| Message ID | 20160921112438.8661-1-maitysanchayan@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello, Ping? - Sanchayan. On 16-09-21 16:54:38, Sanchayan Maity wrote: > Add support for Toradex Colibri iMX6 module. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 253 ++++++++ > arch/arm/boot/dts/imx6qdl-colibri.dtsi | 890 +++++++++++++++++++++++++++ > 3 files changed, 1144 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-colibri.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f79cac2..44ff380 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -323,6 +323,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-aristainetos_7.dtb \ > imx6dl-aristainetos2_4.dtb \ > imx6dl-aristainetos2_7.dtb \ > + imx6dl-colibri-eval-v3.dtb \ > imx6dl-cubox-i.dtb \ > imx6dl-dfi-fs700-m60.dtb \ > imx6dl-gw51xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > new file mode 100644 > index 0000000..e0c2172 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > @@ -0,0 +1,253 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include "imx6dl.dtsi" > +#include "imx6qdl-colibri.dtsi" > + > +/ { > + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; > + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", > + "fsl,imx6dl"; > + > + aliases { > + i2c0 = &i2c2; > + i2c1 = &i2c3; > + }; > + > + aliases { > + rtc0 = &rtc_i2c; > + rtc1 = &snvs_rtc; > + }; > + > + clocks { > + /* Fixed crystal dedicated to mcp251x */ > + clk16m: clk@1 { > + compatible = "fixed-clock"; > + reg = <1>; > + #clock-cells = <0>; > + clock-frequency = <16000000>; > + clock-output-names = "clk16m"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + > + wakeup { > + label = "Wake-Up"; > + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ > + linux,code = <KEY_WAKEUP>; > + debounce-interval = <10>; > + wakeup-source; > + }; > + }; > + > + lcd_display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + #address-cells = <1>; > + #size-cells = <0>; > + interface-pix-fmt = "bgr666"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_lcdif>; > + status = "okay"; > + > + port@0 { > + reg = <0>; > + > + lcd_display_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + lcd_display_out: endpoint { > + remote-endpoint = <&lcd_panel_in>; > + }; > + }; > + }; > + > + panel: panel { > + /* > + * edt,et057090dhu: EDT 5.7" LCD TFT > + * edt,et070080dh6: EDT 7.0" LCD TFT > + */ > + compatible = "edt,et057090dhu"; > + backlight = <&backlight>; > + > + port { > + lcd_panel_in: endpoint { > + remote-endpoint = <&lcd_display_out>; > + }; > + }; > + }; > +}; > + > +&backlight { > + brightness-levels = <0 127 191 223 239 247 251 255>; > + default-brightness-level = <1>; > + status = "okay"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + status = "okay"; > + > + mcp251x0: mcp251x@1 { > + compatible = "microchip,mcp2515"; > + reg = <0>; > + clocks = <&clk16m>; > + interrupt-parent = <&gpio3>; > + interrupts = <27 0x2>; > + spi-max-frequency = <10000000>; > + status = "okay"; > + }; > +}; > + > +&hdmi { > + status = "okay"; > +}; > + > +/* > + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > + */ > +&i2c3 { > + status = "okay"; > + > + /* M41T0M6 real time clock on carrier board */ > + rtc_i2c: rtc@68 { > + compatible = "st,m41t00"; > + reg = <0x68>; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&lcd_display_in>; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&pwm3 { > + status = "okay"; > +}; > + > +&pwm4 { > + status = "okay"; > +}; > + > +®_usb_host_vbus { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&uart3 { > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_host_vbus>; > + status = "okay"; > +}; > + > +&usbotg { > + status = "okay"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mmc_cd>; > + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ > + status = "okay"; > +}; > + > +&weim { > + status = "okay"; > + > + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ > + ranges = <0 0 0x08000000 0x02000000 > + 1 0 0x0a000000 0x02000000 > + 2 0 0x0c000000 0x02000000>; > + > + /* SRAM on Colibri nEXT_CS0 */ > + sram@0,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <0 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > + 0x00000000 0x04000040 0x00000000>; > + }; > + > + /* SRAM on Colibri nEXT_CS1 */ > + sram@1,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <1 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > + 0x00000000 0x04000040 0x00000000>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > new file mode 100644 > index 0000000..e6faa65 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > @@ -0,0 +1,890 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + model = "Toradex Colibri iMX6DL/S Module"; > + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_bl_on>; > + pwms = <&pwm3 0 5000000>; > + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ > + status = "disabled"; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_2p5v: regulator-2p5v { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb_host_vbus: regulator-usb-host-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; > + regulator-name = "usb_host_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ > + status = "disabled"; > + }; > + > + sound { > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "imx6dl-colibri-sgtl5000"; > + ssi-controller = <&ssi1>; > + audio-codec = <&codec>; > + audio-routing = > + "Headphone Jack", "HP_OUT", > + "LINE_IN", "Line In Jack", > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias"; > + mux-int-port = <1>; > + mux-ext-port = <5>; > + }; > + > + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ > + sound_spdif: sound-spdif { > + compatible = "fsl,imx-audio-spdif"; > + model = "imx-spdif"; > + spdif-controller = <&spdif>; > + spdif-in; > + spdif-out; > + status = "disabled"; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; > + status = "okay"; > +}; > + > +/* Optional on SODIMM 55/63 */ > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + status = "disabled"; > +}; > + > +/* Optional on SODIMM 178/188 */ > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + status = "disabled"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + fsl,spi-num-chipselects = <1>; > + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi4>; > + status = "disabled"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + status = "okay"; > +}; > + > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hdmi_ddc>; > + status = "disabled"; > +}; > + > +/* > + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > + * touch screen controller > + */ > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic: pfuze100@08 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen1: unused */ > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen3: unused */ > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > + codec: sgtl5000@0a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + VDDA-supply = <®_2p5v>; > + VDDIO-supply = <®_3p3v>; > + }; > + > + /* STMPE811 touch screen controller */ > + stmpe811@41 { > + compatible = "st,stmpe811"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touch_int>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x41>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + interrupt-parent = <&gpio6>; > + interrupt-controller; > + id = <0>; > + blocks = <0x5>; > + irq-trigger = <0x1>; > + > + stmpe_touchscreen { > + compatible = "st,stmpe-ts"; > + reg = <0>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 8 sample average control */ > + st,ave-ctrl = <3>; > + /* 7 length fractional part in z */ > + st,fraction-z = <7>; > + /* > + * 50 mA typical 80 mA max touchscreen drivers > + * current limit value > + */ > + st,i-drive = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > + /* 1 ms panel driver settling time */ > + st,settling = <3>; > + /* 5 ms touch detect interrupt delay */ > + st,touch-det-delay = <5>; > + }; > + }; > +}; > + > +/* > + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > + */ > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "recovery"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_recovery>; > + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<B> */ > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<D> */ > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<A> */ > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<C> */ > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "disabled"; > +}; > + > +/* Optional S/PDIF out on SODIMM 137 */ > +&spdif { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spdif>; > + status = "disabled"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +/* Colibri UART_A */ > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_B */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_dte>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_C */ > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3_dte>; > + fsl,dte-mode; > + status = "disabled"; > +}; > + > +&usbotg { > + pinctrl-names = "default"; > + disable-over-current; > + dr_mode = "peripheral"; > + status = "disabled"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <4>; > + voltage-ranges = <3300 3300>; > + status = "disabled"; > +}; > + > +/* eMMC */ > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <8>; > + voltage-ranges = <3300 3300>; > + non-removable; > + status = "okay"; > +}; > + > +&weim { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 > + &pinctrl_weim_cs1 &pinctrl_weim_cs2 > + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; > + #address-cells = <2>; > + #size-cells = <1>; > + status = "disabled"; > +}; > + > +&iomuxc { > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 > + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 > + /* SGTL5000 sys_mclk */ > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 > + >; > + }; > + > + pinctrl_cam_mclk: cammclkgrp { > + fsl,pins = < > + /* Parallel Camera CAM sys_mclk */ > + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 > + >; > + }; > + > + pinctrl_ecspi4: ecspi4grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 > + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 > + /* SPI CS */ > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_gpio_bl_on: gpioblon { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 > + >; > + }; > + > + pinctrl_gpio_keys: gpiokeys { > + fsl,pins = < > + /* Power button */ > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 > + >; > + }; > + > + pinctrl_hdmi_ddc: hdmiddcgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3_recovery: i2c3recoverygrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 > + >; > + }; > + > + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ > + fsl,pins = < > + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 > + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 > + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 > + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 > + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 > + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 > + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 > + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 > + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 > + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 > + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 > + /* Disable PWM pins on camera interface */ > + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 > + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 > + >; > + }; > + > + pinctrl_ipu1_lcdif: ipu1lcdifgrp { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 > + >; > + }; > + > + pinctrl_mic_gnd: gpiomicgnd { > + fsl,pins = < > + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ > + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 > + >; > + }; > + > + pinctrl_mmc_cd: gpiommccd { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { > + fsl,pins = < > + /* USBH_EN */ > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 > + >; > + }; > + > + pinctrl_spdif: spdifgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 > + >; > + }; > + > + pinctrl_touch_int: gpiotouchintgrp { > + fsl,pins = < > + /* STMPE811 interrupt */ > + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 > + >; > + }; > + > + pinctrl_uart1_dce: uart1dcegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + /* DTE mode */ > + pinctrl_uart1_dte: uart1dtegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 > + >; > + }; > + > + /* Additional DTR, DSR, DCD */ > + pinctrl_uart1_ctrl: uart1ctrlgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 > + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 > + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 > + >; > + }; > + > + pinctrl_uart2_dte: uart2dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3_dte: uart3dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbc_det: usbcdetgrp { > + fsl,pins = < > + /* USBC_DET */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 > + /* USBC_DET_EN */ > + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 > + /* USBC_DET_OVERWRITE */ > + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 > + >; > + }; > + > + pinctrl_weim_cs0: weimcs0grp { > + fsl,pins = < > + /* nEXT_CS0 */ > + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs1: weimcs1grp { > + fsl,pins = < > + /* nEXT_CS1 */ > + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs2: weimcs2grp { > + fsl,pins = < > + /* nEXT_CS2 */ > + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_sram: weimsramgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 > + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 > + /* Data */ > + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 > + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 > + /* Address */ > + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 > + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 > + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 > + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 > + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 > + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 > + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 > + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 > + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 > + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 > + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 > + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 > + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 > + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 > + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 > + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 > + >; > + }; > + > + pinctrl_weim_rdnwr: weimrdnwr { > + fsl,pins = < > + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 > + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 > + >; > + }; > + > + pinctrl_weim_npwe: weimnpwe { > + fsl,pins = < > + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 > + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 > + >; > + }; > + > + /* ADDRESS[16:18] [25] used as GPIO */ > + pinctrl_weim_gpio_1: weimgpio-1 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[19:24] used as GPIO */ > + pinctrl_weim_gpio_2: weimgpio-2 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + >; > + }; > + > + /* DATA[16:31] used as GPIO */ > + pinctrl_weim_gpio_3: weimgpio-3 { > + fsl,pins = < > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 > + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 > + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 > + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 > + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 > + >; > + }; > + > + /* DQM[0:3] used as GPIO */ > + pinctrl_weim_gpio_4: weimgpio-4 { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 > + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 > + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 > + >; > + }; > + > + /* RDY used as GPIO */ > + pinctrl_weim_gpio_5: weimgpio-5 { > + fsl,pins = < > + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[16] DATA[30] used as GPIO */ > + pinctrl_weim_gpio_6: weimgpio-6 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 > + >; > + }; > +}; > -- > 2.10.0 >
