diff mbox

[V6,0/5] ECAM quirks handling for ARM64 platforms

Message ID 20160920192636.GB4941@localhost (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Bjorn Helgaas Sept. 20, 2016, 7:26 p.m. UTC
On Fri, Sep 09, 2016 at 09:24:02PM +0200, Tomasz Nowicki wrote:
> Quirk handling relies on an idea of simple static array which contains
> quirk enties. Each entry consists of identification information (IDs from
> standard header of MCFG table) along with custom pci_ecam_ops structure and 
> configuration space resource structure. This way it is possible find
> corresponding quirk entries and override pci_ecam_ops and PCI configuration
> space regions.
> 
> As an example, the last 3 patches present quirk handling mechanism usage for
> ThunderX.
> 
> v5 -> v6
> - rebase against v4.8-rc5
> - drop patch 1 form previous series
> - keep pci_acpi_setup_ecam_mapping() in ARM64 arch directory
> - move quirk code to pci_mcfg.c
> - restrict quirk to override pci_ecam_ops and CFG resource structure
>   only, no init call any more
> - split ThunderX quirks into the smaller chunks
> - add ThunderX pass1.x silicon revision support
> 
> v4 -> v5
> - rebase against v4.8-rc1
> - rework to exact MCFG OEM ID, TABLE ID, rev match
>   - use memcmp instead of strncmp
>   - no substring match
> - fix typos and dmesg message
> 
> Tomasz Nowicki (5):
>   PCI/ACPI: Extend pci_mcfg_lookup() responsibilities
>   PCI/ACPI: Check platform specific ECAM quirks
>   PCI: thunder-pem: Allow to probe PEM-specific register range for ACPI
>     case
>   PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon
>     version
>   PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x silicon
>     version
> 
>  arch/arm64/kernel/pci.c             |  17 ++--
>  drivers/acpi/pci_mcfg.c             | 168 +++++++++++++++++++++++++++++++++++-
>  drivers/pci/host/pci-thunder-ecam.c |   2 +-
>  drivers/pci/host/pci-thunder-pem.c  |  63 +++++++++++---
>  include/linux/pci-acpi.h            |   4 +-
>  include/linux/pci-ecam.h            |   7 ++
>  6 files changed, 230 insertions(+), 31 deletions(-)

I'm not quite ready to merge these because we haven't resolved the
question of how to expose the resources used by the memory-mapped
config space.  I'm fine with the first two patches (I did make a
couple trivial changes, see below), but there's no point in merging
them until we merge a user for them.

I pushed the series to pci/ecam-v6 for build testing and discussion.
The diff (the changes I made locally) from v6 as posted by Tomasz is
below.

Bjorn


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Christopher Covington Sept. 21, 2016, 1:15 a.m. UTC | #1
Hi Bjorn, Thomasz,

On 2016-09-20 15:26, Bjorn Helgaas wrote:
> On Fri, Sep 09, 2016 at 09:24:02PM +0200, Tomasz Nowicki wrote:
>> Quirk handling relies on an idea of simple static array which contains
>> quirk enties. Each entry consists of identification information (IDs 
>> from
>> standard header of MCFG table) along with custom pci_ecam_ops 
>> structure and
>> configuration space resource structure. This way it is possible find
>> corresponding quirk entries and override pci_ecam_ops and PCI 
>> configuration
>> space regions.
>> 
>> As an example, the last 3 patches present quirk handling mechanism 
>> usage for
>> ThunderX.
>> 
>> v5 -> v6
>> - rebase against v4.8-rc5
>> - drop patch 1 form previous series
>> - keep pci_acpi_setup_ecam_mapping() in ARM64 arch directory
>> - move quirk code to pci_mcfg.c
>> - restrict quirk to override pci_ecam_ops and CFG resource structure
>>   only, no init call any more
>> - split ThunderX quirks into the smaller chunks
>> - add ThunderX pass1.x silicon revision support
>> 
>> v4 -> v5
>> - rebase against v4.8-rc1
>> - rework to exact MCFG OEM ID, TABLE ID, rev match
>>   - use memcmp instead of strncmp
>>   - no substring match
>> - fix typos and dmesg message
>> 
>> Tomasz Nowicki (5):
>>   PCI/ACPI: Extend pci_mcfg_lookup() responsibilities
>>   PCI/ACPI: Check platform specific ECAM quirks
>>   PCI: thunder-pem: Allow to probe PEM-specific register range for 
>> ACPI
>>     case
>>   PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x 
>> silicon
>>     version
>>   PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x 
>> silicon
>>     version
>> 
>>  arch/arm64/kernel/pci.c             |  17 ++--
>>  drivers/acpi/pci_mcfg.c             | 168 
>> +++++++++++++++++++++++++++++++++++-
>>  drivers/pci/host/pci-thunder-ecam.c |   2 +-
>>  drivers/pci/host/pci-thunder-pem.c  |  63 +++++++++++---
>>  include/linux/pci-acpi.h            |   4 +-
>>  include/linux/pci-ecam.h            |   7 ++
>>  6 files changed, 230 insertions(+), 31 deletions(-)
> 
> I'm not quite ready to merge these because we haven't resolved the
> question of how to expose the resources used by the memory-mapped
> config space.  I'm fine with the first two patches (I did make a
> couple trivial changes, see below), but there's no point in merging
> them until we merge a user for them.
> 
> I pushed the series to pci/ecam-v6 for build testing and discussion.
> The diff (the changes I made locally) from v6 as posted by Tomasz is
> below.

