@@ -274,14 +274,14 @@ static int hilse_match(hil_mlc *mlc, int unused)
/* An LCV used to prevent runaway loops, forces 5 second sleep when reset. */
static int hilse_init_lcv(hil_mlc *mlc, int unused)
{
- struct timeval tv;
+ time64_t time;
- do_gettimeofday(&tv);
+ time = ktime_get_seconds();
- if (mlc->lcv && (tv.tv_sec - mlc->lcv_tv.tv_sec) < 5)
+ if (mlc->lcv && (time - mlc->lcv_tv.tv_sec) < 5)
return -1;
- mlc->lcv_tv = tv;
+ mlc->lcv_tv.tv_sec = time;
mlc->lcv = 0;
return 0;
@@ -466,7 +466,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_SLEEP, 0)
/* 1 HILSEN_RESTART */
- FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0)
+ FUNC(hilse_inc_lcv, 10000, HILSEN_NEXT, HILSEN_START, 0)
OUT(HIL_CTRL_ONLY) /* Disable APE */
CTS
@@ -485,7 +485,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_SLEEP, 0)
/* 10 HILSEN_DHR2 */
- FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0)
+ FUNC(hilse_inc_lcv, 10000, HILSEN_NEXT, HILSEN_START, 0)
FUNC(hilse_set_ddi, -1, HILSEN_NEXT, 0, 0)
OUT(HIL_PKT_CMD | HIL_CMD_DHR)
IN(300000, HILSEN_DHR2, HILSEN_DHR2, HILSEN_NEXT)
@@ -515,7 +515,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
FUNC(hilse_init_lcv, 0, HILSEN_NEXT, HILSEN_DOZE, 0)
/* 22 HILSEN_ACF2 */
- FUNC(hilse_inc_lcv, 10, HILSEN_NEXT, HILSEN_START, 0)
+ FUNC(hilse_inc_lcv, 10000, HILSEN_NEXT, HILSEN_START, 0)
OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1)
IN(20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_NEXT)
@@ -572,7 +572,7 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
OUT(HIL_PKT_CMD | HIL_CMD_RPL)
EXPECT(HIL_PKT_CMD | HIL_CMD_RPL | HIL_ERR_INT,
20000, HILSEN_NEXT, HILSEN_DSR, HILSEN_NEXT)
- FUNC(hilse_operate, 1, HILSEN_OPERATE, HILSEN_IFC, HILSEN_PROBE)
+ FUNC(hilse_operate, 1000, HILSEN_OPERATE, HILSEN_IFC, HILSEN_PROBE)
/* 58 HILSEN_IFCACF */
OUT(HIL_PKT_CMD | HIL_CMD_IFC)
@@ -584,7 +584,6 @@ static const struct hilse_node hil_mlc_se[HILSEN_END] = {
static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node)
{
-
switch (node->act) {
case HILSE_EXPECT_DISC:
mlc->imatch = node->object.packet;
@@ -605,7 +604,7 @@ static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node
}
mlc->istarted = 1;
mlc->intimeout = node->arg;
- do_gettimeofday(&(mlc->instart));
+ ktime_get_ts64(&(mlc->instart));
mlc->icount = 15;
memset(mlc->ipacket, 0, 16 * sizeof(hil_packet));
BUG_ON(down_trylock(&mlc->isem));
@@ -710,7 +709,7 @@ static int hilse_donode(hil_mlc *mlc)
break;
}
mlc->ostarted = 0;
- do_gettimeofday(&(mlc->instart));
+ ktime_get_ts64(&(mlc->instart));
write_unlock_irqrestore(&mlc->lock, flags);
nextidx = HILSEN_NEXT;
break;
@@ -731,18 +730,18 @@ static int hilse_donode(hil_mlc *mlc)
#endif
while (nextidx & HILSEN_SCHED) {
- struct timeval tv;
+ struct timespec64 ts;
if (!sched_long)
goto sched;
- do_gettimeofday(&tv);
- tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec);
- tv.tv_usec -= mlc->instart.tv_usec;
- if (tv.tv_usec >= mlc->intimeout) goto sched;
- tv.tv_usec = (mlc->intimeout - tv.tv_usec) * HZ / USEC_PER_SEC;
- if (!tv.tv_usec) goto sched;
- mod_timer(&hil_mlcs_kicker, jiffies + tv.tv_usec);
+ ktime_get_ts64(&ts);
+ ts.tv_nsec += NSEC_PER_SEC * (ts.tv_sec - mlc->instart.tv_sec);
+ ts.tv_nsec -= mlc->instart.tv_nsec;
+ if (ts.tv_nsec >= mlc->intimeout) goto sched;
+ ts.tv_nsec = (mlc->intimeout - ts.tv_nsec) * HZ / NSEC_PER_SEC;
+ if (!ts.tv_nsec) goto sched;
+ mod_timer(&hil_mlcs_kicker, jiffies + ts.tv_nsec);
break;
sched:
tasklet_schedule(&hil_mlcs_tasklet);
@@ -193,7 +193,7 @@ static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
curr->seq[curr->idx++] = status;
curr->seq[curr->idx++] = data;
hp_sdc.rqty -= 2;
- do_gettimeofday(&hp_sdc.rtv);
+ ktime_get_ts64(&hp_sdc.rtv);
if (hp_sdc.rqty <= 0) {
/* All data has been gathered. */
@@ -306,13 +306,13 @@ static void hp_sdc_tasklet(unsigned long foo)
write_lock_irq(&hp_sdc.rtq_lock);
if (hp_sdc.rcurr >= 0) {
- struct timeval tv;
+ struct timespec64 ts;
- do_gettimeofday(&tv);
- if (tv.tv_sec > hp_sdc.rtv.tv_sec)
- tv.tv_usec += USEC_PER_SEC;
+ ktime_get_ts64(&ts);
+ if (ts.tv_sec > hp_sdc.rtv.tv_sec)
+ ts.tv_nsec += NSEC_PER_SEC;
- if (tv.tv_usec - hp_sdc.rtv.tv_usec > HP_SDC_MAX_REG_DELAY) {
+ if (ts.tv_nsec - hp_sdc.rtv.tv_nsec > HP_SDC_MAX_REG_DELAY) {
hp_sdc_transaction *curr;
uint8_t tmp;
@@ -322,7 +322,8 @@ static void hp_sdc_tasklet(unsigned long foo)
* it back to the application. and be less verbose.
