| Message ID | 20160831155009.3216.93787.stgit@bhelgaas-glaptop2.roam.corp.google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Wed, Aug 31, 2016 at 9:50 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: > The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) > where BAR 0 is supposed to be. This is erratum HSE43 in the spec update > referenced below: > > The PCIe* Base Specification indicates that Configuration Space Headers > have a base address register at offset 0x10. Due to this erratum, the > Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function > 3; Offset 0x10) is located where a base register is expected. > > Mark the PCU as having non-compliant BARs so we don't try to probe any of > them. There are no other BARs on this device. > > Rename the quirk so it's not Broadwell-specific. While it's not a big enough battle to fight it sure is irritating to see vendors make the same mistakes over and over again. Wondering if this an error on the respective vendor's BIOS team's part or is this is just being inherited over and over again from Intel's Premier BIOS team reference code? > > Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > --- > arch/x86/pci/fixup.c | 20 +++++++++++++------- > 1 file changed, 13 insertions(+), 7 deletions(-) > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 837ea36..6d52b94 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); > > /* > - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. > + * Device [8086:2fc0] > + * Erratum HSE43 > + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > * > - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > - * entry BDF2. > + * Devices [8086:6f60,6fa0,6fc0] > + * Erratum BDF2 > + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > */ > -static void pci_bdwep_bar(struct pci_dev *dev) > +static void pci_invalid_bar(struct pci_dev *dev) > { > dev->non_compliant_bars = 1; > } > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); > Acked-by: Myron Stowe <myron.stowe@redhat.com> -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/31/2016 12:46 PM, Myron Stowe wrote: > On Wed, Aug 31, 2016 at 9:50 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: >> The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) >> where BAR 0 is supposed to be. This is erratum HSE43 in the spec update >> referenced below: >> >> The PCIe* Base Specification indicates that Configuration Space Headers >> have a base address register at offset 0x10. Due to this erratum, the >> Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function >> 3; Offset 0x10) is located where a base register is expected. >> >> Mark the PCU as having non-compliant BARs so we don't try to probe any of >> them. There are no other BARs on this device. >> >> Rename the quirk so it's not Broadwell-specific. > > While it's not a big enough battle to fight it sure is irritating to > see vendors make the same mistakes over and over again. Wondering if > this an error on the respective vendor's BIOS team's part or is this > is just being inherited over and over again from Intel's Premier BIOS > team reference code? > This isn't a BIOS issue. The actual hardware is manufactured this way, and the documentation indicates that the hardware has non-compliant BARs. Testing and reviewing now ... P. >> >> Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html >> Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 >> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> >> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> >> --- >> arch/x86/pci/fixup.c | 20 +++++++++++++------- >> 1 file changed, 13 insertions(+), 7 deletions(-) >> >> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c >> index 837ea36..6d52b94 100644 >> --- a/arch/x86/pci/fixup.c >> +++ b/arch/x86/pci/fixup.c >> @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) >> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); >> >> /* >> - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. >> + * Device [8086:2fc0] >> + * Erratum HSE43 >> + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset >> + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html >> * >> - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html >> - * entry BDF2. >> + * Devices [8086:6f60,6fa0,6fc0] >> + * Erratum BDF2 >> + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration >> + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html >> */ >> -static void pci_bdwep_bar(struct pci_dev *dev) >> +static void pci_invalid_bar(struct pci_dev *dev) >> { >> dev->non_compliant_bars = 1; >> } >> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); >> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); >> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); >> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); >> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); >> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); >> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); >> > > Acked-by: Myron Stowe <myron.stowe@redhat.com> > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 08/31/2016 11:50 AM, Bjorn Helgaas wrote: > The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) > where BAR 0 is supposed to be. This is erratum HSE43 in the spec update > referenced