On Wed, 2016-09-21 at 16:54 +0530, Sanchayan Maity wrote: > Add support for Toradex Colibri iMX6 module. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > --- >  arch/arm/boot/dts/Makefile                   |   1 + >  arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 253 ++++++++ >  arch/arm/boot/dts/imx6qdl-colibri.dtsi       | 890 > +++++++++++++++++++++++++++ >  3 files changed, 1144 insertions(+) >  create mode 100644 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts >  create mode 100644 arch/arm/boot/dts/imx6qdl-colibri.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f79cac2..44ff380 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -323,6 +323,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ >  imx6dl-aristainetos_7.dtb \ >  imx6dl-aristainetos2_4.dtb \ >  imx6dl-aristainetos2_7.dtb \ > + imx6dl-colibri-eval-v3.dtb \ >  imx6dl-cubox-i.dtb \ >  imx6dl-dfi-fs700-m60.dtb \ >  imx6dl-gw51xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > new file mode 100644 > index 0000000..e0c2172 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > @@ -0,0 +1,253 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this > dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + *  a) This file is free software; you can redistribute it and/or > + *     modify it under the terms of the GNU General Public License > + *     version 2 as published by the Free Software Foundation. > + * > + *     This file is distributed in the hope that it will be useful > + *     but WITHOUT ANY WARRANTY; without even the implied warranty > of > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the > + *     GNU General Public License for more details. > + * > + * Or, alternatively > + * > + *  b) Permission is hereby granted, free of charge, to any person > + *     obtaining a copy of this software and associated > documentation > + *     files (the "Software"), to deal in the Software without > + *     restriction, including without limitation the rights to use > + *     copy, modify, merge, publish, distribute, sublicense, and/or > + *     sell copies of the Software, and to permit persons to whom > the > + *     Software is furnished to do so, subject to the following > + *     conditions: > + * > + *     The above copyright notice and this permission notice shall > be > + *     included in all copies or substantial portions of the > Software. > + * > + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + *     OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include "imx6dl.dtsi" > +#include "imx6qdl-colibri.dtsi" > + > +/ { > + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation > Board V3"; > + compatible = "toradex,colibri_imx6dl-eval-v3", > "toradex,colibri_imx6dl", > +      "fsl,imx6dl"; > + > + aliases { > + i2c0 = &i2c2; > + i2c1 = &i2c3; > + }; > + > + aliases { > + rtc0 = &rtc_i2c; > + rtc1 = &snvs_rtc; > + }; > + > + clocks { > + /* Fixed crystal dedicated to mcp251x */ > + clk16m: clk@1 { > + compatible = "fixed-clock"; > + reg = <1>; > + #clock-cells = <0>; > + clock-frequency = <16000000>; > + clock-output-names = "clk16m"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + > + wakeup { > + label = "Wake-Up"; > + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* > SODIMM 45 */ > + linux,code = <KEY_WAKEUP>; > + debounce-interval = <10>; > + wakeup-source; > + }; > + }; > + > + lcd_display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + #address-cells = <1>; > + #size-cells = <0>; > + interface-pix-fmt = "bgr666"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_lcdif>; > + status = "okay"; > + > + port@0 { > + reg = <0>; > + > + lcd_display_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + lcd_display_out: endpoint { > + remote-endpoint = <&lcd_panel_in>; > + }; > + }; > + }; > + > + panel: panel { > + /* > +  * edt,et057090dhu: EDT 5.7" LCD TFT > +  * edt,et070080dh6: EDT 7.0" LCD TFT > +  */ > + compatible = "edt,et057090dhu"; > + backlight = <&backlight>; > + > + port { > + lcd_panel_in: endpoint { > + remote-endpoint = > <&lcd_display_out>; > + }; > + }; > + }; > +}; > + > +&backlight { > + brightness-levels = <0 127 191 223 239 247 251 255>; > + default-brightness-level = <1>; > + status = "okay"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + status = "okay"; > + > + mcp251x0: mcp251x@1 { > + compatible = "microchip,mcp2515"; > + reg = <0>; > + clocks = <&clk16m>; > + interrupt-parent = <&gpio3>; > + interrupts = <27 0x2>; > + spi-max-frequency = <10000000>; > + status = "okay"; > + }; > +}; > + > +&hdmi { > + status = "okay"; > +}; > + > +/* > + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier > board) > + */ > +&i2c3 { > + status = "okay"; > + > + /* M41T0M6 real time clock on carrier board */ > + rtc_i2c: rtc@68 { > + compatible = "st,m41t00"; > + reg = <0x68>; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&lcd_display_in>; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&pwm3 { > + status = "okay"; > +}; > + > +&pwm4 { > + status = "okay"; > +}; > + > +®_usb_host_vbus { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&uart3 { > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_host_vbus>; > + status = "okay"; > +}; > + > +&usbotg { > + status = "okay"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mmc_cd>; > + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ > + status = "okay"; > +}; > + > +&weim { > + status = "okay"; > + > + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ > + ranges = <0 0 0x08000000 0x02000000 > +   1 0 0x0a000000 0x02000000 > +   2 0 0x0c000000 0x02000000>; > + > + /* SRAM on Colibri nEXT_CS0 */ > + sram@0,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <0 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 > 0x04000000 > +       0x00000000 0x04000040 > 0x00000000>; > + }; > + > + /* SRAM on Colibri nEXT_CS1 */ > + sram@1,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <1 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 > 0x04000000 > +       0x00000000 0x04000040 > 0x00000000>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi > b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > new file mode 100644 > index 0000000..e6faa65 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > @@ -0,0 +1,890 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this > dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + *  a) This file is free software; you can redistribute it and/or > + *     modify it under the terms of the GNU General Public License > + *     version 2 as published by the Free Software Foundation. > + * > + *     This file is distributed in the hope that it will be useful > + *     but WITHOUT ANY WARRANTY; without even the implied warranty > of > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the > + *     GNU General Public License for more details. > + * > + * Or, alternatively > + * > + *  b) Permission is hereby granted, free of charge, to any person > + *     obtaining a copy of this software and associated > documentation > + *     files (the "Software"), to deal in the Software without > + *     restriction, including without limitation the rights to use > + *     copy, modify, merge, publish, distribute, sublicense, and/or > + *     sell copies of the Software, and to permit persons to whom > the > + *     Software is furnished to do so, subject to the following > + *     conditions: > + * > + *     The above copyright notice and this permission notice shall > be > + *     included in all copies or substantial portions of the > Software. > + * > + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE > WARRANTIES > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + *     OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + model = "Toradex Colibri iMX6DL/S Module"; > + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_bl_on>; > + pwms = <&pwm3 0 5000000>; > + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* > Colibri BL_ON */ > + status = "disabled"; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_2p5v: regulator-2p5v { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb_host_vbus: regulator-usb-host-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; > + regulator-name = "usb_host_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ > + status = "disabled"; > + }; > + > + sound { > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "imx6dl-colibri-sgtl5000"; > + ssi-controller = <&ssi1>; > + audio-codec = <&codec>; > + audio-routing = > + "Headphone Jack", "HP_OUT", > + "LINE_IN", "Line In Jack", > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias"; > + mux-int-port = <1>; > + mux-ext-port = <5>; > + }; > + > + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 > or 168 */ > + sound_spdif: sound-spdif { > + compatible = "fsl,imx-audio-spdif"; > + model = "imx-spdif"; > + spdif-controller = <&spdif>; > + spdif-in; > + spdif-out; > + status = "disabled"; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; > + status = "okay"; > +}; > + > +/* Optional on SODIMM 55/63 */ > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + status = "disabled"; > +}; > + > +/* Optional on SODIMM 178/188 */ > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + status = "disabled"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + fsl,spi-num-chipselects = <1>; > + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi4>; > + status = "disabled"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + status = "okay"; > +}; > + > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hdmi_ddc>; > + status = "disabled"; > +}; > + > +/* > + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > + * touch screen controller > + */ > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic: pfuze100@08 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen1: unused */ > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen3: unused */ > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > + codec: sgtl5000@0a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + VDDA-supply = <®_2p5v>; > + VDDIO-supply = <®_3p3v>; > + }; > + > + /* STMPE811 touch screen controller */ > + stmpe811@41 { > + compatible = "st,stmpe811"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touch_int>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x41>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + interrupt-parent = <&gpio6>; > + interrupt-controller; > + id = <0>; > + blocks = <0x5>; > + irq-trigger = <0x1>; > + > + stmpe_touchscreen { > + compatible = "st,stmpe-ts"; > + reg = <0>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 8 sample average control */ > + st,ave-ctrl = <3>; > + /* 7 length fractional part in z */ > + st,fraction-z = <7>; > + /* > +  * 50 mA typical 80 mA max touchscreen > drivers > +  * current limit value > +  */ > + st,i-drive = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > + /* 1 ms panel driver settling time */ > + st,settling = <3>; > + /* 5 ms touch detect interrupt delay */ > + st,touch-det-delay = <5>; > + }; > + }; > +}; > + > +/* > + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > + */ > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "recovery"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_recovery>; > + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<B> */ > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<D> */ > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<A> */ > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<C> */ > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "disabled"; > +}; > + > +/* Optional S/PDIF out on SODIMM 137 */ > +&spdif { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spdif>; > + status = "disabled"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +/* Colibri UART_A */ > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_B */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_dte>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_C */ > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3_dte>; > + fsl,dte-mode; > + status = "disabled"; > +}; > + > +&usbotg { > + pinctrl-names = "default"; > + disable-over-current; > + dr_mode = "peripheral"; > + status = "disabled"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <4>; > + voltage-ranges = <3300 3300>; > + status = "disabled"; > +}; > + > +/* eMMC */ > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <8>; > + voltage-ranges = <3300 3300>; > + non-removable; > + status = "okay"; > +}; > + > +&weim { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0 > +      &pinctrl_weim_cs1   &pinctrl_weim_cs2 > +      &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; > + #address-cells = <2>; > + #size-cells = <1>; > + status = "disabled"; > +}; > + > +&iomuxc { > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b > 0 > + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 > + /* SGTL5000 sys_mclk */ > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 > + >; > + }; > + > + pinctrl_cam_mclk: cammclkgrp { > + fsl,pins = < > + /* Parallel Camera CAM sys_mclk */ > + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b > 0 > + >; > + }; > + > + pinctrl_ecspi4: ecspi4grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100 > b1 > + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100 > b1 > + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 > + /* SPI CS */ > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b > 1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDC__ENET_MDC > 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO > 0x1b0b0 > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0 > x1b0b0 > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0 > x1b0b0 > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1 > b0b0 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1 > b0b0 > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0 > x1b0b0 > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0 > x1b0b0 > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x > 1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30 > ) | 0x1b0b0) > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX > 0x1b0b0 > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX > 0x1b0b0 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b > 0b0 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b > 0b0 > + >; > + }; > + > + pinctrl_gpio_bl_on: gpioblon { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 > 0x1b0b0 > + >; > + }; > + > + pinctrl_gpio_keys: gpiokeys { > + fsl,pins = < > + /* Power button */ > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 > 0x1b0b0 > + >; > + }; > + > + pinctrl_hdmi_ddc: hdmiddcgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL > 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA > 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3_recovery: i2c3recoverygrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 > + >; > + }; > + > + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ > + fsl,pins = < > + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 > 0xb0b1 > + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 > 0xb0b1 > + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 > 0xb0b1 > + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 > 0xb0b1 > + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 > 0xb0b1 > + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 > 0xb0b1 > + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 > 0xb0b1 > + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 > 0xb0b1 > + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK > 0xb0b1 > + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0 > xb0b1 > + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0 > xb0b1 > + /* Disable PWM pins on camera interface */ > + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 > 0x40 > + MX6QDL_PAD_GPIO_1__GPIO1_IO01 > 0x40 > + >; > + }; > + > + pinctrl_ipu1_lcdif: ipu1lcdifgrp { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK > 0xa1 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 > 0xa1 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 > 0xa1 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 > 0xa1 > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 > 0xa1 > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 > 0xa1 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 > 0xa1 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 > 0xa1 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 > 0xa1 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 > 0xa1 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 > 0xa1 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 > 0xa1 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 > 0xa1 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 > 0xa1 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 > 0xa1 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 > 0xa1 