| Message ID | 1473093097-30932-5-git-send-email-punit.agrawal@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Sep 05, 2016 at 05:31:34PM +0100, Punit Agrawal wrote: > From: Mark Rutland <mark.rutland@arm.com> > > As with dsb() and isb(), add a __tlbi() helper so that we can avoid > distracting asm boilerplate every time we want a TLBI. As some TLBI > operations take an argument while others do not, some pre-processor is > used to handle these two cases with different assembly blocks. > > The existing tlbflush.h code is moved over to use the helper. > > Signed-off-by: Mark Rutland <mark.rutland@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > [ rename helper to __tlbi, update commit log ] > Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> > --- > arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- > 1 file changed, 23 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h > index b460ae2..e9e42a7 100644 > --- a/arch/arm64/include/asm/tlbflush.h > +++ b/arch/arm64/include/asm/tlbflush.h > @@ -25,6 +25,21 @@ > #include <asm/cputype.h> > > /* > + * Raw TLBI operations. Drivers and most kernel code should use the TLB > + * management routines below in preference to these. Where necessary, these can in preference to these? > + * be used to avoid asm() boilerplate. 'these' seem to be a bit overloaded in this commentary. > + * > + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a > + * particular TLBI op takes an argument or not. The macros below handle invoking > + * the asm with or without the register argument as appropriate. > + */ > +#define __TLBI_0(op, arg) asm ("tlbi " #op) > +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) > +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) > + > +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) > + > +/* > * TLB Management > * ============== > * > @@ -66,7 +81,7 @@ > static inline void local_flush_tlb_all(void) > { > dsb(nshst); > - asm("tlbi vmalle1"); > + __tlbi(vmalle1); > dsb(nsh); > isb(); > } > @@ -74,7 +89,7 @@ static inline void local_flush_tlb_all(void) > static inline void flush_tlb_all(void) > { > dsb(ishst); > - asm("tlbi vmalle1is"); > + __tlbi(vmalle1is); > dsb(ish); > isb(); > } > @@ -84,7 +99,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) > unsigned long asid = ASID(mm) << 48; > > dsb(ishst); > - asm("tlbi aside1is, %0" : : "r" (asid)); > + __tlbi(aside1is, asid); > dsb(ish); > } > > @@ -94,7 +109,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, > unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); > > dsb(ishst); > - asm("tlbi vale1is, %0" : : "r" (addr)); > + __tlbi(vale1is, addr); > dsb(ish); > } > > @@ -122,9 +137,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, > dsb(ishst); > for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { > if (last_level) > - asm("tlbi vale1is, %0" : : "r"(addr)); > + __tlbi(vale1is, addr); > else > - asm("tlbi vae1is, %0" : : "r"(addr)); > + __tlbi(vae1is, addr); > } > dsb(ish); > } > @@ -149,7 +164,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end > > dsb(ishst); > for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) > - asm("tlbi vaae1is, %0" : : "r"(addr)); > + __tlbi(vaae1is, addr); > dsb(ish); > isb(); > } > @@ -163,7 +178,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, > { > unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); > > - asm("tlbi vae1is, %0" : : "r" (addr)); > + __tlbi(vae1is, addr); > dsb(ish); > } > > -- > 2.8.1 > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Christoffer Dall <christoffer.dall@linaro.org> writes: > On Mon, Sep 05, 2016 at 05:31:34PM +0100, Punit Agrawal wrote: >> From: Mark Rutland <mark.rutland@arm.com> >> >> As with dsb() and isb(), add a __tlbi() helper so that we can avoid >> distracting asm boilerplate every time we want a TLBI. As some TLBI >> operations take an argument while others do not, some pre-processor is >> used to handle these two cases with different assembly blocks. >> >> The existing