Rebasing the following simple quirks framework user onto this branch,
I have some questions.

https://source.codeaurora.org/quic/server/kernel/commit/?h=cov/4.8-rc2-testing&id=83b766cafef11c107b10177d0626db311f382299

> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index eb14f74..bb3b8ad 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -42,86 +42,59 @@ struct mcfg_fixup {
>  	struct resource cfgres;
>  };
> 
> -#define MCFG_DOM_ANY			(-1)

Did you delete this because there were no current users, because you'd
prefer users just use "-1", or for some other reason?

>  #define MCFG_BUS_RANGE(start, end)	DEFINE_RES_NAMED((start),	\
>  						((end) - (start) + 1),	\
>  						NULL, IORESOURCE_BUS)
> -#define MCFG_BUS_ANY		MCFG_BUS_RANGE(0x0, 0xff)
> -#define MCFG_RES_EMPTY		DEFINE_RES_NAMED(0, 0, NULL, 0)
> +#define MCFG_BUS_ANY			MCFG_BUS_RANGE(0x0, 0xff)
> 
>  static struct mcfg_fixup mcfg_quirks[] = {
> -/*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
> +/*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, cfgres, ops }, */

This comment appears to have the order of cfgres and ops reversed.

Am I correct in reading that if a user of the framework does not wish to
override cfgres they must place a struct resource with .start = 0 at the
end of their mcfg_quirks entry? If so, I guess I have the same questions
about removing MCFG_RES_EMPTY as I do about removing MCFG_DOM_ANY.

Thanks,
Cov
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Sept. 21, 2016, 1:11 p.m. UTC | #2
On Tue, Sep 20, 2016 at 09:15:14PM -0400, cov@codeaurora.org wrote:
> Hi Bjorn, Thomasz,
> 
> On 2016-09-20 15:26, Bjorn Helgaas wrote:
> >On Fri, Sep 09, 2016 at 09:24:02PM +0200, Tomasz Nowicki wrote:
> >>Quirk handling relies on an idea of simple static array which contains
> >>quirk enties. Each entry consists of identification information
> >>(IDs from
> >>standard header of MCFG table) along with custom pci_ecam_ops
> >>structure and
> >>configuration space resource structure. This way it is possible find
> >>corresponding quirk entries and override pci_ecam_ops and PCI
> >>configuration
> >>space regions.
> >>
> >>As an example, the last 3 patches present quirk handling
> >>mechanism usage for
> >>ThunderX.
> >>
> >>v5 -> v6
> >>- rebase against v4.8-rc5
> >>- drop patch 1 form previous series
> >>- keep pci_acpi_setup_ecam_mapping() in ARM64 arch directory
> >>- move quirk code to pci_mcfg.c
> >>- restrict quirk to override pci_ecam_ops and CFG resource structure
> >>  only, no init call any more
> >>- split ThunderX quirks into the smaller chunks
> >>- add ThunderX pass1.x silicon revision support
> >>
> >>v4 -> v5
> >>- rebase against v4.8-rc1
> >>- rework to exact MCFG OEM ID, TABLE ID, rev match
> >>  - use memcmp instead of strncmp
> >>  - no substring match
> >>- fix typos and dmesg message
> >>
> >>Tomasz Nowicki (5):
> >>  PCI/ACPI: Extend pci_mcfg_lookup() responsibilities
> >>  PCI/ACPI: Check platform specific ECAM quirks
> >>  PCI: thunder-pem: Allow to probe PEM-specific register range
> >>for ACPI
> >>    case
> >>  PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x
> >>silicon
> >>    version
> >>  PCI: thunder: Enable ACPI PCI controller for ThunderX pass1.x
> >>silicon
> >>    version
> >>
> >> arch/arm64/kernel/pci.c             |  17 ++--
> >> drivers/acpi/pci_mcfg.c             | 168
> >>+++++++++++++++++++++++++++++++++++-
> >> drivers/pci/host/pci-thunder-ecam.c |   2 +-
> >> drivers/pci/host/pci-thunder-pem.c  |  63 +++++++++++---
> >> include/linux/pci-acpi.h            |   4 +-
> >> include/linux/pci-ecam.h            |   7 ++
> >> 6 files changed, 230 insertions(+), 31 deletions(-)
> >
> >I'm not quite ready to merge these because we haven't resolved the
> >question of how to expose the resources used by the memory-mapped
> >config space.  I'm fine with the first two patches (I did make a
> >couple trivial changes, see below), but there's no point in merging
> >them until we merge a user for them.
> >
> >I pushed the series to pci/ecam-v6 for build testing and discussion.
> >The diff (the changes I made locally) from v6 as posted by Tomasz is
> >below.
> 
> Rebasing the following simple quirks framework user onto this branch,
> I have some questions.
> 
> https://source.codeaurora.org/quic/server/kernel/commit/?h=cov/4.8-rc2-testing&id=83b766cafef11c107b10177d0626db311f382299
> 
> >diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> >index eb14f74..bb3b8ad 100644
> >--- a/drivers/acpi/pci_mcfg.c
> >+++ b/drivers/acpi/pci_mcfg.c
> >@@ -42,86 +42,59 @@ struct mcfg_fixup {
> > 	struct resource cfgres;
> > };
> >
> >-#define MCFG_DOM_ANY			(-1)
> 
> Did you delete this because there were no current users, because you'd
> prefer users just use "-1", or for some other reason?