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 > 0xa1 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 > 0xa1 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 > 0xa1 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 > 0xa1 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 > 0xa1 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 > 0xa1 > + >; > + }; > + > + pinctrl_mic_gnd: gpiomicgnd { > + fsl,pins = < > + /* Controls Mic GND, PU or '1' pull Mic GND > to GND */ > + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 > + >; > + }; > + > + pinctrl_mmc_cd: gpiommccd { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x800 > 00000 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x0004 > 0 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x0004 > 0 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { > + fsl,pins = < > + /* USBH_EN */ > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f05 > 8 > + >; > + }; > + > + pinctrl_spdif: spdifgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 > + >; > + }; > + > + pinctrl_touch_int: gpiotouchintgrp { > + fsl,pins = < > + /* STMPE811 interrupt */ > + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 > + >; > + }; > + > + pinctrl_uart1_dce: uart1dcegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + /* DTE mode */ > + pinctrl_uart1_dte: uart1dtegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0 > b1 > + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 > + >; > + }; > + > + /* Additional DTR, DSR, DCD */ > + pinctrl_uart1_ctrl: uart1ctrlgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 > + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 > + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 > + >; > + }; > + > + pinctrl_uart2_dte: uart2dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x > 1b0b1 > + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x > 1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b > 0b1 > + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b > 0b1 > + >; > + }; > + > + pinctrl_uart3_dte: uart3dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1 > b0b1 > + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1 > b0b1 > + >; > + }; > + > + pinctrl_usbc_det: usbcdetgrp { > + fsl,pins = < > + /* USBC_DET */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 > 0x1b0b0 > + /* USBC_DET_EN */ > + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0 > x0f058 > + /* USBC_DET_OVERWRITE */ > + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f > 058 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x1707 > 1 > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x1707 > 1 > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x1707 > 1 > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x1707 > 1 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x1705 > 9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x1705 > 9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b > 9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b > 9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b > 9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b > 9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b > 9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b > 9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b > 9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b > 9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f > 9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f > 9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f > 9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f > 9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f > 9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f > 9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f > 9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f > 9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 > + >; > + }; > + > + pinctrl_weim_cs0: weimcs0grp { > + fsl,pins = < > + /* nEXT_CS0 */ > + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs1: weimcs1grp { > + fsl,pins = < > + /* nEXT_CS1 */ > + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs2: weimcs2grp { > + fsl,pins = < > + /* nEXT_CS2 */ > + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_sram: weimsramgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_OE__EIM_OE_B 0 > xb0b1 > + MX6QDL_PAD_EIM_RW__EIM_RW 0xb > 0b1 > + /* Data */ > + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0 > x1b0b0 > + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b > 0b0 > + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1 > b0b0 > + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1 > b0b0 > + /* Address */ > + MX6QDL_PAD_EIM_DA15__EIM_AD15 > 0xb0b1 > + MX6QDL_PAD_EIM_DA14__EIM_AD14 > 0xb0b1 > + MX6QDL_PAD_EIM_DA13__EIM_AD13 > 0xb0b1 > + MX6QDL_PAD_EIM_DA12__EIM_AD12 > 0xb0b1 > + MX6QDL_PAD_EIM_DA11__EIM_AD11 > 0xb0b1 > + MX6QDL_PAD_EIM_DA10__EIM_AD10 > 0xb0b1 > + MX6QDL_PAD_EIM_DA9__EIM_AD09 > 0xb0b1 > + MX6QDL_PAD_EIM_DA8__EIM_AD08 > 0xb0b1 > + MX6QDL_PAD_EIM_DA7__EIM_AD07 > 0xb0b1 > + MX6QDL_PAD_EIM_DA6__EIM_AD06 > 0xb0b1 > + MX6QDL_PAD_EIM_DA5__EIM_AD05 > 0xb0b1 > + MX6QDL_PAD_EIM_DA4__EIM_AD04 > 0xb0b1 > + MX6QDL_PAD_EIM_DA3__EIM_AD03 > 0xb0b1 > + MX6QDL_PAD_EIM_DA2__EIM_AD02 > 0xb0b1 > + MX6QDL_PAD_EIM_DA1__EIM_AD01 > 0xb0b1 > + MX6QDL_PAD_EIM_DA0__EIM_AD00 > 0xb0b1 > + >; > + }; > + > + pinctrl_weim_rdnwr: weimrdnwr { > + fsl,pins = < > + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 > 0x0040 > + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x13 > 0b0 > + >; > + }; > + > + pinctrl_weim_npwe: weimnpwe { > + fsl,pins = < > + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 > 0x0040 > + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x13 > 0b0 > + >; > + }; > + > + /* ADDRESS[16:18] [25] used as GPIO */ > + pinctrl_weim_gpio_1: weimgpio-1 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 > 0x1b0b0 > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 > 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 > 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x > 1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 > 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[19:24] used as GPIO */ > + pinctrl_weim_gpio_2: weimgpio-2 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 > 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 > 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x > 1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x > 1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 > 0x1b0b0 > + >; > + }; > + > + /* DATA[16:31] used as GPIO */ > + pinctrl_weim_gpio_3: weimgpio-3 { > + fsl,pins = < > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 > 0x1b0b0 > + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 > 0x1b0b0 > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b > 0b0 > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b > 0b0 > + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b > 0b0 > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b > 0b0 > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1 > b0b0 > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b > 0b0 > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b > 0b0 > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 > 0x1b0b0 > + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b > 0b0 > + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x > 1b0b0 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 > 0x1b0b0 > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 > 0x1b0b0 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 > 0x1b0b0 > + >; > + }; > + > + /* DQM[0:3] used as GPIO */ > + pinctrl_weim_gpio_4: weimgpio-4 { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 > 0x1b0b0 > + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 > 0x1b0b0 > + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 > 0x1b0b0 > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 > 0x1b0b0 > + >; > + }; > + > + /* RDY used as GPIO */ > + pinctrl_weim_gpio_5: weimgpio-5 { > + fsl,pins = < > + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 > 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[16] DATA[30] used as GPIO */ > + pinctrl_weim_gpio_6: weimgpio-6 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 > 0x1b0b0 > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 > 0x1b0b0 > + >; > + }; > +};