tlbflush.h code is moved over to use the helper. >> >> Signed-off-by: Mark Rutland <mark.rutland@arm.com> >> Cc: Catalin Marinas <catalin.marinas@arm.com> >> Cc: Marc Zyngier <marc.zyngier@arm.com> >> Cc: Will Deacon <will.deacon@arm.com> >> [ rename helper to __tlbi, update commit log ] >> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> >> --- >> arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- >> 1 file changed, 23 insertions(+), 8 deletions(-) >> >> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h >> index b460ae2..e9e42a7 100644 >> --- a/arch/arm64/include/asm/tlbflush.h >> +++ b/arch/arm64/include/asm/tlbflush.h >> @@ -25,6 +25,21 @@ >> #include <asm/cputype.h> >> >> /* >> + * Raw TLBI operations. Drivers and most kernel code should use the TLB >> + * management routines below in preference to these. Where necessary, these can > > in preference to these? > >> + * be used to avoid asm() boilerplate. > > 'these' seem to be a bit overloaded in this commentary. > I've locally updated the comment to - "Raw TLBI operations. Where necessary, use the __tlbi macro to avoid asm() boilerplate. *Note:* Drivers and most kernel code should use the TLB management routines in preference to the macros." Is that better? >> + * >> + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a >> + * particular TLBI op takes an argument or not. The macros below handle invoking >> + * the asm with or without the register argument as appropriate. >> + */ >> +#define __TLBI_0(op, arg) asm ("tlbi " #op) >> +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) >> +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) >> + >> +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) >> + >> +/* >> * TLB Management >> * ============== >> * >> @@ -66,7 +81,7 @@ >> static inline void local_flush_tlb_all(void) >> { >> dsb(nshst); >> - asm("tlbi vmalle1"); >> + __tlbi(vmalle1); >> dsb(nsh); >> isb(); >> } >> @@ -74,7 +89,7 @@ static inline void local_flush_tlb_all(void) >> static inline void flush_tlb_all(void) >> { >> dsb(ishst); >> - asm("tlbi vmalle1is"); >> + __tlbi(vmalle1is); >> dsb(ish); >> isb(); >> } >> @@ -84,7 +99,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) >> unsigned long asid = ASID(mm) << 48; >> >> dsb(ishst); >> - asm("tlbi aside1is, %0" : : "r" (asid)); >> + __tlbi(aside1is, asid); >> dsb(ish); >> } >> >> @@ -94,7 +109,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, >> unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); >> >> dsb(ishst); >> - asm("tlbi vale1is, %0" : : "r" (addr)); >> + __tlbi(vale1is, addr); >> dsb(ish); >> } >> >> @@ -122,9 +137,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, >> dsb(ishst); >> for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { >> if (last_level) >> - asm("tlbi vale1is, %0" : : "r"(addr)); >> + __tlbi(vale1is, addr); >> else >> - asm("tlbi vae1is, %0" : : "r"(addr)); >> + __tlbi(vae1is, addr); >> } >> dsb(ish); >> } >> @@ -149,7 +164,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end >> >> dsb(ishst); >> for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) >> - asm("tlbi vaae1is, %0" : : "r"(addr)); >> + __tlbi(vaae1is, addr); >> dsb(ish); >> isb(); >> } >> @@ -163,7 +178,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, >> { >> unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); >> >> - asm("tlbi vae1is, %0" : : "r" (addr)); >> + __tlbi(vae1is, addr); >> dsb(ish); >> } >> >> -- >> 2.8.1 >> > _______________________________________________ > kvmarm mailing list > kvmarm@lists.cs.columbia.edu > https://lists.cs.columbia.edu/mailman/listinfo/kvmarm -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 06, 2016 at 11:05:17AM +0100, Punit Agrawal wrote: > Christoffer Dall <christoffer.dall@linaro.org> writes: > > > On Mon, Sep 05, 2016 at 05:31:34PM +0100, Punit Agrawal wrote: > >> From: Mark Rutland <mark.rutland@arm.com> > >> > >> As with dsb() and isb(), add a __tlbi() helper so that we can avoid > >> distracting asm boilerplate every