| Message ID | 1473759262-27031-4-git-send-email-kernel@martin.sperl.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
> kernel@martin.sperl.org hat am 13. September 2016 um 11:34 geschrieben: > > > From: Martin Sperl <kernel@martin.sperl.org> > > Add the node for the thermal sensor of the bcm2835-soc > to the device tree. > > Signed-off-by: Martin Sperl <kernel@martin.sperl.org> > > Changelog: > V1 -> V5: generic settings is shared in bcm283x.dtsi, but disabled > moved the compatible string to the SOC specific dtsi > for arm and arm64 > > Note: there is no arm/boot/dts/bcm2837.dtsi as of now, > so there is no support for bcm2837 in 32 bit mode. > --- > arch/arm/boot/dts/bcm2835.dtsi | 6 ++++++ > arch/arm/boot/dts/bcm2836.dtsi | 6 ++++++ > arch/arm/boot/dts/bcm283x.dtsi | 7 +++++++ > 3 files changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi > index a78759e..0890d97 100644 > --- a/arch/arm/boot/dts/bcm2835.dtsi > +++ b/arch/arm/boot/dts/bcm2835.dtsi > @@ -23,3 +23,9 @@ > }; > }; > }; > + > +/* enable thermal sensor with the correct compatible property set */ > +&thermal { > + compatible = "brcm,bcm2835-thermal"; > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi > index 9d0651d..519a44f 100644 > --- a/arch/arm/boot/dts/bcm2836.dtsi > +++ b/arch/arm/boot/dts/bcm2836.dtsi > @@ -76,3 +76,9 @@ > interrupt-parent = <&local_intc>; > interrupts = <8>; > }; > + > +/* enable thermal sensor with the correct compatible property set */ > +&thermal { > + compatible = "brcm,bcm2836-thermal"; > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > index b982522..2cc4847 100644 > --- a/arch/arm/boot/dts/bcm283x.dtsi > +++ b/arch/arm/boot/dts/bcm283x.dtsi > @@ -186,6 +186,13 @@ > interrupts = <2 14>; /* pwa1 */ > }; > > + thermal: thermal@0x7e212000 { After removing 0x here like in the binding doc you can add: Acked-by: Stefan Wahren <stefan.wahren@i2se.com> > + compatible = "brcm,bcm2835-thermal"; > + reg = <0x7e212000 0x8>; > + clocks = <&clocks BCM2835_CLOCK_TSENS>; > + status = "disabled"; > + }; > + > aux: aux@0x7e215000 { > compatible = "brcm,bcm2835-aux"; > #clock-cells = <1>; > -- > 2.1.4 > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index a78759e..0890d97 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -23,3 +23,9 @@ }; }; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2835-thermal"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 9d0651d..519a44f 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -76,3 +76,9 @@ interrupt-parent = <&local_intc>; interrupts = <8>; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2836-thermal"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b982522..2cc4847 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -186,6 +186,13 @@ interrupts = <2 14>; /* pwa1 */ }; + thermal: thermal@0x7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + status = "disabled"; + }; + aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>;