Hello, Ping? - Sanchayan. On 16-09-21 16:54:38, Sanchayan Maity wrote: > Add support for Toradex Colibri iMX6 module. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 253 ++++++++ > arch/arm/boot/dts/imx6qdl-colibri.dtsi | 890 +++++++++++++++++++++++++++ > 3 files changed, 1144 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-colibri.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f79cac2..44ff380 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -323,6 +323,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-aristainetos_7.dtb \ > imx6dl-aristainetos2_4.dtb \ > imx6dl-aristainetos2_7.dtb \ > + imx6dl-colibri-eval-v3.dtb \ > imx6dl-cubox-i.dtb \ > imx6dl-dfi-fs700-m60.dtb \ > imx6dl-gw51xx.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > new file mode 100644 > index 0000000..e0c2172 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts > @@ -0,0 +1,253 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include "imx6dl.dtsi" > +#include "imx6qdl-colibri.dtsi" > + > +/ { > + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; > + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", > + "fsl,imx6dl"; > + > + aliases { > + i2c0 = &i2c2; > + i2c1 = &i2c3; > + }; > + > + aliases { > + rtc0 = &rtc_i2c; > + rtc1 = &snvs_rtc; > + }; > + > + clocks { > + /* Fixed crystal dedicated to mcp251x */ > + clk16m: clk@1 { > + compatible = "fixed-clock"; > + reg = <1>; > + #clock-cells = <0>; > + clock-frequency = <16000000>; > + clock-output-names = "clk16m"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + > + wakeup { > + label = "Wake-Up"; > + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ > + linux,code = <KEY_WAKEUP>; > + debounce-interval = <10>; > + wakeup-source; > + }; > + }; > + > + lcd_display: display@di0 { > + compatible = "fsl,imx-parallel-display"; > + #address-cells = <1>; > + #size-cells = <0>; > + interface-pix-fmt = "bgr666"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_lcdif>; > + status = "okay"; > + > + port@0 { > + reg = <0>; > + > + lcd_display_in: endpoint { > + remote-endpoint = <&ipu1_di0_disp0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + lcd_display_out: endpoint { > + remote-endpoint = <&lcd_panel_in>; > + }; > + }; > + }; > + > + panel: panel { > + /* > + * edt,et057090dhu: EDT 5.7" LCD TFT > + * edt,et070080dh6: EDT 7.0" LCD TFT > + */ > + compatible = "edt,et057090dhu"; > + backlight = <&backlight>; > + > + port { > + lcd_panel_in: endpoint { > + remote-endpoint = <&lcd_display_out>; > + }; > + }; > + }; > +}; > + > +&backlight { > + brightness-levels = <0 127 191 223 239 247 251 255>; > + default-brightness-level = <1>; > + status = "okay"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + status = "okay"; > + > + mcp251x0: mcp251x@1 { > + compatible = "microchip,mcp2515"; > + reg = <0>; > + clocks = <&clk16m>; > + interrupt-parent = <&gpio3>; > + interrupts = <27 0x2>; > + spi-max-frequency = <10000000>; > + status = "okay"; > + }; > +}; > + > +&hdmi { > + status = "okay"; > +}; > + > +/* > + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > + */ > +&i2c3 { > + status = "okay"; > + > + /* M41T0M6 real time clock on carrier board */ > + rtc_i2c: rtc@68 { > + compatible = "st,m41t00"; > + reg = <0x68>; > + }; > +}; > + > +&ipu1_di0_disp0 { > + remote-endpoint = <&lcd_display_in>; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&pwm3 { > + status = "okay"; > +}; > + > +&pwm4 { > + status = "okay"; > +}; > + > +®_usb_host_vbus { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&uart3 { > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_host_vbus>; > + status = "okay"; > +}; > + > +&usbotg { > + status = "okay"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mmc_cd>; > + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ > + status = "okay"; > +}; > + > +&weim { > + status = "okay"; > + > + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ > + ranges = <0 0 0x08000000 0x02000000 > + 1 0 0x0a000000 0x02000000 > + 2 0 0x0c000000 0x02000000>; > + > + /* SRAM on Colibri nEXT_CS0 */ > + sram@0,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <0 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > + 0x00000000 0x04000040 0x00000000>; > + }; > + > + /* SRAM on Colibri nEXT_CS1 */ > + sram@1,0 { > + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; > + reg = <1 0 0x00010000>; > + #address-cells = <1>; > + #size-cells = <1>; > + bank-width = <2>; > + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 > + 0x00000000 0x04000040 0x00000000>; > + }; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > new file mode 100644 > index 0000000..e6faa65 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi > @@ -0,0 +1,890 @@ > +/* > + * Copyright 2014-2016 Toradex AG > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + model = "Toradex Colibri iMX6DL/S Module"; > + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_bl_on>; > + pwms = <&pwm3 0 5000000>; > + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ > + status = "disabled"; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1P8V"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_2p5v: regulator-2p5v { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb_host_vbus: regulator-usb-host-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; > + regulator-name = "usb_host_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ > + status = "disabled"; > + }; > + > + sound { > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "imx6dl-colibri-sgtl5000"; > + ssi-controller = <&ssi1>; > + audio-codec = <&codec>; > + audio-routing = > + "Headphone Jack", "HP_OUT", > + "LINE_IN", "Line In Jack", > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias"; > + mux-int-port = <1>; > + mux-ext-port = <5>; > + }; > + > + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ > + sound_spdif: sound-spdif { > + compatible = "fsl,imx-audio-spdif"; > + model = "imx-spdif"; > + spdif-controller = <&spdif>; > + spdif-in; > + spdif-out; > + status = "disabled"; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; > + status = "okay"; > +}; > + > +/* Optional on SODIMM 55/63 */ > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + status = "disabled"; > +}; > + > +/* Optional on SODIMM 178/188 */ > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + status = "disabled"; > +}; > + > +/* Colibri SSP */ > +&ecspi4 { > + fsl,spi-num-chipselects = <1>; > + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi4>; > + status = "disabled"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rmii"; > + status = "okay"; > +}; > + > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hdmi_ddc>; > + status = "disabled"; > +}; > + > +/* > + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and > + * touch screen controller > + */ > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic: pfuze100@08 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen1: unused */ > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* vgen3: unused */ > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > + > + codec: sgtl5000@0a { > + compatible = "fsl,sgtl5000"; > + reg = <0x0a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + VDDA-supply = <®_2p5v>; > + VDDIO-supply = <®_3p3v>; > + }; > + > + /* STMPE811 touch screen controller */ > + stmpe811@41 { > + compatible = "st,stmpe811"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_touch_int>; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x41>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + interrupt-parent = <&gpio6>; > + interrupt-controller; > + id = <0>; > + blocks = <0x5>; > + irq-trigger = <0x1>; > + > + stmpe_touchscreen { > + compatible = "st,stmpe-ts"; > + reg = <0>; > + /* 3.25 MHz ADC clock speed */ > + st,adc-freq = <1>; > + /* 8 sample average control */ > + st,ave-ctrl = <3>; > + /* 7 length fractional part in z */ > + st,fraction-z = <7>; > + /* > + * 50 mA typical 80 mA max touchscreen drivers > + * current limit value > + */ > + st,i-drive = <1>; > + /* 12-bit ADC */ > + st,mod-12b = <1>; > + /* internal ADC reference */ > + st,ref-sel = <0>; > + /* ADC converstion time: 80 clocks */ > + st,sample-time = <4>; > + /* 1 ms panel driver