| Message ID | 20161010224017.23362-1-mahoda.ratnayaka@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Tue, Oct 11, 2016 at 11:40:17AM +1300, Mahoda Ratnayaka wrote: > This patch adds lm87 hwmon device tree node documentation. > > Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> > --- > > Notes: > Changes since v1: > As suggested include all the changes are moved in > to the same patch and the all the optional properties > are now defined instead of using a single variable to > indicate those properties. > > Changes since v2: > Changed has-vcc-5v to use regulator binding and fixed > a minor copy paste mistake. > > Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt > new file mode 100644 > index 0000000..ce93d45 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt > @@ -0,0 +1,30 @@ > +*LM87 hwmon sensor. > + > +Required properties: > +- compatible: Should be > + "ti,lm87" > + > +- reg: I2C address > + > +optional properties: > +- has-temp3: This configures pins 18 and 19 to be used as a second > + remote temperature sensing channel. By default the pins > + are configured as voltage input pins in0 and in5. > + > +- has-in6: When set, pin 5 is configured to be used as voltage input > + in6. Otherwise the pin is set as FAN1 input. > + > +- has-in7: When set, pin 6 is configured to be used as voltage input > + in7. Otherwise the pin is set as FAN2 input. > + > +- vcc-supply: sets the nominal voltage for internal VCC measurement to 5V. > + Default is 3.3V. The description here needs updating. > + > +Example: > + > +lm87@2e { > + compatible = "ti,lm87"; > + reg = <0x2e>; > + has-temp3; > + vcc-supply = <®_5v0>; > +}; > -- > 2.10.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 0000000..ce93d45 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: sets the nominal voltage for internal VCC measurement to 5V. + Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +};
This patch adds lm87 hwmon device tree node documentation. Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> --- Notes: Changes since v1: As suggested include all the changes are moved in to the same patch and the all the optional properties are now defined instead of using a single variable to indicate those properties. Changes since v2: Changed has-vcc-5v to use regulator binding and fixed a minor copy paste mistake. Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt