| Message ID | 1478164390-21613-2-git-send-email-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Thu 03 Nov 02:13 PDT 2016, Linus Walleij wrote: > Some nodes are referencing the pm8058_gpio as IRQ parent, but > the HW IRQ offset they are supplying is actually that for the > parent to that controller: the PM8058 itself. Since that is the > proper parent, reference it directly. > > We can switch this to the pm8058_gpio and the proper offset > once we have fixed the SSBI GPIO driver to properly deal with > the hierarchical IRQ domain and get proper local offset > translation. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > index 4a532ddab53a..ea660ffa03ea 100644 > --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts > @@ -369,8 +369,8 @@ > ak8975@0c { > compatible = "asahi-kasei,ak8975"; > reg = <0x0c>; > - /* GPIO33 has interrupt 224 on the PM8058 */ > - interrupt-parent = <&pm8058_gpio>; > + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ > + interrupt-parent = <&pm8058>; > interrupts = <224 IRQ_TYPE_EDGE_RISING>; > pinctrl-names = "default"; > pinctrl-0 = <&dragon_ak8975_gpios>; > @@ -380,8 +380,8 @@ > bmp085@77 { > compatible = "bosch,bmp085"; > reg = <0x77>; > - /* GPIO16 has interrupt 207 on the PM8058 */ > - interrupt-parent = <&pm8058_gpio>; > + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ > + interrupt-parent = <&pm8058>; > interrupts = <207 IRQ_TYPE_EDGE_RISING>; > reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; > pinctrl-names = "default"; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4a532ddab53a..ea660ffa03ea 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -369,8 +369,8 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <224 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; @@ -380,8 +380,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <207 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default";
Some nodes are referencing the pm8058_gpio as IRQ parent, but the HW IRQ offset they are supplying is actually that for the parent to that controller: the PM8058 itself. Since that is the proper parent, reference it directly. We can switch this to the pm8058_gpio and the proper offset once we have fixed the SSBI GPIO driver to properly deal with the hierarchical IRQ domain and get proper local offset translation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)