settling time */ > + st,settling = <3>; > + /* 5 ms touch detect interrupt delay */ > + st,touch-det-delay = <5>; > + }; > + }; > +}; > + > +/* > + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) > + */ > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "recovery"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_recovery>; > + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<B> */ > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<D> */ > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<A> */ > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; > + status = "disabled"; > +}; > + > +/* Colibri PWM<C> */ > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "disabled"; > +}; > + > +/* Optional S/PDIF out on SODIMM 137 */ > +&spdif { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spdif>; > + status = "disabled"; > +}; > + > +&ssi1 { > + status = "okay"; > +}; > + > +/* Colibri UART_A */ > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_B */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_dte>; > + fsl,dte-mode; > + uart-has-rtscts; > + status = "disabled"; > +}; > + > +/* Colibri UART_C */ > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3_dte>; > + fsl,dte-mode; > + status = "disabled"; > +}; > + > +&usbotg { > + pinctrl-names = "default"; > + disable-over-current; > + dr_mode = "peripheral"; > + status = "disabled"; > +}; > + > +/* Colibri MMC */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <4>; > + voltage-ranges = <3300 3300>; > + status = "disabled"; > +}; > + > +/* eMMC */ > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + vqmmc-supply = <®_3p3v>; > + bus-width = <8>; > + voltage-ranges = <3300 3300>; > + non-removable; > + status = "okay"; > +}; > + > +&weim { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 > + &pinctrl_weim_cs1 &pinctrl_weim_cs2 > + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; > + #address-cells = <2>; > + #size-cells = <1>; > + status = "disabled"; > +}; > + > +&iomuxc { > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 > + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 > + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 > + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 > + /* SGTL5000 sys_mclk */ > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 > + >; > + }; > + > + pinctrl_cam_mclk: cammclkgrp { > + fsl,pins = < > + /* Parallel Camera CAM sys_mclk */ > + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 > + >; > + }; > + > + pinctrl_ecspi4: ecspi4grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 > + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 > + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 > + /* SPI CS */ > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) > + >; > + }; > + > + pinctrl_flexcan1: flexcan1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_gpio_bl_on: gpioblon { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 > + >; > + }; > + > + pinctrl_gpio_keys: gpiokeys { > + fsl,pins = < > + /* Power button */ > + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 > + >; > + }; > + > + pinctrl_hdmi_ddc: hdmiddcgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3_recovery: i2c3recoverygrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 > + >; > + }; > + > + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ > + fsl,pins = < > + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 > + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 > + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 > + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 > + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 > + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 > + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 > + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 > + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 > + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 > + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 > + /* Disable PWM pins on camera interface */ > + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 > + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 > + >; > + }; > + > + pinctrl_ipu1_lcdif: ipu1lcdifgrp { > + fsl,pins = < > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 > + >; > + }; > + > + pinctrl_mic_gnd: gpiomicgnd { > + fsl,pins = < > + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ > + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 > + >; > + }; > + > + pinctrl_mmc_cd: gpiommccd { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 > + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { > + fsl,pins = < > + /* USBH_EN */ > + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 > + >; > + }; > + > + pinctrl_spdif: spdifgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 > + >; > + }; > + > + pinctrl_touch_int: gpiotouchintgrp { > + fsl,pins = < > + /* STMPE811 interrupt */ > + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 > + >; > + }; > + > + pinctrl_uart1_dce: uart1dcegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + /* DTE mode */ > + pinctrl_uart1_dte: uart1dtegrp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 > + >; > + }; > + > + /* Additional DTR, DSR, DCD */ > + pinctrl_uart1_ctrl: uart1ctrlgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 > + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 > + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 > + >; > + }; > + > + pinctrl_uart2_dte: uart2dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 > + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3_dte: uart3dtegrp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbc_det: usbcdetgrp { > + fsl,pins = < > + /* USBC_DET */ > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 > + /* USBC_DET_EN */ > + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 > + /* USBC_DET_OVERWRITE */ > + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 > + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 > + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 > + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 > + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 > + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 > + /* eMMC reset */ > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 > + >; > + }; > + > + pinctrl_weim_cs0: weimcs0grp { > + fsl,pins = < > + /* nEXT_CS0 */ > + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs1: weimcs1grp { > + fsl,pins = < > + /* nEXT_CS1 */ > + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_cs2: weimcs2grp { > + fsl,pins = < > + /* nEXT_CS2 */ > + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 > + >; > + }; > + > + pinctrl_weim_sram: weimsramgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 > + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 > + /* Data */ > + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 > + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 > + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 > + /* Address */ > + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 > + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 > + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 > + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 > + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 > + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 > + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 > + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 > + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 > + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 > + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 > + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 > + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 > + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 > + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 > + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 > + >; > + }; > + > + pinctrl_weim_rdnwr: weimrdnwr { > + fsl,pins = < > + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 > + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 > + >; > + }; > + > + pinctrl_weim_npwe: weimnpwe { > + fsl,pins = < > + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 > + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 > + >; > + }; > + > + /* ADDRESS[16:18] [25] used as GPIO */ > + pinctrl_weim_gpio_1: weimgpio-1 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[19:24] used as GPIO */ > + pinctrl_weim_gpio_2: weimgpio-2 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 > + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 > + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 > + >; > + }; > + > + /* DATA[16:31] used as GPIO */ > + pinctrl_weim_gpio_3: weimgpio-3 { > + fsl,pins = < > + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 > + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 > + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 > + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 > + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 > + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 > + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 > + >; > + }; > + > + /* DQM[0:3] used as GPIO */ > + pinctrl_weim_gpio_4: weimgpio-4 { > + fsl,pins = < > + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 > + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 > + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 > + >; > + }; > + > + /* RDY used as GPIO */ > + pinctrl_weim_gpio_5: weimgpio-5 { > + fsl,pins = < > + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 > + >; > + }; > + > + /* ADDRESS[16] DATA[30] used as GPIO */ > + pinctrl_weim_gpio_6: weimgpio-6 { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 > + >; > + }; > +}; > -- > 2.10.0 >
On Wed, Sep 21, 2016 at 04:54:38PM +0530, Sanchayan Maity wrote: > Add support for Toradex Colibri iMX6 module. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f79cac2..44ff380 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -323,6 +323,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ + imx6dl-colibri-eval-v3.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts new file mode 100644 index 0000000..e0c2172 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -0,0 +1,253 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + clocks { + /* Fixed crystal dedicated to mcp251x */ + clk16m: clk@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; + + mcp251x0: mcp251x@1 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio3>; + interrupts = <27 0x2>; + spi-max-frequency = <10000000>; + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + status = "okay"; +}; + +&weim { + status = "okay"; + + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000>; + + /* SRAM on Colibri nEXT_CS0 */ + sram@0,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <0 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; + + /* SRAM on Colibri nEXT_CS1 */ + sram@1,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <1 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi new file mode 100644 index 0000000..e6faa65 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -0,0 +1,890 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Toradex Colibri iMX6DL/S Module"; + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; + pwms = <&pwm3 0 5000000>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ + status = "disabled"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + status = "disabled"; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6dl-colibri-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; + + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ + sound_spdif: sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + status = "disabled"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; + status = "okay"; +}; + +/* Optional on SODIMM 55/63 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +/* Optional on SODIMM 178/188 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Colibri SSP */ +&ecspi4 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ddc>; + status = "disabled"; +}; + +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* vgen1: unused */ + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vgen3: unused */ + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio6>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; +}; + +/* + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +/* Colibri PWM<B> */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +/* Colibri PWM<D> */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +/* Colibri PWM<A> */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +/* Colibri PWM<C> */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +/* Optional S/PDIF out on SODIMM 137 */ +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "disabled"; +}; + +&ssi1 { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_B */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_C */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + disable-over-current; + dr_mode = "peripheral"; + status = "disabled"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vqmmc-supply = <®_3p3v>; + bus-width = <4>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 + &pinctrl_weim_cs1 &pinctrl_weim_cs2 + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_cam_mclk: cammclkgrp { + fsl,pins = < + /* Parallel Camera CAM sys_mclk */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblon { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeys { + fsl,pins = < + /* Power button */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + >; + }; + + pinctrl_hdmi_ddc: hdmiddcgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ + fsl,pins = < + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 + /* Disable PWM pins on camera interface */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + >; + }; + + pinctrl_ipu1_lcdif: ipu1lcdifgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 + >; + }; + + pinctrl_mic_gnd: gpiomicgnd { + fsl,pins = < + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 + >; + }; + + pinctrl_mmc_cd: gpiommccd { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + fsl,pins = < + /* USBH_EN */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touch_int: gpiotouchintgrp { + fsl,pins = < + /* STMPE811 interrupt */ + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 + >; + }; + + pinctrl_uart1_dce: uart1dcegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart1_dte: uart1dtegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + >; + }; + + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2_dte: uart2dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3_dte: uart3dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + /* USBC_DET */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 + /* USBC_DET_OVERWRITE */ + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + /* nEXT_CS0 */ + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_cs1: weimcs1grp { + fsl,pins = < + /* nEXT_CS1 */ + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 + >; + }; + + pinctrl_weim_cs2: weimcs2grp { + fsl,pins = < + /* nEXT_CS2 */ + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + /* Data */ + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwr { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + >; + }; + + pinctrl_weim_npwe: weimnpwe { + fsl,pins = < + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + >; + }; + + /* ADDRESS[16:18] [25] used as GPIO */ + pinctrl_weim_gpio_1: weimgpio-1 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* ADDRESS[19:24] used as GPIO */ + pinctrl_weim_gpio_2: weimgpio-2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* DATA[16:31] used as GPIO */ + pinctrl_weim_gpio_3: weimgpio-3 { + fsl,pins = < + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + /* DQM[0:3] used as GPIO */ + pinctrl_weim_gpio_4: weimgpio-4 { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + /* RDY used as GPIO */ + pinctrl_weim_gpio_5: weimgpio-5 { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 + >; + }; + + /* ADDRESS[16] DATA[30] used as GPIO */ + pinctrl_weim_gpio_6: weimgpio-6 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; +};
Add support for Toradex Colibri iMX6 module. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 253 ++++++++ arch/arm/boot/dts/imx6qdl-colibri.dtsi | 890 +++++++++++++++++++++++++++ 3 files changed, 1144 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts create mode 100644 arch/arm/boot/dts/imx6qdl-colibri.dtsi