I removed it because there were no users of it and, more importantly,
the code doesn't implement support for it.

> > #define MCFG_BUS_RANGE(start, end)	DEFINE_RES_NAMED((start),	\
> > 						((end) - (start) + 1),	\
> > 						NULL, IORESOURCE_BUS)
> >-#define MCFG_BUS_ANY		MCFG_BUS_RANGE(0x0, 0xff)
> >-#define MCFG_RES_EMPTY		DEFINE_RES_NAMED(0, 0, NULL, 0)
> >+#define MCFG_BUS_ANY			MCFG_BUS_RANGE(0x0, 0xff)
> >
> > static struct mcfg_fixup mcfg_quirks[] = {
> >-/*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
> >+/*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, cfgres, ops }, */
> 
> This comment appears to have the order of cfgres and ops reversed.

Fixed, thanks!

> Am I correct in reading that if a user of the framework does not wish to
> override cfgres they must place a struct resource with .start = 0 at the
> end of their mcfg_quirks entry? If so, I guess I have the same questions
> about removing MCFG_RES_EMPTY as I do about removing MCFG_DOM_ANY.

You're right that we only override cfgres if the quirk supplies a
struct resource with non-zero .start.  I removed MCFG_RES_EMPTY
because mcfg_quirks[] is a static array and is initialized with all
members being zero anyway.  If a quirk doesn't need to override
cfgres, I think it's more readable if the quirk just doesn't mention
the resource at all.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sinan Kaya Sept. 21, 2016, 2:07 p.m. UTC | #3
On 9/21/2016 9:11 AM, Bjorn Helgaas wrote:
> On Tue, Sep 20, 2016 at 09:15:14PM -0400, cov@codeaurora.org wrote:
>> Hi Bjorn, Thomasz,
>>

>>
>> Did you delete this because there were no current users, because you'd
>> prefer users just use "-1", or for some other reason?
> 
> I removed it because there were no users of it and, more importantly,
> the code doesn't implement support for it.

Is it possible to queue up Cov's patch as part of this effort once he 
rebases and sends an updated version? Cov will have to implement something
else now.
Bjorn Helgaas Sept. 21, 2016, 5:31 p.m. UTC | #4
On Wed, Sep 21, 2016 at 10:07:36AM -0400, Sinan Kaya wrote:
> On 9/21/2016 9:11 AM, Bjorn Helgaas wrote:
> > On Tue, Sep 20, 2016 at 09:15:14PM -0400, cov@codeaurora.org wrote:
> >> Hi Bjorn, Thomasz,
> >>
> 
> >>
> >> Did you delete this because there were no current users, because you'd
> >> prefer users just use "-1", or for some other reason?
> > 
> > I removed it because there were no users of it and, more importantly,
> > the code doesn't implement support for it.
> 
> Is it possible to queue up Cov's patch as part of this effort once he 
> rebases and sends an updated version? Cov will have to implement something
> else now.

