO2_DELAY_GPO2_SU_DELAY 0x0F + +#define LP873X_GPO_CTRL_GPO2_OD BIT(6) +#define LP873X_GPO_CTRL_GPO2_EN_PIN_CTRL BIT(5) +#define LP873X_GPO_CTRL_GPO2_EN BIT(4) +#define LP873X_GPO_CTRL_GPO_OD BIT(2) +#define LP873X_GPO_CTRL_GPO_EN_PIN_CTRL BIT(1) +#define LP873X_GPO_CTRL_GPO_EN BIT(0) + +#define LP873X_CONFIG_SU_DELAY_SEL BIT(6) +#define LP873X_CONFIG_SD_DELAY_SEL BIT(5) +#define LP873X_CONFIG_CLKIN_PIN_SEL BIT(4) +#define LP873X_CONFIG_CLKIN_PD BIT(3) +#define LP873X_CONFIG_EN_PD BIT(2) +#define LP873X_CONFIG_TDIE_WARN_LEVEL BIT(1) +#define LP873X_EN_SPREAD_SPEC BIT(0) + +#define LP873X_PLL_CTRL_EN_PLL BIT(6) +#define LP873X_EXT_CLK_FREQ 0x1F + +#define LP873X_PGOOD_CTRL1_PGOOD_POL BIT(7) +#define LP873X_PGOOD_CTRL1_PGOOD_OD BIT(6) +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOW_LDO BIT(5) +#define LP873X_PGOOD_CTRL1_PGOOD_WINDOWN_BUCK BIT(4) +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO1 BIT(3) +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_LDO0 BIT(2) +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK1 BIT(1) +#define LP873X_PGOOD_CTRL1_PGOOD_EN_PGOOD_BUCK0 BIT(0) + +#define LP873X_PGOOD_CTRL2_EN_PGOOD_TWARN BIT(2) +#define LP873X_PGOOD_CTRL2_EN_PG_FAULT_GATE BIT(1) +#define LP873X_PGOOD_CTRL2_PGOOD_MODE BIT(0) + +#define LP873X_PG_FAULT_PG_FAULT_LDO1 BIT(3) +#define LP873X_PG_FAULT_PG_FAULT_LDO0 BIT(2) +#define LP873X_PG_FAULT_PG_FAULT_BUCK1 BIT(1) +#define LP873X_PG_FAULT_PG_FAULT_BUCK0 BIT(0) + +#define LP873X_RESET_SW_RESET BIT(0) + +#define LP873X_INT_TOP_1_PGOOD_INT BIT(7) +#define LP873X_INT_TOP_1_LDO_INT BIT(6) +#define LP873X_INT_TOP_1_BUCK_INT BIT(5) +#define LP873X_INT_TOP_1_SYNC_CLK_INT BIT(4) +#define LP873X_INT_TOP_1_TDIE_SD_INT BIT(3) +#define LP873X_INT_TOP_1_TDIE_WARN_INT BIT(2) +#define LP873X_INT_TOP_1_OVP_INT BIT(1) +#define LP873X_INT_TOP_1_I_MEAS_INT BIT(0) + +#define LP873X_INT_TOP_2_RESET_REG_INT BIT(0) + +#define LP873X_INT_BUCK_BUCK1_PG_INT BIT(6) +#define LP873X_INT_BUCK_BUCK1_SC_INT BIT(5) +#define LP873X_INT_BUCK_BUCK1_ILIM_INT BIT(4) +#define LP873X_INT_BUCK_BUCK0_PG_INT BIT(2) +#define LP873X_INT_BUCK_BUCK0_SC_INT BIT(1) +#define LP873X_INT_BUCK_BUCK0_ILIM_INT BIT(0) + +#define LP873X_INT_LDO_LDO1_PG_INT BIT(6) +#define LP873X_INT_LDO_LDO1_SC_INT BIT(5) +#define LP873X_INT_LDO_LDO1_ILIM_INT BIT(4) +#define LP873X_INT_LDO_LDO0_PG_INT BIT(2) +#define LP873X_INT_LDO_LDO0_SC_INT BIT(1) +#define LP873X_INT_LDO_LDO0_ILIM_INT BIT(0) + +#define LP873X_TOP_STAT_PGOOD_STAT BIT(7) +#define LP873X_TOP_STAT_SYNC_CLK_STAT BIT(4) +#define LP873X_TOP_STAT_TDIE_SD_STAT BIT(3) +#define LP873X_TOP_STAT_TDIE_WARN_STAT BIT(2) +#define LP873X_TOP_STAT_OVP_STAT BIT(1) + +#define LP873X_BUCK_STAT_BUCK1_STAT BIT(7) +#define LP873X_BUCK_STAT_BUCK1_PG_STAT BIT(6) +#define LP873X_BUCK_STAT_BUCK1_ILIM_STAT BIT(4) +#define LP873X_BUCK_STAT_BUCK0_STAT BIT(3) +#define