| Message ID | 1477090375-13814-1-git-send-email-lina.iyer@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Friday, October 21, 2016 03:52:55 PM Lina Iyer wrote: > Update documentation to reflect the changes made to support IRQ safe PM > domains. > > Signed-off-by: Lina Iyer <lina.iyer@linaro.org> > Acked-by: Ulf Hansson <ulf.hansson@linaro.org> > --- > Changes since v3: > - Moved para to the end of the section > - Added clause for all IRQ safe devices in a domain > - Cleanup explanation of nested domains > --- > Documentation/power/devices.txt | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt > index 8ba6625..9218ce6 100644 > --- a/Documentation/power/devices.txt > +++ b/Documentation/power/devices.txt > @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put > into a low-power state together at the same time by turning off the shared > power resource. Of course, they also need to be put into the full-power state > together, by turning the shared power resource on. A set of devices with this > -property is often referred to as a power domain. > +property is often referred to as a power domain. A power domain may also be > +nested inside another power domain. The nested domain is referred to as the > +sub-domain of the parent domain. > > Support for power domains is provided through the pm_domain field of struct > device. This field is a pointer to an object of type struct dev_pm_domain, > @@ -629,6 +631,13 @@ support for power domains into subsystem-level callbacks, for example by > modifying the platform bus type. Other platforms need not implement it or take > it into account in any way. > > +Devices and PM domains may be defined as IRQ-safe, if they can be powered > +on/off even when the IRQs are disabled. What IRQ-safe means for devices is that their runtime PM callbacks may be invoked with interrupts disabled on the local CPU. I guess the meaning of IRQ-safe for PM domains is analogous, but the above isn't precise enough to me. > An IRQ-safe device in a domain will > +disallow power management on the domain, unless the domain is also defined as > +IRQ-safe. In other words, a domain containing all IRQ-safe devices must also > +be defined as IRQ-safe. Another restriction this framework imposes on the > +parent domain of an IRQ-safe domain is that the parent domain must also be > +defined as IRQ-safe. What about this: "Devices may be defined as IRQ-safe which indicates to the PM core that their runtime PM callbacks may be invoked with disabled interrupts (see Documentation/power/runtime_pm.txt for more information). If an IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be disallowed, unless the domain itself is defined as IRQ-safe. However, a PM domain can only be defined as IRQ-safe if all of the devices in it are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime PM of the parent is only allowed if the parent itself is IRQ-safe too with the additional restriction that all child domains of an IRQ-safe parent must also be IRQ-safe." Does it actually reflect what the code does? Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Oct 22 2016 at 18:19 -0600, Rafael J. Wysocki wrote: >On Friday, October 21, 2016 03:52:55 PM Lina Iyer wrote: >> Update documentation to reflect the changes made to support IRQ safe PM >> domains. >> >> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> >> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> >> --- >> Changes since v3: >> - Moved para to the end of the section >> - Added clause for all IRQ safe devices in a domain >> - Cleanup explanation of nested domains >> --- >> Documentation/power/devices.txt | 11 ++++++++++- >> 1 file changed, 10 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt >> index 8ba6625..9218ce6 100644 >> --- a/Documentation/power/devices.txt >> +++ b/Documentation/power/devices.txt >> @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put >> into a low-power state together at the same time by turning off the shared >> power resource. Of course, they also need to be put into the full-power state >> together, by turning the shared power resource on. A set of devices with this >> -property is often referred to as a power domain. >> +property is often referred to as a power domain. A power domain may also be >> +nested inside another power domain. The nested domain is referred to as the >> +sub-domain of the parent domain. >> >> Support for power domains is provided through the pm_domain field of struct >> device. This field is a pointer to an object of type struct dev_pm_domain, >> @@ -629,6 +631,13 @@ support for power domains into subsystem-level callbacks, for example by >> modifying the platform bus type. Other platforms need not implement it or take >> it into account in any way. >> >> +Devices and PM domains may be defined as IRQ-safe, if they can be powered >> +on/off even when the IRQs are disabled. > >What IRQ-safe means for devices is that their runtime PM callbacks may be >invoked with interrupts disabled on the local CPU. I guess the meaning of >IRQ-safe for PM domains is analogous, but the above isn't precise enough to me. > >> An IRQ-safe device in a domain will >> +disallow power management on the domain, unless the domain is also defined as >> +IRQ-safe. In other words, a domain containing all IRQ-safe devices must also >> +be defined as IRQ-safe. Another restriction this framework imposes on the >> +parent domain of an IRQ-safe domain is that the parent domain must also be >> +defined as IRQ-safe. > >What about this: > >"Devices may be defined as IRQ-safe which indicates to the PM core that their >runtime PM callbacks may be invoked with disabled interrupts (see >Documentation/power/runtime_pm.txt for more information). If an IRQ-safe >device belongs to a PM domain, the runtime PM of the domain will be disallowed, >unless the domain itself is defined as IRQ-safe. However, a PM domain can only >be defined as IRQ-safe if all of the devices in it are IRQ-safe. > This is correct. But the last line may need a bit of modification. If all devices in a PM domain are IRQ-safe and the domain is NOT, then it it is a valid combination just that the domain would never do runtime PM. > Moreover, if >an IRQ-safe domain has a parent domain, the runtime PM of the parent is only >allowed if the parent itself is IRQ-safe too with the additional restriction >that all child domains of an IRQ-safe parent must also be IRQ-safe." > >Does it actually reflect what the code does? > Yes, this precisely reflects the code. Thanks, Lina -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 24 2016 at 15:15 -0600, Rafael J. Wysocki wrote: >On Monday, October 24, 2016 10:16:05 AM Lina Iyer wrote: >> On Sat, Oct 22 2016 at 18:19 -0600, Rafael J. Wysocki wrote: >> >On Friday, October 21, 2016 03:52:55 PM Lina Iyer wrote: >> >> Update documentation to reflect the changes made to support IRQ safe PM >> >> domains. >> >> >> >> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> >> >> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> >> >> --- >> >> Changes since v3: >> >> - Moved para to the end of the section >> >> - Added clause for all IRQ safe devices in a domain >> >> - Cleanup explanation of nested domains >> >> --- >> >> Documentation/power/devices.txt | 11 ++++++++++- >> >> 1 file changed, 10 insertions(+), 1 deletion(-) >> >> >> >> diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt >> >> index 8ba6625..9218ce6 100644 >> >> --- a/Documentation/power/devices.txt >> >> +++ b/Documentation/power/devices.txt >> >> @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put >> >> into a low-power state together at the same time by turning off the shared >> >> power resource. Of course, they also need to be put into the full-power state >> >> together, by turning the shared power resource on. A set of devices with this >> >> -property is often referred to as a power domain. >> >> +property is often referred to as a power domain. A power domain may also be >> >> +nested inside another power domain. The nested domain is referred to as the >> >> +sub-domain of the parent domain. >> >> >> >> Support for power domains is provided through the pm_domain field of struct >> >> device. This field is a pointer to an object of type struct dev_pm_domain, >> >> @@ -629,6 +631,13 @@ support for power domains into subsystem-level callbacks, for example by >> >> modifying the platform bus type. Other platforms need not implement it or take >> >> it into account in any way. >> >> >> >> +Devices and PM domains may be defined as IRQ-safe, if they can be powered >> >> +on/off even when the IRQs are disabled. >> > >> >What IRQ-safe means for devices is that their runtime PM callbacks may be >> >invoked with interrupts disabled on the local CPU. I guess the meaning of >> >IRQ-safe for PM domains is analogous, but the above isn't precise enough to me. >> > >> >> An IRQ-safe device in a domain will >> >> +disallow power management on the domain, unless the domain is also defined as >> >> +IRQ-safe. In other words, a domain containing all IRQ-safe devices must also >> >> +be defined as IRQ-safe. Another restriction this framework imposes on the >> >> +parent domain of an IRQ-safe domain is that the parent domain must also be >> >> +defined as IRQ-safe. >> > >> >What about this: >> > >> >"Devices may be defined as IRQ-safe which indicates to the PM core that their >> >runtime PM callbacks may be invoked with disabled interrupts (see >> >Documentation/power/runtime_pm.txt for more information). If an IRQ-safe >> >device belongs to a PM domain, the runtime PM of the domain will be disallowed, >> >unless the domain itself is defined as IRQ-safe. However, a PM domain can only >> >be defined as IRQ-safe if all of the devices in it are IRQ-safe. >> > >> This is correct. But the last line may need a bit of modification. If >> all devices in a PM domain are IRQ-safe and the domain is NOT, then it >> it is a valid combination just that the domain would never do runtime >> PM. > >That doesn't contradict the last sentence of mine above. I guess what you mean >is that having a non-IRQ-safe device in an IRQ-safe domain is a valid >configuration. I wonder how it works then. :-) > >In any case, what about changing that sentence to something like: > >"However, it only makes sense to define a PM domain as IRQ-safe if all devices >in it are IRQ-safe." > That's precise. I will add your para instead of mine to the