I haven't see Cov's patch (patchwork doesn't follow URLs to git trees,
and I normally don't either).  If they show up on the mailing list,
I'll take a look, of course.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sinan Kaya Sept. 21, 2016, 5:34 p.m. UTC | #5
On 9/21/2016 1:31 PM, Bjorn Helgaas wrote:
> On Wed, Sep 21, 2016 at 10:07:36AM -0400, Sinan Kaya wrote:
>> On 9/21/2016 9:11 AM, Bjorn Helgaas wrote:
>>> On Tue, Sep 20, 2016 at 09:15:14PM -0400, cov@codeaurora.org wrote:
>>>> Hi Bjorn, Thomasz,
>>>>
>>
>>>>
>>>> Did you delete this because there were no current users, because you'd
>>>> prefer users just use "-1", or for some other reason?
>>>
>>> I removed it because there were no users of it and, more importantly,
>>> the code doesn't implement support for it.
>>
>> Is it possible to queue up Cov's patch as part of this effort once he 
>> rebases and sends an updated version? Cov will have to implement something
>> else now.
> 
> I haven't see Cov's patch (patchwork doesn't follow URLs to git trees,
> and I normally don't either).  If they show up on the mailing list,
> I'll take a look, of course.
> 
> Bjorn
> 

Thanks, I talked to Cov today. He's getting ready to post the rebased patch
once he completes testing.
Christopher Covington Sept. 21, 2016, 10:40 p.m. UTC | #6
Hi Bjorn,

On 09/21/2016 09:11 AM, Bjorn Helgaas wrote:
> On Tue, Sep 20, 2016 at 09:15:14PM -0400, cov@codeaurora.org wrote:

>>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>>> index eb14f74..bb3b8ad 100644
>>> --- a/drivers/acpi/pci_mcfg.c
>>> +++ b/drivers/acpi/pci_mcfg.c
>>> @@ -42,86 +42,59 @@ struct mcfg_fixup {
>>> 	struct resource cfgres;
>>> };
>>>
>>> -#define MCFG_DOM_ANY			(-1)
>>
>> Did you delete this because there were no current users, because you'd
>> prefer users just use "-1", or for some other reason?
> 
> I removed it because there were no users of it and, more importantly,
> the code doesn't implement support for it.

It looks like a stale "First match against PCI topology <domain:bus>..."
comment remains.

Thanks,
Cov
diff mbox

Patch

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index eb14f74..bb3b8ad 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -42,86 +42,59 @@  struct mcfg_fixup {
 	struct resource cfgres;
 };
 
-#define MCFG_DOM_ANY			(-1)
 #define MCFG_BUS_RANGE(start, end)	DEFINE_RES_NAMED((start),	\
 						((end) - (start) + 1),	\
 						NULL, IORESOURCE_BUS)
-#define MCFG_BUS_ANY		MCFG_BUS_RANGE(0x0, 0xff)
-#define MCFG_RES_EMPTY		DEFINE_RES_NAMED(0, 0, NULL, 0)
+#define MCFG_BUS_ANY			MCFG_BUS_RANGE(0x0, 0xff)
 
 static struct mcfg_fixup mcfg_quirks[] = {
-/*	{ OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
+/*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, cfgres, ops }, */
 #ifdef CONFIG_PCI_HOST_THUNDER_PEM
+#define THUNDER_PEM_MCFG(rev, seg, addr) 				\
+	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY,			\
+	  &pci_thunder_pem_ops, DEFINE_RES_MEM(addr, 0x39 * SZ_16M) }
+
 	/* SoC pass2.x */
-	{ "CAVIUM", "THUNDERX", 1, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 1, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+	THUNDER_PEM_MCFG(1,  4, 0x88001f000000UL),
+	THUNDER_PEM_MCFG(1,  5, 0x884057000000UL),
+	THUNDER_PEM_MCFG(1,  6, 0x88808f000000UL),
+	THUNDER_PEM_MCFG(1,  7, 0x89001f000000UL),
+	THUNDER_PEM_MCFG(1,  8, 0x894057000000UL),
+	THUNDER_PEM_MCFG(1,  9, 0x89808f000000UL),
+	THUNDER_PEM_MCFG(1, 14, 0x98001f000000UL),
+	THUNDER_PEM_MCFG(1, 15, 0x984057000000UL),
+	THUNDER_PEM_MCFG(1, 16, 0x98808f000000UL),
+	THUNDER_PEM_MCFG(1, 17, 0x99001f000000UL),
+	THUNDER_PEM_MCFG(1, 18, 0x994057000000UL),
+	THUNDER_PEM_MCFG(1, 19, 0x99808f000000UL),
 
