| Message ID | 1475853669-22480-3-git-send-email-pantelis.antoniou@konsulko.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Fri, Oct 07, 2016 at 06:21:01PM +0300, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@juniper.net> > > Add device tree bindings for the Juniper I2CS MFD driver. > > Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> > --- > Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68 ++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt > > diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt > new file mode 100644 > index 0000000..0ec103b > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt > @@ -0,0 +1,68 @@ > +Device-Tree bindings for Juniper Networks I2CS FPGA MFD > + > +Required properties: > +- compatible - Must be one of: > + "jnx,i2cs-rcb" (Routing Engine or Control Board FRUs) > + "jnx,i2cs-fpc" (Flexible Port Concentrator FRUs) > + "jnx,i2cs-sib" (Switching Interface Board FRUs) > + "jnx,i2cs-fan" (Fan Tray FRUs) > + > +Optional properties: > + > +Depending on the FRU, the I2CS MFD has varied group of sub-devices: > + > +Device Description > +------ ----------- > +jnx,i2cs-gpio : Virtual gpio mapping driver > +jnx,i2cs-fan-hwmon : hwmon driver for fan trays > +jnx,i2c-mux-i2cs : I2C Mux driver for FPC FRUs > +jnx,leds-i2cs : Led driver > + > +All these optional nodes are described in their respective binding > +documents. > + > +Example node: > + > +i2cs@54 { > + compatible = "jnx,i2cs-fpc"; > + reg = <0x54>; > + #address-cells = <0>; > + #size-cells = <0>; > + > + fpc2_mux { Generic node names please. mux { > + compatible = "jnx,i2c-mux-i2cs"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + fpc2i2c0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + }; > + > + fpc2_gpiomap: gpio-jnx-i2cs { gpio@54 { > + compatible = "jnx,gpio-i2cs"; > + reg = <0x54>; > + #gpio-cells = <2>; > + gpio-controller; > + interrupt-controller; > + > + /* > + * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7] > + * as gpio outputs > + */ > + i2c-gpio-map = <0x21 0x0f>; > + }; > + > + leds-jnx-i2cs { leds { > + compatible = "jnx,leds-i2cs"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + sib8-active { > + reg = <0>; > + linux,default-trigger = "sib8-active"; > + }; > + }; > +}; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, > On Oct 10, 2016, at 23:23 , Rob Herring <robh@kernel.org> wrote: > > On Fri, Oct 07, 2016 at 06:21:01PM +0300, Pantelis Antoniou wrote: >> From: Georgi Vlaev <gvlaev@juniper.net> >> >> Add device tree bindings for the Juniper I2CS MFD driver. >> >> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> >> [Ported from Juniper kernel] >> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> >> --- >> Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68 ++++++++++++++++++++++ >> 1 file changed, 68 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt >> >> diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt >> new file mode 100644 >> index 0000000..0ec103b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt >> @@ -0,0 +1,68 @@ >> +Device-Tree bindings for Juniper Networks I2CS FPGA MFD >> + >> +Required properties: >> +- compatible - Must be one of: >> + "jnx,i2cs-rcb" (Routing Engine or Control Board FRUs) >> + "jnx,i2cs-fpc" (Flexible Port Concentrator FRUs) >> + "jnx,i2cs-sib" (Switching Interface Board FRUs) >> + "jnx,i2cs-fan" (Fan Tray FRUs) >> + >> +Optional properties: >> + >> +Depending on the FRU, the I2CS MFD has varied group of sub-devices: >> + >> +Device Description >> +------ ----------- >> +jnx,i2cs-gpio : Virtual gpio mapping driver >> +jnx,i2cs-fan-hwmon : hwmon driver for fan trays >> +jnx,i2c-mux-i2cs : I2C Mux driver for FPC FRUs >> +jnx,leds-i2cs : Led driver >> + >> +All these optional nodes are described in their respective binding >> +documents. >> + >> +Example node: >> + >> +i2cs@54 { >> + compatible = "jnx,i2cs-fpc"; >> + reg = <0x54>; >> + #address-cells = <0>; >> + #size-cells = <0>; >> + >> + fpc2_mux { > > Generic node names please. > OK. > mux { > >> + compatible = "jnx,i2c-mux-i2cs"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + fpc2i2c0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + }; >> + >> + fpc2_gpiomap: gpio-jnx-i2cs { > > gpio@54 { > OK >> + compatible = "jnx,gpio-i2cs"; >> + reg = <0x54>; >> + #gpio-cells = <2>; >> + gpio-controller; >> + interrupt-controller; >> + >> + /* >> + * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7] >> + * as gpio outputs >> + */ >> + i2c-gpio-map = <0x21 0x0f>; >> + }; >> + >> + leds-jnx-i2cs { > > leds { > OK. >> + compatible = "jnx,leds-i2cs"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + sib8-active { >> + reg = <0>; >> + linux,default-trigger = "sib8-active"; >> + }; >> + }; >> +}; >> -- >> 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt new file mode 100644 index 0000000..0ec103b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt @@ -0,0 +1,68 @@ +Device-Tree bindings for Juniper Networks I2CS FPGA MFD + +Required properties: +- compatible - Must be one of: + "jnx,i2cs-rcb" (Routing Engine or Control Board FRUs) + "jnx,i2cs-fpc" (Flexible Port Concentrator FRUs) + "jnx,i2cs-sib" (Switching Interface Board FRUs) + "jnx,i2cs-fan" (Fan Tray FRUs) + +Optional properties: + +Depending on the FRU, the I2CS MFD has varied group of sub-devices: + +Device Description +------ ----------- +jnx,i2cs-gpio : Virtual gpio mapping driver +jnx,i2cs-fan-hwmon : hwmon driver for fan trays +jnx,i2c-mux-i2cs : I2C Mux driver for FPC FRUs +jnx,leds-i2cs : Led driver + +All these optional nodes are described in their respective binding +documents. + +Example node: + +i2cs@54 { + compatible = "jnx,i2cs-fpc"; + reg = <0x54>; + #address-cells = <0>; + #size-cells = <0>; + + fpc2_mux { + compatible = "jnx,i2c-mux-i2cs"; + #address-cells = <1>; + #size-cells = <0>; + + fpc2i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + fpc2_gpiomap: gpio-jnx-i2cs { + compatible = "jnx,gpio-i2cs"; + reg = <0x54>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + + /* + * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7] + * as gpio outputs + */ + i2c-gpio-map = <0x21 0x0f>; + }; + + leds-jnx-i2cs { + compatible = "jnx,leds-i2cs"; + #address-cells = <1>; + #size-cells = <0>; + + sib8-active { + reg = <0>; + linux,default-trigger = "sib8-active"; + }; + }; +};