documentation. Thanks, Lina > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday, October 24, 2016 10:16:05 AM Lina Iyer wrote: > On Sat, Oct 22 2016 at 18:19 -0600, Rafael J. Wysocki wrote: > >On Friday, October 21, 2016 03:52:55 PM Lina Iyer wrote: > >> Update documentation to reflect the changes made to support IRQ safe PM > >> domains. > >> > >> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> > >> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> > >> --- > >> Changes since v3: > >> - Moved para to the end of the section > >> - Added clause for all IRQ safe devices in a domain > >> - Cleanup explanation of nested domains > >> --- > >> Documentation/power/devices.txt | 11 ++++++++++- > >> 1 file changed, 10 insertions(+), 1 deletion(-) > >> > >> diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt > >> index 8ba6625..9218ce6 100644 > >> --- a/Documentation/power/devices.txt > >> +++ b/Documentation/power/devices.txt > >> @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put > >> into a low-power state together at the same time by turning off the shared > >> power resource. Of course, they also need to be put into the full-power state > >> together, by turning the shared power resource on. A set of devices with this > >> -property is often referred to as a power domain. > >> +property is often referred to as a power domain. A power domain may also be > >> +nested inside another power domain. The nested domain is referred to as the > >> +sub-domain of the parent domain. > >> > >> Support for power domains is provided through the pm_domain field of struct > >> device. This field is a pointer to an object of type struct dev_pm_domain, > >> @@ -629,6 +631,13 @@ support for power domains into subsystem-level callbacks, for example by > >> modifying the platform bus type. Other platforms need not implement it or take > >> it into account in any way. > >> > >> +Devices and PM domains may be defined as IRQ-safe, if they can be powered > >> +on/off even when the IRQs are disabled. > > > >What IRQ-safe means for devices is that their runtime PM callbacks may be > >invoked with interrupts disabled on the local CPU. I guess the meaning of > >IRQ-safe for PM domains is analogous, but the above isn't precise enough to me. > > > >> An IRQ-safe device in a domain will > >> +disallow power management on the domain, unless the domain is also defined as > >> +IRQ-safe. In other words, a domain containing all IRQ-safe devices must also > >> +be defined as IRQ-safe. Another restriction this framework imposes on the > >> +parent domain of an IRQ-safe domain is that the parent domain must also be > >> +defined as IRQ-safe. > > > >What about this: > > > >"Devices may be defined as IRQ-safe which indicates to the PM core that their > >runtime PM callbacks may be invoked with disabled interrupts (see > >Documentation/power/runtime_pm.txt for more information). If an IRQ-safe > >device belongs to a PM domain, the runtime PM of the domain will be disallowed, > >unless the domain itself is defined as IRQ-safe. However, a PM domain can only > >be defined as IRQ-safe if all of the devices in it are IRQ-safe. > > > This is correct. But the last line may need a bit of modification. If > all devices in a PM domain are IRQ-safe and the domain is NOT, then it > it is a valid combination just that the domain would never do runtime > PM. That doesn't contradict the last sentence of mine above. I guess what you mean is that having a non-IRQ-safe device in an IRQ-safe domain is a valid configuration. I wonder how it works then. :-) In any case, what about changing that sentence to something like: "However, it only makes sense to define a PM domain as IRQ-safe if all devices in it are IRQ-safe." Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 8ba6625..9218ce6 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put into a low-power state together at the same time by turning off the shared power resource. Of course, they also need to be put into the full-power state together, by turning the shared power resource on. A set of devices with this -property is often referred to as a power domain. +property is often referred to as a power domain. A power domain may also be +nested inside another power domain. The nested domain is referred to as the +sub-domain of the parent domain. Support for power domains is provided through the pm_domain field of struct device. This field is a pointer to an object of type struct dev_pm_domain, @@ -629,6 +631,13 @@ support for power domains into subsystem-level callbacks, for example by modifying the platform bus type. Other platforms need not implement it or take it into account in any way. +Devices and PM domains may be defined as IRQ-safe, if they can be powered +on/off even when the IRQs are disabled. An IRQ-safe device in a domain will +disallow power management on the domain, unless the domain is also defined as +IRQ-safe. In other words, a domain containing all IRQ-safe devices must also +be defined as IRQ-safe. Another restriction this framework imposes on the +parent domain of an IRQ-safe domain is that the parent domain must also be +defined as IRQ-safe. Device Low Power (suspend) States ---------------------------------