 	/* SoC pass1.x */
-	{ "CAVIUM", "THUNDERX", 2, 4, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x88001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 5, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x884057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 6, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x88808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 7, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x89001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 8, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x894057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 9, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x89808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 14, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x98001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 15, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x984057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 16, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x98808f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 17, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x99001f000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 18, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x994057000000UL, 0x39 * SZ_16M) },
-	{ "CAVIUM", "THUNDERX", 2, 19, MCFG_BUS_ANY, &pci_thunder_pem_ops,
-	  DEFINE_RES_MEM(0x99808f000000UL, 0x39 * SZ_16M) },
+	THUNDER_PEM_MCFG(2,  4, 0x88001f000000UL),
+	THUNDER_PEM_MCFG(2,  5, 0x884057000000UL),
+	THUNDER_PEM_MCFG(2,  6, 0x88808f000000UL),
+	THUNDER_PEM_MCFG(2,  7, 0x89001f000000UL),
+	THUNDER_PEM_MCFG(2,  8, 0x894057000000UL),
+	THUNDER_PEM_MCFG(2,  9, 0x89808f000000UL),
+	THUNDER_PEM_MCFG(2, 14, 0x98001f000000UL),
+	THUNDER_PEM_MCFG(2, 15, 0x984057000000UL),
+	THUNDER_PEM_MCFG(2, 16, 0x98808f000000UL),
+	THUNDER_PEM_MCFG(2, 17, 0x99001f000000UL),
+	THUNDER_PEM_MCFG(2, 18, 0x994057000000UL),
+	THUNDER_PEM_MCFG(2, 19, 0x99808f000000UL),
 #endif
 #ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+#define THUNDER_ECAM_MCFG(rev, seg) 					\
+	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY, &pci_thunder_ecam_ops }
+
 	/* SoC pass1.x */
-	{ "CAVIUM", "THUNDERX", 2, 0, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 1, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 2, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 3, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 10, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 11, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 12, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
-	{ "CAVIUM", "THUNDERX", 2, 13, MCFG_BUS_ANY, &pci_thunder_ecam_ops,
-	  MCFG_RES_EMPTY},
+	THUNDER_ECAM_MCFG(2,  0),
+	THUNDER_ECAM_MCFG(2,  1),
+	THUNDER_ECAM_MCFG(2,  2),
+	THUNDER_ECAM_MCFG(2,  3),
+	THUNDER_ECAM_MCFG(2, 10),
+	THUNDER_ECAM_MCFG(2, 11),
+	THUNDER_ECAM_MCFG(2, 12),
+	THUNDER_ECAM_MCFG(2, 13),
 #endif
 };
 
@@ -141,12 +114,12 @@  static void pci_mcfg_match_quirks(struct acpi_pci_root *root,
 	 * table ID, and OEM revision from MCFG table standard header.
 	 */
 	for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
-		if (f->seg == root->segment &&
-		    resource_contains(&f->bus_range, &root->secondary) &&
-		    !memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
+		if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
 		    !memcmp(f->oem_table_id, mcfg_oem_table_id,
 		            ACPI_OEM_TABLE_ID_SIZE) &&
-		    f->oem_revision == mcfg_oem_revision) {
+		    f->oem_revision == mcfg_oem_revision &&
+		    f->seg == root->segment &&
+		    resource_contains(&f->bus_range, &root->secondary)) {
 			if (f->cfgres.start)
 				*cfgres = f->cfgres;
 			if (f->ops)
@@ -195,10 +168,10 @@  skip_lookup:
 	}
 
 	/*
-	 * Let to override default ECAM ops and CFG resource range.
-	 * Also, this might even retrieve CFG resource range in case MCFG
-	 * does not have it. Invalid CFG start address means MCFG firmware bug
-	 * or we need another quirk in array.
+	 * Allow quirks to override default ECAM ops and CFG resource
+	 * range.  This may even fabricate a CFG resource range in case
+	 * MCFG does not have it.  Invalid CFG start address means MCFG
+	 * firmware bug or we need another quirk in array.
 	 */
 	pci_mcfg_match_quirks(root, &res, &ops);
 	if (!res.start)
@@ -239,7 +212,7 @@  static __init int pci_mcfg_parse(struct acpi_table_header *header)
 	/* Save MCFG IDs and revision for quirks matching */
 	memcpy(mcfg_oem_id, header->oem_id, ACPI_OEM_ID_SIZE);
 	memcpy(mcfg_oem_table_id, header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
-	mcfg_oem_revision = header->revision;
+	mcfg_oem_revision = header->oem_revision;
 
 	pr_info("MCFG table detected, %d entries\n", n);
 	return 0;