time we want a TLBI. As some TLBI > >> operations take an argument while others do not, some pre-processor is > >> used to handle these two cases with different assembly blocks. > >> > >> The existing tlbflush.h code is moved over to use the helper. > >> > >> Signed-off-by: Mark Rutland <mark.rutland@arm.com> > >> Cc: Catalin Marinas <catalin.marinas@arm.com> > >> Cc: Marc Zyngier <marc.zyngier@arm.com> > >> Cc: Will Deacon <will.deacon@arm.com> > >> [ rename helper to __tlbi, update commit log ] > >> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> > >> --- > >> arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- > >> 1 file changed, 23 insertions(+), 8 deletions(-) > >> > >> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h > >> index b460ae2..e9e42a7 100644 > >> --- a/arch/arm64/include/asm/tlbflush.h > >> +++ b/arch/arm64/include/asm/tlbflush.h > >> @@ -25,6 +25,21 @@ > >> #include <asm/cputype.h> > >> > >> /* > >> + * Raw TLBI operations. Drivers and most kernel code should use the TLB > >> + * management routines below in preference to these. Where necessary, these can > > > > in preference to these? > > > >> + * be used to avoid asm() boilerplate. > > > > 'these' seem to be a bit overloaded in this commentary. > > > > I've locally updated the comment to - > > "Raw TLBI operations. > > Where necessary, use the __tlbi macro to avoid asm() > boilerplate. *Note:* Drivers and most kernel code should use the > TLB management routines in preference to the macros." > > Is that better? Yes. I would get rid of the *Note:* part, but that's really nit-picking. Thanks, -Christoffer > > >> + * > >> + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a > >> + * particular TLBI op takes an argument or not. The macros below handle invoking > >> + * the asm with or without the register argument as appropriate. > >> + */ > >> +#define __TLBI_0(op, arg) asm ("tlbi " #op) > >> +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) > >> +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) > >> + > >> +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) > >> + > >> +/* > >> * TLB Management > >> * ============== > >> * > >> @@ -66,7 +81,7 @@ > >> static inline void local_flush_tlb_all(void) > >> { > >> dsb(nshst); > >> - asm("tlbi vmalle1"); > >> + __tlbi(vmalle1); > >> dsb(nsh); > >> isb(); > >> } > >> @@ -74,7 +89,7 @@ static inline void local_flush_tlb_all(void) > >> static inline void flush_tlb_all(void) > >> { > >> dsb(ishst); > >> - asm("tlbi vmalle1is"); > >> + __tlbi(vmalle1is); > >> dsb(ish); > >> isb(); > >> } > >> @@ -84,7 +99,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) > >> unsigned long asid = ASID(mm) << 48; > >> > >> dsb(ishst); > >> - asm("tlbi aside1is, %0" : : "r" (asid)); > >> + __tlbi(aside1is, asid); > >> dsb(ish); > >> } > >> > >> @@ -94,7 +109,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, > >> unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); > >> > >> dsb(ishst); > >> - asm("tlbi vale1is, %0" : : "r" (addr)); > >> + __tlbi(vale1is, addr); > >> dsb(ish); > >> } > >> > >> @@ -122,9 +137,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, > >> dsb(ishst); > >> for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { > >> if (last_level) > >> - asm("tlbi vale1is, %0" : : "r"(addr)); > >> + __tlbi(vale1is, addr); > >> else > >> - asm("tlbi vae1is, %0" : : "r"(addr)); > >> + __tlbi(vae1is, addr); > >> } > >> dsb(ish); > >> } > >> @@ -149,7 +164,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end > >> > >> dsb(ishst); > >> for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) > >> - asm("tlbi vaae1is, %0" : : "r"(addr)); > >> + __tlbi(vaae1is, addr); > >> dsb(ish); > >> isb(); > >> } > >> @@ -163,7 +178,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, > >> { > >> unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); > >> > >> - asm("tlbi vae1is, %0" : : "r" (addr)); > >> + __tlbi(vae1is, addr); > >> dsb(ish); > >> } > >> > >> -- > >> 2.8.1 > >> > > _______________________________________________ > > kvmarm mailing list > > kvmarm@lists.cs.columbia.edu > > https://lists.cs.columbia.edu/mailman/listinfo/kvmarm -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Sep 05, 2016 at 05:31:34PM +0100, Punit Agrawal wrote: > From: Mark Rutland <mark.rutland@arm.com> > > As with dsb() and isb(), add a __tlbi() helper so that we can avoid > distracting asm boilerplate every time we want a TLBI. As some TLBI > operations take an argument while others do not, some pre-processor is > used to handle these two cases with different assembly blocks. > > The existing tlbflush.h code is moved over to use the helper. > > Signed-off-by: Mark Rutland <mark.rutland@arm.com> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > [ rename helper to __tlbi, update commit log ] > Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> > --- > arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++-------- > 1 file changed, 23 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h > index b460ae2..e9e42a7 100644 > --- a/arch/arm64/include/asm/tlbflush.h > +++ b/arch/arm64/include/asm/tlbflush.h > @@ -25,6 +25,21 @@ > #include <asm/cputype.h> > > /* > + * Raw TLBI operations. Drivers and most kernel code should use the TLB > + * management routines below in preference to these. Where necessary, these can > + * be used to avoid asm() boilerplate. > + * > + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a > + * particular TLBI op takes an argument or not. The macros below handle invoking > + * the asm with or without the register argument as appropriate. > + */ > +#define __TLBI_0(op, arg) asm ("tlbi " #op) > +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) > +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) > + > +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) This looks ok to me now. With Christoffer's comments address: Reviewed-by: Will Deacon <will.deacon@arm.com> Will -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index b460ae2..e9e42a7 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -25,6 +25,21 @@ #include <asm/cputype.h> /* + * Raw TLBI operations. Drivers and most kernel code should use the TLB + * management routines below in preference to these. Where necessary, these can + * be used to avoid asm() boilerplate. + * + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a + * particular TLBI op takes an argument or not. The macros below handle invoking + * the asm with or without the register argument as appropriate. + */ +#define __TLBI_0(op, arg) asm ("tlbi " #op) +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) + +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) + +/* * TLB Management * ============== * @@ -66,7 +81,7 @@ static inline void local_flush_tlb_all(void) { dsb(nshst); - asm("tlbi vmalle1"); + __tlbi(vmalle1); dsb(nsh); isb(); } @@ -74,7 +89,7 @@ static inline void local_flush_tlb_all(void) static inline void flush_tlb_all(void) { dsb(ishst); - asm("tlbi vmalle1is"); + __tlbi(vmalle1is); dsb(ish); isb(); } @@ -84,7 +99,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) unsigned long asid = ASID(mm) << 48; dsb(ishst); - asm("tlbi aside1is, %0" : : "r" (asid)); + __tlbi(aside1is, asid); dsb(ish); } @@ -94,7 +109,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); dsb(ishst); - asm("tlbi vale1is, %0" : : "r" (addr)); + __tlbi(vale1is, addr); dsb(ish); } @@ -122,9 +137,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { if (last_level) - asm("tlbi vale1is, %0" : : "r"(addr)); + __tlbi(vale1is, addr); else - asm("tlbi vae1is, %0" : : "r"(addr)); + __tlbi(vae1is, addr); } dsb(ish); } @@ -149,7 +164,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) - asm("tlbi vaae1is, %0" : : "r"(addr)); + __tlbi(vaae1is, addr); dsb(ish); isb(); } @@ -163,7 +178,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, { unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); - asm("tlbi vae1is, %0" : : "r" (addr)); + __tlbi(vae1is, addr); dsb(ish); }