*/
printk(KERN_WARNING PREFIX "read timeout (%ius)!\n",
- (int)(tv.tv_usec - hp_sdc.rtv.tv_usec));
+ (int)(ts.tv_nsec - hp_sdc.rtv.tv_nsec) /
+ (int)NSEC_PER_USEC);
curr->idx += hp_sdc.rqty;
hp_sdc.rqty = 0;
tmp = curr->seq[curr->actidx];
@@ -551,7 +552,7 @@ unsigned long hp_sdc_put(void)
/* Start a new read */
hp_sdc.rqty = curr->seq[curr->idx];
- do_gettimeofday(&hp_sdc.rtv);
+ ktime_get_ts64(&hp_sdc.rtv);
curr->idx++;
/* Still need to lock here in case of spurious irq. */
write_lock_irq(&hp_sdc.rtq_lock);
@@ -149,7 +149,7 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
/* Try to down the semaphore */
if (down_trylock(&mlc->isem)) {
- struct timeval tv;
+ struct timespec64 ts;
if (priv->emtestmode) {
mlc->ipacket[0] =
HIL_ERR_INT | (mlc->opacket &
@@ -160,11 +160,11 @@ static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
/* printk(KERN_DEBUG PREFIX ">[%x]\n", mlc->ipacket[0]); */
goto wasup;
}
- do_gettimeofday(&tv);
- tv.tv_usec += USEC_PER_SEC * (tv.tv_sec - mlc->instart.tv_sec);
- if (tv.tv_usec - mlc->instart.tv_usec > mlc->intimeout) {
+ ktime_get_ts64(&ts);
+ ts.tv_nsec += NSEC_PER_SEC * (ts.tv_sec - mlc->instart.tv_sec);
+ if (ts.tv_nsec - mlc->instart.tv_nsec > mlc->intimeout) {
/* printk("!%i %i",
- tv.tv_usec - mlc->instart.tv_usec,
+ tv.tv_nsec - mlc->instart.tv_nsec,
mlc->intimeout);
*/
rc = 1;
@@ -32,7 +32,7 @@
*/
#include <linux/hil.h>
-#include <linux/time.h>
+#include <linux/time64.h>
#include <linux/interrupt.h>
#include <linux/semaphore.h>
#include <linux/serio.h>
@@ -144,12 +144,12 @@ struct hil_mlc {
hil_packet ipacket[16];
hil_packet imatch;
int icount;
- struct timeval instart;
+ struct timespec64 instart;
suseconds_t intimeout;
int ddi; /* Last operational device id */
int lcv; /* LCV to throttle loops */
- struct timeval lcv_tv; /* Time loop was started */
+ struct timespec64 lcv_tv; /* Time loop was started */
int di_map[7]; /* Maps below items to live devs */
struct hil_mlc_devinfo di[HIL_MLC_DEVMEM];
@@ -47,9 +47,9 @@
#endif
-/* No 4X status reads take longer than this (in usec).
+/* No 4X status reads take longer than this (in nsec).
*/
-#define HP_SDC_MAX_REG_DELAY 20000
+#define HP_SDC_MAX_REG_DELAY 20000000
typedef void (hp_sdc_irqhook) (int irq, void *dev_id,
uint8_t status, uint8_t data);
@@ -281,7 +281,7 @@ typedef struct {
hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
int rcurr, rqty; /* Current read transact in process */
- struct timeval rtv; /* Time when current read started */
+ struct timespec64 rtv; /* Monotonic time when current read started */
int wcurr; /* Current write transact in process */
int dev_err; /* carries status from registration */
struct timeval is not y2038 safe. All references to timeval will be deleted from the kernel to make it y2038 safe. Replace its uses by y2038 safe struct timespec64. The timestamps changed here only keep track of delta times. These timestamps are also internal to kernel. Hence, monotonic times are sufficient here. The unit of the delta times is also changed in certain cases to nanoseconds rather than microseconds. This is in line with timespec64 which keeps time in nanoseconds. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> --- drivers/input/serio/hil_mlc.c | 37 ++++++++++++++++++------------------- drivers/input/serio/hp_sdc.c | 17 +++++++++-------- drivers/input/serio/hp_sdc_mlc.c | 10 +++++----- include/linux/hil_mlc.h | 6 +++--- include/linux/hp_sdc.h | 6 +++--- 5 files changed, 38 insertions(+), 38 deletions(-)