LP873X_BUCK_STAT_BUCK0_PG_STAT BIT(2) +#define LP873X_BUCK_STAT_BUCK0_ILIM_STAT BIT(0) + +#define LP873X_LDO_STAT_LDO1_STAT BIT(7) +#define LP873X_LDO_STAT_LDO1_PG_STAT BIT(6) +#define LP873X_LDO_STAT_LDO1_ILIM_STAT BIT(4) +#define LP873X_LDO_STAT_LDO0_STAT BIT(3) +#define LP873X_LDO_STAT_LDO0_PG_STAT BIT(2) +#define LP873X_LDO_STAT_LDO0_ILIM_STAT BIT(0) + +#define LP873X_TOP_MASK_1_PGOOD_INT_MASK BIT(7) +#define LP873X_TOP_MASK_1_SYNC_CLK_MASK BIT(4) +#define LP873X_TOP_MASK_1_TDIE_WARN_MASK BIT(2) +#define LP873X_TOP_MASK_1_I_MEAS_MASK BIT(0) + +#define LP873X_TOP_MASK_2_RESET_REG_MASK BIT(0) + +#define LP873X_BUCK_MASK_BUCK1_PGF_MASK BIT(7) +#define LP873X_BUCK_MASK_BUCK1_PGR_MASK BIT(6) +#define LP873X_BUCK_MASK_BUCK1_ILIM_MASK BIT(4) +#define LP873X_BUCK_MASK_BUCK0_PGF_MASK BIT(3) +#define LP873X_BUCK_MASK_BUCK0_PGR_MASK BIT(2) +#define LP873X_BUCK_MASK_BUCK0_ILIM_MASK BIT(0) + +#define LP873X_LDO_MASK_LDO1_PGF_MASK BIT(7) +#define LP873X_LDO_MASK_LDO1_PGR_MASK BIT(6) +#define LP873X_LDO_MASK_LDO1_ILIM_MASK BIT(4) +#define LP873X_LDO_MASK_LDO0_PGF_MASK BIT(3) +#define LP873X_LDO_MASK_LDO0_PGR_MASK BIT(2) +#define LP873X_LDO_MASK_LDO0_ILIM_MASK BIT(0) + +#define LP873X_SEL_I_LOAD_CURRENT_BUCK_SELECT BIT(0) + +#define LP873X_I_LOAD_2_BUCK_LOAD_CURRENT BIT(0) + +#define LP873X_I_LOAD_1_BUCK_LOAD_CURRENT 0xFF + +#define LP873X_MAX_REG_ID LP873X_LDO_1 + +/* Number of step-down converters available */ +#define LP873X_NUM_BUCK 2 +/* Number of LDO voltage regulators available */ +#define LP873X_NUM_LDO 2 +/* Number of total regulators available */ +#define LP873X_NUM_REGULATOR (LP873X_NUM_BUCK + LP873X_NUM_LDO) + +enum lp873x_regulator_id { + /* BUCK's */ + LP873X_BUCK_0, + LP873X_BUCK_1, + /* LDOs */ + LP873X_LDO_0, + LP873X_LDO_1, +}; + +/** + * struct lp873x - state holder for the lp873x driver + * @dev: struct device pointer for MFD device + * @rev: revision of the lp873x + * @lock: lock guarding the data structure + * @regmap: register map of the lp873x PMIC + * + * Device data may be used to access the LP873X chip + */ +struct lp873x { + struct device *dev; + u8 rev; + struct mutex lock; /* lock guarding the data structure */ + struct regmap *regmap; +}; +#endif /* __LINUX_MFD_LP873X_H */
The LP873X chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Configurable General Purpose Output Signals (GPO). PMIC interacts with the main processor through i2c. PMIC has couple of LDOs (Linear Regulators), couple of BUCKs (Step-Down DC-DC Converter Cores) and GPOs (General Purpose Output Signals). Signed-off-by: Keerthy <j-keerthy@ti.com> --- drivers/mfd/Kconfig | 14 +++ drivers/mfd/Makefile | 2 + drivers/mfd/lp873x.c | 99 +++++++++++++++++ include/linux/mfd/lp873x.h | 269 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 384 insertions(+) create mode 100644 drivers/mfd/lp873x.c create mode 100644 include/linux/mfd/lp873x.h