below: > > The PCIe* Base Specification indicates that Configuration Space Headers > have a base address register at offset 0x10. Due to this erratum, the > Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function > 3; Offset 0x10) is located where a base register is expected. > > Mark the PCU as having non-compliant BARs so we don't try to probe any of > them. There are no other BARs on this device. > > Rename the quirk so it's not Broadwell-specific. > > Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > --- > arch/x86/pci/fixup.c | 20 +++++++++++++------- > 1 file changed, 13 insertions(+), 7 deletions(-) > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 837ea36..6d52b94 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); > > /* > - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. > + * Device [8086:2fc0] > + * Erratum HSE43 > + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > * Bjorn, I really think you should point at this doc: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html Section 5.4, Device 30 Function 3 which states (at the bottom of the config space diagram) "Note: The CSR located at offset in Device 30, Function 3, Offset 0x10 is not a Configuration Space Header and SW should not treat it as such." as it is more informative of the issue. I'm also slightly concerned about blacklisting the rest of the config space, but I don't see any systems that have non-zero BARs but that's a lesser issue. Beyond that, testing went well. P. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 31, 2016 at 11:12 AM, Prarit Bhargava <prarit@redhat.com> wrote: > On 08/31/2016 12:46 PM, Myron Stowe wrote: >> On Wed, Aug 31, 2016 at 9:50 AM, Bjorn Helgaas <bhelgaas@google.com> wrote: >>> The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) >>> where BAR 0 is supposed to be. This is erratum HSE43 in the spec update >>> referenced below: >>> >>> The PCIe* Base Specification indicates that Configuration Space Headers >>> have a base address register at offset 0x10. Due to this erratum, the >>> Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function >>> 3; Offset 0x10) is located where a base register is expected. >>> >>> Mark the PCU as having non-compliant BARs so we don't try to probe any of >>> them. There are no other BARs on this device. >>> >>> Rename the quirk so it's not Broadwell-specific. >> >> While it's not a big enough battle to fight it sure is irritating to >> see vendors make the same mistakes over and over again. Wondering if >> this an error on the respective vendor's BIOS team's part or is this >> is just being inherited over and over again from Intel's Premier BIOS >> team reference code? >> > > This isn't a BIOS issue. The actual hardware is manufactured this > way, and the documentation indicates that the hardware has > non-compliant BARs. Granted, at the root it is a HW problem, and one that seems Intel duplicated forward. That said, the workaround for the HW is for BIOS to "hide" the register which is what was done in the prior instance. I've always wondered how BIOS does that so if anyone can explain I'd be interested in learning that. > > Testing and reviewing now ... > > P. > > > >>> >>> Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html >>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 >>> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> >>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> >>> --- >>> arch/x86/pci/fixup.c | 20 +++++++++++++------- >>> 1 file changed, 13 insertions(+), 7 deletions(-) >>> >>> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c >>> index 837ea36..6d52b94 100644 >>> --- a/arch/x86/pci/fixup.c >>> +++ b/arch/x86/pci/fixup.c >>> @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) >>> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); >>> >>> /* >>> - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. >>> + * Device [8086:2fc0] >>> + * Erratum HSE43 >>> + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset >>> + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html >>> * >>> - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html >>> - * entry BDF2. >>> + * Devices [8086:6f60,6fa0,6fc0] >>> + * Erratum BDF2 >>> + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration >>> + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html >>> */ >>> -static void pci_bdwep_bar(struct pci_dev *dev) >>> +static void pci_invalid_bar(struct pci_dev *dev) >>> { >>> dev->non_compliant_bars = 1; >>> } >>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); >>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); >>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); >>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); >>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); >>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); >>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); >>> >> >> Acked-by: Myron Stowe <myron.stowe@redhat.com> >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 31, 2016 at 01:42:13PM -0400, Prarit Bhargava wrote: > On 08/31/2016 11:50 AM, Bjorn Helgaas wrote: > > The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) > > where BAR 0 is supposed to be. This is erratum HSE43 in the spec update > > referenced below: > > > > The PCIe* Base Specification indicates that Configuration Space Headers > > have a base address register at offset 0x10. Due to this erratum, the > > Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function > > 3; Offset 0x10) is located where a base register is expected. > > > > Mark the PCU as having non-compliant BARs so we don't try to probe any of > > them. There are no other BARs on this device. > > > > Rename the quirk so it's not Broadwell-specific. > > > > Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 > > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > --- > > arch/x86/pci/fixup.c | 20 +++++++++++++------- > > 1 file changed, 13 insertions(+), 7 deletions(-) > > > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > > index 837ea36..6d52b94 100644 > > --- a/arch/x86/pci/fixup.c > > +++ b/arch/x86/pci/fixup.c > > @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); > > > > /* > > - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. > > + * Device [8086:2fc0] > > + * Erratum HSE43 > > + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset > > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > > * > > Bjorn, > > I really think you should point at this doc: > > http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html > > Section 5.4, Device 30 Function 3 > > which states (at the bottom of the config space diagram) "Note: The CSR located > at offset in Device 30, Function 3, Offset 0x10 is not a Configuration Space > Header and SW should not treat it as such." > > as it is more informative of the issue. > > I'm also slightly concerned about blacklisting the rest of the config space, but > I don't see any systems that have non-zero BARs but that's a lesser issue. > > Beyond that, testing went well. I added the link to the changelog, but I don't think it really adds much about the issue. It basically says "we screwed up and generic PCI BAR sizing SW should magically ignore the register at 0x10." Thanks for testing it; I added your Tested-by. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 31, 2016 at 10:50:09AM -0500, Bjorn Helgaas wrote: > The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) > where BAR 0 is supposed to be. This is erratum HSE43 in the spec update > referenced below: > > The PCIe* Base Specification indicates that Configuration Space Headers > have a base address register at offset 0x10. Due to this erratum, the > Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function > 3; Offset 0x10) is located where a base register is expected. > > Mark the PCU as having non-compliant BARs so we don't try to probe any of > them. There are no other BARs on this device. > > Rename the quirk so it's not Broadwell-specific. > > Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 > Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> I applied this with Myron's ack and Prarit's tested-by to for-linus for v4.8. > --- > arch/x86/pci/fixup.c | 20 +++++++++++++------- > 1 file changed, 13 insertions(+), 7 deletions(-) > > diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c > index 837ea36..6d52b94 100644 > --- a/arch/x86/pci/fixup.c > +++ b/arch/x86/pci/fixup.c > @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); > > /* > - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. > + * Device [8086:2fc0] > + * Erratum HSE43 > + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html > * > - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > - * entry BDF2. > + * Devices [8086:6f60,6fa0,6fc0] > + * Erratum BDF2 > + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration > + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html > */ > -static void pci_bdwep_bar(struct pci_dev *dev) > +static void pci_invalid_bar(struct pci_dev *dev) > { > dev->non_compliant_bars = 1; > } > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); > -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 837ea36..6d52b94 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); /* - * Broadwell EP Home Agent BARs erroneously return non-zero values when read. + * Device [8086:2fc0] + * Erratum HSE43 + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html * - * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html - * entry BDF2. + * Devices [8086:6f60,6fa0,6fc0] + * Erratum BDF2 + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html */ -static void pci_bdwep_bar(struct pci_dev *dev) +static void pci_invalid_bar(struct pci_dev *dev) { dev->non_compliant_bars = 1; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);
The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL) where BAR 0 is supposed to be. This is erratum HSE43 in the spec update referenced below: The PCIe* Base Specification indicates that Configuration Space Headers have a base address register at offset 0x10. Due to this erratum, the Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function 3; Offset 0x10) is located where a base register is expected. Mark the PCU as having non-compliant BARs so we don't try to probe any of them. There are no other BARs on this device. Rename the quirk so it's not Broadwell-specific. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> --- arch/x86/pci/fixup.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html