| Message ID | 1478238680-11310-2-git-send-email-rick.chang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Rick, Thank you for the patch. On Friday 04 Nov 2016 13:51:18 Rick Chang wrote: > Add a DT binding documentation for Mediatek JPEG Decoder of > MT2701 SoC. This version looks much better ! > Signed-off-by: Rick Chang <rick.chang@mediatek.com> > Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> > --- > .../bindings/media/mediatek-jpeg-codec.txt | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > > diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt new file > mode 100644 > index 0000000..b2b19ed > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > @@ -0,0 +1,35 @@ > +* Mediatek JPEG Decoder > + > +Mediatek JPEG Decoder is the JPEG decode hw present in Mediatek SoCs Nitpicking, I'd write hardware instead of hw. > +Required properties: > +- compatible : "mediatek,mt2701-jpgdec" As commented on the previous version, is this JPEG decoder unique to the MT2701, or is it also used (possibly with different interrupts, clocks, ...) in other SoCs ? In the latter case, if the JPEG decoder IP core is identical in multiple SoCs, a more generic compatible string would be better. > +- reg : physical base address of the jpeg decoder registers and length of > + memory mapped region. > +- interrupts : interrupt number to the interrupt controller. > +- clocks: device clocks, see > + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > +- clock-names: must contain "jpgdec-smi" and "jpgdec". > +- power-domains: a phandle to the power domain, see > + Documentation/devicetree/bindings/power/power_domain.txt for details. > +- mediatek,larb: must contain the local arbiters in the current Socs, see > + > Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > + for details. > +- iommus: should point to the respective IOMMU block with master port as > + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > + for details. > + > +Example: > + jpegdec: jpegdec@15004000 { > + compatible = "mediatek,mt2701-jpgdec"; > + reg = <0 0x15004000 0 0x1000>; > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, > + <&imgsys CLK_IMG_JPGDEC>; > + clock-names = "jpgdec-smi", > + "jpgdec"; > + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; > + mediatek,larb = <&larb2>; > + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, > + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; > + };
Hi Laurent, Thanks for your prompt reply. I will fix them in patch v4. On Sat, 2016-11-05 at 01:32 +0200, Laurent Pinchart wrote: > Hi Rick, > > Thank you for the patch. > > On Friday 04 Nov 2016 13:51:18 Rick Chang wrote: > > Add a DT binding documentation for Mediatek JPEG Decoder of > > MT2701 SoC. > > This version looks much better ! I'm glad to hear that! > > Signed-off-by: Rick Chang <rick.chang@mediatek.com> > > Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> > > --- > > .../bindings/media/mediatek-jpeg-codec.txt | 35 +++++++++++++++++++ > > 1 file changed, 35 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > > > > diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > > b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt new file > > mode 100644 > > index 0000000..b2b19ed > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt > > @@ -0,0 +1,35 @@ > > +* Mediatek JPEG Decoder > > + > > +Mediatek JPEG Decoder is the JPEG decode hw present in Mediatek SoCs > > Nitpicking, I'd write hardware instead of hw. OK. > > +Required properties: > > +- compatible : "mediatek,mt2701-jpgdec" > > As commented on the previous version, is this JPEG decoder unique to the > MT2701, or is it also used (possibly with different interrupts, clocks, ...) > in other SoCs ? In the latter case, if the JPEG decoder IP core is identical > in multiple SoCs, a more generic compatible string would be better. I understand your question. The essence of this patch series targeting is the JPEG decoder IP which is integrated in mt2701.I will check it with our hardware engineer and making a more generic compatible string if the IP is used in multiple SoCs. > > +- reg : physical base address of the jpeg decoder registers and length of > > + memory mapped region. > > +- interrupts : interrupt number to the interrupt controller. > > +- clocks: device clocks, see > > + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. > > +- clock-names: must contain "jpgdec-smi" and "jpgdec". > > +- power-domains: a phandle to the power domain, see > > + Documentation/devicetree/bindings/power/power_domain.txt for details. > > +- mediatek,larb: must contain the local arbiters in the current Socs, see > > + > > Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt > > + for details. > > +- iommus: should point to the respective IOMMU block with master port as > > + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt > > + for details. > > + > > +Example: > > + jpegdec: jpegdec@15004000 { > > + compatible = "mediatek,mt2701-jpgdec"; > > + reg = <0 0x15004000 0 0x1000>; > > + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; > > + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, > > + <&imgsys CLK_IMG_JPGDEC>; > > + clock-names = "jpgdec-smi", > > + "jpgdec"; > > + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; > > + mediatek,larb = <&larb2>; > > + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, > > + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; > > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt new file mode 100644 index 0000000..b2b19ed --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-codec.txt @@ -0,0 +1,35 @@ +* Mediatek JPEG Decoder + +Mediatek JPEG Decoder is the JPEG decode hw present in Mediatek SoCs + +Required properties: +- compatible : "mediatek,mt2701-jpgdec" +- reg : physical base address of the jpeg decoder registers and length of + memory mapped region. +- interrupts : interrupt number to the interrupt controller. +- clocks: device clocks, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- clock-names: must contain "jpgdec-smi" and "jpgdec". +- power-domains: a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. +- mediatek,larb: must contain the local arbiters in the current Socs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. +- iommus: should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. + +Example: + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + };