diff mbox

[v2,1/2] media: adv7604: fix bindings inconsistency for default-input

Message ID 1474550340-31455-2-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Ulrich Hecht Sept. 22, 2016, 1:18 p.m. UTC 
The text states that default-input is an endpoint property, but in the
example it is a device property.

The default input is a property of the chip, not of a particular port, so
the example makes more sense.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Rob Herring (Arm) Sept. 23, 2016, 8:03 p.m. UTC | #1 
On Thu, Sep 22, 2016 at 03:18:59PM +0200, Ulrich Hecht wrote:
> The text states that default-input is an endpoint property, but in the
> example it is a device property.
> 
> The default input is a property of the chip, not of a particular port, so
> the example makes more sense.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 8337f75..9cbd92e 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -34,6 +34,7 @@  The digital output port node must contain at least one endpoint.
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+  - default-input: Select which input is selected after reset.
 
 Optional Endpoint Properties:
 
@@ -47,8 +48,6 @@  Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
-  - default-input: Select which input is selected after reset.
-
 Example:
 
 	hdmi_receiver@4c {