| Message ID | 1475216340-15344-3-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 30 September 2016 at 08:19, Shawn Lin <shawn.lin@rock-chips.com> wrote: > Per the vendor's requirement, we shouldn't do any setting for > 1.8V Signaling Enable, otherwise the interaction/behaviour between > phy and controller will be undefined. Mostly it works fine if we do > that, but we still see failures. Anyway, let's fix it to meet the > vendor's requirement. The error log looks like: > > [ 93.405085] mmc1: unexpected status 0x800900 after switch > [ 93.408474] mmc1: switch to bus width 1 failed > [ 93.408482] mmc1: mmc_select_hs200 failed, error -110 > [ 93.408492] mmc1: error -110 during resume (card was removed?) > [ 93.408705] PM: resume of devices complete after 213.453 msecs > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> > Reviewed-by: Douglas Anderson <dianders@chromium.org> Thanks, applied for fixes! Kind regards Uffe > --- > > Changes in v3: > - add tag from Adrian and Doug > > Changes in v2: None > > drivers/mmc/host/sdhci-of-arasan.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index da8e40a..1573a8d 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -265,6 +265,28 @@ void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) > } > } > > +static int sdhci_arasan_voltage_switch(struct mmc_host *mmc, > + struct mmc_ios *ios) > +{ > + switch (ios->signal_voltage) { > + case MMC_SIGNAL_VOLTAGE_180: > + /* > + * Plese don't switch to 1V8 as arasan,5.1 doesn't > + * actually refer to this setting to indicate the > + * signal voltage and the state machine will be broken > + * actually if we force to enable 1V8. That's something > + * like broken quirk but we could work around here. > + */ > + return 0; > + case MMC_SIGNAL_VOLTAGE_330: > + case MMC_SIGNAL_VOLTAGE_120: > + /* We don't support 3V3 and 1V2 */ > + break; > + } > + > + return -EINVAL; > +} > + > static struct sdhci_ops sdhci_arasan_ops = { > .set_clock = sdhci_arasan_set_clock, > .get_max_clock = sdhci_pltfm_clk_get_max_clock, > @@ -661,6 +683,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > > host->mmc_host_ops.hs400_enhanced_strobe = > sdhci_arasan_hs400_enhanced_strobe; > + host->mmc_host_ops.start_signal_voltage_switch = > + sdhci_arasan_voltage_switch; > } > > ret = sdhci_add_host(host); > -- > 2.3.7 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index da8e40a..1573a8d 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -265,6 +265,28 @@ void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) } } +static int sdhci_arasan_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_180: + /* + * Plese don't switch to 1V8 as arasan,5.1 doesn't + * actually refer to this setting to indicate the + * signal voltage and the state machine will be broken + * actually if we force to enable 1V8. That's something + * like broken quirk but we could work around here. + */ + return 0; + case MMC_SIGNAL_VOLTAGE_330: + case MMC_SIGNAL_VOLTAGE_120: + /* We don't support 3V3 and 1V2 */ + break; + } + + return -EINVAL; +} + static struct sdhci_ops sdhci_arasan_ops = { .set_clock = sdhci_arasan_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, @@ -661,6 +683,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev) host->mmc_host_ops.hs400_enhanced_strobe = sdhci_arasan_hs400_enhanced_strobe; + host->mmc_host_ops.start_signal_voltage_switch = + sdhci_arasan_voltage_switch; } ret = sdhci_add_host(host);